I need to multiply the result of the 3 if statements as shown below in one cell Each of these 3 if statements output an integer and I need to multiply the value of each of these 3 output integers to get the final output integer. syntax of multiplying if statements outputting an integer?
On one of the reports which i am doing to identify the series of values for a single input data. In the attached spreadsheet there are 2 tables, table 1 has complete data with column a is the lookup value and column b is output value
I have to fill the table 2 in the same manner as shown in the attached template. there could be many different for a single lookup value but i am targeting to look for the 1st 9 matches and last matched value. eg. if i am looking for the value 9 which has 15 different values i want to display the 1st 9 matches (p,q,r,s,t,u,v,w,x and ad - being the 15th match)
Not sure whether this could be possible by using formulas?
I am looking to create an excel search with two input and three output values on Sheet 1 that will link to a table on Sheet 2. To help illustrate:
Sheet 1:
The two white cells indicate the two input values, and the three blue cells indicate the three desired output values.
Sheet 2:
I want to enter the two input values (Length and Width), press the "Search" button, and have the corresponding output values (DWG#, Item #, and Tooling #) from Sheet 2 appear in the three output cells on Sheet 1.
I have three IF statements as below. the problem is if the first statement is true I want it to skip the next two statements or the result will be changed again.
So, another question with regards to this sales sheet that i am setting up. I want to be able to take the information below and for each of the people listed (i.e. by their initials) i would like to...
1.) Take their associated % (Columns C, E, G) 2.) Multiply the % by the Revenue (Column H) 3.) Sum up the total for each of the names (Locatedin Columns B, D, F) 4.) Only sum up the ones that occur in Month 1 of the Year 2012
I have tried multiple ways with a Sumproduct but none of them have worked. I would love to be able to do this with a single formula without having to add another column, for instance, to track what MonthNum it is. I tried using some kind of offset, but i could never get it to work.. For instance to look through the range, find the initial go over 1 column to the right and multiply that % by the revenue if the Month is 1..
Date (A)Rec1Name (B)Rec1Pct (C)Rec2Name (D)Rec2Pct (E)Rec3Name (F)Rec3Pct (G)Revenue (H)1/1/12AD25.00%RU25.00%BF25.00%1000.001/1/12AD25.00%RU25.00%PNF25.00%2000.001/1/12BF50.00%00.00%00.00%1200.002/1/12BF50.00%00.00%00.00%1000.002/1/12BF50.00%00.00%00.00%1000.003/1/12AD25.00%RU25.00%00.00%1000.003/1/12AD25.00%RU25.00%00.00%1500.004/1/12AD16.67%RU16.67%BF16.67%1500.004/1/12BF50.00%00.00%00.00%1500.00
Attached is a sample of a ledger I am making for my small business. Under the ' books' column, having the output display nothing for a row with no entry was simple, but I can't figure out how to have three different displays for the 'bank' column. The idea of this ledger is that I can continuously balance my books by entering the check mark as transactions are posted. The thing is, I don't want to have the balance display all the way down the sheet when there are no entries in those rows.
I am working with the attached sheet and it is made up of groups of rows that alternate with a 6 digit NAICS code (industry code) then an aggregation of those codes into a more general 3 digit NAICS. I need to have the row with the 3 digit NAICS code calculate a number that multiplies a column called "% of industry" by several columns of of numbers and then sums the result into a cell in that 3 digit NAICS row. Different groupings have different numbers of rows. I would like to know if there is a 1 cell formula that can achieve this and be easily copied down the sheet to the other 3 digit NAICS rows.
You can see in row 37 this formula being executed for a simple 2 row aggregation. But that would take forever to replicate down the sheet, especially for the larger aggregations.
An example for row 32 that achieves the desired result and could be easily copied down the sheet.
Is there a way to write a forumula that read, if it's January, add column A1:A10, if it's February, add column A1:B10, if it's March, add column A1:C10 and it's April, add column A1:D10
I have attached a sample spreadsheet for your review. I think I need to combine multiple IF statements into one single statement. See column I:
There is currently a formula in Column I that looks at Column H and computes a ROUND formula based on this information. Unfortunately, this formula only works if Column J says "MB". If Column J says "Minutes" then I need Column I to compute with this formula: =IF(H2<30,0.5,ROUNDUP(H2/60,1))
How can I combine this with the current formula to get what I am looking for? Here is the current formula (for MB): =IF(H2<0.125,0.125,ROUND(H2,4))
I have attached a copy of my monthly work schedule. Sorry if it looks too noobish but I am. The question I have is on the schedule right now, it uses to of the same schedule, one is called request off and the other the final. The request off right now is where all changes are made, and they reflect on the final. I did it this way because I could not figure out how to make the cells autofill according to the day of the week, like if it was friday i needed it to fill in the shifts and normal days off automatically.
What I am trying to do now is eliminate the need for the second schedule, the request off one. I think I have figured out how to have the cells autofilled according to the day of the week, and also let the user enter in other stuff such as sick, vacation or whatever, and have it autofill if the cell is left blank, using vba. this is what i have so far, and it is working I was just wondering if it was possible to set it up for a range of cells instead of having to enter each one in manually.
If my input page B13 is either New Lease In-House or New Lease w/Co-Borker andmy input page B43 is - then take cell D57 in my Analysis report, mulitply it by cell B32 from Input page and divide it by 2, otherwise, take cell D57 on the analysis report, mulitply it by B42 on Input page and divide it by 4. I think I have a mess up with my brackets. This is what I have: =IF((OR('Input Page'!B13="New Lease In-House",'Input Page'!B13="New Lease w/Co-Broker"))AND('Input Page'!B43="-",'Analysis Report'!D57*'Input Page'!B32/2,'Analysis Report'!D57*'Input Page'!B32/"4")
I want to create a formula that will turn B2 in floors if A2 has /1 with its formula, Ceilings if it has /2, walls if it has /3, and M&E if it has /4. For example 456-401/2-1569 in cell A2 will populate ceilings in B2. I know I can create If statements but I can only figure out how to do this to search for one text and populate one word. I know Vlookup is possible but this spread sheet will be blank and as people populate there information I need the cells to automatically populate the data into the B column. how I can create the right formula?
I would like to add an AND function so that the IF statement also looks at the month which is represented in this case as $E$7, the formula I have been trying is:
I have a userform with 14 independant checkboxes on and would like it when the operator presses the 'go' button for the code to look at each box and if ticked put a "Y" in the column on a spreadsheet associated with that checkbox.
I have this portion of code set for each checkbox within the sub function, but it's a lot of code for something relatively simple:
I have are two listboxes set up, one with all the states, the other with 7 possible variable selections. So in my case I have 371 (DC, Virgin Islands and Puerto Rico are included as states in this) possible combinations here. With each combo the user needs to be able to enter up to 2 years of quarterly data (8 quarters, so 2968 pieces of data possible) and then press a button to save that data to a specified location which I will need to access at run of the overall macro.
Is there an easier way to do this then to simply assign each combination a cell? Maybe an If State = AK and Variable = TUR then find column = AK & row = TUR (per quarter) type solution?
I'm using one spreadsheet "Take Off", to pull data from a cell which dictates an objects shape, based on this shape I have a very large IF statement that pulls data from an adjacent cell where an objects dimensions are entered, the statement than proceeds to use these dimensions to calculate the weight of the object.
I've run into the problem with only 7 IF statements, I have gone online and tried to figure out how to avoid this since it is a common problem, but I can't figure out how to do it, most of the examples show very simple and basic formulas. I am unable to figure out how to translate this into my IF statement where I make reference to many cells as well as us differant formulas within the IF statement.
My latest solution was to breakdown the IF statements and try to my my own functions but I think I am too green to have done this properly. Any guidance would be greatly appreciated.
The following is the code I'm working with followed by how I tried to remedy the situation:
and so on until hCalc, but when I put them together in a cell like this: =aCalc()+bCalc()+cCalc()+dCalc()+eCalc().... I get an error #REF.
I realize a problem might be that I'm referencing a specific cell within my formulas, and many examples online show cells referenced in the form =A$1$, is there a differant way for referencing a cell, because currently I rely on Excel to automatically do this by way of relative reference.
ADDED: Ok I scrapped making the functions because I'm not sure and I did some research on VBA so I tried this one:
Function Weight(Shape As String, Amount As Double, Dimension As String, Optional Length As Variant) If (Shape = "BPLT" Or Shape = "L") Then If (Amount > 5) Then Weight = Get_Word(Dimension, "First") / 1000 + Get_Word(Dimension, 3) / 1000 + Get_Word(Dimension, 5) / 1000 * Get_Word(Dimension, "Last") * 7850 Else Weight = Get_Word(Dimension, "First") / 1000 + Get_Word(Dimension, 3) / 1000 * Get_Word(Dimension, "Last") * 7850 End If
But when I try to put Weight(C6,D6,F6,E6) I run into the error "Sub or Function Not Defined"
I have a worksheet and in one of my columns I can have multiple values, this could either be a valid numeric value, .e.g "Trace" or a value such as >1.5 or it could be blank.
Depending on the value I then want to return a different result in another cell.
In the example I have tried my data is in cell E8
I have tried the following formula and failed miserably, I'm not sure whether IF or IF OR can cope with this.
Here is the first required formula, which will go in cell P7:
If N7>=75 a value of "Y" should be returned. If not, a value of "N" should be returned. BUT if N7 is blank, a blank should be returned.
Here is the second required formula, which is more complicated, and will go in cell Q7:
(1) If Cell P7="Y", then a "Y" needs to be returned in the cell. (2) If Cell O7>=2, then a "Y" needs to be returned in the cell. If not, then a "N" needs to be returned. (3) If Cell P7 is blank, then the cell needs to remain blank.
Here is the final formula, which will go at the bottom of the page.
I need the Q column to return an average of the number of "Y" values, not counting the blanks as numbers. (For instance, if there were 18 "Y"s, 2 "N"s, and one blank, the value returned would be 0.90.).
Im looking to make a formula that states if b3 =10 then a. if b3=12 then b, if b3= 14, then c, if b3=16 then d. A, B, C, D are referring to links to another sheet.
I'm running a macro with multiple statements for hiding columns, and it has been running well for years, now today i'm getting a error message in the macro while debugging that states "Unable to set the Hidden property of the Range class", and when I reset the macro, and try to manually hide the range, I get the error message "Cannot shift objects off sheet".
