Nested If: Width Of A Shoe
Mar 19, 2009Column E has several variables D, EW, B, M, W. All of these pertain to a the width of a shoe.
D = Medium
EW = Wide
B = Narrow
M = Medium (Ladies)
W = Wide (Ladies)
Column E has several variables D, EW, B, M, W. All of these pertain to a the width of a shoe.
D = Medium
EW = Wide
B = Narrow
M = Medium (Ladies)
W = Wide (Ladies)
I'm an excel novice. I am trying to create a chart that assigns a range of foot measurements to each shoe size, but the data I am working with has only one measurement for each shoe size. Example: The data I have says:
size 7 = 250mm
size 7.5 = 255 mm
size 8 = 260 mm
So I want to create a formula, so the chart reads something like:
size 7 = 247.5mm - 252.5mm
size 7.5 = 252.5mm - 257.5mm
size 8 = 257.5mm - 262.5mm
I'm using ms excel 2003 on windows vista
Is it possible to adjust a cells' column width without the whole column width changing? EXAMPLE...I'm looking to lock rows 1-41 at certain column widths and change the column width as needed from rows 42 and below.
View 4 Replies View RelatedGot two spreadsheets that should be identical, and in both the column widths ARE identical - when you look at the no. of Pixels. However, the other width is different. So what's the relationship between width and pixels? Is this difference to be expected?
View 5 Replies View RelatedI'm trying to create a vb to get all columns on my sheet to have a fixed width.
If I run my sub all columns go back to the set width. But I want the width to reset when the width is changed.
I am in desperate need of a macros that sets the heights and widths of columns and rows on a list of provided spreadsheets.
On each of these sheets:
MySheets = Array("FY09 Installation Support", "FY09 Install", "FY09 Purchase", _
"FY09 CF Discretionary Grants", "FY09 CF LOI", "FY08 Purchase", _
"FY08 Installation Support", "FY08 CF Discretionary Grants", _
"FY07 Sup Install Support", "FY07 CF Install Non-LOI", "FY07 Sup Purchase", _
"FY05 CF Carryover Install", "FY04 Recovery Funds", "FY05 Recovery Funds", _
"FY08 Safety Carryover", "FY09 Safety", "FY09 Transport Canada")
I need to set the height of all the rows to 18.00. I need to set the width of all of the columns to 12.00, except for columns A, C, and T, which need to be at a width of 28.00.
Excel 2007
I want to CONCATENATE 3 columns
column 1 will have names
Columns 2 and 3 will have numbers
All will be of different lengths
Is there any way to set a fixed width when I use the CONCATENATE funstion so everything looks more uniform (left justified)
I wish to autofit all cells in a database to a maxwidth. ie:
Code:
With Range("A1:F1250")
.MaxWidth = 100px
.AutoFit
End With
I want to fill a listbox with n columns so there is no space other than the text in it.
I have tried this:
listbox1.columncount = 2
listbox1.columnwidth(len(activecell.text);len(activecell.offset(0,1).text))
Or:
mystring = len(activrcell.value) or refer to the excel column width
listbox1.columnwidth(mystring;mystring2)
but I get an error message.
Or max of list len or something. The default width is to big and specifying the length could make it to small.
How can i make blank columns be certain width using VBA... I need to do this because the data that is populated in a sheet will be different every time i need the blank columns to be certain width.
View 2 Replies View RelatedI set a column width to some integer like 10, and the next time I open the file it has changed to something like 9.89. Is there some configuration that prevents this from happening and leaves my setting alone?
View 4 Replies View RelatedHow do I get the actual worksheet height and width?
View 5 Replies View RelatedI'm trying to automatically resize the width of a combo box based on the width of the longest item in the combo box. The data in the rowsource of the combo box is dynamic.
View 5 Replies View RelatedI am looking for an formula to calculate the bin width for a histogram chart.
I am thinking of creating 50 bins for the chart. The range (max - min) of the data can be from £10 to £5,000,000.
A straighforward formula will be (max - min)/ 50. But I don't want decimal point in the bin numbers.
I am thinking of using Floor/Ceiling function, to round the bin-width to whole numbers, but 10/50, 100/50, 1000/50,..., 1000000/50 all need to round up/down to different scales! for example, I want 100/50 round to 5, 1000/50 round to 50 etc.....I was wondering is there a formula I can use to calculate the bin-width based on the criteria above or similar?
I'm creating a map like image with Excel, and I've set the column width and row height to certain dimensions. Now I'm entering in some text into them, and I noticed that when I added in 2 digit numbers, the column width expanded a little bit. I want to prevent this from happening, and still be able to enter in the 2 digit text (since it WILL fit, and it's expanding to keep that extra bit of space).
Is there any way to lock the dimensions?
the Ruler across the top that allows you to adjust the column widths (A B C D etc). Is it possible to insert another Ruler, further down the same page, to allow you to adjust the column width differently. if so how. On Excel 2007
View 2 Replies View RelatedI just want to know how to Autofit Column width of Listbox.
View 12 Replies View RelatedLets say i type for now...
A1 = USA
B1 = Philippines
and then later
A1 = dog
B1 = cat
Is there a way that the width would automatically adjust even as I change the values of the given cells; meaning, if a word is long, the width will automatically adjust "longer", if a word is short, then it will automatically adjust "shorter".
I know how the "AutoFit Column Width" works but I don't want to press that every time my values change (words becoming shorter or longer).
I have a worksheet that I receive as an Excel File in this format:
Account # (10 digits), Blank, Amount (Various), Date, Number(6), Location(blank), Tran Code (2) and Description (5)
i want o make some command buttons on a sheet with the width 50 and when you move the mouse over to any one the width of that one should increase to 300. when you move he mouse over to the other one the size of the previous one should return to 50 and the new one (now under the mouse) should be 300.
i have written the code for it how ever it tends to increase the width twice i.e. it will increase the size of the command button, then reduce it to 50 and increase it again. this action makes it look like it flickering
Code below
Code:
Option Explicit
Dim sShapes As Shape
Dim ActShapes As Shape
Dim wsStart As Worksheet, WsNew As Worksheet
Dim wd
Dim mybutton
Dim ShapeChk As Boolean
[Code]....
How would my macro below be edited to keep the column sizes the same as they are in the original sheet?
Sub NewUploadFile()
Workbooks.Add
ThisWorkbook.Worksheets(3).Range("A2:K300").Copy
Range("A3").PasteSpecial Paste:=xlPasteValues
Range("A3").PasteSpecial Paste:=xlPasteFormats
Columns.AutoFit
End Sub
I have this data below in an excel worksheet. I'm using the ws.Cells(x,x).Value command to read values from the cells an print them out to a .prn fixed width file. However when it writes it to the .prn file my numeric fields don't have are not 0.00 but 0. And also the numeric fields are left justified I would like them right justified in the .prn file.
Excel Spreadsheet values
1.135.102/29/120.000.001.135.202/29/120.000.00
My output to .prn file looks like below:
1.135.1 02/29/12 0 0
1.135.1 02/29/12 0 0
I would like my output to .prn file to look like the following:
1.135.1 02/29/12 0.00 0.00
1.135.1 02/29/12 0.00 0.00
1. Is there a faster way to adjust the size of the columns? I had to use my mouse to stretch the column out. This can be quiet time consuming if there are 8 columns needing to adjust to the same size. ie Col A, B,I, J needs to be the same size.
2. Can Excel determine the best size for the column? Say I need a column with data saying "yes" and "no" and a column for the letter "X" only or do I have to stretch the width of the column myself?
I want to know that can we adjust column or row width with keyboard.
View 1 Replies View RelatedI need to paste a picture from the Clipboard to my Worksheet. I select the origin and paste it with the macro.
I need to adjust that picture to fit in a defined space from left corner of Range($J$10) to the right corner of
Range($BJ$35)
Actually, i'm using this procedure
ActiveSheet.Unprotect
RANGE("graphique_PL").Select
ActiveSheet.Paste
Selection.ShapeRange.LockAspectRatio = msoFalse
Selection.ShapeRange.Height = 358.25
Selection.ShapeRange.Width = 725.
The problem with it is, the Height and Width is arbitrary to the size of the cells at the moment. I would like to had a procedure to calculate does value. They represent the distance between the defined cells location for the image. Actually, if cells width or height change, the picture is misplaced.
Hello All:
I have the following type information in thousands of cells. I need too isolate the Width and Length from these cells. The width and the length are the two numbers on each side of the "X".
RAPITONE C2 10 X 10 100
RAPITONE M2 10 X 10 250
RAPITONE M2 10 X 10 250
RAPITONE M2 10 X 10 250
RAPITONE M2 10 X 10 250
RAPITONE M2 10 X 10 250
RAPITONE M2 10 X 10 250
RAPITONE M2 76 EI 42 X 100 ROLL
Hi there, is it possible to calculate the Arc width by only having the Arc Length and Rise?
Rise is the height of arc
Arc length = 1525
rise = 230
width = ?
I have an Excel file where there are multiple people's information on one sheet, and I have to split them out into multiple sheets. So I have written a loop to successfully do that.
However, I need all the sheets to have the same column widths as the original sheet. So after I insert a new sheet and cut and paste the appropriate data, I call another Sub Procedure from my main Procedure to do this. That Sub Procedure looks like this:
Sub MySetColumnWidth()
' Copy the column width for the first 30 columns
Dim i As Integer
For i = 1 To 30
ColumnS(i).ColumnWidth = Sheets("Sheet1").ColumnS(i).Width
Next i
End Sub
However, I am not getting the results I expect. The column widths change, but are not the right sizes, and I have no idea why.
One odd thing I have notice, is that is mind code, whenever I type in:
Columns(i)
VBA automatically changes it to
ColumnS(i)
I have no idea why. I have no code or variables named "ColumnS". I am not sure if this is somehow playing into my problems...
BTW, I am using Excel 2007.
Is it possible to change the Left and Width parameters of a group of TextBoxes in a For/Next loop, when the only common factor is the amount of change? The TextBoxes ar of different widths and locations. The common factor is a small TextBox the left of each TextBox which is what I am hiding under certain conditions. When hidden I need to move the TextBoxes over to where the hidden TextBox was and then enlarge the TextBox by the widt of the heddin TextBox (When the condition changes, I will resore the orginal positions and sizes).
vba did not like this bit of code in a For/Next loop:
Me.Controls("TB" & i).Left.Value = Me.Controls("TB" & i).Left.Value - 24
Me.Controls("TB" & i).Width.Value = Me.Controls("TB" & i).Width.Value + 24
I have a range of cells which I wish to print to a .txt document. However, I would like these cells to stay aligned, one on top of the other. I am currently doing that by finding the cell with the widest piece of data for each column, and storing the width that each column needs to be to an array of integers. Then, when printing out the range, I simply add spaces to each piece of data its width is the same as the max column width. I am finding the max column width using the following loop:
'find the width for each column and store in col_width()
For cur_col = 1 To total_cols
'skip the tag switches column
If cur_col <> 3 Then
max_data_width = 0
For cur_row = 1 To total_rows
cell_data_width = Len(Find_String_Diagnostics(diagnostic_range.Cells(cur_row, cur_col)))
If cell_data_width > max_data_width Then.................