I have the following cells:
A1: the percentage difference between cost1(D1) and cost2(C1)
B1: total product cost (C1+D1)
I need a formula that no matter if the %diff increases or decreases this would reflect in C1 and D1 (so basically C1+D1 would always add to B1 but with the split of % in A1)
I'm using Excel 2000 and I have a spreadsheet with 4 columns (A-D) and many (500+) rows.
Part 1:
#########################################
Colums A & B both contain identical data - a first name and a last name in the format "John Doe".
I want the second word ("Doe") removed from all cells in Column A so that only the first name remains, and I want the first word ("John") to be removed from every cell in Column B so that only the last name remains.
So, where A1 & B1 both started with the data "John Doe" now A1 contains only "John" and B1 contains only "Doe".
#########################################
Part 2:
####################################################
Column C contains addresses in the format:
"#5 - 123 Fake Street, Some City, CA 90210"
There is ALWAYS a comma and a space after the street address, then the name of the city or town followed by more data which may include one or more commas.
I would like everything BEFORE the first comma to remain in column C, and everything AFTER the first comma & space to be moved into Column D of the same row. The first comma and space are not needed again.
So, where C1 started with "#5 - 123 Fake Street, Some City, CA 90210", it now only contains "#5 - 123 Fake Street" and D1 now contains "Some City, CA 90210".
####################################################
How do I split numbers!
I have two problems/challenges!
Part I...
I got the answer 1987, and now I want Excel to take the numbers out and display...
1 in one box then i set + in the next, then 9 in the 3ed. box, next box +, then 8, then +, then 7 in the last so that i can have Excel make a SUM of it all to 25.
How do I split 1987 and put the numbers in different boxes?
Part II...
I want to make A=1 B=2... all the way up to 9, then start over again with J=1 K=2... up to 9 again and then over again.
So that if I write my name it comes out as a value of 14 (Odd = O=6 D=4 D=4 =14)
(AJSØ=1 BKTÅ=2 CLU=3 DMV=4 ENW=5 FOX=6 GPY=7 HQZ=8 IRÆ=9, It's the Norwegian alphabet, that's why there are some extra letters)
So how do I set up my Excel so that is ANY name is typed in I can get it out into a number from the values assign?
I have a workbook that I've built for a project. I've attached a sample workbook. What I'm trying to do, for the entire sheet or workbook if possible, is turn any Cell with a percentage of 30% to 49% yellow and any cell with a percentage of 50% or more Red. I would also like to move the ID's of the variable cells, for example Id number 9922, to the cells beside the description of the rows, Affected would be an example, if the information contained in the same row as the ID meets with a set of variables.
For example I only want the ID's moved if they correspond with IDsub 1-25. One more thing, the people who will be using this spreadsheet will be copying data from a website when it is imported it does not insert the values as numbers. I would like to format the cells, in example workbook they would be any of the cells labeled ID IDsub Variable or Number, so that anything put in that cell will automatically be converted to a number.
I should also probably add that the formatting will be done on approximately 80 rows a sheet with 47 sheets.
calculating the percentage of a percentage and writing the formula for excel.
There are 295 people in a room, of the 295, 75 or 25% are mothers. (I know how to calculate 25% - 75/295 = 25.42) of the 75 mothers 35 have 3 children, 32 have 2 children and 10 have 1 child.
35 is what percent of 25%
32 is what percent of 25%
10 is what percent of 25%
Here's my problem. I have a cell where there are many data strings seperated by ",". Each data string has a seperate value of its own like for e.g:
A2: aa,ab,ac
String Value
aa 1
ab 1
ac 3
What I want it accomplish is that, split the A2 cell into the different data string entities seperated by ",", then get the corresponding value of each of the data string entity, and to take the average of all the values of the different data string entities.
How can I toggle between percentage and actual value to display on a pie chart?
View 1 Replies View RelatedI have a whole number (207) in B5. This should be seen as a percentage (207%).
I want to add this percentage to the value in M15, which is not a percent (2705.8).
I would like to display this sum in M17.
The number that is displaying now, after simply putting 207% (I don't want the % symbol in there) in B5, and the formula =sum(M17,B5) in M17 is 270787%.
This is obviously not correct.
Why is Excel not rounding up a percentage of 93.5 to 94?
View 6 Replies View RelatedI have a simple issue i cannot figure out how to write a formula for.
In A2 i have the number of operations.
In A4 i have the percentage of CPU usage it requires to complete those operations.
I need an output somewhere that will tell me how may operations I can get per 0.1% of CPU usage.
The cell I am referencing value is 100,000
I need to take two percentages off of that number. First 50%, then 37% and have the value in a SINGLE cell.
Because 100,000/1.87 is not the same thing....of course.
Is there a formula that I may use to keep track of the YTD percentage of attendance of volunteer workers over the course of a year? I have approx 200 workers meeting once a week. Their names are listed in column "A" from A-4 to A-204. Starting in column "E" is the date of the weekday for attendance.
For Example: E-1 is dated Jan. 7, 2008. F-1 is dated Jan. 14, 08 etc. I place a one (1) in the corresponding cell to show that they attended. The formula I need would start in cell D-4 and be dragged down to D-204.
There also must be a way to factor in the weeks which we are to meet that must be cancelled due to weather etc. The worker should not be penalized due to our cancellation.
I was wondering what the formulas was for adding 20 percent to a price of lets say 10.00. What would I use for this?
View 2 Replies View RelatedI've seen a few finance excel sheets lately (don't have an example right now... ) that have a total number for something and then in parentheses next to it a percentage of the total is automatically calculated. So I have 5 pens and that's 10% of what I have in my pencil cup --> 5 (10%) is how it is displayed.
View 3 Replies View RelatedI would like to know whether it's possible to evaluate the percentage of a text value ie 'Approved', after filters on other columns have been done.
AREA YR DECISION
HN 09 APPROVED
NYM 08 REFUSED
RC 09 APPROVED
HN 09
RC 08 REFUSED
? %
So if I filter by AREA and/or YR, I would like the % of how many were 'Approved' in that filtered range (ignoring any blank cells in the DECISION column).
So far I have a basic
=TEXT(COUNTIF(C2:C6,"*Approved*")/ROWS(C2:C6),"0% ""Approval Rate""")
but it doesn't work once I filter by AREA or YR, and doesn't ignore blanks.
I have attached a file with both a sample section of data on the first sheet and the outcome I would like on the second sheet... I would do it all manually but there are over 200,000 rows in the actual file.
The macro needs to calculate the percentage of sale for each reference number within each part number and move down to the next part number and do the same until it reaches the bottom.
I've been trying to set the scroll bar min/max/small change to a decimal (percentage value) within the properties, obviously this does not work.
Since users can enter a value in the link cell for the scroll bar, how can I modify the current min/max/small change via macros so the scroll bar will show a min on 1%, small change of 0.25% and max of 25%?
I m having several problems and we will start with this one first. OK, we run machines for an 8 hour shift and these machines are down or not running for a few hours out of the 8 hour shift. I want to be able to put a number in a cell called "Delay" lets say 4:00 hours to make it easy and in the next cell over called "%" I want it to give me the % that the machine wasnt running for the 8 hours. The answer is 50%.
View 9 Replies View Relatedi have for example column I, J & K. col I and J has both negative & positive values and K (I/J) works out the %
Col I Col J col K
135975 583333 23%
-27748 583333 -5%
-18186 583333 -3%
272550 583333 65%
But i need a formula or formatting that always shows the negative percentage as a zero.
I have a simple spread sheet where i need a formula to work out a percentage. eg total cases 35246 number of errors 3. what percentage is the 3 of the total cases and what is the formula required to reflect the answer.
View 3 Replies View RelatedI have an issue new client is asking for me to present my reports with a percent complete. We do survey work and all our date is in Ft. The way my file is set up right now i have H5-H100 as incomplete footage, Column I5-I100 has my completed footage and to keep it simple Row 13 A-k show total amount of footage. He wants to see everyday when i submit the % complete based of footage incomplete and footage completed.
Anyone able to help me out with a formula for this? I tried messing with it a little, wasn't really able to get it down and my Excel skills definitely aren't past beginner level.
=IF(AE6="","",LOOKUP(AE6,{0,0.8,0.9},{"Failed SLA","Borderline SLA","Passed SLA"}))
The above formulae I have works but this changes this to failed when a 0 is shown in the field.
This 0 is shown in the field this is due to the item having no data how can I cahnge the formulae so the cell stays blank
I have 31 cells in a row (one for each day of the month. we collect data in these cells by typing "y" or "N". based on these input, cell 32 calculates the percentages based on total of Y's. Cell 33 has goal percentage. So, if the goal percentage is 30, Is there a way when a "y" or "n" is entered in cell 25, if the data percentage is = or 5% above the goal to get text message saying "good" but if the data percentage is 5% or more below goal, get a "not good" message?
View 3 Replies View RelatedI have a sheet comprising of 4 columns, laid out like the below ;
A4 = Equipment
C4 = Cost
E4 = Revenue
G4 = Gross Profit
I require to enter a percentage into the gross profit column, and for this to interact with the cost column, then for the revenue column to return the total of the cost including the profit.
I have a table where a field is called "Expected conversions at [X%]".
X% is a monthly calculation.
So to populate the table row name I tried ="Expected Conversions At"&" "&C28 where C28 refers to a percentage calculated elsewhere in the sheet.
Cell C28 is formated to 1 decimal place. But when I refer to it in this manner it displays to many decimal places.
The result:
Expected Conversions At X.XXXXXXXXXXX
It should say:
Expected Conversions At X.X%
How do I do this so as the % is dynamic and auto updates each month?
how to construct a formula that would give the amount of deposit needed initially that would equal, after an immediate percentage reduction, a certain amount.
For example, if the initial deposit was immediately decreased by 2.9 percent and 30 cents (as in a PayPal transaction), what would that initial deposit have to be to equal exactly 50 dollars after being reduced?
I have two rows of data representing marks out of different amounts.
E.g.
A1=23, A2=14, A3=50 etc.
B1=12, B2=10, B3=32 etc.
So, the first mark is 12 out of 23, the second is 10 out of 14 and so on. I have a large number of these for at least 250 people. Is there a simple formula that will immediately work out the average percentage for all of the marks above? If so, will it still work if some marks are missing?
Store A sells something for 100
Store B sells the same item for 125
Store B is 25% higher than A
how would a formula be written to show that?
Store B / Store A = 1.25 How do I get it to 25%
I have a parts list that works fine, and it works out a margin % of the cost and retail prices
the formual is
=IF(ISERROR(O18/N18),"",O18/N18)
now i would like this to show 0% if cell F17:F517 shows either "surcharge" or "consumables"
Its a bit weird i know but thats how i need it to work
Dont know if this formula helps in anyway
=SUMPRODUCT(--ISNUMBER(SEARCH(" Surcharge "," "&F17:F517&" ")),G17:G517)
I'm creating a spreadsheet were I need to take away time from each other to get a percentage for example
10:00:00 (A1)
take away 01:00:00 (B2)
Would give a percentage of 90% overall. But if I use the formula A1-B2 I get the answer 37.50%
