Populate Worksheet In Selected Order With Command Buttons
Jul 7, 2014
I'm trying to get a sheet filled in the order of the command buttons selected. It works like:
User clicks command button "A" in Sheet 1.
Macro runs that selects correct info in Sheet 2.
Info gets pasted in Sheet 3.
Repeat and Sheet 3 columns fill to the right with each command button clicked.
My issue is that I'm not sure what command to add in the macro to make it paste in the next available empty column. Right now all I can get it to do is paste over the info already there.
View 5 Replies
ADVERTISEMENT
Apr 28, 2013
I have 3 text boxes. and a numpad of 9 command buttons.
I wish to click on one text box and then click each of the "numpad" command buttons to populate the actve textbox with the number buttons that i click. What VBA code would i use to do this?
I think i can code something like this quite easily, the bit i am struggling with is how to make it so that only the active textbox text is amended.
View 1 Replies
View Related
Mar 25, 2012
I have some command buttons on a worksheet that I would like to disable, preferably make not visible, until a specific person logs in. I already have code to display worksheets, or hide them, depending on who is logged in. I would like to just add this code to the end of the login procedure, to make these buttons only visible when that person is logged in.
View 3 Replies
View Related
Jan 18, 2010
I am at it again and maybe I am asking to do something that is not possible. I am trying to build a program that will allow the user some flexibilty down the road if I am no longer here to support my code. I have a workbook that contains several sheets. The sheets are labled by equipment name. The Sheets themselves contain specific data with regards to the equipment. What I want to do is as follows. Populate a user form with command buttons based off of the worksheet names. The reason for this would be if 2 years from now we add a new piece of equipment all the user will have to do is add a sheet in the workbook and the user form would reflect the new sheet with a new button. Like wise if I delete a sheet in the workbook the user form would refelect that change as well.
View 14 Replies
View Related
Feb 22, 2008
On a worksheet, I have several commandbuttons. For many of the buttons the name in the "name box" is different than the name in the "(name)" field under Properties.
Researching this, I found this on msdn2.microsoft.com:
An ActiveX control on a sheet has two names: the name of the shape that contains the control, which you can see in the Name box when you view the sheet, and the code name for the control, which you can see in the cell to the right of (Name) in the Properties window. When you first add a control to a sheet, the shape name and code name match. However, if you change either the shape name or code name, the other isn't automatically changed to match.
So, in my case, one button has:
In the name box: "CommandButton5"
In the (name) properties field: "RunProcess"
The real problem arises when I'm using code to loop through the objects on the worksheet, and build an array of the object names. I'm trying to match the name of the buttons to their click events. In the code, "btn.name" returns the name found in the "name box". The one that I want is the name in the "(name)" field under properties because this is the one that matches the click event.
How can I determine, in code, what is entered in the "(name)" field for an object?
View 5 Replies
View Related
Feb 6, 2013
I have a workbook with a series of worksheets with stock lists and pricing that I would like a user to be able to select items on (say, with a checkbox) that would then automatically populate a separate master Order Form sheet. The Order Form sheet is currently blank, with headers, and I would like only those items selected on the various stock sheets to be displayed on the Order Form.
View 4 Replies
View Related
Nov 16, 2013
How can I adapt the following code to only show Columns; A, B, E, F and J from Sheet(3) into a Listbox called lbx_LiveAllocations?
As it stands, this code is only adding Column A. My only alternative has been to add all columns on the worksheet to the listbox, however there's a lot of unneeded information between.
Code:
Dim LR As Long
Dim ctrl As Object
Dim i As Long
Dim dic As Object
Dim arr As Variant
Set dic = CreateObject("Scripting.Dictionary")
[Code] ........
Erase arr
View 2 Replies
View Related
Mar 14, 2007
Is it possible to change the color of buttons or command buttons? There does not seem to be any place that allows this under properties for buttons, although there does for command bars. However, I've tried recording a macro as I change the color, but nothing get's recorded so I'm not sure what the syntax would be.
I have a spreadsheet with several buttons and I'd like them to change colors as they are pressed so it's possible to see what you've already done. And then, as soon as any other cell on the sheet is changed, the buttons reset color.
View 9 Replies
View Related
Apr 9, 2009
I have a range of cells (A1:D5) identified within a worksheet (worksheetA) as part of a user input form.
When a certain condition exists, a routine is executed that copies a range of cells (C1:F5) from another worksheet (worksheetB) to this defined range. The copied area consists of two command buttons. They get copied and pasted no problem.
When I want to reset (blank it out of its contents) my range in worksheetA from I copy another range over of just a range of blank shaded cells. However, doing this does not eliminate the command buttons left in the range on previous pasting.
How do I delete these command buttons left from previous pasting activities when I wish to reset my range?
View 9 Replies
View Related
Nov 22, 2008
I have a group of 3 Option Buttons that are grouped by a Group Box. I added another Option Button and placed it in the third position, moving the button that was originally third to the bottom. When I select the fourth button (that was originally the third of three) it still returns a 3 in the linked cell, and when the new button (placed in the third position) is selected, the linked cell returns a 4. How do I change the order that the linked cell sees? In the attached spreadsheet, the Group Box in question is the Pricing Method on the Tow worksheet.
RateCalcApp.xlsm
View 3 Replies
View Related
Jan 17, 2014
I have been having an internal debate of how my worksheets shoud be configured.
My workbook could potentially contain 300+ worksheets, 10 control buttons and around 20 macros.
Each worksheet contains data in a range ~ A1:AC40 with many blank cells.
Do you think a workbook with this many worksheets would be unmanageable given the Comp Spec of the user PC below?
Most of the cells are simply short text data.
System info
Processor: 2.3Ghz Dual Processor
RAM: 2GB
32bit
View 7 Replies
View Related
Feb 3, 2009
i try run macro with commandbutton, but it doesnt work. I insert button from "control toolbox" then i create a macro. Then i wrote this macro to "Private Sub" but it still doesnt work.
When i click on button, it only open editing macro, or select the button.
View 6 Replies
View Related
Aug 28, 2009
I made a userform to calculate the net weight of a package by taking the gross weight and deducting the amount of boxes included in the package. The most boxes possible is 25, so I used 25 command buttons numbered 1 to 25, so users only have to press the desired amount of boxes for the calculation to begin.
But that also means I've got 25 subs containing the same formula, and that's a bit much. I'm pretty sure this could be done more efficiently,
View 3 Replies
View Related
Sep 9, 2009
I have a multiple of command buttons that I want to make visible. I have the following code which I am trying to get to work. Maybe I am barking up the wrong tree.
View 2 Replies
View Related
Jan 4, 2008
I can't write macros, so have to create them by actually recording the process. I did that just now and then copied it into the Command button. When I run it from Tools>Macros, it works, but when I run it using the Command button it fails.
I'm trying to copy and paste values current MTD figures (P18:P39) to previous MTD area (W18:W39), but the command button fails at this selection. Cells 28-35 are blank, but I don't think this makes any difference, as I've tried the command button with those cells zeroed out.
This is what I recorded initially; this works from Tools>Macros
Sub Macro1()
'
' Macro1 Macro
' Macro recorded 04/01/2008 by Lucertola
'
'
Sheets("Reconciliation").Select
Range("P18:P39").Select
Selection.Copy
Range("W18").Select.....................
View 9 Replies
View Related
Sep 10, 2008
I have a workbook with some command buttons that I created a while back. The buttons used to work fine. But after installing a new computer, the spreadsheet no longer works. I can step through the code fine, but when I try to click on the button, nothing happens.
View 9 Replies
View Related
Aug 17, 2006
Is it possible to create a number of command buttons, depending on the number of lines on a worksheet, and then have the code attached to the command buttons execute based on the position of the buttons on the sheet. For example, if I have a button positioned over, say A3, can the code execute based on the content of another cell in the same row. I imagine that the button would have to be linked to the cell, but I cannot see how that is achieved.
View 8 Replies
View Related
May 25, 2007
i am trying to access buttons like ' Format - Column - Hide'
View 5 Replies
View Related
Aug 23, 2007
I was creating command buttons and had trouble using the linked cell. I found an example on the forum here but the command buttons seem to have many different behaviors. On the attachment, "Button 1" and "Button 2" are the ones I created in Excel 2003. "Button A" and "Button B" are from an example I found on the forum.
1 and 2 can only be edited on design mode, and have the formula "=EMBED("Forms.OptionButton.1","")" by default (which yields an error when exiting the formula field). A and B can be edited at any time, and have an extra tab ("Control") on the Control Format dialog. This seems to allow the linked cell to be set and function pretty handily. Are A and B from a different version of Excel? Auto Merged Post;Here's the attachment:
View 3 Replies
View Related
Jul 8, 2013
I have 3 cpmmandbuttons in a spreadhseet named "Controls" . viz
Trim and Edit Base DataCreateReportArchive
They are always run in the same order.
My Aim is to disable and gray out the Archive button once its assigned macro is run(by clicking it) so that it activates only next time that the workbook is opened.
View 9 Replies
View Related
Feb 15, 2010
In the attached workbook there is a UserForm with five (5) command buttons along the bottom of the UserForm. I'm familiar with making them the same size and aligning tops. What I'm struggling with is how to distribute them horizontally. That is, to get the same amount of "white space" between them.
View 9 Replies
View Related
Sep 21, 2008
I need to get the code for a "copy" command button and "select all" command button. I need both for a text box.
Scenario: I click on the "select all" command button, it selects whatever is in the text box and then the "copy" command button copies all of that. So then I would be able to paste that in another program.
View 6 Replies
View Related
Feb 26, 2009
Does anyway to use a scroll bar to priortize a selected range?
I have included a simple example that I would like to rearrange with a scroll bar.
For example, I would want be able to select one row in the range and then place it either above the current position or any where in that range.
View 13 Replies
View Related
Jan 13, 2010
I have I command buttons on the sheet and when I delete a row, the postiion of the buttons is changing. Can I make it somehow so they never move when I add or delete rows?
View 2 Replies
View Related
Feb 15, 2010
I've fought with this issue off and on for some time now and decided it was time to come to you for help. In the attached workbook there is a UserForm with five (5) command buttons along the bottom of the UserForm. I'm familiar with making them the same size and aligning tops. What I'm struggling with is how to distribute them horizontally. That is, to get the same amount of "white space" between them.
View 8 Replies
View Related
Aug 5, 2009
HOW TO SET FLOATING COMMAND BUTTONS in sheet which fixed at top or bottom of the screen not fixed at cells
means while scrolling a screen it should look like fix at bottom of the screen
View 6 Replies
View Related
Feb 25, 2014
I have multiple Command Buttons on a spreadsheet that all require the same password when used. The password s contained in the code. Is there a way to have the password in hidden cell so if the password needs to be changed it can be change onetime and it will change all passwords. Below is the code I am using for the password.
Const strPass As String = "123456"
Dim strPassCheck As String
Dim lPassAttempts As Long, lCount As Long
Do Until lPassAttempts = 3
lPassAttempts = 1 + lPassAttempts
[Code]....
View 3 Replies
View Related
Apr 25, 2007
Is it possible to format the colour of a command button based on the value of a cell?
View 9 Replies
View Related
Nov 5, 2009
Why code will not hide command buttons or worksheets based on a given password. I have attached the code so.
Private Sub Workbook_Open()
Dim strUser As String, strPassword As String
strUser = InputBox("Enter User Name")
strPassword = InputBox("Enter Password")
Select Case strUser
Case "O"
If strUserPassord = "O4" Then
ActiveWorkbook.Sheets("Main").Select
O.Enabled = True
GOODBYE.Enabled = True
S.Enabled = False
R.Enabled = False
A1.Enabled = False
A3.Enabled = False
A4.Enabled = False
Sheets("Set4").Visible = True
Sheets("Set5").Visible = False
Sheets("Set61").Visible = False
Sheets("Set63").Visible = False................
View 9 Replies
View Related
Oct 29, 2006
I have a workbook which employs 4 different userforms. Navigating thru the workbook, the user ends up at a sheet with 5 macro buttons, allowing them to choose from several different functions. I added these to the worksheet using the "forms" toolbar.
My question is this: Is there anyway to change the color of these buttons, as I can with the userform buttons? Under "format control" I can change size, font, even color of font, but I can't change the background color of the button itself. Is it possible to identify those particular buttons thru VBA and adjust it's format?
View 7 Replies
View Related
