I have 3 text boxes. and a numpad of 9 command buttons.
I wish to click on one text box and then click each of the "numpad" command buttons to populate the actve textbox with the number buttons that i click. What VBA code would i use to do this?
I think i can code something like this quite easily, the bit i am struggling with is how to make it so that only the active textbox text is amended.
I'm trying to get a sheet filled in the order of the command buttons selected. It works like:
User clicks command button "A" in Sheet 1.
Macro runs that selects correct info in Sheet 2.
Info gets pasted in Sheet 3.
Repeat and Sheet 3 columns fill to the right with each command button clicked.
My issue is that I'm not sure what command to add in the macro to make it paste in the next available empty column. Right now all I can get it to do is paste over the info already there.
Is it possible to change the color of buttons or command buttons? There does not seem to be any place that allows this under properties for buttons, although there does for command bars. However, I've tried recording a macro as I change the color, but nothing get's recorded so I'm not sure what the syntax would be.
I have a spreadsheet with several buttons and I'd like them to change colors as they are pressed so it's possible to see what you've already done. And then, as soon as any other cell on the sheet is changed, the buttons reset color.
i create new sheet on button click event using this code
Worksheets.Add before:=Sheets(Sheets.Count)
ActiveSheet.Range("A1").Value = TextBox1.Value
but now i want that when this new sheet will open there will be some labels, textboxes and buttons n etc will be appear on that sheet so how can i display these elements on new sheet dynamically ??
I am trying to disable a command button if 4 textboxes are empty. I can make it work if one of the textboxes are empty but not all of them. this is what i have so far.
Private Sub TXT3_Change()
If TXT3.Value = "" Or TXT4.Value = "" Or TXT5 = "" Or TXT6 = "" Then
CommandButton13.Enabled = False
End If
If TXT3.Value "" Then
CommandButton13.Enabled = True
End If
End Sub
I need the code to calculate the average of 4 textboxes and then put them into the cells, and every time new calculation is given, it is put into the new cell :
i have textbox (1,2,3,4)
my commandbutton needs to the calculation average of the value that is put into those textboxes.
I need to link the textboxes of a form to the appropriate cells associated to the selection made by a combobox. And in the process I need to be able to Edit one of those Textboxes on the fly while the rest will be locked to the user.
Not sure if the editing of the Notes section can be real time of if it must be updated through a button.
I am trying to do is when a user puts in an RMA number into a textbox (txtReviseRMA) on the userform, it will search column B on the spreadsheet to find the matching RMA number. Then I want it to look in column G for the Serial number and populate another textbox (txtSerial1) on the userform with that number.
My problem is that there can be a little as 1 serial number to an RMA or as many as 14, and each serial number has to go into a different textbox (they are named txtSerial1 all the way to txtSerial14).
If there are multiple serial numbers being sent in on one RMA, they are on different lines.
For example:
Column B (RMAs) Column G (Serials)
(B1) R66245 (G1) AA-10-1000
(B2) R66245 (G2) BB-20-2000
(B3) R66300 (G3) CC-30-3000
(B4) R66305 (G4) DD-40-4000
(B5) R66305 (G5) AA-10-1000
(B6) R66305 (G6) FF-60-6000
(B7) R66375 (G7) GG-70-7000..................
I would like to make a userform where additional textboxes (and labels) can be added to the form by clicking a command button. Is this possible to do?
For example, a userform which has:
Contractor 1: (TextBox)
and underneath this have a command button which when clicked will add another text box e.g.
Contractor 2: (TextBox)
I'm new to vba so haven't got a clue how to go about making this userform or even if it is possible.
I have a range of cells (A1:D5) identified within a worksheet (worksheetA) as part of a user input form.
When a certain condition exists, a routine is executed that copies a range of cells (C1:F5) from another worksheet (worksheetB) to this defined range. The copied area consists of two command buttons. They get copied and pasted no problem.
When I want to reset (blank it out of its contents) my range in worksheetA from I copy another range over of just a range of blank shaded cells. However, doing this does not eliminate the command buttons left in the range on previous pasting.
How do I delete these command buttons left from previous pasting activities when I wish to reset my range?
I have been having an internal debate of how my worksheets shoud be configured.
My workbook could potentially contain 300+ worksheets, 10 control buttons and around 20 macros.
Each worksheet contains data in a range ~ A1:AC40 with many blank cells.
Do you think a workbook with this many worksheets would be unmanageable given the Comp Spec of the user PC below?
Most of the cells are simply short text data.
System info
Processor: 2.3Ghz Dual Processor
RAM: 2GB
32bit
i try run macro with commandbutton, but it doesnt work. I insert button from "control toolbox" then i create a macro. Then i wrote this macro to "Private Sub" but it still doesnt work.
When i click on button, it only open editing macro, or select the button.
I made a userform to calculate the net weight of a package by taking the gross weight and deducting the amount of boxes included in the package. The most boxes possible is 25, so I used 25 command buttons numbered 1 to 25, so users only have to press the desired amount of boxes for the calculation to begin.
But that also means I've got 25 subs containing the same formula, and that's a bit much. I'm pretty sure this could be done more efficiently,
I have a multiple of command buttons that I want to make visible. I have the following code which I am trying to get to work. Maybe I am barking up the wrong tree.
View 2 Replies View RelatedI can't write macros, so have to create them by actually recording the process. I did that just now and then copied it into the Command button. When I run it from Tools>Macros, it works, but when I run it using the Command button it fails.
I'm trying to copy and paste values current MTD figures (P18:P39) to previous MTD area (W18:W39), but the command button fails at this selection. Cells 28-35 are blank, but I don't think this makes any difference, as I've tried the command button with those cells zeroed out.
This is what I recorded initially; this works from Tools>Macros
Sub Macro1()
'
' Macro1 Macro
' Macro recorded 04/01/2008 by Lucertola
'
'
Sheets("Reconciliation").Select
Range("P18:P39").Select
Selection.Copy
Range("W18").Select.....................
I have a workbook with some command buttons that I created a while back. The buttons used to work fine. But after installing a new computer, the spreadsheet no longer works. I can step through the code fine, but when I try to click on the button, nothing happens.
View 9 Replies View RelatedIs it possible to create a number of command buttons, depending on the number of lines on a worksheet, and then have the code attached to the command buttons execute based on the position of the buttons on the sheet. For example, if I have a button positioned over, say A3, can the code execute based on the content of another cell in the same row. I imagine that the button would have to be linked to the cell, but I cannot see how that is achieved.
View 8 Replies View Relatedi am trying to access buttons like ' Format - Column - Hide'
View 5 Replies View RelatedI was creating command buttons and had trouble using the linked cell. I found an example on the forum here but the command buttons seem to have many different behaviors. On the attachment, "Button 1" and "Button 2" are the ones I created in Excel 2003. "Button A" and "Button B" are from an example I found on the forum.
1 and 2 can only be edited on design mode, and have the formula "=EMBED("Forms.OptionButton.1","")" by default (which yields an error when exiting the formula field). A and B can be edited at any time, and have an extra tab ("Control") on the Control Format dialog. This seems to allow the linked cell to be set and function pretty handily. Are A and B from a different version of Excel? Auto Merged Post;Here's the attachment:
I have 3 cpmmandbuttons in a spreadhseet named "Controls" . viz
Trim and Edit Base DataCreateReportArchive
They are always run in the same order.
My Aim is to disable and gray out the Archive button once its assigned macro is run(by clicking it) so that it activates only next time that the workbook is opened.
In the attached workbook there is a UserForm with five (5) command buttons along the bottom of the UserForm. I'm familiar with making them the same size and aligning tops. What I'm struggling with is how to distribute them horizontally. That is, to get the same amount of "white space" between them.
View 9 Replies View RelatedI need to get the code for a "copy" command button and "select all" command button. I need both for a text box.
Scenario: I click on the "select all" command button, it selects whatever is in the text box and then the "copy" command button copies all of that. So then I would be able to paste that in another program.
Does anyway to use a scroll bar to priortize a selected range?
I have included a simple example that I would like to rearrange with a scroll bar.
For example, I would want be able to select one row in the range and then place it either above the current position or any where in that range.
I have I command buttons on the sheet and when I delete a row, the postiion of the buttons is changing. Can I make it somehow so they never move when I add or delete rows?
View 2 Replies View RelatedI've fought with this issue off and on for some time now and decided it was time to come to you for help. In the attached workbook there is a UserForm with five (5) command buttons along the bottom of the UserForm. I'm familiar with making them the same size and aligning tops. What I'm struggling with is how to distribute them horizontally. That is, to get the same amount of "white space" between them.
View 8 Replies View RelatedHOW TO SET FLOATING COMMAND BUTTONS in sheet which fixed at top or bottom of the screen not fixed at cells
means while scrolling a screen it should look like fix at bottom of the screen
I have multiple Command Buttons on a spreadsheet that all require the same password when used. The password s contained in the code. Is there a way to have the password in hidden cell so if the password needs to be changed it can be change onetime and it will change all passwords. Below is the code I am using for the password.
Const strPass As String = "123456"
Dim strPassCheck As String
Dim lPassAttempts As Long, lCount As Long
Do Until lPassAttempts = 3
lPassAttempts = 1 + lPassAttempts
[Code]....
Is it possible to format the colour of a command button based on the value of a cell?
View 9 Replies View RelatedWhy code will not hide command buttons or worksheets based on a given password. I have attached the code so.
Private Sub Workbook_Open()
Dim strUser As String, strPassword As String
strUser = InputBox("Enter User Name")
strPassword = InputBox("Enter Password")
Select Case strUser
Case "O"
If strUserPassord = "O4" Then
ActiveWorkbook.Sheets("Main").Select
O.Enabled = True
GOODBYE.Enabled = True
S.Enabled = False
R.Enabled = False
A1.Enabled = False
A3.Enabled = False
A4.Enabled = False
Sheets("Set4").Visible = True
Sheets("Set5").Visible = False
Sheets("Set61").Visible = False
Sheets("Set63").Visible = False................
I have a workbook which employs 4 different userforms. Navigating thru the workbook, the user ends up at a sheet with 5 macro buttons, allowing them to choose from several different functions. I added these to the worksheet using the "forms" toolbar.
My question is this: Is there anyway to change the color of these buttons, as I can with the userform buttons? Under "format control" I can change size, font, even color of font, but I can't change the background color of the button itself. Is it possible to identify those particular buttons thru VBA and adjust it's format?
