I got a list of counties in Texas, but the list is in mixed case and always has a " County" after each one. I got it converting to upper case, and have tried removing the " County" but no luck. Below is the code I have:
Code:
Sub TEXAS()
For a = 1 To 254
R = "D" & a
i = "a" & a
ActiveSheet.Range(R) = UCase(ActiveSheet.Range(i))
Next a
End Sub
Is there a way of selecting text and converting it all from lower to upper case?
View 3 Replies View RelatedIn cells A1:A45 i have all lower case names...how would i use a function to convert all to upper case
View 6 Replies View RelatedI have a string of names that run together without spaces or commas between each name.
"Danny TrejoJean Claude van DammeVincent SchiavelliGabrielle FitzpatrickDavid 'Shark' FralickPat Morita" for example.
Is there a way to add a comma and space between a lower case and upper case letter?
When I use a simple formula such as:
=upper(a1)
that will obviously change whatever is in a1 to Upper Case - but it will put it in the cell that holds the formula.
What I want to know is:
Is there any way I can format the cell to run the formula when the information has been pasted into the spreadsheet
if there's any way for vba to detect if each individual character in a string is in caps, and if so, convert to lower case, and if it's in lower case, convert to capitalized
The text will vary in length and content... so he wants to see how we can change:
"This Is Strange" to "tHIS iS sTRANGE"
"THIS IS STRANGE" to "this is strange"
"this is strange" to "THIS IS STRANGE"
In column J of my Excel 2003 worksheet named: Sheet1, is a list of mailing addresses. A copy of the spreadsheet is attached. I need a macro to please capitalise (Upper-case) the second character only of all the Post Office addresses.
Example:
Po Box 65, ORLANDO, NSW 2697
All of my Post Office addresses are prefixed: Po
I need the Post Office addresses to be prefixed: PO
So, the above mentioned example should look like this: PO Box 65, ORLANDO, NSW 2697
How can i use UPPER case formula in a list ?
i have a on sheet4 at A1, source of data is sheet2 from A3:A5000. some entries in lower case, i want in list (A1) all entries UPPER case.
I have this code (this is just a snippet)
For Each cel In Range("E6:AI15").Cells
If IsError(cel.Value) Then
Else
Select Case UCase(cel.Value)
Case "H"
cel.Font.ColorIndex = 0
cel.Interior.ColorIndex = 3
Case "S"
cel.Font.ColorIndex = 0
cel.Interior.ColorIndex = 10
but I want the cells to accept both upper and lower case values and format the cells accordingly ie. H or h, S or s
I have a usferform where I want the result from textbox1 displayed in the cell as all caps.
here is what I tried but not effective.
If UserForm7.CheckBox5 = True Then Range("A23") = UserForm7.UCase(TextBox1.Value) & " SPECIAL EVENT RENTAL"
I have a column containing 8000 records, some of them are in upper case & rest are in proper case, is there any way wherein i can filter all records which are in upper case without using macros, i mean is it possible to do it using ISNA function ?
View 2 Replies View RelatedOnly have upper case letters.
I am trying to get certain cells to only have upper case letters.
each cell in the code will have a single letter typed in.
I would rather have it as an event code (change while it is typed), but I have not grasped the whole thing yet.
This code does not give me any errors, but it is not changing the lower case letters into upper case letters either.
[Code] ......
=upper("venkat") returns VENKAT
=upper(a1) returns the text in A1 in upper case
similary lower
proper will turn the first letter into uppercase
is this what you want;.
Terry <terrybetts11138@hotmail.com> wrote in message
news:dbl0dk$poa$1@nwrdmz02.dmz.ncs.ea.ibs-infra.bt.com...
> Win XP Pro
> Office 2003
>
> Using "Excel" and wish to select any text in a worksheet to ALTER the case
> to either upper or lower.
> When using "Word" it is easy via the menu.
> Is there a menu driven option in Excel
of using a function for this purpose.
find the "add in" that converts the case text
from lower to upper in excel. i've already downloaded this before but can't
remember where from and it is much easier than creating a formula or a macro
i need to extract only the UPPER case words from a column and paste them in the adjacent column.
Is there any formula or vba routine for it.
Ex:
COL A contains the following:
FIRST
second
THIRD
FOURTH
fifth
sixth
SEVENTH
......and so on.
i need to extract only the Letters or words which are in total Uppercase and paste them in the next column ..i.e. COLUMN B..
I have cells that have 1 or 2 words in them. Is there a formula I can use that will make the 1st letter of each word Upper Case. The whole range started out all caps. I used =lower(a1) to make them all lower. Now I just need 1st letter of each word upper.
View 9 Replies View RelatedI am using the following code behind this sheet. In row 9 and column D if I put a lower case letter i want to convert it to uppercase automatically can you see what I am doing wrong.
Private Sub Worksheet_Change(ByVal Target As Range)
'Debug.Print Target.Text & " " & Target.Value & " " & Target.Value2
Dim vVal
'If Target.Cells.Count > 1 Then Exit Sub
If Intersect(Target, Range("C9:D28")) Is Nothing _
And Intersect(Target, Range("G9:H28")) Is Nothing _
And Intersect(Target, Range("K9:L28")) Is Nothing _
And Intersect(Target, Range("O9:P28")) Is Nothing _
And Intersect(Target, Range("S9:T28")) Is Nothing _
And Intersect(Target, Range("W9:X28")) Is Nothing _......
I have data in cell A1 as below:
36, TREE ROAD, 5TH FLOOR
I want it in proper format in cell A2 as below:
36, Tree Road, 5th Floor
I used formula =Proper(A1), it gave results as:
36, Tree Road, 5Th Floor
The only problem I face is after any number, the next character should in lowercase, i.e. 5th
I have a series of input boxes and in one particular input box ("TypeScore") if the lower case is entered I want to convert it to upper case. Here is a small snippet of the series of input boxes. I have tried just about every suggestion I can find on this forum, but can't get it to work.
View 9 Replies View RelatedI'm developing a spreadsheet that is generating relatively simple source code. As far as excel is concerned, based on columns of data in the first sheet, generate other sheets - conceptually straightforward, but the formulas are getting stupid long. For example, suppose I have 4 columns:
Needs A, Needs B, Needs C, and Needs D.
If there is a "Y" in any of these columns, I need to generate corresponding text that is concatenated together:
=if(a1=="Y") use "Field1[if1]"
=if(b1=="Y") use "Field2[if2]"
=if(c1=="Y") use "Field3[if3]"
=if(d1=="Y") use "Field4[if4]"
The result in some other column could be (samples):
Field1[if1]
Field1[if1].Field2[if2]
Field3[if3]
Field2[if2].Field4[if4]
a couple of notes:
- you can have field 2 without field 1, etc.
- if there is a trailing field, then I need a period separating the two.
Needing this separating period between some of the columns is driving me bat crap crazy. My approach to this point is to build work sheets that feed the main page, thus isolating the logic complexity. This seems to be the only way to segment the processing into something one can edit.
I would like a user to be able to enter text into a cell in any case and have it be displayed in all capital letters (or as a "Proper" capitalization). Seems strange that >FORMAT doesn't seem to have a "case" selection.
Past threads show VB code to do this, but I don't want the user to have to click a button to change case. Could the VB code run automatically after the user hits >enter, or tab, or an ->? Is there a way to >FORMAT a cell to do this change? I know the "Upper" & "Proper" functions but it would be very clumsy to have the user enter data in cell A1 just to be displayed in capitals in cell A2.
Example: When user types "lax" in cell A1, I would like "LAX" to be displayed in cell A1.
I'm trying to formulate:
If it's mixed case, copy it. If it's all lower case or ALL CAPS, then make it PROPER.
i.e., if 'bananas' is in A1 and B2 says =PROPER(A2), then B2 says Bananas, because PROPER capitalises the first letter of each word.
I would like to do
[Code] .....
Is it possible to change and entire sheet to Upper case using the 'Upper' function?
We are need to change all the text to caps but can only seem to apply the function to one cell at a time and then copy it down for the column. This is going to be a fairly labour intensive process as we have many columns.
How can I make this code fire for column 2 AND column 3?
View 2 Replies View RelatedI have been trying to get a certain selection of cells to display inputs as capitalized no matter if entered in lower case. I looked through this forum and found some, I did try some of the suggestions, and I am having no luck. I am wondering what I am doing wrong?
View 12 Replies View RelatedHow can i convert into upper case every word in a given cell. For instance:
I have the following in column A: books pen desk
i want it to be like this: Books Pen Desk
I have a workbook on which I want to change all the text from Lower to Upper case.
How can I do this without retyping .
I have created a text convertor which will convert any text into upper case or lowercase (not very complex but very handy!) Is there anyway way that when text is in uppercase and I convert it to lower case that it makes every character after a full stop in upper case
Example
DAVID WAS NOT WELL. HE WENT HOME
to
David was not well. He went home
I currently get
david was not well. he went home.
way to split a text line into seperate cells using upper case letter, or any letter for that matter, as delineator. A couple of sample lines would be as follows. It happens to be in upper case, but doesn't need to be, so any alphabetical letter would do, I think.....
View 9 Replies View RelatedI've got a column of data that I need to split into further columns, the only way of identifying the split from the data is if a lower case character appears next to an upper case character.
For example, a cell in column A could look like;
Computer ProductsDrivesDVDExternal
And I'd need to split that out to cover columns A B and C with
Computer Products / Drives / DVDExternal
I'd need to do that for all the cells in column A.