Speeding Up Multistep Loop
Aug 20, 2007
first, id like to thank the board for the help on setting up an array or ranges.
ive been able to get my code to work but its painfully slow...if anyone had any recommendations on speeding it up would appreciate it...i was playing around with using formulaarray instead of writing and reading the data on each loop but cant get it to work...and i'm not really even sure thats the right way to go.
i copied the entire code below...what i was doing was taking 8 time series and looping thru each one to calculate some basic statistics...i ran the function EDFlyRateFromPrice to calculate another series of data which i then run the standardize, max and min functions on.
View 9 Replies
ADVERTISEMENT
Jul 16, 2007
I've been working on the following code and need to find a way to speed it up.
The premise is that I have a list of columns (From C2 to potentially EH and beyond) and these columns will contain the values Y, N, end or nothing. I'm looking for the quickest way to zap along the columns and delete all that have an N and to stop when end or "" is reached.
There are 2 versions as I'm not sure which one is best ...
Range("B2").Select
LastColumn = Range("A1").End(xlToRight).Offset(, 1).Column
For k = 2 To LastColumn
ActiveCell.Offset(0, 1).Select ' right 1
If ActiveCell.Value = "Y" Then Next k
End If
If ActiveCell.Value = "N" Then
ActiveCell.EntireColumn.Delete 'If employee has no sickness then delete column
ActiveCell.Offset(0, -1).Select
End If
If ActiveCell.Value = "end" Then Exit For
If ActiveCell.Value = "" Then Exit For
Next k
or a longer version
StripSickness:
Range("B2").Select
ActiveCell.Offset(0, 1).Select ' right 1
PrintView = ActiveCell.Value 'Y/N whether employee has data
If PrintView = "Y" Then GoTo StripSickness
If PrintView = "N" Then GoTo NotNeeded
If PrintView = "End" Then GoTo Complete 'last column shows "end"
If PrintView = "" Then GoTo Complete
NotNeeded:
ActiveCell.EntireColumn.Delete
ActiveCell.Offset(0, -1).Select
GoTo StripSickness 'once employee is deleted, go back to stripsickness process
Complete:
Range("a1").Select
View 9 Replies
View Related
Mar 13, 2008
This may be a long shot, but I've been working on a macro today which runs a few Vlookups, does some copying and pasting and some re-aligning....basically nothing too complicated. The Vlookup is looking through approx 45,000 records and returning about 200 - 300 on average, this info returned is company name, address, contact info etc etc.
This macro is taking a ludicrously long time to run, I've checked through and removed any coding that I think is unnecessary without altering the final outcome of the macro.
It still takes ages. Has anyone got any ideas why this may be, or any tips of speeding it up?
I have a brand new computer, dual core processor, 2 gigs of ram etc so it shouldn't be performance of the machine slowing it down, and I ran it with the least applications open that I can (I'm at work so can't close everything, but none of the other applications are memory hogs or anything). I'm running on Office 2003 on Windows XP.
View 9 Replies
View Related
May 13, 2008
I am running a rather large simmulation where I have 12 for loops with each running between 0 and 100% with variable steps and the where the sum of the 12 variables has to sum to 100% and sometimes combinations of the sums of a few of the 12 have to sum up to specific values. That part works, now I am trying to get this to run faster.
Question:
Is there a different design that might be able to run this process more efficiently?
If not, is there a way to speed up the process by letting the computer know that all these variables are between 0 and 1 (or 100%) and that I only need 3 digits after the decimal if the value is in % form?
(the only problem with the rounding or cutting off the decimals at the end that I can think of is that it will only speed up the process a bit but will also make the summing upto 100% or any other value difficult)
View 9 Replies
View Related
Jul 17, 2007
I've been working on cleaning up some code that copies particular information from one sheet (as the original must remain unedited) and then edits out irrelivant information.
However I've noticed that my "before" code moves far faster than my "after" code, which is odd considering that I've cleaned out a lot of excess code and the end results are the same.
I attach an example of my old fast code and my new slow code - can anyone advise where I have gone wrong ? Run the fast code first and then the slow one - you'll see the difference!
View 9 Replies
View Related
Jun 28, 2007
I need help with speeding up my macro. I have been building this using alot of the recorder and the maco is just horribly sluggish. I don't know if it is possible, but it seems like it is. I need the macro to obviously work the same way. The way it has been recorded, the order of operation is important. But if any one knows how to do this better it would be a huge help. The slowest part is during the insertion of the formulas into col. J,K,&L takes like over 7min -- Macro does work perfect though.
View 9 Replies
View Related
Aug 23, 2007
This code is pretty slow if most rows have to be hidden. I'm certain there is a faster way to do this but I'm not seeing it.
What am I doing with
For each row from 12 to 236 I'm looking to see if there is data in any cell in columns A:F, H, & J. If not, I hide the row. I'm starting at row 236 and working up to 12 continuing to hide rows until I find data or I reach row 11. As soon as any row has data or row 11 is reached the the procedure ends leaving all remaining rows visible ...
View 9 Replies
View Related
Jun 23, 2008
This part of my macro can be improved as it runs through over 100 sheets and takes a while?
Sheets.Select
For Each sh In Worksheets
With sh.PageSetup
.Zoom = False
.LeftFooter = "&F" & Chr(10) & "&A"
.CenterFooter = "&P of &N"
.RightFooter = "&D"
.FitToPagesWide = 1
.FitToPagesTall = 1
.LeftMargin = Application.InchesToPoints(0.15748031496063)
.RightMargin = Application.InchesToPoints(0.15748031496063)
.TopMargin = Application.InchesToPoints(0.393700787401575)
.BottomMargin = Application.InchesToPoints(0.354330708661417)
.HeaderMargin = Application.InchesToPoints(0.511811023622047)
.FooterMargin = Application.InchesToPoints(0.196850393700787)
.TopMargin = 1
.BottomMargin = 1
.Orientation = xlPortrait
End With
Next sh
View 9 Replies
View Related
Aug 27, 2009
Ive found a few ways to speed up the macro in my workbook thats taking about 40 minutes to process usually.
One way - Press Escape and it goes about twice as fast! - Wy does it do this?
Another way - Inserting these lines into the code -
Application.Calculation = xlCalculationManual
Application.Calculation = xlCalculationAutomatic
View 9 Replies
View Related
Mar 4, 2014
I am putting together a workbook which calculates a rota for 5 days that shows overall headcounts every 15mins.
It currently has 12672 cells containing SUMIFS.
But this takes a very long time to calculate.
Is there a faster / more efficient way for me to approach this task?
Can I attach the workbook so you can see what I mean?
View 1 Replies
View Related
Jul 14, 2008
Delete rows where column A and B are duplicated.
However, this runs extremely slow. I had to stop it after about 10 min, as it only got to about row 1000 of 20,000.
Sub Delete_Dupes()
Dim rw1 As Long: rw1 = 1
Dim rwx As Long: rwx = rw1
Dim stepx As Integer
Dim co1 As Integer: co1 = 1
Dim co2 As Integer: co2 = 2
Dim bool1 As Boolean
Dim bool2 As Boolean
Dim bool As Boolean
Dim count As Integer
count = 0
Do Until Cells(rwx, co1) = ""
stepx = 1
If rwx > rw1 Then
On Error GoTo NewCrit
bool1 = IsError(Application.WorksheetFunction.Match(Cells(rwx, co1), Range(Cells(rw1, co1), Cells(rwx - 1, co1)), 0))
bool2 = IsError(Application.WorksheetFunction.Match(Cells(rwx, co2), Range(Cells(rw1, co2), Cells(rwx - 1, co2)), 0)).................
View 9 Replies
View Related
Jan 15, 2007
Did not want to hijack Jonny's thread about ways in which to update and streamline code to make it run faster. The update speed of my first attempt at a macro is woefully slow - 5 minutes for 2.5K records. I was wondering if some of you more knowledgeable folk could look at my code and make suggestions as to how it could be modified to run faster.
When I ctrl-break out of it I usually end up in a private sub that concatenates columns A & B in Column C (see below). When it resorts the database it must keep triggering this concatenate sub which (I think) is slowing things down.
Concatenate Private Sub:
Option Explicit
Private Sub CommandButton1_Click()
End Sub
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Cells.Count > 1 Or IsEmpty(Target) Then Exit Sub ......................
View 9 Replies
View Related
May 22, 2014
I want to filter 4 worksheets, but it takes a lot of time, something like 5 seconds, I need it to be at least twice faster.
I'm using this formula: [Code]......
View 2 Replies
View Related
Mar 14, 2013
1. I need to paste data that is copied from an internet window into sheet1 without selecting the cell so that I can continue working on a data in sheet5. The macro prevents me from editing sheet5 in an orderly fashion because when it goes to paste the data into sheet1 it selects the cell in sheet1 interupting what I am trying to manually do with the data in sheet5. How to paste data into a cell withou selecting the cell so that my program stops interupting what I am doing in a different sheet?
2. My macro is meant for real-time defect monitoring in a production facility. The macro opens an IE window that contains the defect occurences, copies the data, pastes it in sheet 1 then sheets2 and 3 analyze the data, closes the IE window, and then waits for a time period before repeating the process. This macro is so slow though that it is hard to work on this file while the macro is running. How to run the macro in the background and speed it up so that I can continue working on Sheet5 of the file while the macro repeats itself over and over again? Here is my code.
The variable website is determined by earlier parts of the code that direct the macro to a specific network website.
Sub Half_Hour_Data
1
'Open Internet Window and Navigate to Website
Set myIE = CreateObject("InternetExplorer.Application")
myIE.Navigate Website
myIE.Visible = True
Application.Wait Now + TimeSerial(0, 0, 10) needed to wait until the page loads
[code]....
Is there a way to speed up the macro by removing the timeserials and just telling it to continue when the task is complete. Then run the whole thing in the background so I can work on another sheet while this program runs?
View 1 Replies
View Related
Jul 7, 2009
i'm working on floyd algorithm macro for a project,
problem is, the spreadsheet matrix is huge, it's a 1043 x 1043 spreadsheet
And this is taking wayyy too long, i've been waiting for almost 2 days already..
here's the file :
http://ifile.it/6v2j39f
(You start the macro using "run" command in "input" sheet)
So is there any way to speed it up?
Or if anyone got a supercomputer, could you help me process this? :p
I'm thinking about changing the 10^5 value into infinite value, but i can't find a way to display infinite value..
And here's some reference for Floyd's algorithm,
http://ifile.it/12p5zle
I have tried to split the algorithm to make it process one iteration at a time, but i've been waiting like 2 hours with no result,
and that's for 1 iteration, can't imagine how long it takes for 1043 iterations
You can do this by deleting the.
View 14 Replies
View Related
Mar 31, 2008
With Sheets("regrade pharm_standalone")
For Each r In .Range("standaloneTerritory")
If r.Value = "X101" Then
r.EntireRow.Copy
Sheets("X101").Range("A1").End(xlDown).Offset(1).PasteSpecial xlPasteValues
End If
Next r
End With
-------------------
I need to repeat this loop for values from X101 to X151. In all cases, the sheet name is equal to the value I'm looking up (eg: value = X102 goes to sheet X102).
I have a named range called 'territories' that contains the list of X101 -> X152.
I'm hoping to make the code perform the loop for each of the territories without my having to copy & paste and change the 'X101' 51 times as this would seem a rather silly thing to do!
View 9 Replies
View Related
May 14, 2014
Macro which loops through a number of files and calls the same macro in each of them. Unfortunately when I add "Application.Run..." to the code, it no longer loops through the process and instead stops after updating the first file in the loop. If I remove the "Application.Run..." code and add any other code, the loop works fine and it continues through the process repeating all the steps for each file found.
Why it stops after one file when using "Application.Run..." to call the macros?
NB I have a list of path and file names starting in row 8 of columns A and C. Each file in the list has a macro called UpdateS1 and promoupdate1.
Sub C_Run_Loop_Macro()
Dim lastRow As Long
Dim i As Long
[Code]....
View 4 Replies
View Related
Sep 11, 2013
I have working code that returns a row number within a for loop based on parameters I set.
Each time the for loop runs I would like to store this row number, then after the loop has finished, delete all stored rows.
Code:
for rowNum = 1 to x (some variable end row number which I already have worked out using End(xlUp).Row)
if x = y then
*storedRow = rowNum
end if
next rowNum
*
Lines with a * are the bits I can't work out. I've been trying to understand arrays by reading posts on what other people have done, but I can't fit (or fully understand) the reDims, or reDim preserves into my code. I've seen what appear to be quite complex ways involving uBounds and LBounds, but unfortunately I can't see how to use them.
All I want is to simply keep adding a row numbers to a variable, (i.e. row 2, 5, 20, 33, 120, etc) and then delete those specific rows.
View 4 Replies
View Related
Aug 30, 2006
I am looping through each cell in a range and I would like to loop in reverse order.
Dim CELL As range
Dim TotalRows As Long
TotalRows = Cells(Rows.Count, 1).End(xlUp).Row
For Each CELL In Range("C1", "C" & TotalRows)
CELL.Select
'Code here to delete a row based on criteria
Next
I have tried:
For Each CELL In Range("C" & TotalRows, "C1")
and it does not make a difference. I need to loop in reverse order since what I am doing in the loop is deleting a row. I am looking at a cell and determining its value. If the value is so much, then the row gets deleted. The problem is that the next row "moves up" one row (taking the pervious cell's address) and therefore the For Each Next loop thinks it has already looked at that row.
View 7 Replies
View Related
Feb 7, 2008
I have some numbers in a column that I need to copy 12 times (each one) into another column. The problem is that I got like 200 records that will be converted in 15000 aprox. I've uploaded an example of what I need,
View 3 Replies
View Related
Nov 4, 2013
I have a workbook that contains, say, 50 worksheets: the first two worksheets summarise the data and are static in that they don't move position. However, the next four worksheets contain certain data for any given month. Each time a new month comes along, say, November, I insert four new worksheets after the two static ones as a result October's four worksheets are simply moved down the line in terms of worksheet order.
I need a macro to refer to the first six worksheets only (not the other tabs). I opted for index referencing for each worksheet, ie one - six. Now within these six worksheets in any given month, I need to sort the data by a certain column. The problem: in sheets 1,4,5 and 6 I need to rank by column E, but in sheets 2 and 3 I need to rank by column C. I have stepped through the code, which works for sheets 3-6, but doesn't seem to refer to sheets 1-2.
Sub WorksheetLoop()
'
' Loop through an indexed number of worksheets; _
' & this ensures that the worksheet range is dynamic _
' and is able to adjust when new sheets are added/removed, etc.
'
'Dim ws As Worksheet
Dim i As Long
Dim ws As Worksheet
[code]....
View 2 Replies
View Related
Oct 24, 2009
I've worked on a solution for this thread (http://www.excelforum.com/excel-prog...-automate.html) but have been mentally challenged with how to avoid changing the loop counter in one of the loops I have used to resort an array of file names from the getopenfile dialog.
The aim of the shown code (see post 12 of the above link for attached file) is to check if the file containing the macro is included in the array returned by getopenfile while sorting the array of file names, and if so, moving it to the end of the array for "deletion" by redimming the array to exclude the last item. This problem of the open file being selected in the dialog may never arise, but... as the OP's request in the other thread was to allow two-way comparisons between numerous files, I've considered it likely enough to test for.
Here's the code I have settled for esp between the commented lines of hash symbols, which does change the counter (see the commented exclamation marks), but prevents an infinite loop (on my second try!) by using a second boolean flag of "HasCounterBeenChanged". Is there a better way of doing this? Or, alternatively (not in my thread title), is it possible to prevent the active file being selected through one of the arguments in the getopenfilename method?
View 3 Replies
View Related
Aug 27, 2012
I am working on some code that loops through a column of number values. Whenever it encounters a number value and a blank cell in an offset column, it places that number value into an offset cell (forming a separate column to be compared to another column in a separate sheet). I would like to take all the values in that new column and begin placing them in a new column in a separate sheet adjacent to another table. Most of the time, these values should match the adjacent values in the separate worksheet. However, if they don't match, I would like a new row to be created for that mismatched value.
For example. This is the first worksheet. So far, my macro loops through the column with rows 1-5. It looks in the offset cell(0,2) for Isempty value and then places that value into the offset cell(0,6)
text
1
text
text
[Code]....
View 5 Replies
View Related
Aug 2, 2007
For Each loop can be instructed to loop starting the bottom of the range. I know that a For To Loop can handle looping from the bottom up,
Sub Filterout()
Dim c As Range
Dim rng As Range
Dim i As Long
Dim lrow As Long
Dim counter As Integer
lrow = Cells(Rows.Count, 3).End(xlUp).Row
Set rng = Range("c2:c36")
For Each c In rng
If Left(c.Value, 1) "~~" Then
c.EntireRow.Delete
End If
Next c
View 9 Replies
View Related
Nov 30, 2006
i have a problem with a nested loop:
it seems like the first instance of the code is running the way i want it to run, but when it starts with the second instance, it does the first search and copy, but it seems like the nested loop is being ignored.
am i doing something wrong?
dan
==========================================================
Thanks to Aaron Blood for the find_range function. i also poached the lastrow function from somewhere on ozgrid, but I cant remember the name of the poster.
==========================================================
Sub new2()
Dim Org_Area As Variant
Dim Item As Variant
Dim Copy_To1 As Variant
Dim Cell_Ref As Variant
r = 1 ..................
View 9 Replies
View Related
Dec 17, 2008
Can't seem to figure out why my Do Loop keeps giving me an Error of "Loop without Do".
View 14 Replies
View Related
Apr 28, 2009
I have got a loop which is working fine but now i need another loop which will run till the end but need to repeat itself as soon the column x become 1 the highest number would be 3
here is my main loop A1 = 5000
and second loop need to run inside the this loop
Sheet1.Activate
i = Range("A1")
For b = 1 To i
If Cells(1 + b, 3).Value = "P" Then
Cells(1 + b, 29).Value = 1
Else
If Cells(1 + b, 3).Value = "S" Then
Cells(1 + b, 29).Value = 2
Else
If Cells(1 + b, 3).Value = "C" Then
Cells(1 + b, 29).Value = 3
End If
End If
End If
Next b
View 9 Replies
View Related
Oct 28, 2006
I have loops working in other loops. The macro is almsot working well. It does the calculation i want but it fails to stop a loop, because of that, the macro can't run the next main loop (c), which is to move to the next cell where the calculations must be run.
I attach a file. the troubleshooting macroation is Sub Itiration.
The code of this macro are bellow. Basically, the loop using d as counter run into an endless loop. I don't how to stop this loop without affecting the results which are calculated correctly.
Sub Itiration()
Dim CurCell As Object
Dim TempSum As Double
Dim d As Integer
For c = 3 To Cells(3, 4)
If Cells(11, c) > 0 Then
For i = 1 To Cells(10, c)
Do
View 9 Replies
View Related
Nov 18, 2006
Going through a loop, I am trying to load pictures into an image box (or alternatively into a label) one by one i.e. going through the loop the first time, I want to load picture 1, then on the second loop, picture 2 and so on. A bit like an automated slide show.
I have written a simple loop and have used the loadpicture function to load the picture into the image box. When the code runs, the image box only gets populated after the last run through the loop. I have tried using application.screen updating function and the image.activate function without success. It is a simple bit of code and I expect an easy problem to solve if you know excel vba well.
View 6 Replies
View Related
Apr 8, 2007
My code below goes into an infinite loop, with culprit line shown in bold and underline...
View 4 Replies
View Related