I'm looking to see if there is a way to take the decimal place formatting of cell and apply it to other cells.
For example, if someone types in 0.0001 into a source cell, I'd like to take that decimal formatting and apply it to other destination cells. This way when values are typed into those cells it will automatically display 4 places past the decimal, no matter what the value. ie 50 will display 50.0000
Basically, I want to format a group of cells to display 1 decimal figure if the number is not a whole number. If the number is a whole number (or if the rounded first decimal place is 0) I want it to display no decimal.
View 9 Replies View RelatedI would like to be able to add one decimal place to each cell in my range.
Example:
111.111 becomes 111.1110
22.22 becomes 22.220
3.3 becomes 3.30
There are no standards here, I just want to be able to add that last decimal place. I need cells to remain in "Number" format also.
I am trying to found or create a formula that will display cell width to the decimal place.
I can use the formula Cell("width"), but it rounds to the nearest integer. I need to display the decimals. For instance, if the actual column width is 8.43, the Cell("Width") formula will display 8. I need it to show 8.43.
Column b in sample is conditionally formatted based on it's values. I want to also apply that same formatting to the person's name in the chart in D2:I9. For example, Jeff is in bottom 50% so cell B2 is shaded red with red text. I would like to apply that same red shade and red text to all the cells in my chart that say Jeff. Also, as example, all of the cells in my chart that say Kelsey would be formatted with green shade/green text and so on...
View 1 Replies View RelatedIs there a way to apply conditional formatting to a range of cells that contains formulas?
View 6 Replies View RelatedI am having trouble getting some conditional formatting to apply to all cells in a column in a pivot table. Currently, the conditional formatting is only applying to the top level items in the pivot but is not applying to the lower level items. I can see why it is doing this. the range in "Applies to" is only specifying the rows that contain the top level items. I tried to change the range to D10:D647 but, it reverts back to just the top level items. How to get it to apply to everything?
Image attached : Capture.JPG
I am trying to figure out how to insert a decimal into a number. For ex: 1234 to become 12.34. I tried creating custom or special formatting but I cannot figure it out.
View 3 Replies View Relatedhow to control this,it should be 0.55. is they a wat too round off too next highest hole number? Here is a example.
View 2 Replies View RelatedI have a column of percentages where I only want to show 1 decimal place if the value is less than 1%. The rest of the percentages I want without decimal detail.
I've tried custom formats and cant quiet get it right. Am I close with this?
[>1]#.#%;###%
I have the value 26.06 in cell A1, I want to have everything left of the decimal place in Cell B1 and everything right of the decimal place in Cell C1, is this possible. Bearing in mind A1 will be variable (ie it could be 159.65).
View 9 Replies View Related is possible to construct a conditional formatting scenario and at the same time apply that formatting if the cell entry is within 10% either way of the logical test?
For example if you apply conditional formatting if the cell value is between 300-500 is it possible to add in a 10% swing on each value?
I downloaded the checkbook register from Microsoft.com and am trying to add a
few cells at the end to quickly calculate my outstanding debits and credits
so that I can balance my statements automatically. I figured out how to write
the formula properly (eventually), but the cells will not take on the
currency format no matter what I do. I have tried pasting the format from the
other cells within the register, tried clearing the format and reapplying the
currency format, tried accounting, etc.
Is there a way that I can remove the whole number to leave the decimal place.
1.69 should be 0.69
10.71 should be 0.71
0.48 should be 0.48
How can I restrict entry into a textbox to 1 decimal place?
View 9 Replies View RelatedI have an UserForm, where I have several text boxes. One of these textboxes should be entered with decimals. I have been able to cope with the declarations, and set the variable as Variant. However, is it possible to prevent the user inserting "," instead of "."? Alternatively, automatically change "," to "."?
View 2 Replies View RelatedI have a table. I want to apply conditional formatting to the entire table so that wherever a cell contains a dropdown list (validation list) the cell is formatted with a different colour.
View 3 Replies View RelatedI'm trying to apply conditional formatting (shading) to cells that are left blank.
(Purpose: I am designing a research template for a client to complete with data and want the spreadsheet to show them where they've "missed a bit"!)
(When I go to the conditional formatting box, it asks me to specify when "cell value is"..."between/not between/equal to/not equal to" etc. But there's no option to specify when the cell is blank.)
I am trying to export a range of data from excel to xml. I have a module that puts the range of data into one cell:
Code:
Function Concat(myRng As Range)
Dim myStr As String
Dim c As Range
myStr = ""
For Each c In myRng
If c.Value "" Then myStr = myStr & ", " & Chr(34) & c.Value & Chr(34)
Next
Concat = Mid(myStr, 2, 9999)
End Function
How to all data to come in with one decimal place (eg. "4.5","5.0",7.0")
Right now it looks like this:
("4.5","5",7")
I know how to set a conditional for a cell to change a color when i apply a specific value, but how about if i want to set E2 cell to change to green when i place a 'X' on F2?
Pretty much I want 2 columns that say Yes and the Other No. When i place a X on Yes that other cell turns green, if i place a X on No that other cell turns red.
if I change the formatting of a cell to 2 decimal places, it appears as two decimal places (as it should) for example $88.88888 will show as $88.88
However, when I use this data in another application that displays this data it will display as 88.88888 still. I need to actually take the value and truncate it to 88.88 eg 8.8888888 will become 8.88
I have been using trunc by hand and wanted to try and find out if there is a way that I could write some sort of macro to do this for me each time.
Any function in Excel, that would allow me to have a unit cost price (for example: 0.5432) and then for a table of figures containing the pack sizes to determine the correct unit price that would allow all pack costs to be at 2 decimal places. I have included an example below:
My spreadsheet would look like the following:
Cell A1 (Unit Cost Price) = .5814
Cell A3 (Pack of 75 units) = .5814*75 = 43.605
Cell A4 (Pack of 80 units) = .5814*80 = 46.512
Cell A5 (Pack of 100 units) = .5814*100 = 58.14
and so on
I need some way of making cell A1 change to a value that will cause all cells A3 to A5 to be 2 decimal places or less.
I am trying to use the status of Conditional Formatting to toggle on/off protection for a cell.
I have a cell with Conditional Formatting applied if the result of a formula is true. If the Conditional Formatting is applied, I want the cell protection turned on so a user can not change the entry in the cell. If Conditional Formatting is not applied (false), cell protection is turned off and the user may edit.
I am using Excel 2010 and Vista.
I am wanting to put a "1" in ROW 2, starting with COLUMN B until the sum reaches the value in cell A3.
Example: I have 10 in A3, I would like the macro to place a "1" in B2-K2.
I'm trying to place the value of "X" in multiple cells based on a cell variable (i). For example, if (i) is evaluates to 35, the following code ...
View 8 Replies View RelatedI need to run a loop through a column of values (attachment col B) and when it finds a "J" it will apply conditional formatting to a row of 4 cells directly adjacent. The attachment is a theoretical before & after.
View 2 Replies View RelatedI want to apply conditional formatting by VBA. Cell Q2 contains the month number, (in this case 11). I want each cell in the range D2:D50 to be filled in red and the word 'UNPAID' appear if Q2 is greater than 10 and the cell is blank, otherwise no formatting at all. I'd like this to be triggered on the Worksheet_SelectionChange event if at all possible.
View 4 Replies View RelatedI am trying to create a macro (which will go in an add-in, using Excel 2007) which will apply a custom format to any selected cells which have their formulae hidden (Format Cells, Protection, Hidden). A similar macro works fine for locked cells.
Here is the UDF I wrote, which returns True/False based on the Hidden status of a cell:
VB:
Public Function Hidden(Check_Cell As Range)
Hidden = Check_Cell.FormulaHidden = True
End Function
[Code]....
just place all three pieces of code into a module, and change the first line of the two macros to a standard "Sub Macro1()" type format.
I have this macro and all I want to do is apply it to every page of my worksheet with a loop and can't find what kind of loop I need:
Sub format()
' Keyboard Shortcut: Ctrl+r
'
ActiveCell. Offset(-37, 0).Rows("1:1").EntireRow.Select
Selection.Copy
ActiveCell.Offset(37, 0).Rows("1:1").EntireRow.Select
ActiveSheet.Paste
Application.CutCopyMode = False
ActiveCell.Range("A1:K37").Select
Selection.Borders(xlDiagonalDown).LineStyle = xlNone
Selection.Borders(xlDiagonalUp).LineStyle = xlNone
With Selection.Borders(xlEdgeLeft)
.LineStyle = xlContinuous
.Weight = xlMedium
.ColorIndex = xlAutomatic
End With
I have a workbook that contains 168 sheets of data (it's an extract from a PM tool) which is effectively a status report from each project in our portfolio. Contained within each status report are some financial data that shows a Plan number and a Forecast number for which I want to apply conditional formatting to this section (this is the same section for each sheet), to all the 168 sheets without having to go individually into each sheet. I have searched here and all the varying responses to a similar situation as mine, do not cater for the number of sheets that I have. And I need to do this on a monthly basis at monthend. So in the example below I want to apply conditional formatting if the Forecast (Cols D & G) are greater than Plan (Cols B & E). Is there a way of doing this just with the conditional formatting or would it need a VBA script?
Col A Col B Col C Col D Col E Col F Col G
Financial Summary - Selected Project Currency: USD
Current year total cost
Overall project cost
[Code] .....