Add One Decimal Place To Each Cell In A Range?

Mar 13, 2014

I would like to be able to add one decimal place to each cell in my range.

Example:

111.111 becomes 111.1110

22.22 becomes 22.220

3.3 becomes 3.30

There are no standards here, I just want to be able to add that last decimal place. I need cells to remain in "Number" format also.

View 1 Replies


ADVERTISEMENT

Need To Calculate Cell Width To Decimal Place

Mar 25, 2014

I am trying to found or create a formula that will display cell width to the decimal place.

I can use the formula Cell("width"), but it rounds to the nearest integer. I need to display the decimals. For instance, if the actual column width is 8.43, the Cell("Width") formula will display 8. I need it to show 8.43.

View 3 Replies View Related

Take Decimal Place Formatting Of Cell And Apply It To Other Cells?

Jul 3, 2014

I'm looking to see if there is a way to take the decimal place formatting of cell and apply it to other cells.

For example, if someone types in 0.0001 into a source cell, I'd like to take that decimal formatting and apply it to other destination cells. This way when values are typed into those cells it will automatically display 4 places past the decimal, no matter what the value. ie 50 will display 50.0000

View 7 Replies View Related

Decimal Place In Number

Dec 5, 2008

I am trying to figure out how to insert a decimal into a number. For ex: 1234 to become 12.34. I tried creating custom or special formatting but I cannot figure it out.

View 3 Replies View Related

Decimal In Wrong Place

Mar 13, 2009

how to control this,it should be 0.55. is they a wat too round off too next highest hole number? Here is a example.

View 2 Replies View Related

Show Decimal Place Only If Value Is Less Than 1%?

May 22, 2012

I have a column of percentages where I only want to show 1 decimal place if the value is less than 1%. The rest of the percentages I want without decimal detail.

I've tried custom formats and cant quiet get it right. Am I close with this?

[>1]#.#%;###%

View 2 Replies View Related

Splitting A Value At The Decimal Place...

Mar 19, 2008

I have the value 26.06 in cell A1, I want to have everything left of the decimal place in Cell B1 and everything right of the decimal place in Cell C1, is this possible. Bearing in mind A1 will be variable (ie it could be 159.65).

View 9 Replies View Related

Removing Whole Number To Leave Decimal Place

Jan 7, 2009

Is there a way that I can remove the whole number to leave the decimal place.

1.69 should be 0.69
10.71 should be 0.71
0.48 should be 0.48

View 8 Replies View Related

Restrict Textbox Entry To 1 Decimal Place

Dec 2, 2006

How can I restrict entry into a textbox to 1 decimal place?

View 9 Replies View Related

Force Decimal In Place Of Comma In TextBox

Jan 18, 2008

I have an UserForm, where I have several text boxes. One of these textboxes should be entered with decimals. I have been able to cope with the declarations, and set the variable as Variant. However, is it possible to prevent the user inserting "," instead of "."? Alternatively, automatically change "," to "."?

View 2 Replies View Related

Excel - XML Number Format (All Data To Come In With One Decimal Place)

Sep 23, 2013

I am trying to export a range of data from excel to xml. I have a module that puts the range of data into one cell:

Code:

Function Concat(myRng As Range)
Dim myStr As String
Dim c As Range
myStr = ""
For Each c In myRng
If c.Value "" Then myStr = myStr & ", " & Chr(34) & c.Value & Chr(34)
Next
Concat = Mid(myStr, 2, 9999)
End Function

How to all data to come in with one decimal place (eg. "4.5","5.0",7.0")

Right now it looks like this:

("4.5","5",7")

View 3 Replies View Related

Excel Goal Seek Function For Finding Values To Certain Decimal Place

Feb 17, 2010

Any function in Excel, that would allow me to have a unit cost price (for example: 0.5432) and then for a table of figures containing the pack sizes to determine the correct unit price that would allow all pack costs to be at 2 decimal places. I have included an example below:

My spreadsheet would look like the following:

Cell A1 (Unit Cost Price) = .5814
Cell A3 (Pack of 75 units) = .5814*75 = 43.605
Cell A4 (Pack of 80 units) = .5814*80 = 46.512
Cell A5 (Pack of 100 units) = .5814*100 = 58.14
and so on

I need some way of making cell A1 change to a value that will cause all cells A3 to A5 to be 2 decimal places or less.

View 3 Replies View Related

Multiple Cell Values Into A Variable - Then Place In Another Range?

May 17, 2014

how to set a cells value into a variable, using .value, then set another cells value equal to that variable without using copy/paste

What I can't figure out is how to see the value of multiple cells to a variable and place them into another range of the same size using .value. It would be nice to free up the clipboard.

View 2 Replies View Related

Macro To Copy And Place Data To Specific Place

Feb 22, 2007

I am after a macro to do the following, my visual basic skills are very limited (non existant):- Look at the date in cell A1 on Sheet 'Live Report' and err 'remember it' Copy a range of cells from A3 to A10 on 'Live Report' Go to sheet 'Monthly Summary' and find the date that had been remembered previously (this date will be in column A on 'Monthly Summary' which will probably be a mixture of values and formulas). After the date has been found paste special and transpose the 'values only' copied range from 'Live Report' (A3 to A10) in column B on 'Monthly Summary' next to the date that has been found in Column A.

View 2 Replies View Related

Code To Find A Certain Range And Place It In Cells

Sep 10, 2008

I have 26 ranges defined on my worksheet sheet3. Each range is 10 rows high and 4 columns wide. On my sheet1, I'd like to be able to go automatically to a specific range on sheet3 (I need to provide the choice to go to any of the 26 ranges), selected perhaps by a combobox. The ranges are building occupancy groups like A1, A2, B, E, R1, R2, etc. (26 of them). Then I'd like the user to look at each row in that particular range, select one, and then have the four values in that row placed in corresponding cells on sheet1.

I have this set up now using a four column combobox, and it works just like I want, except that only the first column of data is displayed after a row is selected. If I could get those four cells of data as they appear in the combobox inserted on sheet1, I'd be fine. But I can't. So I'm looking for a work-around. Basically, my goal is to get a specific row of data (4 cells wide) from my named ranges copied into cells on sheet1. But I need to be able to get to the correct range automatically.

View 9 Replies View Related

Taking The Value Of A Range Of Cells From One Workbook And Place Them In Another

May 12, 2007

I've been trying to learn how to write code in VBA. I've been learning for about 2 weeks now (trying to learn it for work) and heres my problem. I have a macro that will create a pivot table from raw data that I input. From this pivot table, I want to go to the last row in the pivot table (the row that takes grand totals of each column of data). I want to write a macro that will take those values (located in a workbook called AR age sorting) and place them in cells in another workbook (called AR aging analysis). Basically cells D6-D9 in workbook "AR aging analysis" should equal the values of the last row in my pivot table in workbook "AR age sorting" (last cell with data in columns J-M). I thought this would be easy but I've run into some issues. Heres the code I use:

Sub aging_summary()
Dim Sheet1 As Worksheet
Dim Sheet2 As Worksheet
Set Sheet1 = Sheets("AR age sorting")
Set Sheet2 = Sheets("AR aging analysis")
For n = 10 To 13
For M = 6 To 9
Sheet2.Range(Cells(M, 4), Cells(M, 4)). _
Value = Sheet1.Range(Cells(n, 1), Cells(n, 1)). _
End(x1Down).Value

Next M
Next n
End Sub

I don't want it to copy and paste the values since I just need the value, not all the extra formatting and what not that is incorporated in the pivot table. When I try to run this I get an error message, saying that there is an application-defined or user-defined error.

View 2 Replies View Related

Place Chart On Specific Range Macro

Aug 1, 2007

I'm working on an assignment that pulls information for different countries and I'd like to know how to go about placing the charts on a specific area. Any help would be greatly appreciated!

The concept:

With each click of a country, the country's information will be pulled from a 'data dump' that I created in the same file. The map and flag are also shown. Some of that information is just using lookups, or a combination of lookups and code, and the hardest part are the GRAPHS - which I'm having a really hard time placing and adjusting accordingly.

The problem:

As of now the charts are automatically filled as the user clicks a new country, but all of the charts are placed in weird locations, but I'd like for them to be placed in the specified ranges above.

I would like charts in the following ranges:

A20:B30 (Immigrant Group)
D20:E30 (Ethinc Group)
F20:G30 (Languages)
F13:G19 (Religion)
D10:E17 (Age structure)

This is the major part of my project that I need to complete. Any help would be greatly appreciated, PLEASE. =)

Right now I have ranges that aren't accurate, but regardless of how I try to show my range, the function does not work:

Sub CreateCharts()
Dim counter As Integer, chartname As String, xvals As String, offset As Integer, Range As String

'Delete all charts
Dim oc As ChartObject
For Each oc In ActiveWorkbook.ActiveSheet.ChartObjects
oc.Delete
Next oc

View 6 Replies View Related

Add Decimal Part In A Range

Mar 9, 2008

How can I add decimal part of values in a range

eg: assume my range has 2.27, 3.1, 3.725, 4.1, 4.35

result should be 789 (27+1+725+1+35)

View 9 Replies View Related

Offset Formatting: Place A Header 2 Rows Above This Range Which Is Aligned On The Left

May 4, 2009

i have a range of cells which is nxn where n>1. i want to place a header 2 rows above this range which is aligned on the left. this is what i tried:

View 3 Replies View Related

Fill In The 3 Criteria Fields, Calculate The Result, Copy The Result, And Place It Into The Correct Place On The Table

Oct 19, 2006

I have a macro that imputs data from an external database and puts it into a temporary worksheet. This data has 3 columns (ID, Date, Amount). I am then making another sheet which has X number of tables (one for each ID), with the years being the column headings, and months being the row headings. ie.

| ID X
| +------+------+------+--->
| | 1999 | 2000 | 2001 |
+------+------+------+------+--->
| Jan | $100 | $250 | $300 |
+------+------+------+------+--->
| Feb | $200 | $300 | $200 |
+------+------+------+------+--->
| Mar | $300 | $250 | $100 |
+------+------+------+------+--->
| Sum | $600 | $800 | $600 |
| +------+------+------+--->

| ID Y
| +------+------+------+--->
| | 1999 | 2000 | 2001 |
+------+------+------+------+--->
| Jan | $100 | $250 | $300 |
+------+------+------+------+--->
| Feb | $200 | $300 | $200 |
+------+------+------+------+--->
| Mar | $300 | $250 | $100 |
+------+------+------+------+--->
| Sum | $600 | $800 | $600 |
| +------+------+------+--->

Currently I have a few hidden fields for the DSUM Criteria. I start making the tables. And then filling in table based off of the month and year. Doing so I need 3 criteria:
>= First Day of the Month
<= Last Day of the Month
= ID #

The problem is it takes Excel too long to fill in the 3 criteria fields, calculate the result, copy the result, and place it into the correct place on the table. Is there another way to get this data into the correct tables faster? Instead of using DSUM?

View 8 Replies View Related

Paste Two Decimal Number In Excel Without Extra Decimal Places Appearing

Aug 13, 2009

I have a vba macro that takes data from one workbook and pastes it into another workbook. In doing this I have declared a few variables of type single (I only need two decimal precision). However, when I copy the values from the cells on the source workbook and paste them into the target workbook, the numbers end up having 12 decimal places. Ultimately, this extra precision causes my totals to be off by .01 or more after a while. I have tried rounding the number as I pull it off the source workbook into the variable, but that didn't matter. How do I solve this problem? Code for pulling data from source workbook:...

View 2 Replies View Related

Formatting Group Of Cells To Have Different Decimal Rules Based On Decimal Value

Aug 3, 2006

Basically, I want to format a group of cells to display 1 decimal figure if the number is not a whole number. If the number is a whole number (or if the rounded first decimal place is 0) I want it to display no decimal.

View 9 Replies View Related

Removing Decimal Point While Maintaining # Of Decimal Places

Jun 10, 2009

I need to convert a column of numbers currently formatted with 2 decimal places e.g. 112.12 to 4 decimal places (without the decimal point). I need the end result to be 1121200. I've tried a few different suggestions given on the forum previously but can't seem to retain the 4 decimal places that I require.

View 4 Replies View Related

Conversions Of Decimal Feet To Decimal Inches - Formula?

Apr 15, 2012

I have to make a excel document in which I have length and width in feet and inch format.

E.g. 10.01 in which 10 is feet and .01 is inch

I have all the length and width values in the above format. And what I want to do is convert the inch value (10.01) to feet value (.01=.08 feet) .

Just like the calculator here does.. [URL] ........

Like
10.01=10.08
10.02=10.16
10..03=10.25
...and so on...

Here is table of conversions from inches to decimal feet. But I don't know how to get a formula for this in excel...????

Inch Decimal of a Foot
1 inch 0.0833
2 inches 0.167
3 inches 0.250
4 inches 0.333
5 inches 0.417
6 inches 0.500
7 inches 0.583
8 inches 0.667
9 inches 0.750
10 inches 0.833
11 inches 0.917
12 inches 1.000

View 7 Replies View Related

Convert Or Format Decimal To X Digits Without Decimal Point

Aug 8, 2008

I am trying to create a unique sample code by putting together the values of other cells that a user will input. It's all working well apart from the last part, where I am trying to include a decimal number. I want the decimal number to appear without the central "." and in a four digit format. e.g. 2.5 would appear as 0250, 14.25 would appear as 1425. This is the formlua I am using currently:

=IF(ISBLANK(B4),"",IF(LEFT(C4,1)="w",(B4&"-"&TEXT(F4,"YYMMDD")&C4&TEXT(G4,"HHMM")),(B4&"-"&TEXT(F4,"YYMMDD")&C4&LEFT(TEXT(H4,"00"),2)&RIGHT(TEXT(H4,"00"),2))))

However, where the value of H4 is 2.5, I am getting a result of 0303 (I've put this part in bold). I have attached a small spreadsheet to aid understanding.

View 2 Replies View Related

Calculate Decimal Portion Of Decimal Number`

Jun 10, 2007

I need a formula to multiply only the decimal number in a cell and not the integer. For example: the number in the cell is 57.3615. I want to multiply .3615 only.

View 2 Replies View Related

Truncate Range Of Numbers Where Number Will Not Show More Than 2 Past The Decimal

Oct 21, 2013

How do I truncate a range of numbers where a number will not show more than 2 past the decimal ....and this be in vba as part of a macro.

View 3 Replies View Related

Place Sheet / Tab Name In Cell

May 7, 2014

How do I do this?

View 3 Replies View Related

Place Cell Value Into Function

Jan 6, 2012

I need to place cell value into one function (I cannot modify this function it is built in) .

For example:

Function is

CODE
A2=KGF
=ABCDFE_(my value of A2 thus KGF)_GHIJKL

Thus the end result:

=ABCDFE_KGF_GHIJKL

I can concatenate the string but I cannot evaluate it .

=CONCATENATE("ABCDFE_",A2,"_GHIJKL")

is there a way to do it ?

View 4 Replies View Related

Place Text In A Cell

Oct 8, 2007

Is it possible to place Text in a Cell if a CF is True?
So Far I am unsuccessful.
I have this CF in Column S

=IF(ISBLANK(R10346),"Need Dept & Cat")

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved