Trigger Macro After 15 Seconds

Feb 22, 2009

I want to trigger a macro that refreshes a pivot table but I only want to trigger the macro after 15 seconds. The reason is that I am pulling the source data from access mdb so I want only to refresh the data once the data is pulled.

View 3 Replies


ADVERTISEMENT

Converting Minutes, Seconds And Tenths Of Seconds Into Seconds

Jan 18, 2010

I want to change 1 minute 24 seconds and 5 tenths into a seconds number. So basically it would come out as 84.50 seconds.

View 4 Replies View Related

Adjust Code From Cell Range Trigger To Button Trigger

Jul 1, 2014

I have the code below that is two separate activities and I want to change the second activity from a cell trigger (Set KeyCells = Range("K42:AD42")) to a button trigger. I need to first to remain unchanged.

I'd be ok if this was just one macro that I could assign to a button but because its two and I need to write the second's to clicking a button I'm over my head.

Its occured to me while writing this that because it'll be a range of buttons I'll probably need to make each one an individual code? Is this the case? If so I may have to just keep this as it is.

View 2 Replies View Related

Convert Decimal Minutes & Seconds To Total Seconds

Sep 23, 2007

How can I Convert Decimal Minutes & Seconds To Total Seconds?

Here is the sample

View 4 Replies View Related

Convert Hours, Minutes And Seconds Into Total Seconds

Jun 28, 2008

I trying to figure a formula to convert time on a phone call eg. 01:01:21 into total seconds (3661). Phonecalls will never be more than an hour long but the spreadsheet I will be supplied with (havn't got it yet!) will display them in the 00:00:00 format.

View 5 Replies View Related

How To Trigger Macro On A Condition

Jan 25, 2014

Is it possible to trigger a macro on a condition like this?

If date more than 1 week arrange date in sequence order.

View 2 Replies View Related

Drop-down Box Value To Trigger Macro

Jun 21, 2006

A1 is a drop-down list, created from Data> Validation>List, which lists 3 different words (Text1, Text2, Text3). I have recorded 3 macros (Macro1, Macro2, Macro3). Here's what I want to happen:

When Text1 is selected in A1, I want Macro1 to run (same for Text2/Macro2 and Text3/Macro3). I want the user to be able to change this value as many times as they wish and have the corresponding Macro run each time. I've tried creating the appropriate code in Editor using other threads on this forum, but I can't seem to figure it out.

View 8 Replies View Related

Trigger A Macro On Workbook Close?

Dec 5, 2008

When I open my workbook it also opens a separate workbook and hides second book.
when I close myworkbook I want to unhide the hidden one and close it without saving.

View 4 Replies View Related

Trigger Macro At The Start Of The Month

Feb 18, 2009

is possible to trigger a macro at the start of every month. I have a fairly simple bit of VBA, but just want it to execute on the 1st of every new month.

View 3 Replies View Related

Trigger Actions For Three Choices In A Macro

Dec 30, 2009

I have a series of macros altering various workbooks and sheets. They're numbered Step1, Step2, etc. In my Step5 I have a series of Case statements in a macro, and I don't know how to get it to do what I want next. I have NOT tried running this code yet, and I'm sure I have something(s) wrong in it.

1) If the selection in DstWbk, sheet "Steps", is "01DSP" through "11DSP" the macro needs to delete specific columns in the SrcWbk, and then move to the next step (6).

2) If the selection in DstWbk, sheet "Steps", is "*DSP" the macro needs to go directly to the next step (6)

3) If the selection in DstWbk, sheet "Steps", is anything else the macro needs to flash a generic "No Data found" message and move on to Step7.

The part of the code that's throwing me begins at 'Select only the specific regional data' and ends at the "Case Else MsgBox"

View 3 Replies View Related

Trigger A Macro On Arrow Keys

Apr 24, 2007

I'm creating a small Excel RPG where the player moves the around a blank worksheet with the walls of a maze appearing as you approach them (think dark corridors, you can see only 1 cell in all directions around you).

The players current location is shown by excel setting the activecell to the players location. Currently I have four buttons labeled Up, Down, Left and Right which the player clicks to move in the desired direction.

The testers were frequently missing the four movement buttons and this would put the activecell outside of the maze next to one of the buttons. They'd have to move it back manually.

I would like for the players to move around using the arrow keys to use the activecell, as you would normally move around a sheet... but before each movement there is a procedure that check IF the player can move in the desired direction or not (cell borders used for walls), and then once they've moved there are more procedures to check for monsters treasure chests etc.

How can I make the arrow keys trigger the macros that the Up, Down, Left and Right buttons currently trigger, and not just move the activecell?

View 9 Replies View Related

Trigger A Macro :: Event On Enter

Jun 28, 2008

Does anyone no a way to trigger a macro by just using the enter key in a difined rage ("A1:A100") Not worksheetchange

View 9 Replies View Related

Trigger Macro With Worksheet Tab Selection

Jan 14, 2004

I have a macro I'd like to run when a worksheet tab is selected. The macro updates content in various cells.

That action is now triggered with a command button (linked to macro), but I'd like it to take place when the user selects that worksheet tab.

View 9 Replies View Related

Convert Seconds Into Hours:Minutes:Seconds

Jun 18, 2008

Is there an easy way of converting seconds from using a time into hours, minutes, seconds

View 9 Replies View Related

Converting Seconds Or Minutes:Seconds To A Number

Jun 21, 2009

How would I go about converting - for example:

0:22 (formated general) to a number = 22

or

1:30 (formated general) to a number = 90

View 9 Replies View Related

Hours:minutes:seconds Convert To Seconds

Jul 13, 2006

I am trying to convert a number of "hours" "minutes" and "seconds", to give me a result in seconds only, in order that I may then financially cost the amount of time spent on a task. (A time and motion costing exercise)

Example:

1119:48:06
Represents 1119hours:48minutes:36seconds spent on a task.

I can manually convert this to 4031286 seconds, but it just takes too much time !!!(sorry!)

The data is extracted from a database which is unable to split the hours,minutes,seconds into seperate fields, which prevents me from using three cells in excel.

View 9 Replies View Related

Convert Seconds Into Hours, Minutes & Seconds

Dec 7, 2007

I have a spreadsheet that imports data relating to phone call durations. The information imports as a total number of seconds taken.

What I need to do is to change that number of seconds into hours, minutes and seconds.

Changing the format of the cells doesn't work.

I've tried everything I can think of, and run out of ideas.

example:

23 needs changing to 00:00:23
96 needs changing to 00:01:36
268 to 00:04:28
9374 to 02:35:14

View 7 Replies View Related

Macro To Move Data With Trigger Cell

Feb 21, 2010

I have a single workbook with five spreadsheets. My goal is to move data along a path (or work flow) from one sheet to the next by using a "trigger" pulldown menu choice.

Sheet1 = Prospects
Sheet2 = New Sale
Sheet3 = Upgrade Sale
Sheet4 = Won
Sheet5 = Lost
Sheets 1, 2, and 3 use the same data layout for column A - K.
Sheets 4 and 5 have the same A - K as above and also have columns L - R in common.
The last column in sheet 1, 2 and 3 is a pulldown menu (New, Upgrade, Won, Lost).

Data rows on each sheet start at row 7.

The goal is to use the pulldown choice to remove the data from the current sheet (ex: Prospect) and add it to the next open row in the required sheet (ex: New or Upgrade). I also need to be able to make a similar move from New/Upgrade to Won or Lost.

View 11 Replies View Related

Trigger Sheet Change Target Macro?

Jun 19, 2013

If for example cell A1 begins empty with no data in it other than a formula and something occurs to change the state of cell A1 to a value which triggers a change in cell B1 (a variable), can I use this to fire a sheet change macro ????

Wish to trigger a macro on sheet change based on every cell in column C, is this even possible ???

Or, is a change in a variable (C1) for example, the same as that of a DIRECT user keyboard input for example ???

Code:

Private Sub Worksheet_Change(ByVal Target As Range) Dim c As Range
If Not Application.Intersect(Target, Columns(3)) Is Nothing Then
Application.EnableEvents = False
For Each c In Target

[Code]...

View 7 Replies View Related

Trigger Before Close Macro Only If Changes Have Been Made Since Last Save

Jul 2, 2013

I am using the...

Private Sub Workbook_BeforeClose(Cancel As Boolean)

... to capture when a user is about to close a workbook. I then give them a message: "Are you sure you want to exit? Changes you made since you last saved will be lost."

However, to make it neater, is there a way to only trigger the macro if they have made changes since the last save? In other words, if they have not made any changes since the last save, the message will not be displayed, since it is irrelevant.

View 2 Replies View Related

Trigger Macro When Cells Changed By VLookup

Dec 6, 2013

Colouring calendar entries based on a date match... VBA to colour a cell on each line based on date match

The code works fine if you change the date in the cell and press enter however my date changes are triggered via a Vlookup which the code doesn't recognise has changed so doesn't trigger the macro.

Is there any way to amend the VBA code shown below so that it triggers the macro when dates are changed in column I via Vlookup?

Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("I:I")) Is Nothing Then Exit Sub
Application.ScreenUpdating = False
Target.EntireRow.Interior.ColorIndex = xlNone

[Code] ......

View 3 Replies View Related

Trigger Macro Once On Data Change In Cell

Mar 8, 2008

I have an application that updates the text string in A1 every x minutes (time may vary). I'm trying to develop a toutine that will trigger a Macro/call a function/subroutine once only on each change of data (and then not trigger again until the next change...and must only trigger on change of data in this specific cell). So the timeline looks like this

start A1 = "Apples", Fire macro once

start + 10mins A1 = "Oranges", Fire Macro Once again

start + 25mins A1 = "Pears", Fire Macro Once again

etc.

Triggering the macro is no problem but constraining to one triggering is proving a problem (for me anyway) and is really holding up my application progress.

View 5 Replies View Related

Trigger Macro By Any User Initiated Sorting Action

Jul 26, 2014

I'm using macros to apply some complex sorting criteria. It is also applying some cell formatting specific to the sort criteria being applied.

At the start of each macro, I'm resetting all cell formatting to remove any formerly applied formatting that is not correct for the new sort criteria. Basic stuff.... works fine.

Now I need to ensure all formatting created by any macro-generated sort gets removed if a user applies a sort using any sort function from the Ribbon. (Reset all formatting prior to any 'manually applied' sort).

I can create the macro to reset the formatting, just not sure how to trigger it upon user action.

Is it possible to trigger a short macro to reset cell formatting when a user applies a sort using the Data>Sort, Data>Sort Ascending, or Data>Sort Descending commands from the Ribbon?

View 9 Replies View Related

Macro To Run After 30 Seconds

Sep 30, 2009

Is there a way to make a macro delay for like 30 seconds before it does its thing? What I'm trying to do is have something turned off before the spreadsheet is saved, and after the spreadsheet is saved have a macro that runs 30 seconds afterwards to turn said feature back on. On error this macro will simply terminate.

View 5 Replies View Related

Converting Seconds Into Minutes And Seconds?

Jan 29, 2013

I have been trying for the last two weeks to convert a list of seconds into minutes and seconds, but just can not do it?

Below is an example of my raw data, that I need to convert into minutes and seconds:

120000

120000

120000

2880000

480000

[code].....

View 5 Replies View Related

Macro To Remove Seconds From Timestamp

Apr 28, 2008

I have a column of cells in my worksheet that look like this:

1/1/2007 10:53:31 AM
1/1/2008 8:35:46 AM
1/1/2008 8:35:54 AM
1/10/2008 1:39:26 PM

As you can see this is a timestamp in the format: m/d/yyy hh:mm:ss a/pm

The problem is that Im trying to import this data into another program that accepts the same format without the SECONDS field: m/d/yyy hh:mm a/pm

Since I have thousands of rows of data it just isnt feasible to go through and manually remove the seconds data from each cell.

Is there a macro or some other shortcut that can do this?

The ultimate goal would be to have the data above end up looking like this:
1/1/2007 10:53 AM
1/1/2008 8:35 AM
1/1/2008 8:35 AM
1/10/2008 1:39 PM

View 11 Replies View Related

Automatically Run Macro Code Every X Seconds

May 2, 2008

i have a caclulate event that I want to run constantly while the workbook is open. How can I do this? below is the code for the calculate event:

Private Sub worksheet_calculate()
If Sheets("Messing Around"). Range("e14") <> changeval Then
Range("e15:e100").ClearContents
If ActiveSheet.Range("E14").Value = "T1/E1" Then
Sheets("Tables").Range("J2:J79").Copy
Sheets("Messing Around").Range("e15").Activate
ActiveCell.PasteSpecial Paste:=xlPasteValues
ElseIf ActiveSheet.Range("E14").Value = "DS3/E3" Then
Sheets("Tables").Range("k2:k79").Copy................

View 4 Replies View Related

Macro Takes Seconds In XP And 2003, Minutes In Vista And 2007

Sep 10, 2008

I have a fairly simple macro that takes a few seconds on my XP-computer with Excel 2003 but takes several minutes on my Vista-computer with Excel 2007.

The XP-PC has 2GB memory, the Vista-PC only 1GB, but it's hard to believe it's only that.
Is Excel 2007 so much slower than 2003?

The macro makes quite extensive use of the .rows(Rownr).Delete method. Is the fact that 2007 has 1 million rows against the 65536 of 2003 the culprit? It has to shift much more data up when deleting a row, no?

View 9 Replies View Related

Trigger Macro On Cell C2 When Input In Cell B2

Jun 10, 2014

Any way to trigger a macro in one cell whenever there's an input in another cell.

Attached is the example excel of what I want to achieve.

macro trigger.xlsx‎

View 9 Replies View Related

How To Trigger A Message Box?

Dec 17, 2007

how to trigger a message box?

if i type TP123 in cell A1 i want it to trigger a message box with a comment

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved