Macro To Move Data With Trigger Cell
Feb 21, 2010
I have a single workbook with five spreadsheets. My goal is to move data along a path (or work flow) from one sheet to the next by using a "trigger" pulldown menu choice.
Sheet1 = Prospects
Sheet2 = New Sale
Sheet3 = Upgrade Sale
Sheet4 = Won
Sheet5 = Lost
Sheets 1, 2, and 3 use the same data layout for column A - K.
Sheets 4 and 5 have the same A - K as above and also have columns L - R in common.
The last column in sheet 1, 2 and 3 is a pulldown menu (New, Upgrade, Won, Lost).
Data rows on each sheet start at row 7.
The goal is to use the pulldown choice to remove the data from the current sheet (ex: Prospect) and add it to the next open row in the required sheet (ex: New or Upgrade). I also need to be able to make a similar move from New/Upgrade to Won or Lost.
View 11 Replies
ADVERTISEMENT
Mar 8, 2008
I have an application that updates the text string in A1 every x minutes (time may vary). I'm trying to develop a toutine that will trigger a Macro/call a function/subroutine once only on each change of data (and then not trigger again until the next change...and must only trigger on change of data in this specific cell). So the timeline looks like this
start A1 = "Apples", Fire macro once
start + 10mins A1 = "Oranges", Fire Macro Once again
start + 25mins A1 = "Pears", Fire Macro Once again
etc.
Triggering the macro is no problem but constraining to one triggering is proving a problem (for me anyway) and is really holding up my application progress.
View 5 Replies
View Related
Jul 1, 2014
I have the code below that is two separate activities and I want to change the second activity from a cell trigger (Set KeyCells = Range("K42:AD42")) to a button trigger. I need to first to remain unchanged.
I'd be ok if this was just one macro that I could assign to a button but because its two and I need to write the second's to clicking a button I'm over my head.
Its occured to me while writing this that because it'll be a range of buttons I'll probably need to make each one an individual code? Is this the case? If so I may have to just keep this as it is.
View 2 Replies
View Related
May 12, 2014
I have an issue with groups of data in a row, that I need to copy into a new row beneath the original. I need a formula or VBA that will perform this function:
If any data is present in columns AG-AK, then copy that data into a new row below, into cells AB-AF. Also copy column B (this data is always present, it is the name of the project data contained in the original row)
If any data is present in columns AL-AP, then copy that data into another new row below, into cells AB-AF. Also copy column B (this data is always present, it is the name of the project data contained in the original row)
View 3 Replies
View Related
Mar 26, 2013
writing a Macro which will move data from a cell to an adjacent cell.
E.g Column B has only data in certain cells, I would like the Macro to work down the column and every time it encounters data in Column B to move it into the adjacent cell into Column A.
View 4 Replies
View Related
Mar 25, 2014
I have a worksheet that has time clock information. I also have a resource on the web to see some information and even export it. In the exported data it looks as follows:
A1 contains an individuals name
B1 says times i.e. "8am to 5pm"
I would like a macro that takes the data from A1 and moves it to another worksheet in the B4 position down, and take the times from B1 and move the first time to the C4 position and the last time to H4.
View 9 Replies
View Related
Mar 4, 2008
I am trying to create a macro that will look in Column B for the word "RPLCASE." Whenever "RPLCASE" appears in Column B, the cells in that particular row will move over (Right) one space. I am simply trying to align the data from a file that I FTP'd from Net Term to Excel. You can see how the data should look in the 2nd example.
14-Feb-08JERRPLCASE671150536:116:56RPLCASE78308147:077:54RPLCASE89431228:228:57RPLCASE910592289:159:59RPLCASE10114732310:0010:48RPLCASE1112146811:4511:58RPLCASE12136563612:0612:56RPLCASE13144122113:0313:58RPLCASE14154642314:0114:23**********--------------TOTALS4632228LDLPKGPIK671361126:046:58PKGPIK781461247:007:56PKGPIK8963598:168:55PKGPIK9101591309:019:59PKGPIK101115113910:0010:54PKGPIK1112968711:3211:59PKGPIK121319916012:0012:59PKGPIK131412310313:0013:59PKGPIK141518716414:0014:59PKGPIK15161119715:0015:54PKGPIK16173316:3016:31**********--------------TOTALS13741178
View 9 Replies
View Related
Jun 10, 2014
Any way to trigger a macro in one cell whenever there's an input in another cell.
Attached is the example excel of what I want to achieve.
macro trigger.xlsx
View 9 Replies
View Related
Feb 22, 2009
I want to trigger a macro that refreshes a pivot table but I only want to trigger the macro after 15 seconds. The reason is that I am pulling the source data from access mdb so I want only to refresh the data once the data is pulled.
View 3 Replies
View Related
Jan 25, 2014
Is it possible to trigger a macro on a condition like this?
If date more than 1 week arrange date in sequence order.
View 2 Replies
View Related
Jun 21, 2006
A1 is a drop-down list, created from Data> Validation>List, which lists 3 different words (Text1, Text2, Text3). I have recorded 3 macros (Macro1, Macro2, Macro3). Here's what I want to happen:
When Text1 is selected in A1, I want Macro1 to run (same for Text2/Macro2 and Text3/Macro3). I want the user to be able to change this value as many times as they wish and have the corresponding Macro run each time. I've tried creating the appropriate code in Editor using other threads on this forum, but I can't seem to figure it out.
View 8 Replies
View Related
Mar 28, 2014
I have two worksheets. Sheet 1 has 2 columns, Column A the restaurant's name and Column B contains the review score. So sheet 1 is kinda like this:
Restaurant |Score
Ruby Tuesdays 80
TGIF 78
Outback 92
Sheet 2, Row 1 column B-E contain restraurant names (only on the top row, like field names).. i.e. I manually put the date in because typically the projected date is different from the actual review date.
-A----------- B ----------------C ------D-------- E-----
Date |Ruby Tuesdays|Olive Garden|TGIF|Ruths Chris|
I need the data from Sheet 1 Column B moved to sheet 2 in the next open row (i currently have data in row 1..the field names and down to row 35). This will be continuous so each time i need it to add the score as a new row in the correct field (restaurant name), IF the restaurant isnt listed, I want a new field named with the restaurant name and then place the score in the correct row and column. So, in the example I'd need Outback added.
View 9 Replies
View Related
May 12, 2013
I am working on a project and would like to see if there is a solution for it. i have a workbook that has data entry that is summarized at a master level but I need to automatically use a formula to update another sheet after clicking an udpate button. The data from the data entry sheet needs to be allocated to all the lines that has the same master item based on the formula. A test workbook is attached ...
View 1 Replies
View Related
Dec 5, 2008
When I open my workbook it also opens a separate workbook and hides second book.
when I close myworkbook I want to unhide the hidden one and close it without saving.
View 4 Replies
View Related
Feb 18, 2009
is possible to trigger a macro at the start of every month. I have a fairly simple bit of VBA, but just want it to execute on the 1st of every new month.
View 3 Replies
View Related
Dec 30, 2009
I have a series of macros altering various workbooks and sheets. They're numbered Step1, Step2, etc. In my Step5 I have a series of Case statements in a macro, and I don't know how to get it to do what I want next. I have NOT tried running this code yet, and I'm sure I have something(s) wrong in it.
1) If the selection in DstWbk, sheet "Steps", is "01DSP" through "11DSP" the macro needs to delete specific columns in the SrcWbk, and then move to the next step (6).
2) If the selection in DstWbk, sheet "Steps", is "*DSP" the macro needs to go directly to the next step (6)
3) If the selection in DstWbk, sheet "Steps", is anything else the macro needs to flash a generic "No Data found" message and move on to Step7.
The part of the code that's throwing me begins at 'Select only the specific regional data' and ends at the "Case Else MsgBox"
View 3 Replies
View Related
Apr 24, 2007
I'm creating a small Excel RPG where the player moves the around a blank worksheet with the walls of a maze appearing as you approach them (think dark corridors, you can see only 1 cell in all directions around you).
The players current location is shown by excel setting the activecell to the players location. Currently I have four buttons labeled Up, Down, Left and Right which the player clicks to move in the desired direction.
The testers were frequently missing the four movement buttons and this would put the activecell outside of the maze next to one of the buttons. They'd have to move it back manually.
I would like for the players to move around using the arrow keys to use the activecell, as you would normally move around a sheet... but before each movement there is a procedure that check IF the player can move in the desired direction or not (cell borders used for walls), and then once they've moved there are more procedures to check for monsters treasure chests etc.
How can I make the arrow keys trigger the macros that the Up, Down, Left and Right buttons currently trigger, and not just move the activecell?
View 9 Replies
View Related
Jun 28, 2008
Does anyone no a way to trigger a macro by just using the enter key in a difined rage ("A1:A100") Not worksheetchange
View 9 Replies
View Related
Jan 14, 2004
I have a macro I'd like to run when a worksheet tab is selected. The macro updates content in various cells.
That action is now triggered with a command button (linked to macro), but I'd like it to take place when the user selects that worksheet tab.
View 9 Replies
View Related
Feb 25, 2014
I'm looking for a macro to select data from a larger data set, and then put it in another worksheet. Basically, I want to select any cell in column A that contains "SO5" and move those to the column A of a separate worksheet. Then, for each cell that contains "SO5" would like to move to the right 5 columns and down 3 rows and select from that cell all the way to the end of the table. There may or may not be data in all of the table cells, so the selection should be based off of the column headers which will always have values. I would like to take that data and put it with the corresponding "SO5" in the new sheet.
Here's a sample:
MacroSample.xlsm
This is a simplified version, but I'm trying to get the data from sheet1 into the format in sheet2. Keep in mind that the number of columns and rows may change so it needs to be as dynamic as possible.
View 1 Replies
View Related
Jun 19, 2013
If for example cell A1 begins empty with no data in it other than a formula and something occurs to change the state of cell A1 to a value which triggers a change in cell B1 (a variable), can I use this to fire a sheet change macro ????
Wish to trigger a macro on sheet change based on every cell in column C, is this even possible ???
Or, is a change in a variable (C1) for example, the same as that of a DIRECT user keyboard input for example ???
Code:
Private Sub Worksheet_Change(ByVal Target As Range) Dim c As Range
If Not Application.Intersect(Target, Columns(3)) Is Nothing Then
Application.EnableEvents = False
For Each c In Target
[Code]...
View 7 Replies
View Related
Jul 2, 2013
I am using the...
Private Sub Workbook_BeforeClose(Cancel As Boolean)
... to capture when a user is about to close a workbook. I then give them a message: "Are you sure you want to exit? Changes you made since you last saved will be lost."
However, to make it neater, is there a way to only trigger the macro if they have made changes since the last save? In other words, if they have not made any changes since the last save, the message will not be displayed, since it is irrelevant.
View 2 Replies
View Related
Dec 6, 2013
Colouring calendar entries based on a date match... VBA to colour a cell on each line based on date match
The code works fine if you change the date in the cell and press enter however my date changes are triggered via a Vlookup which the code doesn't recognise has changed so doesn't trigger the macro.
Is there any way to amend the VBA code shown below so that it triggers the macro when dates are changed in column I via Vlookup?
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("I:I")) Is Nothing Then Exit Sub
Application.ScreenUpdating = False
Target.EntireRow.Interior.ColorIndex = xlNone
[Code] ......
View 3 Replies
View Related
Sep 3, 2007
Im trying to do a macro that will move data from a number of sheets based on a flag in column W on each sheet.
Basically if the flag in column W is "YES" then i want it to copy the whole row and append it (if thats possible?) into the sheet 'Journal'
I have attached a cut down version with only 3 sheets (one of which is the 'Journal' sheet) and only a few rows on each sheet.
View 10 Replies
View Related
Apr 24, 2012
I have data in a single Excel worksheet, single tab, columns A:C.
I want to move that data into Word.
The format in Word:
Contents of A1
Contents of B1
Contents of C1
Blank Line
Contents of A2
Contents of B2
Contents of C2
Blank Line
etc, etc, etc, etc....for all rows in Excel.
View 9 Replies
View Related
Oct 29, 2013
My data is now 500+ lines long but the button is on row 1. I have to get back to the top to click it. Can I auto move the button down with my data. Say to one line above my data. i.e. 499 and move as my data increases.
View 3 Replies
View Related
Jun 5, 2009
I have sheet 2 with a table with data in A2 thru X500, A1 thru X1 are my headers, A1 data is either Forecast or Sold, B1 data is Month, C1 is Value. I first need to Filter the data by Forecast, then by a specific month then by the value in decending order (keeping in line the data thru x which are headers I don't need to sort by). Next I need to take the 1st 10 lines by a specific month; A thru X and copy it onto a defined section on Sheet 1.
I then need to do this for the 2 more times for the 2 proceeding months. So If we start with Jan, I need the macro to do Feb and march as well.
The end result is that I have Sheet 1 with 3 sections on it each section is 10 lines and the resulting data is my top 10 forecasted deals for Jan, Feb, March. The macro must be able to do this for each month, so if June is chosen the 3 months are june, july and Aug.
View 9 Replies
View Related
Jul 22, 2009
Is it possible to have a macro compare two wokrsheets and move the totals from one sheet to the other worksheet.
Here are the worksheets: ....
View 9 Replies
View Related
Jul 26, 2014
I'm using macros to apply some complex sorting criteria. It is also applying some cell formatting specific to the sort criteria being applied.
At the start of each macro, I'm resetting all cell formatting to remove any formerly applied formatting that is not correct for the new sort criteria. Basic stuff.... works fine.
Now I need to ensure all formatting created by any macro-generated sort gets removed if a user applies a sort using any sort function from the Ribbon. (Reset all formatting prior to any 'manually applied' sort).
I can create the macro to reset the formatting, just not sure how to trigger it upon user action.
Is it possible to trigger a short macro to reset cell formatting when a user applies a sort using the Data>Sort, Data>Sort Ascending, or Data>Sort Descending commands from the Ribbon?
View 9 Replies
View Related
Dec 19, 2013
I've been using the record macro function to accomplish a lot of my formatting tasks for my work reports.
I'm running into a snag that I'm not sure how to fix. Essentially I want the program to recognized the term "Grand Total" and the cell to the right of it. Then I want those two cells to be moved to the far left.
The # of rows will continuously change but he column shouldn't change.
I've tried naming the cell selection to have it moved but I can't seem to make it work.
When I use the record macro function and do a CTRL F search for "grand total", excel doesn't seem to recognize that I want that cell and the cell to the right to be the ones to move. Instead, whatever row of cells I create the macro with, it wants to duplicate the move with the same exact cell.
View 2 Replies
View Related
