I am trying to used match function in the code but I am getting the following error:
Run time error '1004'
Unable to get the match property of the worksheet-function class
Here is the
Few hours ago, I wrote a simple procedure in order to get an average of a range of 10 cells (A1:A10). Within the code, I typed these following lines:
View 4 Replies View RelatedI created several macros objects to do simple hide columns, filter on, filter off, etc. type functions, using the Tools / Record Macro feature. Then discovered they won't work in a protected worksheet. Is there a way around this situation, other than turning protection off? Here's an example of the code for one of them, although I get the error or every attempt to perform a macro once the sheet is protected:
View 4 Replies View Relatedwhy i get this error on
myTimeToCheck = (cHour & "." & cMinute)
myColCheck = Application.WorksheetFunction.Match(myTimeToCheck, Worksheets("Sheet3").Range("A2:A87"), 0)
MsgBox (myColCheck)
it says "Unable to get the Match property of the WorksheetFunction class"
myColCheck contains 17.50 and i have 17.50 in the column A
bool = IsError(Application.WorksheetFunction.Match(ws1.Range("D" & i) & ws1.Range("G" & i) & ws1.Range("H" & i), ws2.Range("A3:A" & LR2) & ws2.Range("B3:B" & LR2) & ws2.Range("C3:C" & LR2), 0) > 0)
I am wanting to return a boolean result for if a multi-condition match is found. In pseudocode, I want to basically determine if the value in Column D, G, and H on worksheet 1 for a given row is repeated in Columns A, B, and C on worksheet 2 in any row. I have all variables properly dimmed.
the if stattement works perfectly and does exactly what i want except when it comes to the else part. if there is no error the statements are run perfectly but if there is an error (in this case the error is generated when a match cannot be found in the spreadsheet) the else statement doesnt kick in and post the msgbox.
the code just crashes. and returns an error 1004 on the line i have highlighted in yellow
res = WorksheetFunction.Match(invvar, Columns(1), 0)
If Not IsError(res) Then
Me.txtClientID.Value = ws13. Cells(res, 7)
Me.txtNumber.Value = ws13.Cells(res, 7)
Me.txtDate.Value = ws13.Cells(res, 8)
'save client id as a variable
'Print to invoice------------------------------------------------------------------.....................
I have a sheet that will force user to enable macro before revealing the sheets and enabling them to key in data. But because I need to protect the workbook from user deleting sheets and also having some locked cells. I got the run-time error 1004 unable to set visual property of worksheet class
View 1 Replies View Relatedthe problem I'm having is that when trying to copy the value of cell A2 and paste it in cell A4 with (INSERT with the second button of the sheet). this give me the error RUN TIME ERROR '1004 '.
View 7 Replies View Relatedhaving a nightmare with a pivottable in VBA. I cannot give it a dynamic datasource. Surely i must be coding this wrong.
it breaks on setting the range for PTRange with the error
Run Time Error '1004'
application-defined or object-defined error
Im almost finished my first code where the basic idea was to make activecell.name=activecell.value in the first column for the first 3 sheets. After messing with it i figured i couldnt have spaces in the cell name...then i learned i couldnt have random '()-'/ either. So i have the code formatted to do that and then its supposed to call to rename everything as well. but after the 1 sheets column is renamed the 2nd sheet gets error 1004 when range("A3").select is hit. What gives?
This is what ill be using the code on
[URL]
Here is the code
Code:
Sub RemoveChars()
' Works through first 3 sheets '
Sheets(1).Select
[Code]....
I am receiving the error:
Run-time error 1004 Application-defined or object-defined error.
It is occuring on the line of
Selection.QueryTable.Refresh BackgroundQuery:=False.
I am using SQL '05, Excel '03, and VB 6.3. I am trying to run a SQL stored procedure into Excel. So far all of my VB code seems to be running fine.
I am using the below code to select some spreadsheets under a folder, open them, select the entire font, change it to Arial and close the file. I am passing the file names from Column A and calling the below procedure in a loop. Everything works fine except the below problem.
If the file name I passed doesn't exist or the file is not accessable, I am getting an error message "File cannot be accessed. The file may be read only......" with two options "Retry" and "Cancel". When I click Cancel , it takes me to my code and stops at the line marked in red with Run-Time error '1004', Method 'Open' of Object 'Workbooks' failed. When the above error occurs , I need to just pass the value "ERROR" to ErrMsg filed and proceed further with the next file name.
Sub ChangeFont(FileName As String)
Dim objXL, objWb, objR ' Excel object variables
Dim Title, Text, tmp, i, j, file, name
Dim strPathToSaveTo As String
Dim strFileName As String
Dim wkb As Workbook
Dim wkb2Print As Workbook
strFileName = FileName
Application. ScreenUpdating = False
Set wkb2Print = Workbooks.Open(strFileName)
Cells.Select
With Selection.Font
.name = "Arial" .............
I have 4 command buttons (A-D) so that the users can update after inputting new or revised Data.
My problem is that if updated in order, button D Macro below stops at the first "Selection.AutoFilter..." as if it cannot turn on the Auto Filter.
It will run if I manually set the AutoFilter on the sheet.
I think, and as I am completely new to this please feel free to correct me, the reason that it stops is that on the Button B is a "AdvancedFilter" Macro.
I have a piece of VB code that works perfectly on my pc. The spreadsheet has been emailed to a partner (different company) and the code no longer works and they get the run-time error.
Private Sub cmdPrintandsave_Click()
Dim Company As String
Dim irow As Long
Dim MyDate
MyDate = Date
Dim wsD As Worksheet
Dim wsD1 As Worksheet
Set wsD = Worksheets("AppBDataSheet")
Set wsD1 = Worksheets("AppBPrintable")
Company = Application.OrganizationName
Application.ScreenUpdating = False................
I have inherited a spreadsheet and code that I don't understand much about. I have code
Range("B4").Select
ActiveSheet.PivotTables("Kh07Pivot").PivotFields("Specialty").Subtotals = Array(False, _
False, False, False, False, False, False, False, False, False, False, False, _
False, False, False, False, False, False, False, False, False, False, False, _
False, False, False, False, False, False, False)
which error (run time 1004) and says 'unable to set the SubTotals property of the PivotField class'. If I make the number of False's equal to 12, then it doesn't error. However I don't know whether it is having an adverse effect on the data?
Every time I run it I get a Run Time Error Message 1004 when trying to custome sort on D4.
Rng2.Select
With Selection
.Validation.Delete
.Sort Key1:=Range("A4"), Order1:=xlAscending, Header:=xlYes
.Sort Key1:=Range("D4"), Order1:=xlAscending, Header:=xlYes, _
OrderCustom:="L,M,H,Contract", DataOption:=xlSortNormal
End With
Range(Cells(1, 1), Cells(257, 257)).Select
This gives the Run-time error '1004'
I searched these forums for any old posts to work around this but did not find any threads. If anybody knows a good thread about this, I would be greatful.
Basically I run some code to generate Startcolumn, StartRow, EndColumn, EndRow. If there is a limitation of 256, the code is basically useless. I don't know of a way to use the A1 range method whilst using the Range("A1:....")
I have been working on the following worksheet, which has A3-Z27 cells right now and will grow/shrink with time. The spreadsheet shown below is just a portion of the entire worksheet. My vbscript is below the worksheet. I have two worksheets PL Dbase and Waiting List. I am copying columns B thru G from Waiting List if Column J is = to "Yes". To the next available row in worksheet PL Dbase columns B thru G...These columns have the same headings on both worksheets. I am getting the following error, when I click the button I assigned the macro to: Run-Time Error 1004 Copy Method of Range Class Failed.
Waiting List .....
Sub paste()
' paste Macro
' Macro recorded 2/20/2009 by lawryad
Range("A" & Rows.Count).End(xlUp).Offset(1).Select
ActiveSheet.paste
ActiveSheet.paste
Application.CutCopyMode = False
ActiveSheet.Range("p1").Copy
ActiveSheet.Range("a1").Select
End Sub
Now everything works good with this code unless there is nothing copied to paste. In that case it will go to a "run-time error'1004' " I would like instead for a msg box to appear saying "You must copy required data first"
I want to paste data from a table without the header row from one workbook (Test1) into another (Test2), from Test2. Test1 is closed before this operation starts. I'm using the following
Sub Macro2()
Dim myTable As Range
Set myTable = Range("A1").CurrentRegion
Workbooks.Open "C:ExcelTest1"
myTable.Offset(1).Resize(myTable.Rows.Count - 1).Select
Selection.Copy
Workbooks("Test2").Activate
ActiveSheet.Range("A1").Select
ActiveSheet.Paste
End Sub
When I have both workbooks open, comment out the line that opens Test1 and step through the code, it works fine but when I close workbook Test1, and run the macro, it generates the following error message: Run-time error 1004 Application defined or object defined error. When I click 'Debug' it has highlighted the row that has the offset instruction so there is no trouble with opening the workbook Test1.
im having problems calling the hlookup function in vba. Here is the code im using. I get run time error '1004'. Ive tried both setting the range, and manually inputting it. The User Defined Function takes no inputs, but is designed to get the value based on the relative position of the cell in the spreadsheet.
Option Explicit
Option Base 1
Function lastrow()
Sheets("template").Select
Range("A65536").Select
Selection.End(xlUp).Select
lastrow = ActiveCell.Row
End Function
Function summary1()...............
I included a couple screen prints showing that the form exists, and that it is not misspelled in the code. What should I look for?
View 4 Replies View RelatedI have a vlookup table with will define the Job description based on the job number & cost code. The function is working fine but the problem come when i try to convert it into macro.
View 10 Replies View RelatedI ran my macro on a spreadsheet and it was fine.
But when I ran it from another spreadsheet I received the below error.
i.e. I placed the macro in book1.xls & from there open book2.xls.
ERROR:
HTML Run-time error '1004':
Application-defined or object-defined error
The error pops up when the macro reach the line "Rows ("3:3").select".
Is there a setting within excel that could cause a user to get a run-time error 1004? I have a workbook with a macro that adds additional sheets to the workbook when a button is clicked. The thing works fine on my machine and 3 or 4 other machines that I have had guys test it out, but I have a user that it will not work for. He is at a location about 3 hours away so I cant see exactly what he is doing, but he says after he clicks the button he gets a run-time error 1004 that says "Unable to set the PrintQuality property of the Page Setup class". I'm thinking that it is a setting within excel?
View 5 Replies View RelatedI cant get this code to run more than one time and when it does run it doesnt reset the password protection back on and it fails to complete all instructions.
I get a Run time error '1004'.
Unable to get the CheckBoxes property of the worksheet class
I am getting a run time error 1004 when i am running this macro. I got this macro to my earlier thread. As i am a beginner in a macro, I am unable to identify the problem. I have attached the workbook for the same
View 5 Replies View RelatedI have a macro, operating in my excel document. It works and does it's function. The only problem is every time this macro is running I get the run time error 1004, Method 'SaveAs' of object '_Workbook' failed. After clicking End in the error window it opens up a newly created sheet that I need. I don't need to save the file in the desktop, I need it just to open up like it does right now.
View 5 Replies View RelatedRun time error 1004 when adding rows. I have the following code, called from a Userform:
View 4 Replies View RelatedI have a Access database as a frontend sending data via transferspreadsheet to Excel. All works well in the A2k and Excel 2k in which it was built. I need to distribute to other users and some have Office 2003 which has caused some problems with Object Libraries but I have made a modified XL2003 version to load on those systems. However, I get a Run-time error 1004, "Application defined or Object defined Error" and the debugger stops on the following line of code that should be underlined ....
View 9 Replies View Related
