Range("A10").Select
ActiveCell.FormulaR1C1 = "write text"
How would the code be written so it does not actually select cell range A10? I have seen this somewhere where text is written but without actualy recording "clicking cell range".
I m trying to write a macro which could take the text from a single column row T2 to row T313 and write it to a .txt file. Have the .txt file name created by the text in T4 or I could also put the text to name the file in T1 if you think it would be easier.
Then carry on to the next named sheet and produce another .txt file in exactly the same way until all 15 sheets have been completed. It would also be helpful if prior to starting to write each text files, it could test for any text in cell A2 of the sheet. The first empty A2 cell of a sheet would determine the end of the run, if it was prior to sheet 15 being reached.
What if you have text that are hyperlinked to a txt file and you want to read from it and copy it into excel. What can I do then. Here is what I have been working on so far:
Sub GoToHyperLink()
Dim cell As Range
Dim link As Hyperlink
Dim Textline As String
Range("C2:C13").Select
For Each cell In Selection
Selection.Hyperlinks(1).Follow NewWindow:=False
I can not get it to write it to excel.
I'm trying to learn VBA programming (I started some years ago already, but felt it was a bit too difficult for me) and I would like to ask two (perhaps very basic) questions:
1 - Can someone give me a code which does the following : In A1 I have a string : "This is a test." I want it in rewritten in column C1-4 as follows :
C1 This
C2 is
C3 a
C4 test.
2 - A code which does the following : In A1 I have a word : "Testing"
I want it this word as split up in 1 character/cell as follows :
C1 T
C2 e
C3 s
C4 t
C5 i
C6 n
C7 g
I have verified that there is data in the worksheet...but while the text file is created and properly closed, nothing is written to it.
Sub ScoresToDeko() 'writes a text file
Dim Scores As String
Dim CRLF As String
Dim count As Integer
Scores = ""
CRLF = Chr$(13) & Chr$(10)
Are there any examples, instead of having MsgBox, but have a log file created ?
So instead of MsgBox, it might be MsgLog
Is there such a thing in VBA ?
I have a macro that reads the content of the columns in an excel file and writes the content of each cell in the column to a row in a text file. Here is the code I am using:
Public fso As New FileSystemObject
Dim f As Folder
Dim i As Long
Dim j As Long
Dim rng As Range
Dim cell As Range
' Generate a set of text files from this excel file
Sub ExcelToText()
'Select the used range of the worksheet
Set rng = ActiveSheet.UsedRange
Set rng = rng.Offset(3, 0)
For i = 1 To rng.Columns.Count
CreateTextFile rng.Columns(i), i
Next i
End Sub
' create text file
Private Sub CreateTextFile(rng As Range, i As Long)
Dim tstream As TextStream
Dim oCell As Range
Dim j As Integer
Dim title As String
Dim filname$
Now my problem is the following: certain rows are merged in the first column of my excel file, such as the following:
050partyId partyIdScheme
member memberScheme
In this case, my macro writes 50 in the first text file, then partyIdmember in the second file and partyIdSchemememberScheme in the third file.
What I want is a white space between the words in my text file, for example: partyId partyIdScheme. How do I modify my macro to do that?
I'm getting an object required error in excel, but don't really understand.
rivate Sub CommandButton1_Click()
free_number = FreeFile()
Filename = app.Path & "/file_write_output.txt"
StringToSave = Cells(1, 1).Value
Open Filename For Output As free_number
Write #free_number, StringToSave
Print #free_number, StringToSave
Close #free_number
End Sub
I have just started VBA for the first time in Excel 2007. I have spent 2-3 hours trying to write text to a cell and I do not understand why it is not working. I have reduced the operation to the simplest form that I can find, now using the following
View 3 Replies View RelatedI found this thread ,
http://www.excelforum.com/excel-prog...in-a-cell.html
on the forum site which involves
saving a file by value in a cell.
I want to change the code so that it saves that name by
a cell value + "_BOM"
I have a userform with a textbox that has numbers in it, but when I write them to Excel they are put in the column as text, not as numbers.
[/CODE]Cells(erow,6).Value = txtbox_Amount[CODE]
How can I force it to write the information as numbers?
P.S. My computer won't let me paste into these posts, even when it asks me to allow access to my clipboard. What setting can I change so I can paste my code instead of typing it.
I am trying to treat this code with the column range as a variable. I don't know the proper way to write the code. Instead of this
lRowStart = Range("b1").End(xlDown).Row
I am trying something like this
g = 0
lRangeStart = Range(Columns(2 + g)).End(xlDown).Row
g = g +1
The problem with the first code is that it stays with the column "b1", but I would like to have my code move from column to column.
I am trying to write/print a cell value in a text document but am having problems (I know what the problem IS, just can't find a solution).
Right, so my code is as follows
I have created a sheet which gets populated by information but have left out the top row. I want to use the tope row to enter my header fields but was looking to see if there a more effcicent way of doing this.
I am using the following code below but was wondering if there was a way using arrays as variants or ranges to do it more efficiently.
I have a userform with a checkbox. If the box is checked, I would likke to write "Option One" to cell A1 in Sheet1 when the Close button is clicked. I can't get the code correct for this. The workbook is attached.
View 2 Replies View RelatedI have a excel sheet with rows and columns. I want to use these values to write a text file.
Code:
PR
DTP
DTP
DTB
DTB
E618F0310AFD44CB9881B0E692B68874
E618F0310AFD44CB9881B0E692B68874
063D64761DFC46F485CE86F4F720A1B1
063D64761DFC46F485CE86F4F720A1B1
[Code] .......
Output:
HTML Code:
Project n 1
E618F0310AFD44CB9881B0E692B68874
AA
Project n 1
E618F0310AFD44CB9881B0E692B68874
BB
.
.
.
and so on, until all rows and columns has been written
I need help for reading data from text files and saving it under different columns in the excel file using vba macro.
For example: I have many text files in the following format ....
Attached is the mock excel spreadsheet. I want to read "sam" from the lookup column's long text "sam is good" and then write "4" in the next column. Similarly read "white" from the long text "white is tired" and write "1". And so on,,,,, For more criteria, see box highlighted in yellow,,,,I used VLOOKUP but what am able to make it work only when there is one word "sam" in the lookup column. It returns #NA when the text is "sam is good". It should write nothing if none of the criteria is met and should keep doing until the last cell in the lookup column.
View 3 Replies View RelatedI'm using a code to copy text from a word doc into a spreadsheet. It does it all right, but when it comes to saving, it does not save the open worksheet and prompts me to save as a copy. If I do so, nothing is changed in the original file and the copy file has the information copied from the word file.
This is the code I'm using to write and save the spreadsheet.
...
(VBA in WORD)
Set wdApp = Excel.Application
Workbooks.Open FileName:="C:UsersljsDocumentsword2excel.xls"
Workbooks("word2excel.xls").Activate
Worksheets("Plan1").Activate
Worksheets("Plan1").Range("A2").Value = DOCname
Worksheets("Plan1").Range("B2").Value = CarNo
Worksheets("Plan1").Range("C2").Value = WordNo
ActiveWorkbook.Save
ActiveWorkbook.Close
...
In VBA, is it possible to write to a text file, on 1 single line (without carriage return or line feed) the values of a dynamic array? For instance, I have the array:
Dim my(n) As Double 'n is changeable
my(0) = 0
my(1) = 1
my(2) = 2
.....
I want to write to a text file, like this: Write #filename, my(0), my(1), my(2) '..... until my(n) but n is changing
I want them on 1 line, because I use the other direction (up - down) for other things).
I have a spreadsheet. In this sheet the data is added daily so one column is increased everyday. The rows may also be increased. What I am trying to do is to sum the data in each row for a range of first cell in the row to the last non empty cell in that row and this has to be done for all the rows. So I thought the for loop would be useful for such requirement and I tried to write the following code. But unable to write the sum formula in the last empty cell in a row and I get the value error. The code is as follows.....
Sub sum_on_LastEmptyCell()
'find the last empty row in column A
lrow = ThisWorkbook.Sheets("sheet1").Cells(Rows.Count, 1).End(xlUp).Row + 1
'find the last empty column in a row
[Code] ........
Though one of my friend told that it can be done with "with and end with block but I am not aware of with and end with block.
It would be better if you tell me that how can I put the sum formula in my code. How can I use variables which return the row number and the column number in the sum range within the For loop because I want to put If Else condition for the calculations within the For loop i.e. if certain condition is true then I want this calculation to take place otherwise do something else. Moreover it will be easier for me to understand. Because I can use different formula based on different cells as well. Is there any way to do this?
I am trying to write the contents of a worksheet to a notepad file. Also, the worksheet has some hidden columns.
To initialize some cells/ranges, I am copying a given range and pasting it to another given range using the. Copy and .PaseSpecial methods. However, it would seem that both methods actually select the range(s) for the operations, i.e. the given ranges(s) are activated/selected thus changing the focus on the spreadsheet. I would like to perform both operations without actually selecting the given ranges.
View 5 Replies View RelatedI am receiving a 'subscript out of range' error on the lines of code below.
I would note that all variables are declared and all seem meaningful as regards what you would expect at that point.
Below is a snippet from the immediate window which indicates what the values are:
completecashname C:CashDevelopmentMyFolderoutputCASH042706.xls
cashsheetname Formatted Sheet
cashcurrcolumn A
cashfirstrow 2
cashlastrow 876
Also the workbooks are both closed at this point (but it makes no difference)
Set CashCopy = Workbooks(CompleteCashName).Sheets(CashSheetName). _
Range(CashCurrColumn & Cashfirstrow & ":K" & Cashlastrow).Value
Set PelPaste = Workbooks(completepelname).Sheets(PELSheetName). _
Range((PELCurrColumn & PELlastrow)).Value
Im using excel 2010 As it's 60 times quicker I was trying to speed up my code and replace all loops by putting the value into an array, and then transfer the array to the worksheet
It seems to be straightforward for math calculations like in this example:
[URL]
But no luck with the one below. I was trying to test it on a simple loop which replaces two types of string into the 3rd one:
Code:
Dim lastrow, lastrow2, i As Long
With Worksheets("KPI5")
lastrow2 = .Range("N" & Rows.Count).End(xlUp).Row
.Range("T7:T" & lastrow2).Value = .Range("F7:F" & lastrow2).Value
For i = 8 To lastrow2
If .Range("T" & i).Value = "Modification" Then
[code]....
What i'm trying to do is select a range based on the date which happens to be in the first column of the range.
For example, I have a column (A) that contains dates and column (B) that contains names.
Its easy enough to select the entire range using
Range("A1:B4").Select
I need someting that will analyse column A and conditionally selct the range based on the date in column A (ie. it will only select the rows where column A has todays date).
Quick question about copying the contentsof one text box to another. As we all know all you need is
Textbox1.copy
Anotherform.Textbox2.paste
As we all know to copy something one must highlight/Select it first, My question is, what command in VBA selects or highlights the text in a box for copy?
So in my code I have two set ranges and want to select from one set range to another. The code I have now does not work because I cannot select Range("POBRF:PO"). This is the code.
[CODE]
ARow = Range("A" & Rows.Count).End(xlUp).Row
Set POBRF = Range("A1:A" & ARow)
BRow = Range("I" & Rows.Count).End(xlUp).Row
Set PO = Range("I1:I" & BRow)
Range("POBRF:PO").Select
[CODE/]
I am having trouble selecting a range in my data to copy to another worksheet. I have declared two variables (startcell and endcell), as seen below, as strings:
Cells.Find(What:=startdate, After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False).Activate
startcell = ActiveCell.Address
Cells.Find(What:=enddate, After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False).Activate
endcell = ActiveCell.Address
After this I would like VBA to copy all the variables in a range that is bounded by startcell and endcell. Here is what my code is currently for selecting the range:
Range("A2:" & endcell).Select
Instead of A2, I would like to select startcell, but I cannot figure out how. Currently I can get VBA to recognise endcell. For example, using the formula above I can copy the range from A2 to endcell. However, when I try and use startcell as the beginning of the range (in place of A2) the code does not work.
I have two tables in two different worksheets. In the first table, rows get deleted if the value in column 'S' (the first row to the right of the table) is not '1', and columns get deleted if the value in row '2' (third row above the table) is not '1'. In the second table, the number of columns stays always the same but rows get deleted if the value in column 'N' (first column to the right of the table) is not '1'.
After the rows and columns are deleted the tables get pasted in a ppt presentation.
Now the problem: I am a beginner in VBA and up til now I am only able to define a certain Range, e.g. ("A5:M17"), to be copied and pasted into ppt. But since the tables will sometimes be bigger than other times depending if rows/columns are deleted, I would rather define a dynamic Range. The top left cell of both tabels to be copied is always 'A5' but the bottom right cell changes.
