Selecting A Range Based On Date Within That Range
What i'm trying to do is select a range based on the date which happens to be in the first column of the range.
For example, I have a column (A) that contains dates and column (B) that contains names.
Its easy enough to select the entire range using
Range("A1:B4").Select
I need someting that will analyse column A and conditionally selct the range based on the date in column A (ie. it will only select the rows where column A has todays date).
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Selecting Range Based On Date
On sheet 1 in cell A2 I have a date (2/22/07). On sheet 2 I have 4 columns of data...column A has consecutive dates. I am looking for a code that will select the range that begins with the week beginning date of the date that was inputted on sheet 1 and the week ending date. For example, the code will select the range 2/19/07 to 2/25/07 (A20:D26).
View Replies!
View Related
Selecting Data Over A Date Range
I have 2 worksheets where I need to transfer a certain amount of data from one to another depending on dates. Sheet ‘A’, is the main data source. Col A holds all 365 dates from 1 Jan to 31 Dec(starting at A2), and the subsequent data for each day is held in cols B to P. Sheet ‘B’ is the destination where the user will specify a key date in cell A3, then in A4 to A32, formulae populate the next 29 dates (ie so there is a continuous run of 30 days). What I need to do, is to identify the same 30 day range from sheet B on sheet A, then to copy the data in Cols B to P for that range back onto sheet B (pasting in at D3)
View Replies!
View Related
Selecting A Range Based On The Value Of One Cell
I have rows of data, and the first number corresponds to the number of subsequent numbers that are relevant. I want to paste that number of values into a second spreadsheet. How do I do this? e.g. A1 B1.... 6 21 15 14 32 85 14 16 21 25 26 24 In this case I want to copy the 2nd-7th number, as the 6 tels me I want the next 6.
View Replies!
View Related
Copy/Paste Range(s) Without Activating/selecting Range(s)
To initialize some cells/ranges, I am copying a given range and pasting it to another given range using the. Copy and .PaseSpecial methods. However, it would seem that both methods actually select the range(s) for the operations, i.e. the given ranges(s) are activated/selected thus changing the focus on the spreadsheet. I would like to perform both operations without actually selecting the given ranges.
View Replies!
View Related
Subscript Out Of Range When Selecting Range In Closed Worksheet
I am receiving a 'subscript out of range' error on the lines of code below. I would note that all variables are declared and all seem meaningful as regards what you would expect at that point. Below is a snippet from the immediate window which indicates what the values are: completecashname C:CashDevelopmentMyFolderoutputCASH042706.xls cashsheetname Formatted Sheet cashcurrcolumn A cashfirstrow 2 cashlastrow 876 Also the workbooks are both closed at this point (but it makes no difference) Set CashCopy = Workbooks(CompleteCashName).Sheets(CashSheetName). _ Range(CashCurrColumn & Cashfirstrow & ":K" & Cashlastrow).Value Set PelPaste = Workbooks(completepelname).Sheets(PELSheetName). _ Range((PELCurrColumn & PELlastrow)).Value
View Replies!
View Related
Compare Dates To Date Range & Return Date Based On Outcome
I need to compare three cells of random dates shown in Column E, F,& G with Row's H5:AK5, H7:AK7, H9:AK7 (the Dates to these rows is Static on row H3:AK3.) EX: ROW 5 has Start Date, End Date (1) and End Date (2). Compare Cell H3 between Start Date & End Date (1). If H3 falls between or equal to Start and End Date(1) then highlight cell H5. Proceed till AK3 (higlighting only the cells H5:AK5). Then compare cell H3 between or equal to End Date (1) and End Date (2) (higlighting only the cells H5:AK5). Then do the same for ROW 7 and ROW 9. To make things a bit more difficult I need to have " WK#" in Row 14 (these WK# is on another tab called "Task" of the workbook) needs to be displayed in Row's H4:AK4, H6:AK6, & H8:AK8. EX: Compare Date in D15 between or equal to Start Date & End Date (1) then display Wk# in D14 in H4. Continue till all dates in D15:Z15 are compared to Start Date & End Date (1) and WK#'s in Row D14:Z14 are inputted if applicable in Row H4:AK4, H6:AK6, H8:AK8. I hope this is not confusing. I can't seem to use the upload option so here is alink to download a jpg of the sheet
View Replies!
View Related
Fill Table Based On Another Within Date Range & Cut Off Date
I have an 'existing results table' as per my attached sample. I have had help previously from this forum to create lists of 'sold' stock within date ranges (tax year periods) and these are represented as 'sold list' in my attached sample. I now need to create a list of 'unsold stock' for each annual tax year end date; i.e. populate my table with items that have been created before the end of the date range and that have not been sold by the end of the date range. Please can someone show me the formula on my attached sample? Please see my example in red. I am working with Excel07 however my attached sample is in Excel03 because I couldn't upload an XLSX file.
View Replies!
View Related
Selecting A Range And Then Summing That Range
I am trying to select a range of numbers based on an active cell. I then want to sum those numbers and have that total reported to a specific cell. For example: Say I have a column with a list of dates (Jan/04 thru July/06). I want the user to be able to click on any given field and have that field plus the 11 fields above it summed and reported. Any help? I came up with something like ActiveCell.Resize(12, 1).Select This only selects the data from the active cell and goes down...I need the opposite. I need it to select the 11 cells above the active cell (plus the active cell) and sum that data.
View Replies!
View Related
Avg Based On Date Range
I am diabetic and track my blood sugar on a spread sheet I created. Each month is a page named for the month and year. ( ie: may07, June07 etc ) The last page is my averages page. I monitor averages from the begining as well as several 'last 3 month' statistics. At this time I have to go in each month and change the months on the '3 month averages' formulas then add a month to the 'over all' formula. I want to use a formula that will simply look at the last 3 months without having to manually change the months as well as the 'overall' formula automatically calculating "all" months without adding a new month every month. And last but not least, I have some sub-total boxes giving a div by zero error with blank cells. What am I doing wrong? Not all boxes do this even though the code is copied and pasted so they all 'appear' identical. Rather than try to paste my code here you can see my spreadsheet at [url]
View Replies!
View Related
Countif Based On A Date Range
I have 2 columns, one containing a piece of data and one containing dates. I want to count how many times the data is in the first column, based on a specific date range in the 2nd column. I have attached a sample SSF with a better explanation inside it.
View Replies!
View Related
Count Based On Date Range
I have one worksheet with 2 columns: A - Dates, B - User IDs. In another worksheet I would like to have two columns: A - User IDs and B - Count. The count in Worksheet2, column B would be a count of how many instances the user ID in Worksheet1 appears before or on a certain date. Example:..................
View Replies!
View Related
Average Based On Date Range
Having trouble working out a macro for this... Column B with dates and column C with values. I'd like to make another column with the cell value averages based on the date. In essence, calculating daily averages. In turn I will later be adapting it to go through the all sheets in all workbooks.
View Replies!
View Related
Conditional Format Range Based On Date
I have a monthly calender, with each month on its own sheet. I have a sheet named Holidays, which list the holidays. I have been able to use conditional format and highlight the dates in the months the holidays fall on, but I would like to highlight a range of cells below the date on monthly sheet. I have attached a sample of what I have and would like to achieve. I am not much good at using VBA, but would not be against using it either.
View Replies!
View Related
Maximum And Minimum Formulas Based On Date Range
I have a spreadsheet with two columns - column A contains dates and column B has the corresponding data (always numbers). The data is not uniform (i.e there may be lots of entries in any given day and none over the next few). The data is always sorted in chronological order. I want to set up a summary table to show the min, mean, median, max for each week. I have set up an array to calculate the mean, but I am having trouble working out a good way of gettting the others short of having a set of columns that manually define each cell...for instance =min(b3:b27) or =min(b28:b30).
View Replies!
View Related
Pull Data Out Of A Closed File Based On A Date Range
I am trying to make Excel pull data out of a closed file based on a date range. The closed file is a log where people input data and enter the day they are doing it. I need to pull this data in my file and make it print into my worksheets so I can pass a report on to others with only the data they request from the log. The range would be for 7 days and would have to be able to choose a few columns off this report.
View Replies!
View Related
Copy Data Based On Date Range Put In By User For Report
I have looked through the forum and found pits and peices but can not put the puzzle together. Found the VBA code in my example from a earlier post but there was no final answer to the post. Trying to have the user put in a date range via command button. Fro mthis date range the data thats falls within that range is copied to a report sheet. Will also need to have all the old data from a earlier querry removed. Have attached example sheet.
View Replies!
View Related
Formula To Show A Date Range Based On The Amount Shown In Another Cell
Attached is a excel file that has a working formula for tracking cashier variances. I edited out names etc. I added a new cell called Track Back on the employee search sheet. What I want to do is only show variances for the amount of days back selected in the Track Back cell. For example if I select the last 30 days, only the last 30 days would show up below in the sheet. I am not sure if this is even possible based on the forumla that is already on the sheet. I couldn't figure out a way of doing it. But there are a lot of people on here much better with excel than me
View Replies!
View Related
Copy Rows To New Sheet Based On Date Range Selected On A Form
This spreadsheet must perform calculations for every line since new items are added every day, so VBA is probably better than copying formulas down every line of the spreadsheet: With the press of a button, I need to be able to select a range of dates and copy all lines within the range to a seperate sheet with the desired name under the same headings they currently reside under. I have included some modified code that is being used in another spreadsheet that was created for me, but I do not pretent to understand all of it and I no longer work with the creator of the spreadsheet. How do I use a button to open the form for date selections and entering the name of the new sheet, and then use the start button on the form to begin the matching and copying to a new sheet? If there is an easier way I am all for that too. Also, I need to keep a total of all items by month as well as a monthly and annual average of the Total Item Value on the FY09 tab. This will eventually produce another sheet when a button is pressed to submit as a report. I think part of this answer is in using the MONTH(serial_number) function but I can only get this to work for a single cell. I need to search the entire Distribution 'D' column, match all the months to the FY09 tab to the respective month, and calculate the totals and averages. I think SUMIF may also be needed as well but need the MONTH(serial_number)to work first. If there is a way to code all of this in VBA that would be fine as well. I have a pivot table on Sheet1 where I am trying to get the totals and averages described above but I am not sure it can do what I need. In column 'B' I need the total number of each item as well as the total number of all items. I tried various formats and adding the totals from the Totals tab but I have not figured it out.
View Replies!
View Related
Selecting A Certain Range That Changes
I have two tables in two different worksheets. In the first table, rows get deleted if the value in column 'S' (the first row to the right of the table) is not '1', and columns get deleted if the value in row '2' (third row above the table) is not '1'. In the second table, the number of columns stays always the same but rows get deleted if the value in column 'N' (first column to the right of the table) is not '1'. After the rows and columns are deleted the tables get pasted in a ppt presentation. Now the problem: I am a beginner in VBA and up til now I am only able to define a certain Range, e.g. ("A5:M17"), to be copied and pasted into ppt. But since the tables will sometimes be bigger than other times depending if rows/columns are deleted, I would rather define a dynamic Range. The top left cell of both tabels to be copied is always 'A5' but the bottom right cell changes.
View Replies!
View Related
VBA Code To Set Unknown Range Based On Current Date In 1 Column
i have a sheet for monitoring sickness. i have used a macro before which automatically selects a range and emails it to recipients when i press a button. what i would like to do is have excel automatically choose the range for me based on today's day. in the attached example i would like column "A" copied along with the 5 columns before today's date, today's date column and also the 5 columns after today's date. paste the lot into an email and send. (i have highlghted the parts i would like copied and pasted into an email based on today's date (21st july).
View Replies!
View Related
Selecting A Range Of Numbers
I'm trying to obtain a formula that allows me to select the last 20 numbers in a range of numbers that continue to increase weekly. i.e column a3-a3000 increases by one number every week. I need the formula to sum the lowest 10 numbers of the last 20. If there is 30 numbers from a13-a33 week one. I require the formula to pick up the 10 lowest from the last 20 (a13-a33). Week two the cell increases by on to a34. The formula would then have to pick up the lowest 10 from the last 20 (a14-a44) and so on.
View Replies!
View Related
Selecting A Range Using VBA
I am having trouble selecting a range in my data to copy to another worksheet. I have declared two variables (startcell and endcell), as seen below, as strings: Cells.Find(What:=startdate, After:=ActiveCell, LookIn:=xlFormulas, _ LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _ MatchCase:=False, SearchFormat:=False).Activate startcell = ActiveCell.Address Cells.Find(What:=enddate, After:=ActiveCell, LookIn:=xlFormulas, _ LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _ MatchCase:=False, SearchFormat:=False).Activate endcell = ActiveCell.Address After this I would like VBA to copy all the variables in a range that is bounded by startcell and endcell. Here is what my code is currently for selecting the range: Range("A2:" & endcell).Select Instead of A2, I would like to select startcell, but I cannot figure out how. Currently I can get VBA to recognise endcell. For example, using the formula above I can copy the range from A2 to endcell. However, when I try and use startcell as the beginning of the range (in place of A2) the code does not work.
View Replies!
View Related
Selecting Specific Value Within A Range
I have a spreadsheet with Employee details and each employee has a Indicator and a Score. I'm battling to get Excel to do a lookup on the Indicator, find the applicable Score Range, see if the individual's Score falls within the range and then inserts the relevant % into a cell in a specific row of each employee. If we did not have more than 2000 doing it manualy might have been an option. Also, the Percentages and Score Ranges in the matrix might change a couple of times....
View Replies!
View Related
Selecting Range Of Cells
I am trying to select a range of cells. The range I need to select starts in Cell A1. I need to select every row with data in column 1 up to the first row with no data. I then need to expand the range to all columns up the last column with data, including columns with blank cells. The problem with my code relates to the selection of columns. It is only selecting up to column F. Column G is empty, Column H has data, Columns I-J are empty, Columns K-R have data.
View Replies!
View Related
Selecting Generic Range
I'm trying to write a formatting macro that will insert a gray divider (row) into a blank line. I'm going to do this with a keyboard command, but I'm having a hard time selecting to column AJ. Obviously this command... Range(Selection, Selection.End(xlToRight)).Select ...takes you to the end of the page, but I don't need to go that far, just to column AJ.
View Replies!
View Related
Selecting A Discontinuous Range
I'm trying to select a discontinous range, lets say B2:B30 & D2:D30 and this works fine using the code below: Range("B2:B30,D2:D30").Select However if I use the code below, B2:D30 is selected including column C. Dim LastRow As Integer LastRow = Range("a65536").End(xlUp).row Range("B2:B" & LastRow, "D2:D" & LastRow).Select
View Replies!
View Related
Formula That Will Determine The Number Of Days That Fall In A Specific Month Based On A Date Range
I'm needing a formula that will determine the number of days that fall in a specific month based on a date range. For example, if I have a date range of 10/15/2009 to 01/13/2009, I need the formula to determine the number of days in each month within the range (October has 15 days in the date range; November has 30, December has 31, and January has 13.) I have a large spreadsheet that would be so much easier to manage with such a formula. Currently, my spreadsheet is setup as follows. I need the forumla automatically fill in the number of days under each month. Stard Date End Date Oct-09 Nov-09 Jan-10 Feb-10 10/15/2009 01/13/2009 I'm using Excel 2007.
View Replies!
View Related
Selecting A Range In Excel Macro
I have created the below macro to show the user (when he / she clicks on a button) how many days are left till the deadline day (taken from MS Project). Sub DaysLeft() Dim rng As Range Dim count As Integer Set rng = Sheets("Programme Reporting").[E2:E200] count = Application.Evaluate("NETWORKDAYS(Today(),E3)") Range("L3:L200").Select ActiveCell.Value = count End Sub The range I want to output the days to is L3:L200 that seems to be okay. I have an issue with trying and putting a range in the NETWORKDAYS area, if I try and put in E3:E200 (the range of dates) it fails, as does $E$3:$E$200. At the moment the above code does work but it only puts in the days for one of the entries (E3).
View Replies!
View Related
Selecting One Cell Copies Range
Question 1) Is there a way that whenever I select Cell B39 that it will copy cells B39:V39 ? From there I can manually paste that selection to where I need to. If this is possible, it would save the effort of having to select B39:V39 manually and clicking CTRL-C. I am gathering data and the copying and pasting is killing me. Question 2) Is it possible that when I click on Cell A9 that it can paste any data that I just copied from another worksheet to cells A9:D29? The size of the selection that I would copy is the same size as A9:D29 (4 columns & 29 rows). I have searched for a solution, but I am not having much luck since I am anaware of the proper terminology for these types of actions.
View Replies!
View Related
Selecting Cell Range Of Colours
Is it possible to select only cells of a certain colour, then change these cells to a different colour? example I want to make the dark grey columns a light green and the red columns a lets say yellow and the text black. Is this possible??
View Replies!
View Related
Selecting Only A Part Of A Merged Range
i have a merged cell which runs across a multiple columns (but a single row). i would like to insert a column in the middle of this merged cell, but whenever i click on the column header to insert a column, the entire merged range is selected. is there a way to change the excel setting to avoid this?
View Replies!
View Related
Selecting Range With Variable Length
I require vba code which will allow me to select a range of variable size. Starting from cell A2 use : Range(Selection, Selection.End(xlDown)).Select However then using the line below may not select the entire range as some columns may be empty Range(Selection, Selection.End(xlToRight)).Select
View Replies!
View Related
Selecting Non Sequenced Cells In A Range
I'm trying to use the SUM function with non sequenced cell but the Range or any other function won't allow me to activate the selecting cells if there are more then 41 cell, I wrote somthing like so: Sub Test() Dim str AS String Dim R AS Range str = "A1,A3 ...... ,A57" 'this is only an example, assum that there are _ more then 41 cells Set R = Range(str) 'Here is the Problem, I get a Runtime error 1004 _ Application-defined or object-defined error R.select End Sub But if the str input was a 41 or less Cells address string then it works
View Replies!
View Related
Selecting The Whole Column As Range In Macro
I am working on a VBA macro, using the following With wsSheet.Range("A:A") ReDim MyArray(1 To .Rows.Count, 1 To .Columns.Count) MyArray = wsSheet.Range("A:A") For i= 1 To .Rows.Count For j= 1 To .Columns.Count wsSheet.Cells(i, j+ .Offset(0, 3).Column) = MyArray(i, j) Next: Next I want to select alla values in column A, but when I specify the range as "A:A" the code results in an infinite loop! How can I come around this?
View Replies!
View Related
Selecting A Group In A Moving Range
I have a spreadsheet where I need to perform a calculation on the lowest 10 of the 20 most recent entries. Currently I am just deleting the oldest entry and putting in the new data but I now desire to keep all my data. How do I select the new range of 20 rows and then tell it to take the 10 lowest values to perform the calculation
View Replies!
View Related
Selecting Conditional Range To Copy
I have two columns of data (of varying length). The first column "A" has steadily increasing random values from about zero to 200. I would like to be able to automatically select/highlight the region with values between 50 and 100 as well the corresponding values in the adjacent "B" column.
View Replies!
View Related
Selecting A Range When Switching Between Workbooks
I select workbook 1, cell A4, then I select workbook 2, cell A4, but when I'm in workbook 2, it does not select cell A4. Am I doing something wrong here? See my code below. Sub CopyData() Dim i As Variant Workbooks("1_2007 Forecast (Ancillary).xls").Worksheets(1).Activate Cells.Range("a4").Activate Workbooks("1_2007 Forecast (LGBU).xls").Worksheets(1).Activate Cells.Range("a4").Activate End Sub
View Replies!
View Related
Selecting A Variable Range And Then Subtotaling It
I am trying to enter code into a Macro that will select a range and then put a subtotal at the bottom of the range. I have values in col D & E that I am multiplying together in column F. I then want the macro to select a range from F2 to the last Value in col F and then put a total in the next cell down (in col F). The range needs to be variable.
View Replies!
View Related
Selecting Range Up To Blank Row
I am having a few problems selecting a range. What I am trying to do is select a range where the number of columns stay the same, but the rows are variable; ranging from one row upwards. At the end of the rows, there is a blank row. I currently have;
View Replies!
View Related
Selecting A Range Using VBA Code
I have attached a spreadsheet...I'm trying to select Range A1:N16 using VBA code... Range(activecell,activecell.end(xltoright)).select Range(selection,selection.end(xldown)).select When I use this code is only gets A1:N6...: is there anyway to get it to select the range all the way to the end of the data. I tried CurrentRegion and some other stuff but can't get it to work.: The range may go upto line 500 or 3 I just never know.
View Replies!
View Related
|
TRACKER
