I have written a VBA program and using in Ms.Excel. The problem is when I try to write the VBA function through the function wizard it works but when I write the function in excel worksheet cell, it doesnt execute. I do not now the reason.
View 2 RepliesI'm wondering if an if then else function can be written for the problem that I'm having? Or is there a better way to accomplish this? I've detailed my problem within the example attached.
View 3 Replies View RelatedI have the following assignment to do, problem is I'm new to arrays and functions in VBA and nothing is working for me, i get errors no matter what i try, (for example i don't know how to feed the array to the function, and it won't let me write a range to an array)
5.A) Write a function that takes a 2D array of doubles, a single cell range, an optional cap and an optional floor.
B)Write the array on to the sheet with the single cell range parameter being the location of the top left of the array on the sheet. When writing the array to the sheet, for each value in the array where it is below the floor put the floor on the sheet, where the value is above the cap put the cap value on the sheet, otherwise display the original value. The input array should not be modified.
All code should be what you consider production quality.
Dim topleft As Range
array1 = Range("B8:C18").Value
'array1(1, 1) = 2
'array1(2, 1) = 3
'array1(1, 2) = 6
'array1(1, 3) = 9
'array1(2, 2) = 4
'array1(2, 3) = 5
if there is an Excel function out there that will copy over the contents of one cell into another by what is typed in another cell. Did that make sense?
Lets say that I have info in
(A1) John (B1) Smith (C1)X (D1)
Now I want to be able to copy over A1 & B1 to another part of the spreadsheet/workbook if I were to type the words "leave" into D1.
So basically it would look something like this...
(A1)John (B1)Smith (C1)X (D1)leave (want info to go here---->) (M4)John (N4)Smith (O4)currently on leave
And then have it automatically add the names below the one in M4-O4. so it would add names in M5-O5, M6-O6, etc
I have this spread sheet that has over 1000 names on it & it would help out alot if I could just use a function that could copy the information to another part of the spreadsheet or another workbook.
I know that I can use the filter, but I may want to have this stuff on another worksheet alltogether.
Also, if this is possible, is there a way that it can be automatically removed if I were to delete the word "leave" from the cell?
I'm trying to make a "weight-based" spreadsheet. I want to show a difference between numbers so if an item lost 5 lbs, there would be a "-5" and it would be in green font showing good.
For example, a box weighs 20 lbs and then drops down to 15 lbs. This would be a good result. So I would have 20 lbs in A4 and 15 lbs in A6 and I want to show the difference in A8. However, since I want the box to lose weight, I want it to show a negative value of "-5" in green font meaning it is good. And vice versa, I want it to show "+3" in red font if the box gained weight.
I can't really figure out how to get the signs working properly. I'm assuming to use an "if" function in where if the difference is a loss, show the negative sign and have it in green font. And if the difference is a gain, show the positive sign in red font.
how to write a custom made IFERROR function which works on Excel 2003 that mimics as closely as possible the Excel 2007 IFERROR function without using any array formula.
View 2 Replies View RelatedIn my spreadsheet, one user defined function i.e. pfizer is there which I want to convert into macro and use it in column H of sheet2 [sheets("sheet2").columns("H:H").select]
What should be the VBA code for this.
when I have started the macro with keyword as application. . the function is not populated.
-->I am able to populate the data with the formula like this = pfizer("I1")
Ihave this exel sheet i nedd function to write the starting date and time immediatly after i enter the name in the last colume ineed from exel to write the date and time emmideatly if the case is (done, cancelled ,or rejecteted)if the case is (select status )i want the cell empty but if the case is (pending)iwant to the program to calculte the deffirence between the ClosingDatetimee(which written by the program)and the delivering date(which entered manually by user)
View 9 Replies View RelatedColumnA Column B ColumnC (Yes/No)
2121 345766
23423 6456546
4234 6456456
7567 64566456
76756 654645
67567 3344534
76575 34534534
756756 45345
7657 534545
756767 4534534
756756 435345
Hello,
What I am trying to do is
Search the number written at ColumnB in ColumnA and if found write YES to column C
if not write No
I'm having trouble using the worksheet copy command in a VBA subroutine. I have the following line in my code:
[Code] ........
When I step through my code and execute this line, the sheet is copied as expected and put in the correct place, but then instead of the next line of code being highlighted, the pointer jumps to the first line of a function (in a different module) in my code.
Another interesting dilemma to solve. Using this formula:
View 2 Replies View RelatedFunction Haversine has correct value in debugger but in cell it has the same value as Haversine2. Is this a known bug?
Public Function Haversine(lat1 As Double, long1 As Double, lat2 As Double, long2 As Double) As Double
Dim temp As Double
[Code]....
In Mr Excel's Pod Cast on April 12th, he showed how to use the OFFSET function to define a range inside a SUM function. Then he had Conditional Formatting that would highlight the range that was being summed. Can anyone tell me what the formula would be inside the Conditional Formatting dialog box to get the OFFSET range to have a certain format?
View 9 Replies View RelatedI have a function
VB:
Function f1(Matrix As Range)
'Does something and returns f1 = a double
End Function
And a second function which defines and constructs a matrix of doubles to use as an argument in f1 to return a double:
VB:
Function f2(dD As Double)
Dim MatrixRed() As Double
Redim MatrixRed(1 To dD, 1 To 10)
For i = 1 To dD
For j = 1 To 10
MatrixRed(i, j) = i * j
Next
Next
f2 = f1(MatrixRed)
End Function
I get an output error (#VALUE). I think it has something to do with MatrixRed not being a range anymore?
let me start by saying that I know an example workbook would be useful here, but the part I'm struggling with is the [managementroster.xlsm] file, and there is A. no way I can release it to the internets and B. its so huge/complicated I couldn't even begin to reproduce a portion of it, scrubbed of data, and hope to maintain its functionality in a meaningful manner.
[Code]....
This formula checks a staff number on this spreadsheet, and then goes and looks at the staff number on the roster. Once found, it returns that staff members roster, but changes any manager codes in the MRC list to Mgr, and changes all other roster codes to Free.
I now need this formula, before altering roster codes to Mgr or Free, to only return codes that are a match for another table (or after really. I don't particularly care, so long as only codes are shown that match data from another table). I think an index/match function would do the trick, but this forumula is already at the edge of my excel ability, nesting another function within it is completey beyond me. The relevant cells for the index/match function would be:
This first Match function targets the column. $E3 is the date required, $BA$1:$DN$1 is the range the dates are entered in
Match: Lookup value = $E3
Lookup array = '[ManagementRoster.xlsm]Vacancies!'$BA$1:$DN$1
match type = 0
This second Match function targets the row. $A$4 is the department name, $B$434:$B$452 is the range where all departments are entered
Match: Lookup value = $A$4
Lookup Array = '[ManagementRoster.xlsm]Vacancies!'$B$434:$B$452
match type = 0
Index: array = $BA$434:$DN$452
So I think my final function is
[Code] .....
But I have absolutely NO idea where it would fit within my first formula, or how to code it so that my original formula only reproduces results that are found in both sheets, or anything.
I have created a List in excel of various tasks. (See attached example.) Each row contains one cell with a function which equals the cell above it and to the right. So the function for cell C3 would be D2. The only importance is that the cell mirrored is always the cell one above and to the right. However, now I would like to be able to rearrange this List, but the “one up and to the right” function will now be all over the place.
Is someone aware of a function which will target a relative location instead of an exact cell?
I keep getting the "You've entered too many arguments for this function" error.
Here is the formula:
=IF(B15=D40,E40,"",IF(B15=D41,E41,"",IF(B15=D42,E42,"","Invalid Shipping option")))
I am trying to nest an IF function with a CEILING function. If C10 is < 3.5, make it 3.5, however, if C10 > 3.5, CEILING (C10, 5)
right now it looks like:
If (C10
I have been looking around have this much code from this site, modified. What I am trying to do is calculate numbers by a position with cells D through K having numeric values. I have 'hardcoded' the cells (D2, E2, etc in the code below), but in reality I only want the current row (so if the formula is on the 2nd row, I want D2, if it is on the 3rd row, I want D3).
My problem is obviously the formula isn't working because I am not correctly tying back to the spreadsheet (Positioncalc.xls). When I put the formula in the spreadsheet it works, but in my script I get 0 everytime.
My Script:
Function Position(rCell As Range, Optional RightPosition As Boolean)
Dim vResult
Select Case rCell.Text
Case "QB"
vResult = (2*D2) + (2*E2) + (2*F2) + (4*G2) + (2*H2) + (1*I2) + (4*J2) + (3*K2)
Case Else
vResult = "Invalid Position"
End Select
If RightPosition = True Then
Position = vResult
Else
Position = "Position not valid"
End If
End Function
So, when I put =Position(A2,True) I expect to see the formula results of those cells calculated based on the position (QB, HB, etc with their unique formulas).
My next challenge after this is to highlight certain cells based on the Position. So if A2 = QB, I want cell D2 boldface and Red, etc. I have seen some scripts on colors and such here, so I might be able to figure it out.
I have a range of cells, for this example I will use 2.
Cell E17 = 77/170
Cell E18 = 8/9
Using the following formula: =SUM(RIGHT(E17,FIND("/",E17)))+SUM(RIGHT(E18,FIND("/",E18)))
This bring back an #VALUE! Error as the second part of the formula keeps picking up "/9" however the first part works fine, displaying "170"
Now if I use:
=SUM(RIGHT(E17,FIND("/",E17)))+SUM(RIGHT(E18,FIND("/",E18)-1))
It all works. The problem is that I need this to be automatic using the above way means having to add a "-1" to every formula for a cell with only 1 char to be added.
Using the formula:
=SUM(RIGHT(E17,FIND("/",E17)-1))+SUM(RIGHT(E18,FIND("/",E18)-1)).....
I have a tracking sheet (attached) that has many functions, but I'm having trouble with two of them. First of all, I have a Worksheet_Change event set that when a cell is cleared, it fills the cell with a formula to use the record above it as a default value if another cell is equivalent. This worked when I first wrote it, but now it seems to break every other time I use it. When assigning the formula it returns a Method Default/FormulaR1C1/Offset failed error message. It seems to be different for each one, each time and I can't figure out what the problem is.
The other problem I'm having is that I wrote a BeforeDoubleClick event to expand or contract any given record, or series of records. this too worked when I initially wrote it, but now is only hiding one row when it should be hiding eight or more.
I'm not terribly versed in VBA and totally baffled as to why I'm having these problems. As I side note, any ideas to clean up any of the code and make this run smoother (as ther will be many more series added when complete).
I have a user defined function in one VBA module that I'd like to call from another module, so I would normaly scope it as "Public".
However, as I don't want it to be available to Excel as a worksheet function, I would also normally scope it as "Private"
Is there a way to have a function that is available to other VBA modules in the same project, but not to Excel as a worksheet function?
A most of time I'm using VLOOKUP function. I want to call specially this function by pressing custom button (w/o pressing "Insert Function" and choosing VLOOKUP)
View 4 Replies View Relatedwhen you type in a builtin function in the formula bar such as =DAY(), a small callout box appears below telling you the syntax - in this case "DAY(serial_number)". Is it possible to achieve this for a user defined function?
I am trying to use the vlookup function together with an offset function but i am not getting it to work properly.
The situation is as follows:
I have a column E in which i use the vlookup function to find its corresponding value in B which in turn refers to a named range. However, the figure i want the function to return is 2 columns to the right and 2 rows above the value which the vlookup funtion finds in the first column.
I have though of using the offset function, but i cannot figure out how to make this work.
I'm comfortable with the IF statements in excel and not familir with many of the other functions available to me. I am trying to create a character calulator for Elder Scrolls III (Marrowind). So that a person may enter their race, ***, and other choices and their by calculating all starting stats. There are 10 races you can choose from and I can cover 9 of them with the if function (leaving one as if all other options are false). I would like to know if there is a better way such as a drop down list or some way to search an array or anything that would be better suited to search the race cell and return data if it's true. I'm running into the same probably with choosing the constalation (13 choices in this catagory).
I thought to split it two different data fields, by letting you choose from 4 in one cell and the other 9 in a different cell, but realized I don't know how to make it check two different cells for a choice to return it to the display cell without hitting the limitation of the 7 nested funcations in a forumla again.
I am using the COUNTA function which works great but I also have data that I dont want counted and do not know of the problem solver.
E.G
in B1 I have vlookup function thats brings back either "B", "C" or "M".
in c1 I have =IF(A1="C",B1,"")
Now, that tells me if the data is B or not. If it is, it says B If it isnt, its blank
Thats great but when im trying to count how many "B"'s there are, it counts the blanks as well!
I am using COUNTIF functions with Defined Name lists to quickly determine if a certain number is on a list. As a backdrop, I am using Chemical Abstract Service (CAS) numbers and attempting to somewhat streamline chemical approval for a small company. CAS numbers are often in the format of XX-XX-X with varied amounts of numbers. One of the defined lists however does not have dashes.
Thus, I am using cell B1 to enter the CAS# once and then for each list having a column to itself with an associated worksheet with a defined name list. Most of the columns have the function =B1 with the conditional formatting of =COUNTIF(definedname,BX) and formatted to turn red if the chemical is on the list. This is working for all of the columns except for the list that needs the dashes removed. For instance, CAS 64-67-1 is put in B1 and cell B5 has the formula =SUBSTITUTE(B1,"-","") which brings the number to 64671 which matches the number in my defined name list. However, the cell will not turn red. What am I missing?
I want a UDF; = OK (f1,f2) each argument being an alternative function. If f1 returns an error message then use f2. Should be easy but I cannot get it to work.
View 5 Replies View RelatedI have the following function:
=IF(AND(I17>=$I$1,O17>=$O$1,Q17>=$Q$1,F17