I have a column of data that keeps getting new information in it. what i need is a named range that i can use for a chart, first point in the named range will be the first value in the column, second point will be avg. of point 1 and 2, then 3rd point will be avg. of 1,2,3 etc.
View 1 Replies
I want to define a dynamic named range based on the last date in a range (AE4 down). Unfortunately there are gaps in this range where no date is in a cell.
View 5 Replies View RelatedIm sorting a dynamic range as mentioned in this Sorting a Named Range. My range is called drWarningTypes and is defined as:
=OFFSET(DataSource!$A$2,0,0, COUNTA(DataSource!$A:$A)-1,1)
When there is only one cell in the range, then running the following sort function includes A1 also in the search (and also adjoining columns).....
My searches have not produced anything that I could apply to this situation.
I'm trying to write VBA that would:
1. Search a Workbook for Dynamic Ranges.
2. When a Dynamic Range is found the code would:
A. Determine the current coordinates for the range.
B. Change the "Refers To" value From "=OFFSET...." To "=Worksheet_Name $Column$Row:$Column$Row"
3. Save Changes.
4. Close File.
My apologies but I have very little experience in writing VBA. I understand about variables, arguments, and IF/THEN but just enough to use functions within Excel.
Line of code that will Select a Named Range in this case I have Named a CELL "DataSummary" Need to use that named range by selecting 30 columns and 54 rows.
Range("DataSummary),(??,??) doesn't work.
I'm trying to create 3 different named ranges which are of alternate cells in columns. Each column runs from row 3 to row 106 and each named range covers 5 columns. Therefore each named range needs to contain 260 cells (52 cells per column x 5 columns).
Apart from the fact that you can't deselect a sell by Ctrl+Right Clicking on it, making a selection of the relevant cells is proving impossible.
For example I carefully selected all 260 cells for my 1st named range and entered a name. However when I then go into Name Manager I see that loads of cells haven't been selected at all and instead some cells in some columns have been but with huge gaps between them. If I try to then add cells my Ctrl+Clicking on them I find that I can add some but then one of two things will happen. I'll either click on one cell, the same cell every time, that deselects everything and I have to start all over again or when I try to save the new range I get a message saying the formula is wrong.
I've also tried typing in the names of the cells manually but the same thing happens. Annoyingly I've manually created a formula with all the cells I need in Notepad but even though the option to Paste is there, it won't let me paste into the field!
Is there a limit to the number of cells you can have in a named range?
Is there way of editing the name range accurately?
Is there a better, easier way of selecting all the cells for a named range?
[Code]....
I need to create a dynamic named range called "DIVLOC," that corresponds to a sheet called Divloc_List in the workbook. Then, I need to take this range and perform a vlookup against it. I tried to create the range in the sheet itself (it wasn't dynamic), and then used that in the vlookup in the vba code, but I got error 2402 (I think). I'm not sure how to define the dynamic range in vba code, and then use the range in the vlookup.
View 9 Replies View Relatedwhat would cause the formula for a dynamic named range to keep changing on its own? I enter the following formula:
OFFSET('Raw Data'!$D$2,0,0,COUNTA('Raw Data'!D:D),1)
Which I save and somehow gets changed to the following formula:
OFFSET('Raw Data'!$D$2,0,0,COUNTA('Raw Data'!XFD:XFD),1)
This is happening to several named ranges I created. I’ve tried to correct this by editing the formula which seems to work but changes again. I’ve also deleted the named range and recreated it with the same change process taking place.
In case it matters the named ranges are being created on a table imported into Excel via MS Query.
I am trying to create a dynamic named range to select a list of text entries from a number of different columns that I am using for Data Validation. The columns have entries of variable length, none more than 30. What I am seeking to achieve is that having selected a heading in cell C3 the available list in DV dropdowns elsewhere are governed by the contents of C3.
I have created a defined name, StartPos that uses the contents of C3 to evaluate to the cell reference (e,g $H$4) of the topmost cell in the relevant column. However when I try to use it in the usual formula
=OFFSET($A$1,0,0,COUNTA($A:$A),1) formula I try
=OFFSET(StartPos,0,0,COUNTA(StartPos:[ ],1)
I get stuck at what to put in the brackets. Ideally I would like to use the COUNTA to go down to the last entry in the column. However, even when I try to give the range a height of 30 rows:
=OFFSET(StartPos,0,0,30,1) I still get an error.
I am working on a process model, which requires that the same basic procedure be carried out for each unit in the process.
One worksheet is allocated to each unit with data concerning the flow streams being passed from the previous unit and the product being linked to the next unit. Although the same procedure is therefore being followed on each sheet, the input data differs.
I currently have the code to perform the required technical operations and calculations for a single unit. This code is very much dependent on named ranges.
I want to use the same core to perform the routine-operations, but need either unique named ranges on each page or I need a way to define name that is limited to the specific worksheet on which it is located.
For example, I might have an input range for a heater and splitter, with a technical add-in in VBA performing calculations on the input for each unit. How can I use two separate instances of the name "Input" instead of "Input_Heater" and "Input_Splitter"?
I want to create a charts on a pivot table, but I don't like the way Pivot charts function and the limitations they have.
So I want to create a normal charts that is dynamic and based on a pivot table.
In order to do so, I want to create dynamic named ranged for the data in the pivot table to use for the data series for the chart.
I can reference the week numbers (headers in the pivot table) for one data series and get the data by this formula:
=OFFSET(Weekly!$C$15,0,0,1,COUNTA(Weekly!$14:$14)-1)
$C$15 is the first cell that holds the data for the series.
Row 14 holds the week numbers (headers in the pviot)
However, I want to make that formula even more dynamic by having it reflect the changes done to the pivot table who's cells it references to.
So how do I do this using the GETPIVOTDATA function? (or some other function that makes it dynamic and reflect changes done to the pivot table and accounts for the row numbers with the data can change)
If I generate the GETPIVOTDATA formula and try to substistute the fixed cell reference for $c$15 with it, the OFFSET formula for the dynamic range gives an error.
And how can I grab the column headers (week number) dynamically?
I am doing an Advanced Filter, and I am using a named range in my VBA code that decides the Criteria range.
The dynamic named range is called 'Criteria' and this is the code:
VB:
=OFFSET(Sheet1!$A$2,0,0,Sheet1!$BZ$23,41)
However, when I run the VBA code, although it works perfectly, afterwards the named range has changed to:
VB:
=Sheet1!$A$2:$AO$3
I just want this to remain unchanged, as it works great. This is my VBA code:
VB:
'Filter and send data to new sheet
Sheets("Sheet2").Select
Cells.Select
[Code]....
I know how to create a dynamic named range so that no blanks appear in my data validation list but have only ever done this for a list in a column, i.e...
-----A-----
1--Apple
2--Orange
3--Pear
4--Bannana
5--
6--
A1:A6 would be named Fruit, then name manager, edit: =OFFSET($A$1,0,0,COUNT($A1:$A6),1)
The Data Validation list then shows Apple, Orange, Pear, Bannana. And if I add Peach into A5 later, that then appears in the list.
What I need though is to edit this as if the named range 'Fruit' covers cells A1:F1.
------A---------B-------C--------D-----------E-----------F
1--Apple---Orange---Pear---Bannana---
2--
create a dynamic named range with dates.
Example file. !
Dynamic-test-sheet.xlsx
I need an dynamic named range for column B(Project) with a date criteria.
so for example: I need a range with all records from Colomn B(Project) from year 2013.
I want to use this range to filter all unique projects by year.
I have already a filter/formula to collect a unique list of all projects.
I have a named range in a column for January data (non-contiguous cells). Every month I insert new data in the column to the right. Is there a way to have a dynamic range that grabs the same exact cells but in the new column but unselects the previous month data? Spreadsheet attached.
View 1 Replies View RelatedIn the attached workbook, I have identical sets of data in column A separated by an blank cell. I need a macro for the user form that i need to build. The code needs to find the end of each named range, (Range1,Range2 and Range3), to insert blank row at the end of each range and to copy the value of the textbox from the user form in each row so to keep the sets of data identical.
View 9 Replies View RelatedMy file has a code that refers to a dynamic named range. When I run the macro that range gets corrupted and I cannot figure it out why. before the macro the named range refers to:
=OFFSET(Manager!$A$1,0,0,MATCH("*",Manager!$A:$A,-1),3)
and right after I run the macro it turns to:
=OFFSET(Manager!#REF!,0,0,MATCH("*",Manager!$A:$A,-1),3)
I have dynamic named range that lists by columns. I can use this with data validation pull down on my worksheet and all is fine. But when I use this named range in the RowSource of a combo box in a userform, I only get the first column of data, or basically, the data in B1, but not C1, D1, ect. Here is the formula for the named range.
=OFFSET(INFO!$B$1,0,0,1,COUNTA(INFO!$1:$1)-1)
How can I retrieve the values from a dynamic named range with VBA?
Let's say we have created a dynamic list with the OFFSET function, how can I get the values of that dynamic range?
I have a sheet containing three drop down boxes which gives me a count of data in a table matching the criteria. (Between 2 dates and equals a depot name).
I am trying to create a chart to only show this data, but I don't want to do it using a pivot table as the end user has no understanding of them and just wants to fill in drop down boxes.
I am beginning to think that using a Dynamic Named Range might be the answer. I believe I am able to achieve what I want with this process but I am not entirely sure how to do it.
In the following line of code in my subroutine I name this range
which runs from A2:J2, the problem is later in the routine I delete certain unwanted columns which then shrinks this range. I always want it to be 10 colums wide. How do I make it dynamic with vba?
ActiveWorkbook.Names.Add Name:="TranslateShow", RefersTo:=Worksheets("TemplateTest").Range("$A$2:$J$2")
Can I also substitute the workbook actual name for ActiveWorkbook?
When I make a dynamic named range, I typically do something like:
=offset($A$1,,,counta(A:A),counta(1:1))
I remember awhile ago I saw (within some of the comments on Jon Peltier's site, I believe) a way to make a dynamic named range without using offset. Does anyone know how to do it?
Anyone run across this.....Over the past 1-2 years...I have setup a number of complex excel workbooks, that automate a lot of reporting for my employees. Suddenly, over the past couple months, I am finding that if I try to go back and edit many of my named ranges (created a while ago) that were created dynamically: "=OFFSET(Sheet1!$A$4,0,0,COUNTA(Sheet1!$A$4:$A$65000),4)"...excel crashes. I can't figure out why.
All I have to do is simply CLICK in the "Refers to:" field of the "Define Name" window (for the dynamically named range)....and I get "Microsoft Office Excel has encountered a problem and needs to close. We are sorry for the inconvenience."
If I drill down on "What is in the report", I see this "Error signature":..
How can I DISABLE dynamic named ranges ACROSS worksheets? Is there an option or code?
View 3 Replies View RelatedI am using follwoing piece of code for offset function. For Some reason it is not working.
Reference = Cells(TableRowNumber, TableColumnNumber).Address
Col = Application.WorksheetFunction. CountA(rngF.Columns(TableRowNumber, TableColumnNumber).EntireColumn)
ActiveWorkbook.Names.Add Name:=TableName, RefersToR1C1:= _
"=OFFSET(Reference,0,0,Col-3,1)"
Col value is also being calculated to zero. TableRowNumber and TableColumnNumber are the variables which store the starting location of the column.
I have a Defined Dynamic Name which is used to select my data. How do I call that when I create a chart in excel within the data source, so that the data source always refers to this dynamic range.
I have data A B C D E
1 2 3 4 5
9 4 5 6 7
this is so the series names will be the row and for each series the rows represent the data within each of the columns. I have a dynamic range that always selects the whole range called chartdata. How do I put that in the data source when it asks me in Excel 2007 as there is no wizard for seprate x and y ranges in this version.
I need to populate a cell with a dropdown list via data validation. The source is a list that contains blanks both in between data and at the end of the list. Like this:
John
Peter
(BLANK)
Ann
(BLANK)
Carol
(BLANK)
(BLANK)
(BLANK)
etc.
The blank cells are actually not empty, but contains formulas (and I therefore assume I cannot use COUNTA for leaving them out).
Anyone knows how to create a source list for the data validation dropdown list that leaves out any blanks (containing formulas) in the middle and the end of the range?
I am attempting to obtain the last non-empty row in a column of a spreadsheet by using the following formula
=SUMPRODUCT(MAX((A:A<>"")*(ROW(A:A))))
This works fine.
However, I'd like to make it more dynamic and be able to obtain a usable column reference (i.e., the A:A portion of the formula) from a named range (single cell).
here is the snippet of code I'm using
View 11 Replies View RelatedI have a Dynamic Named Range (Entries) that shows in my Name Manager...but is not being recognized in formulas.
The range is defined with a standard DNR formula, and selecting the code in Name Manager highlights the Dynamic Range.
[Code].....
But, when I use the NAME in a simple formula, I get an error. (#NAME?)
[Code] .....
