I created the csv file from excel sheet. Now I have created a copy of that excel sheet in a new sheet, and I am trying to load that saved csv in the new sheet. But when I do that I see some cells formatting mismatch (can be seen in attached picture) though I clicked on preserve cell formatting at the time of import.
I have a list box that I'm using to pull customer information from my "Customer" sheet to my "Invoice" sheet. I can actually open, select, and close the userform. However, I can't get the macro to put the information into the specified location on my "Invoice" sheet.
Here's my code so far:
Private Sub Cancel_Click() Application.ScreenUpdating = False
Unload Me
End Sub
Private Sub customer_Change()
End Sub
Here is the "Customer" sheet I'm pulling the info from:
And here is the location on the "Invoice" sheet that I'm trying to direct the userform to:
And here's my userform just for reference:
The userform works perfectly until I press the OK button. That's when I get the error.
I need to do a macro that will open a search window, the user would select a folder and it will search for a .csv file within it. Then after locating the file, it would automatically load it into a specific sheet in the workbook.
I previously had a query resolved in this forum when I was trying to write data to multiple sheets but the requirements have now changed and I need to update the script.
I have a multi-sheet workbook that calls a routine to rewrite sheet4 based on values in sheet1 each time sheet4 becomes the active sheet. This script makes single line entries or double line entries in sheet4 depending on whether data appears in one or both of a two specific data cells (col:J,K) in sheet1. However I now need to manually input extra data items into blank cells (col:B,C,J) in sheet4 and retain those data items after input, but each time I make sheet4 the active one it clears the contents of all the cells including the data that I have entered into cols B,C,J. Is there a way of fixing cols B,C,J on sheet4 so that they are not cleared when sheet4 is activated. Or is there a way of writing just the the additional lines added to sheet1 since the sheet4 was previously activated rather than clearing all the data lines written previously into sheet4 and rewriting them all from scratch each time the sheet4 becomes the active one.
I think you will need to see the workbook that I am working on to see how the sheets link and a zipped blank version is attached.
I wish for a macro to look in to a directory which remains constant, but then looks within a folder which is specified via a cell value in order to load a specific sheet from each file in to the workbook I am currently using. I wish for the loading to be done without having to open the workbooks manually, so something which opens them copies the data from the sheet specified and then closes.
This data is then to be pasted in to a new sheets within my workbook which are named after the file names that it pulls the "dump" sheet from.
As a side note, I will be using these sheets to produce calculations hopefully automatically as soon as they are loaded. They all have the same "shape" but contain differing data. Will it be easier in the long run for me to use this method of pasting data to new sheets named as their file names assuming there will be around 25 "dump" sheets needing to be loaded or would i be better having them paste all to one sheet just underneath each other with a couple of rows separating them?
I am using the following save as function on a template to save it as a workbook:
Sub SaveFileAsDate() Dim WSName As String, CName As String, Directory As String, savename As String WSName = "TMG Work Order" CName = "C4" Directory = "Maintenance Service Agreements" savename = Sheets(WSName). Range(CName).Text & Sheets(WSName).Range("F3").Text & Sheets(WSName).Range("K4").Text & Sheets(WSName).Range("K8").Text If Directory = "" Then Directory = CurDir & ""
On Error Goto errorsub: ActiveWorkbook.SaveAs Filename:=Directory & savename & ".xls" Exit Sub
errorsub: Beep MsgBox " Changes not saved!", vbExclamation, Title:=savename & ".xls" End Sub
It works fine but I need to be able to capture future changes to the sheet as the same saved name but to add and extention like (-Rev1). Once it has been saved as -Rev1, each additional time it saves, the -Rev number would increase. I searched the forums but didn't find an exact match.
I have this piece of code that loads a list box and it has worked without 1 problem for the longest time.
Today, there have been 4 or 5 instances when it doesn't work, where I hit the load button and it does nothing.
I have closed down and restarted and it seems to work but this is very annoying
If txtBusinessName = "" Then MsgBox "Please enter search criteria" Exit Sub End If lbxRecords.Clear Application.ScreenUpdating = False shData.Activate.......................................
Filename = Application.GetOpenFilename("JPG Files(*.jpg),*.jpg,GIF files(*.gif),*.gif") If Filename = False Then Response = MsgBox("Er was geen file gekozen!", vbOKOnly & vbCritical, "Er is iets fout gegaan") Exit Sub End If
Userform.Image1.Picture = LoadPicture(Filename)
Userform.Show I can choose a picture and it will be vissible in the Userform.
The problem is it's not saved into the userform it self. How can i make it so that when i choose a picture it's also the picture i see the next time i open the userform.
how I can pass a value to this function. For example I know the record id that I want loaded, it is 42, so I want to create a button that brings up record id 42 when clicked. I think to do this I would load the form, then call cmbSelect() and pass it Me.TextBox1 = Value "42", but I am not sure on the syntax on how to do this
Private Sub cmbSelect_Click() Dim r As Integer Dim cell As Range, rngRecord As Range
' Locate indicated record For Each cell In MyData If CStr(cell) = Me.TextBox1 Then For Each rngRecord In cell.Range("B1:AS1") If rngRecord.Offset(-rngRecord.Row + 1, 0) <> "" Then Me.Controls(CStr(rngRecord.Offset(-rngRecord.Row + 1, 0))) =
i had a file with 10,500 lines, 18,000 kb and it seemed slow to load (about a minute) every time i made changes and then saved it or reopened it.
so i broke the file up into 3 smaller files by cutting and pasting. i deleted all empty lines and columns beyond the file content. i defragged my compter. i cleared all excess format in job history - but -
one file now has 3,900 lines, 22,300 kb and takes 4 minutes to load.
one file now has 2,000 lines, 20,100 kb and takes 4 minutes to load.
one file now has 4,900 lines, 14,500 kb and takes 1 minute to load.
I'm trying to load the following XML file in Excel 2007 (from Excel 2007 VBA Programmmer's Reference) and get the error "Strict Parse Error" when I do so.
I have a checkbox with a userform. I can get it so that if I enable it and add data then it correctly shows as "Yes" or "No" within excel. However if I open the data using offset the checkbox is greyed out with neither Yes or No. Is there a way to make the checkbox allow and show a value of Yes/No?
I have a main form (Form1). From this main form another is loaded (form2) and then if necessary another form is loaded (form3). On form3 I have the following
I want in Cell A1 type by sample: GU23 and then presenter or press a button, and in cell E1 display the jpg image with a specific Size, mmm 40x40 is possible?
I have a Macro that copys all the cells with a 9 digit number in a range and lists them into col CC
However the way it is written Each macro is stored into its own worksheet. the problem is that i need to do this for all 43 tabs in the workbook which means a lot of copy and past when I build a new workbook.
So is there a way to load 43 diffrent macros into the 43 sheets in vba?
Or is there a way i can make the macros Global? so that they can all be stored in the same place but still work?
The below macro is saved under the workseet "PEBBLES" in vba
Code:
Code:
Sub Pebbles() Dim objReg As Object, objMatch As Object, objColl As Object Dim rngWhole As Excel.Range Dim rngCell As Excel.Range Dim lngRow As Long: lngRow = 1 Set objReg = CreateObject("vbscript.regexp")
I have created some user defined functions and have associated them to a custom category. To simplify things, I wanted to add these functions and the custom category macro to an Addin I already have installed for all my employees. How do I get the the custom category macro to excecute? It should run as soon as excel is opened...but I am not sure what event should be used and where is it installed?
I have an userform, with a label and several commandbuttons(for instance, command button A, B, C, ...) . Now if I click the command button A I would like to load in the label A text previously written in sheet1 range A1, if I click the command button B I would like to load in the label another text previously written in sheet1 range b1 (the old text shouuld obviously disappear)
We've developed some Excel spreadsheets which load in XML data from the web and then parses through it.
Dim oDoc As MSXML.DOMDocument Dim fSuccess As Boolean Dim oRoot As MSXML.IXMLDOMNode Dim oTimeProperty As MSXML.IXMLDOMNode Dim oAttributes As MSXML.IXMLDOMNamedNodeMap Dim oChildren As MSXML.IXMLDOMNodeList Dim oChild As MSXML.IXMLDOMNode Dim oOpChildren As MSXML.IXMLDOMNodeList Dim oOpChild As MSXML.IXMLDOMNode
To do this we add "Microsoft XML, version 2.0" in the " References" menu (which is from C:WindowsSystem32msxml.dll). This works fine on Windows XP and 2000 but Windows Vista doesn't have msxml.dll so it doesn't work. I've searched the web and found a page recommended using msxml6.dll as a direct alternative but unfortunatly the VBA script fails when implementing the MSXML object.
I am getting the following error message while trying to save an excel file into server location.
Your changes could not be saved to [filename], but were saved to a temporary document named [number]. Close the existing document, then open the temporary document and save it under a new name.
I am using: OS: Windows XP Professional with Service Pack 2. Office 2000 Server: Windows 2003 with Service Pack 1.
Running a macro that would insert product images in to a sheet based on a SKU that is in a different column. My sheet has an image in Cell A3 based on the SKU code that is inputted in to D3. All of my images are stored in F:Images I will have about 500 SKU's that all need images and will be named the same as the SKU I enter in to Column D.
I am very new to programming in excel, so bear with me. I need to have a window that pops up when you load excel. I need it to say something like
If A2 > A1, then the popup should say "value exceeded in row 1" If B2 > B1, then the popup should say "value exceeded in row 2"
If both of the statements above are true, then I would like both of the errors to be in the same window/popup, instead of two seperate ones. I hope thats clear.