i have a userform which has txt boxes in it which when the data is put in to it goes onto a sperate worksheet.
would like to click on a command button to view the worksheet that the data has gone onto
have tried
unload me
sheet1 show
unload me
sheet1.show
and also with the worksheets name as well
Private Sub UserForm_QueryClose(Cancel As Integer, CloseMode As Integer)
If CloseMode = vbFormControlMenu Then
Application.ScreenUpdating = True
Unload Me
RestrictedOptions.Show
Else
Cancel = True
End If
End Sub
Trying to use above code to unload active userform and show new userform when red X (close) selected by operator. With the code as is, the Unload Me leaves the form on the screen and displays the RestrictedOptions form. If i remove the Restrictedoptions.Show, the Unload Me does remove the original form.
When I unload userform2 it also unloads userform1. I need userform1 to be showing after unloading userform2.
View 3 Replies View RelatedI have a list box that I'm using to pull customer information from my "Customer" sheet to my "Invoice" sheet. I can actually open, select, and close the userform. However, I can't get the macro to put the information into the specified location on my "Invoice" sheet.
Here's my code so far:
Private Sub Cancel_Click()
Application.ScreenUpdating = False
Unload Me
End Sub
Private Sub customer_Change()
End Sub
Here is the "Customer" sheet I'm pulling the info from:
And here is the location on the "Invoice" sheet that I'm trying to direct the userform to:
And here's my userform just for reference:
The userform works perfectly until I press the OK button. That's when I get the error.
Using VBA I have used "LoadPicture" to load a picture to a picture frame on my userform. The actual file name is driven from a label. I now want to unload it so the value is None.
Example:
I have a userform that after some operations won't unload. It executes subs from other buttons on it but it won't unload. I use ScreenUpdating but I always set it to true.
View 9 Replies View RelatedI have a userform in my workbook with a button to access it on twenty different sheets in the workbook. Currently the userform will only populate the sheet titled "Blank1". How can I change it so it will populate the active sheet without naming it? So no matter what sheet I'm on when I hit the submit button the userform will populate only the sheet I selected the button on? See macro below.
Code:
Private Sub OKButton_Click()
Dim NextRow As Long
Sheets("Blank1").Activate
' Unprotect Sheet
ActiveSheet.Unprotect
[Code] ..........
I need a fix to my macro that does not specify the sheet name. It needs to populate the active sheet. Here is my code.
Code:
Private Sub OKButton_Click()
Dim NextRow As Long
Sheets("Sheet1").Activate
' determine the next empty row
[Code]....
how I can pass a value to this function. For example I know the record id that I want loaded, it is 42, so I want to create a button that brings up record id 42 when clicked. I think to do this I would load the form, then call cmbSelect() and pass it Me.TextBox1 = Value "42", but I am not sure on the syntax on how to do this
Private Sub cmbSelect_Click()
Dim r As Integer
Dim cell As Range, rngRecord As Range
' Locate indicated record
For Each cell In MyData
If CStr(cell) = Me.TextBox1 Then
For Each rngRecord In cell.Range("B1:AS1")
If rngRecord.Offset(-rngRecord.Row + 1, 0) <> "" Then
Me.Controls(CStr(rngRecord.Offset(-rngRecord.Row + 1, 0))) =
Code:
Private Sub Userform_Initialize(Change As Boolean, Optional Brand As String)
I want to load a userform with arguments, is this ever going to work?
I have an userform, with a label and several commandbuttons(for instance, command button A, B, C, ...) . Now if I click the command button A I would like to load in the label A text previously written in sheet1 range A1, if I click the command button B I would like to load in the label another text previously written in sheet1 range b1 (the old text shouuld obviously disappear)
View 7 Replies View Relatedi have a user form which is activated by a button. when this button is clicked excel crashs every now and then. i get an error message run time error 75, could not find object. it asks me to debug or end. whatever option i choose when i try to save the worksheet there after excel crashs and closes. any body else have this problem, what could be the cause?
View 6 Replies View RelatedI have tried a couple things to get this image to show up on my userform and i keep erroring out.
Run-time Error '404' Object required
If i hover over the "userpic" in debug it has the correct referance, its just not doing anything.
Any help or suggestions would be great.
-LightData = Userform
-Pictures all held on sheet5 of wookbook
(I've search and looked at all the threads, which actually lead to what i have below)
Private Sub ComboBox1_Change()
Dim RowOffset As Integer
RowOffset = ComboBox1.ListIndex
userpic = ComboBox1.Text
LightDate.Image1.picture = Sheets("sheet5").Shapes(userpic)
TextBox1.Text = Sheet1. Range("c2").Offset(RowOffset, 35)
CheckBox1.Value = Sheet1.Range("c2").Offset(RowOffset, 37)
CheckBox2.Value = Sheet1.Range("c2").Offset(RowOffset, 38)
CheckBox3.Value = Sheet1.Range("c2").Offset(RowOffset, 39)
CheckBox4.Value = Sheet1.Range("c2").Offset(RowOffset, 40)
CheckBox5.Value = Sheet1.Range("c2").Offset(RowOffset, 41)
CheckBox6.Value = Sheet1.Range("c2").Offset(RowOffset, 42)
CheckBox7.Value = Sheet1.Range("c2").Offset(RowOffset, 43)
CheckBox8.Value = Sheet1.Range("c2").Offset(RowOffset, 44)
CheckBox9.Value = Sheet1.Range("c2").Offset(RowOffset, 45)
CheckBox10.Value = Sheet1.Range("c2").Offset(RowOffset, 46)
CheckBox11.Value = Sheet1.Range("c2").Offset(RowOffset, 47)
End Sub
I have a workbook with images and have created a userform using VBA in the same.
I wanted to load a picture in the userform from the images on sheet 3.
I included a couple screen prints showing that the form exists, and that it is not misspelled in the code. What should I look for?
View 4 Replies View Relatedwhy is this giving me a type mismatch error?
Sub loadMenu(menu As UserForm)
Load menu
menu.Show
End Sub
I have an image box on a userform in Excel VB. Is there ANY WAY to load an image into this image box from an object that I have loaded into an excel worksheet something like
If userform1.checkbox1=True Then
userform1.image.picture = loadpicture (Worksheets("Sheet1").shapes("Object 1"))
ElseIf userform1.checkbox2=True Then
userform1.image.picture = loadpicture (Worksheets("Sheet1").shapes("Object 2"))
Else
msgbox "No image"
Endif
I'm trying to do is set up a form load event to initlize some controls. Here is my
Private Sub Form_Load()
'Initialize the form
lblProcessing.Visible = False
txtFileName.Text = "Enter a file name"
End Sub
At the moment, this event is not triggering. I have the code in the code behind my form - should it be in a module? PS: This site is great - it's answered a lot of my other questions so far without me having to make any posts.
I need to do a macro that will open a search window, the user would select a folder and it will search for a .csv file within it. Then after locating the file, it would automatically load it into a specific sheet in the workbook.
View 9 Replies View RelatedI currently have the following macro running to set a chart's data values:
Sub C3Quarter12013()
'
' C3Quarter32013 Macro
'
'
ActiveSheet.ChartObjects("Chart 2").Activate
ActiveChart.PlotArea.Select
ActiveChart.SeriesCollection(1).Values = _
[Code] ......
When I copy the tab and change some of the data within the cells, I want the macro refer to the chart on the current tab and the values in the current tab - as currently it refers to only "Chart 2" and the values in the tab 'Figure 2 - WE OPH'.
I've tried changing the sheet name to ActiveSheet.name but that doesn't seem to work.
I created the csv file from excel sheet. Now I have created a copy of that excel sheet in a new sheet, and I am trying to load that saved csv in the new sheet. But when I do that I see some cells formatting mismatch (can be seen in attached picture) though I clicked on preserve cell formatting at the time of import.
View 2 Replies View RelatedI wish for a macro to look in to a directory which remains constant, but then looks within a folder which is specified via a cell value in order to load a specific sheet from each file in to the workbook I am currently using. I wish for the loading to be done without having to open the workbooks manually, so something which opens them copies the data from the sheet specified and then closes.
This data is then to be pasted in to a new sheets within my workbook which are named after the file names that it pulls the "dump" sheet from.
As a side note, I will be using these sheets to produce calculations hopefully automatically as soon as they are loaded. They all have the same "shape" but contain differing data. Will it be easier in the long run for me to use this method of pasting data to new sheets named as their file names assuming there will be around 25 "dump" sheets needing to be loaded or would i be better having them paste all to one sheet just underneath each other with a couple of rows separating them?
I have three CheckBoxes and I use the UserForm Initialize event to set them to False. I thought that Unload Me would reset them. It does not matter except I do not want to ahve problems later. If UnloadMe in any way resets them then I suppose the variable in the main code would have to pick up the values before the UserForm gets unloaded.
View 9 Replies View RelatedI have over 20 Userform which have one textbox with the same name txtsejobcode1.
Additional I have a UserForm in which user can search for a needed job code.
I wanted that after a user will choose a job code the job code will be added in to the active userform with the textbox named txtsejobcode1.
I could build this:
[Code] ..........
But in the line with Combobox I'm getting a error 438
Run Time error 438 Object doesn't support this property or method.
I have a userform with a dropdown box, a refedit and an accept button.
The user selects an item from the drop down box and then selects where on the sheet they want to place the item. I am wondering how to move the selected box in my Userform once the user has selected an entry from the drop down list. This is so that they dont actually have to click in the refedit box after selecting from the drop down box.
I have a user form in which i want an active cell value when it is initialized, its a text box which should not be editable but should able to copy when its shown.
Code:
Receipt_Number.Text = ThisWorkbook.Worksheets("reference sheet").ActiveCell.Value
I have created a user form that has 6 input boxs and at the bottom of the userform has a seventh box that has a running total. I have two buttons one to "accept" and one to "cancel". My prloblem is creating the code to make it work correctly.
1) if a cell in B5:B20 become the active cell than the userform is to open up.
2) once the useform is open the user can input up to six different numbers into the input box's which will show the runinng total in the seventh box.
3) Once all numbers are inputed into the input box's the user can hit "accept" to post the total into the active cell or hit "cancel" and nothing have nothing happen.
I use several different userForms at different times in my macro. I am having an issue where soemtimes Excel will be stuck (not frozen) after I close a form. Its almost like the form is being hidden but Excel thinks that it is still visible, so execution halts.
I've tried leaving the form with both me.hide and unload me. My code is pretty lengthy, so I don't think submitting it is appropriate. I believe my problem is my own lack of knowledge on hide vs unload.
Can anyone help me out here?
I have data in range J2:J365 , H368:H401 & J403:J827. i want to check wether this range have negative values or not if yes load all negative values in the listbox1 by clicking checkbox.
View 3 Replies View RelatedWhat I have is a sheet that is copied periodically from some source sheet, and on this sheet is a table. This sheet is called "Onsite Checklist Template" and it's table is titled "Checklist". I also have another sheet called "Loggers and Initial Notes" which has a tabled titled "Record", and then finally a title sheet call "Proj Details".
To clear this intro up - The sheets, in their order, is: "Proj Details", "Loggers and Initial Notes", "Onsite Checklist Template". The tables: "Record" on "Loggers..." and "Checklist" on "Onsite..."
When the user wants to make a new site visit, he/she fills in the requested date and then selects a button on "Proj...". When this button is selected, it copies the table data on "Record" and puts it on "Checklist", then inserts a new worksheet tab, always in the 3rd position (the title is based on the site visit date in which the user entered), which is a copy of "Onsite...". Now we have another sheet with a table called "Checklist1", and upon another new site visit, there will be another worksheet with "Checklist2", and so on.
On the "Onsite..." worksheet, there is a button on it which also gets copied with the worksheet so that every new worksheet has this copied "Checklist ???" and this button. I'm looking for a macro that, when the button is selected, will bounce the active sheet's table "Checklist ???" off of "Record" and make changes as needed.
"Checklist ???" data range is B11:M20 (the header is on row 10); "Record" data range is B29:Q78 (the header is on row 28); Column headers are titled the same, just that "Record" has 4 extra columns, 3 in the middle and 1 on the end. "Checklist ???" columns 1-12 to "Record" columns 1-7, 10-12, 14-15. The search criteria is the 4th column in both tables ("Trk #").
I need the macro to do the following:If it finds a match, then update "Record" as needed with data from "Checklist ???", changing whatever cell is different in the row that contains the matching "Trk #", so long as the cell on "Checklist ???" is populated (i.e, if a cell on the target row of "Record" has a value, but it's blank on "Checklist ???", then "Record" wins; if it's blank on "Record", but populated on "Checklist ???", the Checklist wins. If both populated but different, then Checklist wins.If a "Trk #" exists on "Checklist ???" but is not on "Record" then add the line to "Record" (the 1st empty row, table size remains)I see no need for any "delete" at this time.
My concerns: The last column on record (column #16) is the filtering column for the worksheet copy event and needs to be left alone (it's formulated to produce a "Yes" or "No")I would like the ability to adjust table sizes if needed without modifying the macroThe table rows on "Checklist ???" will not be changed, deleted, or altered in any way by the macro.