Macro To Run When I Press Alt+v

Dec 5, 2008

I want a macro to run when I press alt+v ..

I hv written following code for that :

Application.OnKey "%v" , "hello"

But when I press alt+v, it opens the View toobar from the top ..

View 9 Replies


ADVERTISEMENT

Macro Sheet When Press Crtl+F11

Apr 18, 2007

What is the use of Macro Sheet in Excel. (When you press Crtl+F11)

View 2 Replies View Related

Macro To Press F2 Key For Multiple Cells Simultaneously

Nov 2, 2011

I am trying to use Vlookup and match on a large volume of data. The Vlookup true function was having trouble when an exact match occurred. I changed the table to allow for all options (sizes in this case) but the Vlookup with false came up with #N/A. The Vlookup key was the result of a formula. I then typed the same data and the formula was successful. I then copied and pasted Value the entire contents of the cell. I still received the #N/A. I then pressed [F2] to edit the cell and then pressed enter and this was successful. I have over 60,000 cells to edit and can not do manually. Any macro run the [F2] function on a range of cells or another way.

View 9 Replies View Related

Excel 2007 :: VBA Macro Executes When Press ESC?

Jun 4, 2012

I have an excel workbook created in 2007, but now running in 2010. In the workbook I have a form Combo box with a macro assigned to it. When I click any value in the combo dropdown list the macro executes. In 2007 I could click the combo dropdown box and then press ESC to exit from the form control without executing the assigned macro. Similarly I could also click on any other cell to exit from the control without executing the macro.

But, in 2010 if I press ESC or click on any other cell the macro will execute. Sometimes I want to be able to exit from the combo box without executing the macro.

View 3 Replies View Related

Macro Running Very Slow - Cell (press Esc To Cancel)

Dec 10, 2009

I have written some very basic code to format a report in excel. When I run the code it take a very long time to execute and I receive the following error message at the foot of the page:

Cell (press esc to cancel)

Annoyingly I have had this error before and found the solution on the web but can't remember where. If memory serves my right I deleted some temp files from a specific location on my hard drive?

View 3 Replies View Related

Press And Show Only Row?

Jan 31, 2013

I have a lot of rows, where they belong together in groups, but these groups are not in order. for example. 3,14,21,45 rows belonging together and a group of rows 1,16,32,67 a second group.

My desire is to define a "button" that shows only one group at a time.

See picture : excel 2 UK.jpg

View 7 Replies View Related

Using VB To Press Certain Keys

Jan 15, 2009

Is it possible to create a script that will allow mimic the keypress of a keyboard?

For example, if I press the windows key and R, windows will bring up the run box and then I can type in C:Windows and press enter and it will open C:Windows.

Is it possible to have Excel do this?

This would mean I create a macro that has keypresses programmed in so I can run a command prompt and enter some details there then copy the data and paste it into Excel.

View 9 Replies View Related

How To Add Press Effect For A Button

Oct 10, 2012

I have added a shape to my spreadsheet to work as a button. All is fine and it has the desired functionality however, adding the actual effect or simulate the effect of a button click/pressed?

View 14 Replies View Related

How To Hide A Userform When Press ESC

Mar 15, 2014

How to hide a userform when press "ESC"

View 1 Replies View Related

Detect Key Press Upon Startup

May 27, 2007

Is there some way to detect that a key (specific or any) is being pressed when an Excel workbook is being opened to activate optional precessing in the macro code?

View 9 Replies View Related

Execute VBA Module By Enter Key Press

May 29, 2014

Is it possible to execute the vba program by pressing the enter key in the excel sheet.

For example i want to input the data in cell A1 and want to press the enter key to execute the written vba program.

View 2 Replies View Related

Jump To Specified Cell When Press Enter

May 2, 2008

On Sheet1 I always enter information into Cell X1 first, then hit Enter. Now I need to continue entering data into Cells B10 through B75. Is there a way to set Cell X1 to jump to Cell B10 after I hit Enter?

View 14 Replies View Related

Press The Delete Button That Pops Up

Apr 28, 2009

During the course of one of my macros running I want it to press the Delete button that pops up? I used to know but can't seem to trip across it. I have attached a screen shot of the Delete button I want to be pressed.

View 4 Replies View Related

Press Down Arrow Instead Send Ctrl+Alt

Dec 24, 2008

How to send by holding Ctrl+Alt and i need to press Down Arrow

I tryed with

Sub test()
Application.SendKeys "^+({DOWN})"
End Sub

View 9 Replies View Related

Open Outlook When Press Button

Dec 30, 2009

We have a spreadsheet. I want to add to code something that will open outlook when i hit a button on the spreadsheet.

I don't always need outlook open, so I want to be able to just open it with a touch of the button from my spreadsheet.

View 9 Replies View Related

Select All Range Then Press CSE Button

Feb 23, 2010

i notice there is two case to enter CSE
1. select all range then Press CSE
2. Cse then Fill down
when we use the first case and the second case

View 9 Replies View Related

Select Listbox Item On Key Press

Dec 11, 2007

I'm using list boxes in an excel sheet. What I want to do, if at all possible, is to be able to TAB to the list box and then hit the first letter of the City I'm trying to go to. The list is in alphabetical order, but if I tab to it and want Philly, I want to just be able to hit the P button and get to the Ps.

View 3 Replies View Related

Exit Sub When Press Cancel Button On Userform?

Mar 22, 2014

i have a userform with label, textbox, ok and cancel buttons.this userform is to prompt users for password.

i use select case for capturing the password entered.

case 1 is correct password

case 2 is blank password which is vbnullstring

case 3 is wrong password where i use case else

when i click on cancel button, it will be detected as case else. cancel=true for my cancel button wont work.

i think the logic is to put an IF statement before SELECT to capture if the cancel button is clicked.

View 2 Replies View Related

When Press Print The Specific Column Not Show

Jan 28, 2009

I am after a code that will sort out the below printing problem

I want excel to hide column E from the printer, i want to see the information myself but when i press print column E will not show


http://www.excelforum.com/excel-new-...ml#post2034148

View 11 Replies View Related

Code That Gets Stuck In The Loop And Will Not Stop Unless I Press The Esc Key

May 26, 2007

I have the following code that gets stuck in the Loop and will not stop unless I press the Esc key:

Sub WIP()
Dim ws1 As Worksheet, ws2 As Worksheet
Dim lastrow As Long
Dim newRow As Long
Set ws1 = Sheets("PAYCALC")
Set ws2 = Sheets("WIP")

Application.ScreenUpdating = False
With ws2
.Range("A2:C" & .Range("A2:C2").End(xlDown).Row).Clear
End With

x = 10
lastrow = ws1.Range("C5").End(xlUp)
Do
newRow = ws2.Cells(65536, 1).End(xlUp).Offset(1, 0).Row
ws2.Cells(newRow, 1) = ws1.Cells(x, 2).Offset(-2, 0).Value
ws2.Cells(newRow, 2) = ws1.Cells(x, 2).Value
ws2.Cells(newRow, 3) = ws1.Cells(x, 2).Offset(3, 0).Value
x = x + 21
Loop Until x >= lastrow

There's a twist to this. I have the same identiclecode in a different module. The only difference is ws2 is different and there are 7 newRow's. Other then that the two are the same.

That one works just fine without getting stuck. It will go through 200+ sets of records and stop when it reaches the last one.

The one above will not stop even though I just put in three records on ws1 for testing.

View 9 Replies View Related

VBA Code To Activate/Press Button On Web Page

Jul 6, 2009

VBA Code To Activate/Press Button On Web Page. press a button on web page using VBA

View 4 Replies View Related

Move To Next UserForm Control With Down Arrow Key Press

Sep 30, 2006

I am trying to setup a shortcut key while in a userform so you can press the page down key and the focus will jump to an "Ok" or "Close" button.

I tried the following keypress procedure without any luck.

Private Sub UserForm_KeyPress(ByVal KeyAscii As MSForms.ReturnInteger)
If KeyAscii = vbKeyPageDown Then
Me.btnClose.SetFocus
End If
End Sub

I even tried a similar test on a textbox control wihtout luck.

Private Sub TextBox1_KeyPress(ByVal KeyAscii As MSForms.ReturnInteger)
If KeyAscii = vbKeyPageDown Then
MsgBox "You Pressed PageDown Key"
End If
End Sub

I should say that this is a form that has a multi-page control on it and the showmodal property set to false.

It's almost like the event doesn't even fire. Does anyone have any ideas on how to get this to work?

View 9 Replies View Related

Move Contents Of Cells From One Cell To Another At The Press Of A Button

Jun 14, 2014

Attached is a document, column C & F highlighted in green are areas that users will input data. I need to create a button (top left of spreadsheet) that when pressed moves both the data from column C & F up into the box above. The top set of dates would be deleted and the dates from Trip 2 would move up into the Trip 1 position, Dates from Trip 3 would move up into Trip 2 position and so on.

View 2 Replies View Related

>>> Track If User Press Cancel In Save As Dialog Box

Oct 23, 2007

Application.Dialogs(xlDialogSaveAs).Show

I am using above code and I want to find out whether the user pressed the save button or the cancel button in order to take the next action.

View 2 Replies View Related

Input Data In A Cell And Press Enter - Auto Save?

Dec 28, 2011

I have a excel sheet in it. Is it possible? That when in any cell I input data in a cell and press "enter" then it save automatically.

View 8 Replies View Related

Automatically Refresh Without Having To Click Or Press Enter To Get VBA Code To Work

Feb 25, 2013

I have some VBA code which hides columns based on a cell value. The cell value changes according to which option button is selected. The code works but not when the button is selected and the cell value changes. It is necessary to click elsewhere in the sheet or press Enter to get the columns to hide. I want it to do it automatically as a user wouldn't know to click elsewhere.

The working code is:

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Range("N5").Value = 2 Then
Columns("O:R").EntireColumn.Hidden = True
Else
Columns("O:R").EntireColumn.Hidden = False

End If
End Sub

N5 is the linked cell for the option button.

View 4 Replies View Related

Column Of Dates Not Recognized Unless Manually Select Each Cell And Press Enter

Apr 12, 2013

I have a column of dates that are not being recognized as dates unless if I manually select each cell and press enter. For example the cell value is "Jul/13' and isn't recognized as "01/06/2013" until I select it and hit enter. How can I get around this?

View 8 Replies View Related

Press Button To Open Form For Data Entry And Then Send Matching Data To Another Sheet

May 5, 2009

Now that the calculations are working, with the press of a button, I need to be able to select a range of dates and copy all lines within the range to a seperate sheet with the desired name under the same headings they currently reside under. I have included some modified code that is being used in another spreadsheet that was created for me, but I do not pretent to understand all of it and I no longer work with the creator of the spreadsheet. How do I use a button to open the form for date selections and entering the name of the new sheet, and then use the start button on the form to begin the matching and copying to a new sheet? If there is an easier way I am all for that too.

View 14 Replies View Related

Press Command But And Execute The Code Assigned To Another Command Button

Apr 14, 2009

Is it possible that when you press a command button, that the first thing it does is to execute the code assigned to another command button (IE in another sub).

View 9 Replies View Related

Conflict Between Auto Save&close Macro And Show/hide Sheets Macro

Oct 16, 2009

I am trying to make a save&close workbook macro.

I found several examples on google, but unfortunatly it conflicts with another macro I use for forceing users to enable macros (hide all sheets except one if macros are disabled).

The attached file is an example contaning the save&close code and the show/hide sheets depending on macros enabled.

If the file is opened with macros disabled then only one sheet will be visible.
If the file is opened with macros enabled other sheets are visible.

The problem if that this code uses a custom save, witch makes the save&close not save... (in module1 and in ThisWorkbook)

The pourpose of the save&close is to make sure some users don't forget the excel open and thus block access to it. So if a certain idele time passes excel has to save and close without any confirmation messages.

View 10 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved