Set Up Solver In Order To Maximize Revenue?

Jan 13, 2014

Any way to set up Solver in order to maximize revenue, but with the constraints equaling ONLY one of two values (e.g. 0 or 100)?

View 1 Replies


ADVERTISEMENT

Multiple Solver Constraints In Solver

Sep 10, 2006

I have a cell, D5, which is the sum of three other cells, A5 B5 and C5. (all currently empty). Cells A1 through C4 are filled with various numbers.

What I've been trying to do is use solver to say: Make D5 equal 200, do it by manipulating only A5 B5 and C5, and make it subject to the constraint that A5 must equal a value selected from A1:A4, and B5 must equal a value from B1:B4, and C5 ...etc. I have deliberately set it up so that there is only one solution.

I was doing fine until trying to create the constraints. How can I make a constraint that says "this cell" must equal "one of the following cells"? And if I can't do that, is there an alternate method of achieving the same result?

View 9 Replies View Related

Maximize Performance Of Array In VBA

Jun 20, 2007

I'm trying to write some code that is performing operations on large arrays, using a pair of For loops. In languages like C++ and Fortran, it makes a big difference to the performance of the code which way round you put these 2 For loops, due to the way that array data is stored in the computer memory. However, for VBA, I've no idea which way round this is. For an array, A(i,j), do I want


For i = 1 To N
For j = 1 To M
A(i,j) = Cells(j, i).Value
Next j
Next i

View 9 Replies View Related

Cannot Maximize Minimized Excel Window

Sep 18, 2013

Recently my friend forced Excel to close through Task Manager by Ending the Proccess... Since he did that, every .xls(x) file do not opens. No errors. Just Excel Icon on taskbar appears.... as it is minimized... But it doesn't minized.. Either this icon on a taskbar is minimized Excel icon, or this just an icon ....

RepairedReinstalleUpdated
No result ...

View 5 Replies View Related

Maximize Value Within Several Defined Sets Of Constraints?

Jul 22, 2014

I am trying to maximize fantasy football points based on projected points scored, salary and positional limits.

I have multiple sheets dedicated one per position (i.e. sheet named "QB", sheet named "RB", etc.). The relevant columns are: Name; FPT (projected points); Cost

NOTE: I have combined all the data into "sheet1" if necessary.

I need a VBA program or Solver to diagnose the largest possible combination of projected points based on the following constraints:

Constraint 1: Total value must be less-than or equal to $1,000,000
Constraint 2: Total players used must be equal to 10
Constraint 3-?: Of the 10, 2 must be QB, 2 must be RB, 2 must be WR, 1 must be TE, 1 must be DEF.....the other 2 can be RB, WR or TE

Obviously, each player can only be used once and I'm not sure if Solver can abide by that constraint, nor do I know how to apply the others. I'm thinking VBA could work, but I'm not familiar enough with the language to hammer out the code.

I have a small macro that downloads some data from a website and tweaks it Daily fantasy cheatsheet.zipa little, but I hope that won't affect any computations involving those values.

View 4 Replies View Related

Maximize Worksheet Upon Activation / Open

Feb 1, 2014

I am currently putting together a Directory and want each of the 19 programs and the worksheets to be maximized when they are opened.

View 1 Replies View Related

Excel 2010 :: How To Maximize Print Area

Dec 3, 2011

Using Excel 2010.

I am building a dashboard and would like to maximize the print area so everything fits on 1 sheet 8 1/2 x 11 landscape.

My settings at this point:
Margins:
Top 0.25
Right 0.25
Bottom: 0.25
Left 0.25

Row Height 7.5
Column Width 1.29

Seems small, I know but as I develop charts, titles, infographics, etc... I will merge rows and columns as needed so as to leave just enough white space for clarity while packing critical information into 1 sheet.

My problem - as I keep playing with maximimizing number of columns and rows Excel keeps scaling. Is there a way to calculate the correct number of rows and columns to maximize the available space?

View 2 Replies View Related

Worksheet Tabs & Minimize/Maximize Disappeared

Aug 31, 2007

Edges of worksheet have gone - no tabs, no minimise/maximise.

View 7 Replies View Related

Solver Solver To Calculate Through VBA

Jan 12, 2007

I have to use use the solver to calculate something (a mean-variance framework).

I am using the solver to minimize a cartain cell (variance) by making two cells equal through (expected return) by varying 10 cells( weights of assets), but I have to repeat this for 500+ times (for different expected returns).

Someone told me that I could best use some sort of loop through VBA. But I don't have a clue how that works.

View 13 Replies View Related

Solver- When Solver "changes Cells"

Jan 21, 2009

I want to use solver program. But when solver "changes cells" i want it to trigger my pivot tables in the workbook. So i added the code to my worksheet:

Private Sub Worksheet_Change(ByVal Target As Range)

ThisWorkbook.RefreshAll

End Sub

So when a change occurs, all my pivot tables will get refreshed and my data will change. Is solver able to trigger this event while solving an optimization problem?

View 9 Replies View Related

Revenue Summation By Account Name

Aug 15, 2013

Attached is my sample data...Indicative Data_Revenue 2.xlsx

My aim is to populate columns C to G (Q1,Q2,Q3,Q4) automatically via vba against a particular account name(in expected output tab).The account names will have a Key word (listed in the "List Of Account" tab)The Q1 Sum should be a sum of Q1 revenue against all such accounts containing the Key word. Same applies for Q2,Q3 and Q4.Each account has 3 types. viz, BAU, Top Commits and Strong Prospect.

The BAU quarter sum should be pulled from "Revenue 1 - Assured" tab where Q1=Apr+May+Jun, Q2 = Jul+Aug Sep and so on. The Top Commits Sum should be pulled from "Revenue 2 - Expected" against all records where "Sales Stage" Column equals Stage 4. The Strong Prospect Sum should be pulled from "Revenue 2 - Expected" against all records where "Sales Stage" Column equals Stage

Currently I am using formulas but there is too much of hard-coding and its becoming difficult to manage as Accounts increase.

View 9 Replies View Related

Find How Much Revenue I Earned

Nov 21, 2007

I own a local restaurant and want to streamline my excel spreadsheets. Currently, I have yearly workbooks (2005, 2006, 2007, etc.) that have all of my revenues included in them, split up monthly by worksheets. I then have lines for each day within the month for the revenues earned at that day.

So, if I want to find how much revenue I earned on March 1st, 2006, I go to my 2006 book, March worksheet, and look at the 1st. Here's where my problem lies.

I want to create a new spreadsheet where all I have to do is type in a certain date (say March 1st, 2006) and all of the information for the date will be automatically displayed on the new sheet.

View 14 Replies View Related

Revenue Spread Over Months

Apr 21, 2009

I am trying to figure how to get a formula to work that will spread revenue number over a four month period. The dates will be dynamic so they will change but the spread stays the same.

I have attached a snapshot of what I am trying to do.

View 9 Replies View Related

Calculate The Total Revenue

Feb 6, 2010

I have a table which shows the monthly revenue of Company ABC , by client / by location / by business line.

ClientCountryBusiness LineJan-10 Feb-10Mar-10A001SingaporeResidential$ 50,000.00 $ 23,333.00 $ 54,115.00 D003SingaporeRetail$ 50,000.00 $ 21,548.00 $ 54,654.00A001SingaporeCommercial$ 63,321.00 $ 75,542.00 $ 21,564.00 D003AustraliaResidential$ 26,564.00 $ 50,000.00 $ 45,654.00 G002AustraliaRetail$ 50,000.00 $ 21,546.00$ 63,321.00G002AustraliaCommercial$ 26,602.00 $ 65,341.00 $ 24,568.00 A001Hong KongResidential$ 33,565.00 $ 26,564.00 $ 64,454.00 G002Hong KongRetail$ 54,232.00 $ 50,000.00 $ 15,454.00 D003Hong KongCommercial$ 26,564.00 $ 21,564.00 $ 23,333.00

If I want to calculate the total revenue for the month of January based on the following variable criteria:

Criteria
Client: A001
Country: Singapore
Month: Jan-10

I can achieve that with the use of SUMPRODUCT. However next month, I will then have to manually change the SUMPRODUCT formula so that it will extract data from the Feb column instead of the Jan column.

Is there a formula which will not require me to change the formula every mth? Ie. I can get my answer simply by changing the criteria?

View 9 Replies View Related

Sum Revenue After 3 Filters And 1 Criteria

Aug 6, 2006

I made 2 sheets: the first one contains the database and in the second one i want to analyze it. Now i am looking for a special sum- function. I want to sum total revenue for a particular company (criteria 1), in a filtered country (criteria 2), month (criteria 3) and class (criteria 4). I'd like to first execute the three filters (country, month and class) and then be able to total revenue of that particular company. Note that after the filters still several companies are visible in the database. Does anyone know how to calcalate this in cell B9:B12 (Analyze sheet) of my attached file.

View 9 Replies View Related

Getting Average Revenue Per Client By Month?

Jun 26, 2014

I have sales data for Clients that has the client name month and year(combined for date) and revenue for each month. I would like to take all clients in a given month and see the average revenue per client and then be able to display that in a bar chart by month. I also have the data loaded into a PowerPivot Data Model.

View 1 Replies View Related

Formula For A Deferred Revenue Model?

Dec 27, 2013

I have a deferred revenue model. Revenue from each month earns out at an equal rate over twelve months. Sales for each month are in column B (B21) and C. I created formulas for the first year but when I get to the second year, I'm not sure what to do, because the earned premium will include values from previous year sales and current year sales.

View 4 Replies View Related

Calculating Revenue By Month Between Two Different Dates

Jan 8, 2014

I have to calculate the flat revenue split by month between 2 different dates. The two dates may be in the same year or different years.

excel formula for the same.

Is it possible to do the same in pivot?

View 1 Replies View Related

Creating Revenue Recognition Waterfall

Oct 3, 2008

So here's the setup: A customer purchases a service which lasts 6-months. As such, revenue recognition for the company can only occur as the service is provided. So if a person orders a $600 service at the beginning of a month, revenue will be recognized at $100 for the next 6 months. I'm trying to create an Excel Waterfall chart which will show the monthly revenue recognition amounts for all orders depending on the date which they were ordered.

I've attached a sample of what I'm looking to do. It's become tricky for me because Revenue Recognition is pro-rated based on the date ordered (i.e. order on the 20th of a month so at the end of the month 1/3 of the month is recognized as revenue). I'm looking for something that will populate the percentage of the order amount, each month, that will be recognized. I've populated what row 3 should be, but there doesn't seem to be an easy way to apply a formula or something across all cells.

View 2 Replies View Related

Revenue Rank & Date Calculations

Mar 4, 2009

I need to work out Revenue Rank & Year to Date calculations.

Consider a simple table:

| Partner Name | Year | Month | Revenue |
------------------------------------------
| John Smith | 2008 | Nov | 2000 |
| John Smith | 2008 | Dec | 2200 |
| John Smith | 2009 | Jan | 1898 |
| Mary Smith | 2008 | Nov | 1767 |
| Mary Smith | 2008 | Dec | 1867 |
| Mary Smith | 2009 | Jan | 1953 |
------------------------------------------
etc..etc...

I'm not using Pivot Tables since there are more complex issues around presentation which are preventing me doing this so are using good old formulas..

Revenue Rank is in reference to the Partner in this case. I need to be able to say John Smith is rank x out of xx by summing up his revenues for both:

a) one month
b) a range of 3 months back

How do I work this out? Especially the date calculations when I just have a year and month in separate fields?

View 9 Replies View Related

Extrapolating Revenue Over Various Time Periods

Sep 27, 2007

I have a spreadsheet that holds a list of customers and the contracts they have with my company - this sheet includes the Total Contract Value in £s - so how much each customer will pay us for the service - the period of the service - so the start date of 01/01/08 to end date of 31/12/08 for example. What I then have is all the months across the top of my spreadsheet and I need to extrapolate the contract value, based on the period between the months.

Initially I had complicated formulas that simply divide the value by the number of months of the contract - however, my company has since changed the policy and requires it to be done to the day.

For example, if the value was £12,000 and the period was 12 months from 01/01/08 - to calculate January 08 it would be - 12,000 / 365 * 31, Feb would be 12,000 / 365 * 29 and so on...

Does anyone know how I can do this - bearing in mind that each contract won't be as easy as 12 months - it may be start date of 15/06/08 to 08/10/10 for example... If anyone can help me do a formula or formulae to calculate the value for each month - I would be very very grateful - as always... [/img]

View 9 Replies View Related

Calculating Revenue Received Vs Owed

Aug 23, 2008

I have created a model that shows me the money that I am owed each month. However, I receive the money over a 3 month period.

Using a formula I need to determine how much I actually receive in total each month, factoring in that I receive each months revenue in three equal payments over three months.

For example

Month 1 Month 2 Month 3 Month 4 Month 5 Month 6
$A $B $C $D $E $F

In month 1, I am owed $A, but this payment will be split over 3 months.

So in month 1 I collect $A/3. In month 2, I am owed $B but this payment will also be split over 3 months so in month 2 I collect ($A/3 + $B/3), etc etc. In month 3 I collect the ($C/3) + ($B/3) + (last payment of $a/3) etc etc

How do I present this in a formula so I dont have to adjust every single column manually?

I need to follow the same structre for another scenario using 18 months as well.

View 9 Replies View Related

Figure Out How To Interpolate Revenue Values

Nov 7, 2008

I have a question on data interpolation with Excel 2007. Normally, this wouldn't be too much of an issue for me, but for some reason I cannot figure it out.

I'm working on an Income Statement, which is designed for 5 years. I have values 1 and 5, which are given to me (B7: 3,500,000 and F7: 5,200,000). I'm trying to figure out the other 3 years of revenue assuming a growth trend. The values should fill the series B7:F7.

View 9 Replies View Related

Macro To Set The Order In Which Worksheets Should Be Printed (order Is Changing Daily)

Nov 29, 2008

I looked at threads realted to printing but wasn ot able to find something similar to what I need. So here is my problem:

I have a file with more than 100 worksheets (each sheet contains the invoice for one store). I would like to create a macro that would enable me to determine the order in which worksheets would be printed. How to do it?

Idea #1: the printing order would be based on the value in cell L1 that would contain the route number for each store. Stores belonging to the same delivery route will have the same value in L1. So, the macro should first print all sheets with 1 in cell L1, then print all sheets with 2 in cell L1 and so on...

Idea #2: Creating a separate data sheet with the list of all stores and their corresponding route number. Let's say info is contained in range A1:B150, where Column A contains the name of the stores and column B contains the route numbers. The macro then should look at that list to determine the printing order of the subsequent worksheets (the name of the store in column A would be the same as the name of the worksheet corresponding to that store).

Idea #3: sorting my 150 worksheets manually. It does not solve my problem fully, though, because stores do not always belong to the same route. So the manual sorting should be carried out daily and would not save time at all.

View 9 Replies View Related

Revenue Allocation Using Combined/Nested IF Statements

Jul 24, 2008

I have been asked to go through some information which has over 200 000 lines, what I need to do is as follows:

where order number is unique, revenue source = "Unique"
where order number appears more than once, check division to see if it appears in more than one division, if it does revenue source = "Cross Selling", if it does not then revenue source = "Divisional Package"

I need all of the above in formula line which will be inserted in the revenue source column

I have attached the file with a sample of the information I am using.

View 9 Replies View Related

Re-Order Columns Based On Column Order Of Another Worksheet

Mar 1, 2008

I need a way to re-order an excel worksheets columns based on another worksheet.

Data is extracted from a database into excel however users can configure the columns in the initial system. to how they like This causes problems when the data is copied into an excel spreadsheet I have created as the data copied will not be in the same column order as is required.

How can i reorder the columns without physically having to cut and paste the columns to match?

I have attached a sample spreadsheet.

You will see on the spreadsheet that 'fixed columns' is the order that i require the data however 'variable columns' is not in the same order.

View 3 Replies View Related

Conditional Formatting - Calculate The Numbers Of Month And The Revenue?

May 5, 2014

i wish to do some conditional formatting. my target for the first 6 months from date activated is 50,000 after 6 months is 100,000. and for those below target, i will need it to be highlighted in red. thus i have 2 sets of conditions.(calculate the no. of months and the revenue).

View 2 Replies View Related

How To Add Total Revenue And Cost For Each Product And Overall To Pivot Table

Aug 5, 2014

Pivot_example.jpg

Regarding the attached pivot table screen shot, I would like to be able to add total revenue and cost for each product and overall to this pivot table. IOW, instead of just showing the net amount of 3,200 for all blenders, I would like it to show Revenue of 12,500, Cost of (9,300), and the net amount of 3,200 for all blenders (i.e., for Boise and Chicago combined), in addition to the totals for each of the two plants. Also would like to see total revenue, cost, and net for all products and plants combined at the bottom. Can this be done?

View 4 Replies View Related

Formula Showing Revenue Recognition Based On Days And Months

Mar 15, 2014

I know I will earn $5,000 of monthly revenue from a client. $5,000 is represented in a monthly revenue cell. I have 12 columns showing the 12 months of the year. There is an additional cell showing the customers implementation date.

If a company's implementation date is on or after the 15th of the month (example: 3/28/2014) then the next month (April 2014) is skipped and the $5,000 is returned to columns May through December. All months prior to May return $0.00. If the implementation date is before the 15th day of the month (example: 3/13/2014) then the next month (April 2014) and all months after will return $5,000. All months including March and prior must return $0.00. If the implementation date is unknown then 12/31/2099 would be in the implementation date cell and $0.00 is returned for all 12 months.

Essentially, if the implementation date is prior to the 15th of the month the revenue will show as of the following month. If the implementation date is on or after the 15th of the month the revenue skips the following month and will show the month after.

View 6 Replies View Related

Spread Revenue Equally Over 6 Or 12 Months Depending On Which Product Is Sold

Jul 15, 2014

We have 5 - six month programs and five - 12 month programs we are going to sell; each have a different price. I Want to insert number of projected sales manually for each month and then have excel distribute/spread revenue evenly over six or twelve months into a separate set of cells. First payment would be received at time of sale.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved