Writing Vlookup Into VBA Code
Aug 15, 2007
I need help writing the VLookup function into a VBA macro.
I currnetly have a macro that generates a list of companies in column D on Sheet1. There could be a different number of rows populated every time the macro runs.
I also have a list of all the possible companies next to their e-mail address on Sheet2 (company in column A, corresponding e-mail in column B).
I know Vlookup can search sheet2 and populate the correct e-mail address on sheet1, but I want a VBA solution in which it will automatically see how many rows of companites I have, perform Vlookup for each company, and place the corresponding emails in sheet1, column E.
View 9 Replies
ADVERTISEMENT
Aug 29, 2007
I've written a piece of code that is so long, I have to use the scroll bar to see the whole of it, which isn't very user friendly
if there's a way of splitting long lines of code over say 2 or 3 lines, so I can read the whole thing without having to use the scroll bar? I've noticed some people use _ at the end of the code and then continue writing on the next line, but when I do this, I get an error message saying
"Compile Error : Expected : line number or label or statement or end of statement"
View 9 Replies
View Related
Mar 4, 2008
I got some code from an old discussion thread
Sheets("Reference").Select
Range("d9").Select
Range(Selection, Selection.End(xlDown)).Select
Range(Selection, Selection.End(xlToRight)).Select
Dim myBorders() As Variant, item As Variant
myBorders = Array(xlEdgeLeft, _
xlEdgeTop, _
xlEdgeBottom, _
xlEdgeRight, _
xlInsideVertical)
View 9 Replies
View Related
Oct 9, 2006
Does Excel handle formulas written into the VBA code quicker than just writing out the calculation in VBA?
I have a section where I use the following formulas, sumif, countif and a combo if iserror sumproduct in the VBA code...runs rather slow at this point and was looking at a way to speed things up.
View 9 Replies
View Related
Apr 27, 2006
See the attached Workbook, which explains the problem easier.
View 9 Replies
View Related
Oct 11, 2013
writing a code where i can copy a worksheet (Sheet1), insert a new worksheet at the END (as the last worksheet), and paste to that new worksheet (which will have a different name each time a new one is added). I am using the code below, but it adds a worksheet after Sheet1 instead of at the end, and it also adds another weird worksheet that says "Dim Worksheet" in one cell, and "Set newsheet = Sheets.Add(After:=Sheets(Worksheets.Count), Count:=1, Type:=xlWorksheet)" in another. This is not in the VBA window, it is just text in a cell in another inserted worksheet. I only want one worksheet added at the end that I can paste too (knowing that the inserted sheets will always have new names).
Code:
Sub CreatePercentageSheet()
ActiveWorkbook.Sheets("Sheet1").Copy _
After:=ActiveWorkbook.Sheets("Sheet1")
ActiveWorkbook.Sheets.Add After:=Worksheets(Worksheets.Count)
ActiveSheet.Paste
End Sub
View 2 Replies
View Related
Aug 11, 2009
I have a spreadsheet that will contain about 5-15 rows with a letter "S" in the column. If this letter S appears in the column, I need its entire row to change font color to RED and then change that row's value in column L to a negative number. is there any easy way to do this?
View 14 Replies
View Related
Oct 4, 2009
I need a vba code for a VlOOKUP:
when I tryed to record I got this code :
View 4 Replies
View Related
Oct 13, 2007
Does anyone know the corespondant macro code for the formula =R2-VLOOKUP(M2;C:H;6;FALSE) and =Q2-VLOOKUP(M2;C:H;5;FALSE) ? The results are displayed in the same row in column X for the first formula, and in column W for the second formula. I would like the corespondant macro to apply to the entire sheet. And there's another catch...the data that the formulas apply is in fact a Web Query...and I need that the macro to recalculate every time the Web Query refreshes.
View 3 Replies
View Related
Jan 7, 2014
I have a worksheet where I want to have one column of state abbreviations (entered by the user), and a second column of state-specific information that will be entered from a lookup table--named "StatePrefixes". Here is my code so far:
VB:
Public Sub cmdSelectState_Click()
Dim St As String
St = ActiveCell.Value
ActiveCell.Offset(0, 1).Value = Application.WorksheetFunction.VLookup(St, StatesPrefixes, 2, False)
End Sub
As is the code is generating a run-time error "Unable to get the Vlookup property of the WorksheetFunction class. If I remove the reference to the WorksheetFunction class I then receive a value of "#N/A" in my worksheet.
View 4 Replies
View Related
Feb 4, 2014
I have a workbook containing 2 sheets called ('EPM Extract' and 'Sheet B'). Column 'B' of the 'EPM Extract' sheet contains a list of Project IDs (numerical), and 'Sheet B' also contains a list of Project IDs (also in column B), plus all of the additional data I require.
Now, from the required cell within the 'EPM Extract' sheet, the normal Excel the code would read as =vlookup(B3,'Sheet B'!B5:W32,11,False), upon which I would drag down the code from that cell to all other required cells below. However, these are my issues:
* How do I even begin to write the code within VB, as I know that variables and arrays have to be set
* I need to apply the vlookup across 12 columns as I am bringing back 12 different results (i.e. I need to copy results from column counts 11 to 22 from 'Sheet B' to columns in 'EPM Extract' sheet.
*The amount of data in the sheets will vary each month, so I need to know how to apply the code only to the amount of rows in the 'EPM Extract' sheet, so some kind of R1C1xl.UP will need to be defined also.
View 9 Replies
View Related
Jun 3, 2009
Right now i have two worksheets:
"900 - Reel"
"OverRides"
On the "900 - Reel" sheet i have a userform ("userform4") open when double clicking a specific cell. Upon opening it uses the following code to go to sheet "OverRides" to find two specific values and imputs them into "textbox1" and "textbox2" on "userform4"
View 4 Replies
View Related
Jun 14, 2008
The code instead of Vlookup that I'm using at the moment. It takes too long if you have 40,000 to 50,000 rows of data.
The data that I have is something like the sample bebow:
Col A from A1 to A15 with numbers like:
20000000
20000001
20000002
20000003
20000004
20000005
20000006
20000007
20000008
20000009
20000010
20000011
20000012
20000013
20000014
Col C from C1 to C10 with numbers like:
20000000
20000001..............................
View 9 Replies
View Related
Nov 9, 2006
I am trying to use vlookup in vba but i receive an error '1004' "Unable to get the VLookup property of the Worksheetfunction Class". I need a way around this. I have ID numbers in the first column and I am trying to input the name of the table it corresponds to in column "O". I have 4 different tables. I am using For Each cell in Selection to go through every cell by using If statement along with VLookup. As soon as the function is forced to go to the next IF selection, it gives me the error.
Range("O3:O" & myCount + 2).Select
For Each cell In Selection
If IsEmpty(cell) Then
If cell.Offset(0, -14) = Application.WorksheetFunction.VLookup(cell.Offset(0, -14), _
Workbooks("Warehouse Inventory"). Sheets("TWGReports").Range("$a$2:$z$1000"), 1, False) Then
cell.Value = "TWG Facility"
If cell.Offset(0, -14) = Application.WorksheetFunction.VLookup(cell.Offset(0, -14), _ .....................
View 3 Replies
View Related
May 7, 2008
convert this formula to VBA.
The are four formulas in there:
1. lookup formula.
2. remove the 1st number (exmaple: remove 0 in 0123 to become 123)
3. add a number (example: add 0 to 123 to become 0123)
4. convert a number into text format.
View 3 Replies
View Related
Apr 1, 2014
I tried to show pictures according to numbers code in my list on the sheet 2, during the xploring of web i saw some examples with vlookup and data validation functions.
View 5 Replies
View Related
Jul 20, 2009
I am using the Vlookup function to find a particular code in one sheet then give me the cost data that is associated with that code and put it into a similar cell in another sheet. It will work fine if I use (for example) A2 to E39 as my table_array. This would be fine if I only had 38 rows of data to look for the code on. However I have thousands of rows of data that need to be checked. Therefore when I change the table array to anything greater than E40, the vlookup will not work and it will only return a value of zero instead of the actual cost data. This is very weird and does not make sense that anything is wrong.
The only thing I can think of is that the vlookup function has a limit on the number of rows that it can look for data in. However, I did not think that it had a limit at all.
View 7 Replies
View Related
Jul 8, 2014
I have 3 files out of which Inv.txt is the main file.
I would like that the other two files get opened and the the number in column 3 gets vlookup in the file 20140701 Inv.txt and it adds the data from 20140701 INv.txt column 7 to the last column in INv.txt.
I would like that the other two files get opened and the the number in column 3 gets vlookup in the file 20140701 Inv.txt and it adds the data from 20140701 INv.txt column 7 to the last column in INv.txt.
I would like that the other two files get opened and the the number in column 3 gets vlookup in the file 20140617 Inv.txt and it adds the data from 20140617 INv.txt column 7 to the last column in INv.txt.
I would like that the other two files get opened and the the number in column 3 gets vlookup in the file 20140617 Inv.txt and it adds the data from 20140617 INv.txt column 7 to the last column in INv.txt.
The two file names that it looks up from are always with a date stamp (Current date-6 Days) so this needs to be dynamic.once it has all the data in Inv.txt just save the file.
View 1 Replies
View Related
Oct 31, 2011
I have 1 file with 2 worksheets, MR and MR (ytd). I want to write 1 procedure for a report to lookup the container no at MR from MR (ytd), then return the date.
Now I just use the formula vlookup to do this function.
=IF(ISERROR(VLOOKUP($B5,'MR (ytd)'!$B$5:$O$805,14,0)),"0",VLOOKUP($B5,'MR (ytd)'!$B$5:$O$805,14,0)+$B$2-'MR (ytd)'!$B$2)
I have write up some code for it. But find it is cannot lookup.
Code:
Sub mrdays()
Dim mrrecords As String
Dim i As Integer
Dim to_date As Date
Dim lsrpdate As Date
With Sheets("MR")
[Code] .........
View 3 Replies
View Related
Oct 10, 2013
I have 2 sheets, sheet2 have data consist of 5 columns I want to vlook up by vba code so the data from sheet2 with reference here is (ID) search in sheet1 and update the data from sheet 2 to sheet 1 like below. i have found a similar code but it updates only one column that is B cloumn i want to update C, D, E columns and rows by the below code. see the below code.
Sheet 2
Id, beginning, principal, interest, endbalance
123, 10000, 1000, 50 , 9000
789, 8000 , 400 , 150, 7600
245, 5000 , 1000, 200 , 4000
456, 4000 , 1000, 1000 , 3000
789, 2500 , 500 , 100 , 2000
Sheet1
id beginning principal interest endbalance
123 10000
789 8000
245 5000
456 4000
786 2500
Ifound below code suitable for the above query but this is only execute column b , I want to execute c, d, e columns how can I do this.
Sub ADDCLM()
On Error Resume Next
Dim Dept_Row As Long
[Code]....
View 8 Replies
View Related
Feb 13, 2009
I'm trying to write a VBA code to automatically update using a vlookup but I seem to be running into trouble, partically with the lookup value part of my vlookup. I basically have a range of dates in column B and want the values to appear in column C. Yes, I know I just type the forumla in column C and drag it down, but I really need to do it in VBA, as I want this to update when additional dates are added.
This is what I have thus far. The code keeps looping at i = i +1 and doesn't stop unless interuppted.
Sub update()
Dim i As Integer, L() As Range, s As Integer, V As Double
Sheets(1).Activate
s = Range("D:D").Select
On Error Resume Next
While s ""
i = i + 1
ReDim Preserve L(i To 1)
L(i) = s
Wend
If i = 0 Then
MsgBox "No dates found"
End If
Exit Sub
For i = 1 To UBound(L)
V = WorksheetFunction.VLookup(s, Range("Inputs"), 2, 0)
Next i
End Sub
View 9 Replies
View Related
May 24, 2007
I wrote this code today and it works - sometimes. Really it only seems to work when I have one of the sheets(zvur013) is in focus (ie, it was the last sheet to have been tabbed to). I dont understand what I'm missing, please help.
Sub lookforitems()
Dim items()
Dim groupnums()
Application. ScreenUpdating = False
Set allitems = Workbooks("zvur013.dbf").Sheets("zvur013")
Set allgnums = Workbooks("Groupnumbers.xls").Sheets("sheet1")
Countgroups = Application.WorksheetFunction. CountA(allgnums.Columns(1))
countitems = Application.WorksheetFunction.CountA(allgnums.Rows(1))
...........................
allgnums.Cells(j + 1, i + 2).Value = x
Debug.Print x
Next j
Next i
End Sub
View 9 Replies
View Related
Mar 18, 2008
Is it possible to Call the inbuilt Excel Functions (like VLOOKUP) in Macros. we have to pouplate cells with formula which uses VLOOKUP. one way was to update each cell with required Formula like: [code] Range("A1").value = " = 6*F7*(1-Vlookup(lookupvalue........))"[code] but this was stupid as no of cell to be populated was large and variable and moreover it will return formulae to cells rather than fixed value. What we tried was to defile an table_array as Array(x y) and then use this array to return required VLOOKUP value. However I was thinking is there any way to call function like VLOOKUP in Macros so that we can return a value to cell rather than formula.
View 3 Replies
View Related
Jun 18, 2008
I'm trying to look up a value in Analytics Data searchin for the date in B9 to B & rader.
I get error messages, because i can't find the dates. But I'm sure I have defined the ranges correct. The code works in another workbook with the difference that the table with the variables I'm trying to lookup are in the same sheet as the where I want to place them.
Private Sub Upd1_Click()
Dim rader As Double
Dim lookrng As range
Dim updvalue0 As Double
Dim updvalue1 As Double
Dim updvalue2 As Double
Dim updvalue3 As Double
Dim updvalue4 As Double
Dim updvalue5 As Double .........
View 9 Replies
View Related
Mar 29, 2014
In the sample i have list of codes,also i have picture according this codes: Can i somehow conected pictures and codes? My pictures are in jpg form,can i insert them into cell,where picture should has form as cell has.
When the code from the Data sheet in cell A2 sheet 1,than show the picture conected with this code in Data sheet.
View 2 Replies
View Related
Jan 15, 2009
I am wondering if there is an easier way to look up values in a matrix. I use the VLOOKUP with the vertical values as the lookup_value, then another lookup for the col_index_number to find the horizontal values. The example in the attached file is just a sample of my spreadsheet. I need to apply this to a roughly 10*10 matrix (which changes every now and then) and apply this matrix to over 1,200 rows. Is there an easy way to returne theses values or is the way I am currently doing it the best option.
View 3 Replies
View Related
Jun 7, 2006
i have this super huge worksheet im working with and im trying to insert a vlookup forumla at the first blank cell at the end of each column. for some reason when i tried:
Range("B" & lastrowB + 1).FormulaR1C1 = "test"
it worked but.. when i tried
Range("B" & lastrowB + 1).FormulaR1C1 = "=VLOOKUP(A2435,[tmp.xls]vRptMOMarkToHedgeFacilities!$A:$BF,7,0)"
it didn't work. giving me an error on that line stating: Run-time error '1004': Application-defined or object-defined error.
View 6 Replies
View Related
Aug 23, 2008
I have the following vlookup working exactly as I want it to in excel: =IF(ISNA(VLOOKUP(LEFT(C2,10)& "*", NAME,2,FALSE)),"",(VLOOKUP(LEFT(C2,10)& "*",NAME,2,FALSE))) -NAME is a defined section on another worksheet
The problem I have is when I come to use this within a vba macro I'm writing the wildcard section automatically gets spaces added so it goes from "*" to " * " and excel doesn't like it! The code I'm using to write it into the cell is simply:
ActiveCell.FormulaR1C1 = _
"=IF(ISNA(VLOOKUP(LEFT(c2,10)& " * ",NAME,2,FALSE)),"",(VLOOKUP(LEFT(c2,10)& " * ",NAME,2,FALSE)))"
how to stop the spaces being added?
View 2 Replies
View Related
Jun 18, 2009
Example6.xlsx .i just cant remember what it is im meant to be using as i havnt done it since school. basicly on the attached spreadsheet, there are 2 tabs. the common column is Contract number, if the data in the contract number column matches then i need the figures for 20/40/TEU to show against the Special aggreement by code tab.
View 3 Replies
View Related
Mar 14, 2013
how to write vba code using vlookup formula insert pic from picture folder
View 5 Replies
View Related
