VLookup - VBA Macro Code For More Than One Column?
Oct 10, 2013
I have 2 sheets, sheet2 have data consist of 5 columns I want to vlook up by vba code so the data from sheet2 with reference here is (ID) search in sheet1 and update the data from sheet 2 to sheet 1 like below. i have found a similar code but it updates only one column that is B cloumn i want to update C, D, E columns and rows by the below code. see the below code.
Is it possible to Call the inbuilt Excel Functions (like VLOOKUP) in Macros. we have to pouplate cells with formula which uses VLOOKUP. one way was to update each cell with required Formula like: [code] Range("A1").value = " = 6*F7*(1-Vlookup(lookupvalue........))"[code] but this was stupid as no of cell to be populated was large and variable and moreover it will return formulae to cells rather than fixed value. What we tried was to defile an table_array as Array(x y) and then use this array to return required VLOOKUP value. However I was thinking is there any way to call function like VLOOKUP in Macros so that we can return a value to cell rather than formula.
I'm trying to look up a value in Analytics Data searchin for the date in B9 to B & rader.
I get error messages, because i can't find the dates. But I'm sure I have defined the ranges correct. The code works in another workbook with the difference that the table with the variables I'm trying to lookup are in the same sheet as the where I want to place them.
Private Sub Upd1_Click() Dim rader As Double
Dim lookrng As range Dim updvalue0 As Double Dim updvalue1 As Double Dim updvalue2 As Double Dim updvalue3 As Double Dim updvalue4 As Double Dim updvalue5 As Double .........
I have the following vlookup working exactly as I want it to in excel: =IF(ISNA(VLOOKUP(LEFT(C2,10)& "*", NAME,2,FALSE)),"",(VLOOKUP(LEFT(C2,10)& "*",NAME,2,FALSE))) -NAME is a defined section on another worksheet
The problem I have is when I come to use this within a vba macro I'm writing the wildcard section automatically gets spaces added so it goes from "*" to " * " and excel doesn't like it! The code I'm using to write it into the cell is simply:
I am trying to use VB to vlookup between to workbooks 1. Make active workbook WBK1 2. Make workbook being open WBK2 3. Copy and Paste between WBK1 and WBK2 4. Have a vlookup in WBK1 and bring in the values from WBK2 5. Close WKB2 6. Copy, Paste, and transpose values in wkb1 within wkb1
The script works fine until it reaches the vlookup step. I have used the vlookup by itself without the copy and paste code successfully but when I combine the two it provides me with the error 9. Subscript out of range.
I'm trying to use an offset from a Named Range as my source cell in a vlookup but get a -1004 Object not defined error. When Debugged the Range.Formula appears to be blank when queried. Using Record a Macro the Reference to a named range worked fine but I could not test for an offset or the use of the range reference. What can I do to use to make this work
my existing macro, as the run takes to much time to complete. (at least 20min) I've already tried several loops, but no one worked for me. Following situation: There are two excel files, entries in column 73 - 85 will be copied from WorkbookRust to the other workbook if the numer in column 5 is the same. Not every cell within this columns contains data, so the macro should automatically jump to the last entry in each of the above mentioned columns, instead of predefine the range as you see in the code below. After the data is copied to the other workbook, it will be filtered acc. to Sub FilterMain and then copied back to WorkbookRust. As already said, the whole thing works, just to lame.
Sub Allmacros() Dim WorkbookRust As String WorkbookRust = ActiveWorkbook.Name ChDir "C:Documents and Settings vogtMy DocumentsRüstplausch" Workbooks.Open Filename:= _ "C:Documents and Settings vogtMy DocumentsRüstplauschCH_Revenue_2008.xls" Sheets("Main_Overview").Select Windows(WorkbookRust).Activate Application.run ActiveWorkbook.Name & "!UpdateEntries" Application.run ActiveWorkbook.Name & "!FilterMain" 'not ask to overwrite existing file Application.DisplayAlerts = False Workbooks("CH_Revenue_2008.xls").Save Workbooks("CH_Revenue_2008.xls").Close End Sub
i need to group the values based on A, B, C columns.
which means all "Chickpea_B-1_11area_3d.csv " will have same timestamp and mean_area_3d values, only D column vlaue changes.....
in the same way, all "Chickpea_B-1_12area_3d.csv" will have same timestamp and mean_area_3d values, only D column vlaue changes.....
now i need all Chickpea_B-1_11area_3d.csv values to be grouped into one. and chickpea_B-1_12area_3d.csv values to be grouped into one..
if you see the output sheet, you will understand clearly, which i did manually for your easy understanding...
i did manually and also attached the sheet for your kind reference and easy understanding... where i grouped all Chickpea_B-1_11_area_3daver_domain_area, fill_factor, leaf_angle_theta, plantHeight, projected_leaf_a into one.... where b and c cols are same for all the D E F G H I Values. in the same way for Chickpea_B-1_12_area_3d and all other below values to be grouped.
like this i have to do for 1000 files. please find the attachment...
Attached is my sample data Sample Data_Combine Sheets.xlsm.
What the code in the attached sheet does is that it combines the data in Sheets Set1 and Set2 into the worksheet named "Combine".
Both input sheets share same columns. Code I use is as below:
VB: Sub BuildPivotData() Dim wrsht As Variant Dim i As Integer
Sheets("Combine").Range("A2:AI500").Clear wrsht = [{"Set1", "Set2"}] For i = 1 To UBound(wrsht) Sheets(wrsht(i)).[a2].CurrentRegion.Offset(1).Copy Sheets("Combine").Range("A65536").End(xlUp)(2) Next i End Sub
I want to amend the output in such a way that when the macro is run , in the "Combine" worksheet an additional column is added at the start(col A) with header as "Category".
The category should be nothing but the input Sheet name i.e Set1 or Set2.
The code I have below is relevant to this spreadsheet Copy of Invoice test.xlsm
In the code below I marked the script that has issues in red. The code takes the last row and the last column and works from there. This works fine with single commands, however, when I take a cell (based off the last row and the last column) and try to give that cell multiple commands excel sends back an error. When I use this multiple command (see part of code that is marked in red) for a range that is not based off the last column it works fine.
I need an easy code that searches all of column A and deletes the entire row if the cell has the value "-". It needs to find the last row of data using something like LastRow = Range("A" & Rows.Count).End(xlUp).Row
I am trying to clean up and simplify my macros by compartmentalizing frequently repeated commands. I like to search for text in column headings and define the cell containing it as a range that I can later use .column or .row commands on, so my macros are a bit more flexible. The code I currently use for this is
Dim XColumn As Range ‘the cell containing the text “X” Cells.Select Selection.Find(What:="X", After:=ActiveCell, LookIn:=xlFormulas, _ LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _ MatchCase:=False, SearchFormat:=False).Activate Set XColumn = ActiveCell
I would like to be able to create a Macro (possibly name FindSetCell()) that will accept arguments and achieve the results of the above code in other macros I think the command might look something like FindSetCell(“text to be searched for”,”name of newly Defined Range”) But I have not figured out how to code it
I have a spreadsheet that has two different data sources (i.e., A and B). The amounts of these data sources (i.e., the number of columns) varies from sheet to sheet. I have to calculate the averages of these data sources independently and together. Because this data is spread across twenty or more spreadsheets, these calculations can be time-consuming. I want to do the following: 1. Locate the last occurrence of the first data source "A" in row and then insert a column after that cell. 2. In that cell, I want to get the average of each data source for each row of data (i.e., there are always 19 rows of data). I want to do the same two steps for the second data source "B". Then, I want to insert a column after the "B" average and this column will be used to get an average of each row of data from A and B together. Please keep in mind that the number of data sources for A and B varies from sheet to sheet. So far, I am working on code to try to " find" the text in a range (i.e., find the last instance of "A"), but I cannot figure out how to get it to get it to stop at the last occurrence and then insert a column. I have some ideas about how to calculate the average, but any of yours are much appreciated. Also, the row with the type of data (i.e., A or B) is named because this function is part of a larger macro. Therefore, it is relatively easy to get to it. I have attached a version of the file that displays how I want it to look. The code I have thus far is:
Is this possible using code: Copy Cell A1 and Paste in first empty Cell down Column D. This would be connected to a command button. Both Cell A1 and Column D are on the same spreadsheet.
Does anyone know the corespondant macro code for the formula =R2-VLOOKUP(M2;C:H;6;FALSE) and =Q2-VLOOKUP(M2;C:H;5;FALSE) ? The results are displayed in the same row in column X for the first formula, and in column W for the second formula. I would like the corespondant macro to apply to the entire sheet. And there's another catch...the data that the formulas apply is in fact a Web Query...and I need that the macro to recalculate every time the Web Query refreshes.
I'm trying to write a VBA script which will delete all rows in my Excel spreadsheet where Column I (which contains a status code) does not contain the word "Completed".
At the moment, I'm doing this the other way round: my script is able to search for entries in Column I which contain the status codes "Pending", "Awaiting Authorisation", "In Progress" etc and delete them. The idea is that when all those rows are deleted, I'll only be left with rows which have a status of "Completed". This works fine at the moment. However, the concern is that if a brand new status code is added to the data file, my script would be unable to pick it up and delete it. This is a small sample of the code I'm currently using (which deletes all the rows with statuses other than Completed):
I have a worksheet where I want to have one column of state abbreviations (entered by the user), and a second column of state-specific information that will be entered from a lookup table--named "StatePrefixes". Here is my code so far:
VB: Public Sub cmdSelectState_Click() Dim St As String St = ActiveCell.Value ActiveCell.Offset(0, 1).Value = Application.WorksheetFunction.VLookup(St, StatesPrefixes, 2, False) End Sub
As is the code is generating a run-time error "Unable to get the Vlookup property of the WorksheetFunction class. If I remove the reference to the WorksheetFunction class I then receive a value of "#N/A" in my worksheet.
I have a workbook containing 2 sheets called ('EPM Extract' and 'Sheet B'). Column 'B' of the 'EPM Extract' sheet contains a list of Project IDs (numerical), and 'Sheet B' also contains a list of Project IDs (also in column B), plus all of the additional data I require.
Now, from the required cell within the 'EPM Extract' sheet, the normal Excel the code would read as =vlookup(B3,'Sheet B'!B5:W32,11,False), upon which I would drag down the code from that cell to all other required cells below. However, these are my issues:
* How do I even begin to write the code within VB, as I know that variables and arrays have to be set
* I need to apply the vlookup across 12 columns as I am bringing back 12 different results (i.e. I need to copy results from column counts 11 to 22 from 'Sheet B' to columns in 'EPM Extract' sheet.
*The amount of data in the sheets will vary each month, so I need to know how to apply the code only to the amount of rows in the 'EPM Extract' sheet, so some kind of R1C1xl.UP will need to be defined also.
Right now i have two worksheets: "900 - Reel" "OverRides"
On the "900 - Reel" sheet i have a userform ("userform4") open when double clicking a specific cell. Upon opening it uses the following code to go to sheet "OverRides" to find two specific values and imputs them into "textbox1" and "textbox2" on "userform4"
I need help writing the VLookup function into a VBA macro.
I currnetly have a macro that generates a list of companies in column D on Sheet1. There could be a different number of rows populated every time the macro runs.
I also have a list of all the possible companies next to their e-mail address on Sheet2 (company in column A, corresponding e-mail in column B).
I know Vlookup can search sheet2 and populate the correct e-mail address on sheet1, but I want a VBA solution in which it will automatically see how many rows of companites I have, perform Vlookup for each company, and place the corresponding emails in sheet1, column E.
The code instead of Vlookup that I'm using at the moment. It takes too long if you have 40,000 to 50,000 rows of data.
The data that I have is something like the sample bebow:
Col A from A1 to A15 with numbers like: 20000000 20000001 20000002 20000003 20000004 20000005 20000006 20000007 20000008 20000009 20000010 20000011 20000012 20000013 20000014
Col C from C1 to C10 with numbers like: 20000000 20000001..............................
I am trying to use vlookup in vba but i receive an error '1004' "Unable to get the VLookup property of the Worksheetfunction Class". I need a way around this. I have ID numbers in the first column and I am trying to input the name of the table it corresponds to in column "O". I have 4 different tables. I am using For Each cell in Selection to go through every cell by using If statement along with VLookup. As soon as the function is forced to go to the next IF selection, it gives me the error.
Range("O3:O" & myCount + 2).Select For Each cell In Selection If IsEmpty(cell) Then If cell.Offset(0, -14) = Application.WorksheetFunction.VLookup(cell.Offset(0, -14), _ Workbooks("Warehouse Inventory"). Sheets("TWGReports").Range("$a$2:$z$1000"), 1, False) Then cell.Value = "TWG Facility" If cell.Offset(0, -14) = Application.WorksheetFunction.VLookup(cell.Offset(0, -14), _ .....................
I want to get value from reference one column and return value by corresponding row from another column. This can be done by vlookup column. But it find value from 1st column and return value from given relative column. That mean find from Left column and return value from right side given column number.
But I want find from Given column number and return value from given left column. For Further detail see the Attached file.
In the first vlookup it picks up a value. I need to do the same vlookup function but it should also pick up another value in column 9 and should add value in column 7 and 9 and return it. Employee id numbers are in column E in the first page.My formula checks for the employee id in Su sheet and retrieves the value from the seventh column. I need to retrieve also from 9 th column and add them together.
