Add Nested ISNA & VLOOKUP With Wildcard Via Macro Code

Aug 23, 2008

I have the following vlookup working exactly as I want it to in excel: =IF(ISNA(VLOOKUP(LEFT(C2,10)& "*", NAME,2,FALSE)),"",(VLOOKUP(LEFT(C2,10)& "*",NAME,2,FALSE))) -NAME is a defined section on another worksheet

The problem I have is when I come to use this within a vba macro I'm writing the wildcard section automatically gets spaces added so it goes from "*" to " * " and excel doesn't like it! The code I'm using to write it into the cell is simply:

ActiveCell.FormulaR1C1 = _
"=IF(ISNA(VLOOKUP(LEFT(c2,10)& " * ",NAME,2,FALSE)),"",(VLOOKUP(LEFT(c2,10)& " * ",NAME,2,FALSE)))"

how to stop the spaces being added?

View 2 Replies


ADVERTISEMENT

Isna (vlookup)

Jul 17, 2009

I use the following formula. It works except it returns "0" if the field is blank. What alternate formula can I use that will return blank instead of zero if the field is blank?

=IF(B3="","",IF(ISNA(VLOOKUP(B3,Customers!$A$2:$L$1502,5,FALSE)),IF(ISNA(VLOOKUP(VALUE(B3),Customers!$A$2:$L$1502,5,FALSE)),"",VLOOKUP(VALUE(B3),Customers!$A$2:$L$1502,5,FALSE)),VLOOKUP(B3,Customers!$A$2:$L$1502,5,FALSE)))

View 9 Replies View Related

ISNA And Vlookup (get Data From Another Tab)

Oct 20, 2008

I'm trying to get data from another tab, but only if it is greater than or less than a certain number. Here's what I'm using but doesn't seem to work.

=IF(ISNA(VLOOKUP(A13, 'Aim MTD'!A2:T63, 5, FALSE)),">=22.00%",VLOOKUP(A13, 'Aim MTD'!A2:T63, 5, FALSE))

A13 is targeting the name of the person
Aim MTD is the sheet tab the info is in

And I want to select the information only if the cell value is 22% or greater. If the cell value is less than 22%, I don't want it to read or to read zero. I'm not an excel expert (yet), but hope to be one day!

View 5 Replies View Related

Trying To Do VLOOKUP ISNA Formula - Error TOO MANY ARGUMENTS

Nov 6, 2012

I'm trying to use this formula but I get the error "too many arguments". How can I do the same as the formula without an error:

=IF(ISNA(VLOOKUP(B12,GYROLOK316ANDM!A12:E2000,3,FALSE)),VLOOKUP(B12,GYROLOKBR!A12:E2000,3,FALSE), VLOOKUP(B12,VALVESFILTERS!A12:E2000,3,FALSE),VLOOKUP(B12,GYROLOK316ANDM!A12:E2000,3,FALSE))

I added in the VLOOKUP(B12,VALVESFILTERS!A12:E2000,3,FALSE) - when I used it without that it worked. But I have 3 sheets I need the the VLOOKUP to look over and this formula that I copied off another thread only had 2 tabs.

View 2 Replies View Related

Combine Vlookup, Isblank, Isna In One Formula

Sep 27, 2009

What i want to do is to look up of the value of home and away games seperatly. if there is no match for the lookup i get the "N/A" and if there is no value i get "0". If i get 0 the formula will calculate as a lost game.

View 10 Replies View Related

Putting Formula In The Sentence Part Of IF / ISNA / VLOOKUP String

May 21, 2013

I have been using an IF,ISNA,VLOOKUP formula as follows which I am sure you are all familiar with :

=IF(ISNA(VLOOKUP(K7,Orig!A7:B35,COLUMNS(B7:B35)+1,0)),"",VLOOKUP(K7,Orig!A7:B35,COLUMNS(B7:B35)+1,0))

This formula works correctly, displaying the lookup value for K7. My query is between the"" I can place text to display when K7 is blank and this works correctly too. However I would like to place a formula in here. The formula is VLOOKUP(I7,Orig!A7:B35,COLUMNS(B7:B35)+1,0 i.e. the lookup value is now I7 and not K7 when K7 is blank.

I have tried the following and variations based on what I know but they return errors.

=IF(ISNA(VLOOKUP(K7,Orig!A7:B35,COLUMNS(B7:B35)+1,0)),(""& VLOOKUP(K7,Orig!A7:B35,COLUMNS(B7:B35)+1,0),VLOOKUP(K7,Orig!A7:B35,COLUMNS(B7:B35)+1,0))

Any better way of using I7 as the lookup value when K7 is blank.

View 7 Replies View Related

Using The Function ISNA In A Macro

Nov 4, 2008

It then places all the data on a new sheet. My problem is that some of the formula that the macro places on the new sheet come back with the result #N/A - which is fine, as they are the result of a lookup.

What I want to try and do, is at the end of the macro, get it to delete the row if the activecell is showing as #N/A

I've tried to write a small bit of code for it...

View 10 Replies View Related

If Statement With Vlookup And Wildcard

Jan 7, 2014

I need to lookup data from four different columns to match a value in another sheet. The lookup value has to start with "4" in order for it to be the correct match. I've tried the following formula for just two columns:

=IF(VLOOKUP($C2,'Sheet 1'!$D$2:$H$10000,5,FALSE)="4*",VLOOKUP($C2,'Sheet 1'!$D$2:$H$10000,5,FALSE),IF(VLOOKUP($C2,'Sheet 2'!$E$2:$G$10000,3,FALSE)="4*", VLOOKUP($C2,'Sheet 2'!$E$2:$G$10000,3,FALSE),"False"))

The problem I have is that the wildcard function isn't working in my If statement (apparentley that's how Excel was designed). The first vlookup returns the value "40042565" but Excel doesn't show it matching the criteria with the wildcard ("4*").

Any way to lookup the value in C2, search through multiple columns, and return the value that starts with "4"?

View 3 Replies View Related

VLookup Of Concatenate With Wildcard

Jan 31, 2014

I would like to Vlookup an association of data in a matrix where not all information is available. e.g:

Vlookup of following data (concatenate):

A1&B1&C1&D1
A2&B2&C2&D2
A3&B3&C3&D3

but in the mapping I would have a wild card (*) in certain columns (not always the same column)

The concatenate would be for exemple:

A1&*&C1&D1
A2&B2&*&D2
*&B3&C3&*

I know it works on the other way around (Vlookup of concatenate with wilrdcards) but I can not have wildcards in my source data.

View 7 Replies View Related

Vlookup With Wildcard Search

Oct 28, 2008

picture this.

Cell A1 = xyz3
Cell B1 = 5
Cell C1 = xyz3-hgfe-56f

I need to do a vlookup on C1 in range A1:B1 that will return B1 if C1 contains the string in A1. I've tried using the TRUE variable in the vlookup formula which does not require an exact match. This works for about 80% of my data but is not 100% accurate. Of course I've got a long list of data ... not just the 3 cells.

View 4 Replies View Related

Get The Name Of The File In A Vlookup VBA Using Wildcard Characters?

May 17, 2014

get the name of the File in a Vlookup VBA using wildcard characters. I have to do a VLOOKUP from a specific file which is stored in the same folder as the file in which I need to get this VLOOKUP done, however the name can change anytime keep a word common only for this specific file...

Ex:
I have a File called "Mapping as on 8th May" from where i need to lookup some information for my file and I intend to do this using VLOOKUP in VBA in a Module but since the name can change to anything such as"Mapping as on 16th May" I cant use it in the VBA code, so is there a way around this where If I have this file stored in the same folder then I keep the word "Mapping" specific and unique for all other files in the same folder that the search can pull this file name to be further used in my lookup..

how to use the wildcards in VLOOKUP lookup range for the file name as the columns are going to remain the same...

View 13 Replies View Related

Can Use Wildcard For R1C1 (lookup Value) In VLookup

Aug 21, 2013

know if I can use a wildcard on R1C1 notation for my "lookup value" in my Vlookup, so that the Vlookup searches for a not exact match, but on the whole contents of the cell, not just the first several letters? I am using VBA, and the vlookup is in each cell of a for next loop, so I cannot use an actual cell reference which is where I've usually seen, and used wildcards. I've tried changing the Vlookup to have the lookup value be "Cells(n,2)" instead of "RC[-2]" to no avail. I need to make the vlookup evaluate all the words in cell "RC[-2]" prior to returning the value I specified, because otherwise it returns the wrong value even though I sorted my lookup table Column A A to Z.

Start Date
End Date
Event ID
"Trans-Pacific Melodies" : an East-meets-West concert presented by Carolina International Orchestra and the China National Orchestra
10/06/13
10/06/13
22297

[code]....

View 1 Replies View Related

Macro For Conditional Formatting Using Isna, Match And Indirect In The Formula

Apr 2, 2009

I have configured conditional formatting to check valid entries in a dependant list. I used the solution provided by SHG at:

http://www.excelforum.com/excel-prog...ant-lists.html

Now I need to use a macro to activate and deactivate the conditional formatting due to performance issues.

When the formula for data validation includes the indirect funtion I got a compile error and the macro won't run.

View 3 Replies View Related

VLookup In Array Search With Wildcard Characters

Jul 10, 2012

I have a sheet with Names in it. I need to look those names up and find which org they belong to. The problem is the the names have many characters after them, and many names belong to a few orgs, with a the rest belonging to many orgs. (See below)

I have been trying to get a Vlookup to work, but since it can't go left, it won't look up the orgs that don't own at least three names. And I can't get the search to work on the names.

Names:
WSGHG1-8410YFH

WSSMXG-8401B8T

NBSMXG-0310V6R

NBXG-0310V6V

[code]....

View 4 Replies View Related

Vlookup Across Sheets, Nested Vlookup Possibly?

Jun 9, 2009

Iím trying to develop a workbook which holds monthly data on loan information. It tracks the interest and balance on the loan. I want the first page to have a table displaying the interest payments for every individual tab. When I was brainstorming the idea, I was considering a sort of Vlookup function to find the tab the account is on and then a further function, possibly another vlookup which connects the month to that monthís interest payment. Can anyone help me figure this out?

The attached spreadsheet is obviously simplified, there are well over 30 tabs. But I would like it to, ideally, search the account number column, search the workbook for that account number, and then when on that page use the month at the top of the first page and retrieve the interest payment and put it back in the cell. Itíd also be great if the formula can be transferred between workbooks. Iím not sure if that makes sense; basically if I were to copy that worksheet into the next months book, I would like that the formula read those tabs instead of becoming obsolete due to references from the first workbook.

View 14 Replies View Related

Can Wildcard Search Asterisk Be Tuned Off When Using VBA Code?

Dec 26, 2012

I am trying to run a routine in VBA that will Search for a Part-No. that normally contains asterisks. It is giving me bad positive Search results due to the coding looking at the (*) asterisk's as a wildcard character.

The following Part-No.'s are located in cells (C11:C16):
9L3Z*17757*BCP
6C3Z*16138*AACP
AE5Z*16138*B
AE5Z*17E811*CF
AE5Z*17E811*F
AE5Z*17E810*F

Part-No. to be Searched for:
AE5Z*17E811*F

When the below code is run, the incorrect Part-No. 'AE5Z*17E811*CF' is found in cell (C14) rather than the correct Part-No. found in Cell (C15).

Code:
'The following 2 lines are defaulted for ease of coding
pNumb = "AE5Z*17E811*F"
Range("C11", "C16").Select

[Code] ......

View 5 Replies View Related

Vlookup In Macro Code

May 7, 2008

convert this formula to VBA.

The are four formulas in there:

1. lookup formula.

2. remove the 1st number (exmaple: remove 0 in 0123 to become 123)

3. add a number (example: add 0 to 123 to become 0123)

4. convert a number into text format.

View 3 Replies View Related

VLOOKUP With Nested IF

Mar 20, 2014

I am trying to make this work. VLOOKUP (B2,"lookup tables'!$A$4:$A$11, if(D2'="ST" 'lookup tables!$C$4:$E$11.

I am attaching the file : MDCC Reservations.xlsx

I am trying to get the Daily room charge.

View 5 Replies View Related

Nested IF Or VLOOKUP

Nov 7, 2007

Level RatingA RatingB RatingC Low Medium High
2 x x x x x x
3 x x x x x x
4 x x x x x x
5 x x x x x x

I need to be able to do nested loops. I want to have a criteria that if a person is in LEVEL 2 and RATINGC and HIGH, then take the value under that.

View 9 Replies View Related

Nested IF/OR With VLOOKUP

Sep 24, 2009

I'm trying to build this formula and I'm only half way through it and it already isn't working.
Column D - can be 1, 2, 3, or 4
Column E - can be any number

If column D is 1 or 3, then the VLOOKUP should look up column E and point to the answer in column 4 on another worksheet (Companies in this case). If column D is 2 or 5, then the VLOOKUP should look up column E and point to the answer in column 5 on another worksheet (Companies in this case). This is what I have so far, just trying to get it to recognize if it is a 1 or 2:

=IF(OR(D2=1,VLOOKUP(E2,Companies!A:G,4)),IF(D2=2,VLOOKUP(E2,Companies!A:G,5)))

What is making this not work? I'm getting a false. But before I added the OR, it worked for the D2=1.

View 3 Replies View Related

VLookup - VBA Macro Code For More Than One Column?

Oct 10, 2013

I have 2 sheets, sheet2 have data consist of 5 columns I want to vlook up by vba code so the data from sheet2 with reference here is (ID) search in sheet1 and update the data from sheet 2 to sheet 1 like below. i have found a similar code but it updates only one column that is B cloumn i want to update C, D, E columns and rows by the below code. see the below code.

Sheet 2
Id, beginning, principal, interest, endbalance
123, 10000, 1000, 50 , 9000
789, 8000 , 400 , 150, 7600
245, 5000 , 1000, 200 , 4000
456, 4000 , 1000, 1000 , 3000
789, 2500 , 500 , 100 , 2000

Sheet1
id beginning principal interest endbalance
123 10000
789 8000
245 5000
456 4000
786 2500

Ifound below code suitable for the above query but this is only execute column b , I want to execute c, d, e columns how can I do this.

Sub ADDCLM()
On Error Resume Next
Dim Dept_Row As Long

[Code]....

View 8 Replies View Related

VLOOKUP Function In Macro Code

Mar 18, 2008

Is it possible to Call the inbuilt Excel Functions (like VLOOKUP) in Macros. we have to pouplate cells with formula which uses VLOOKUP. one way was to update each cell with required Formula like: [code] Range("A1").value = " = 6*F7*(1-Vlookup(lookupvalue........))"[code] but this was stupid as no of cell to be populated was large and variable and moreover it will return formulae to cells rather than fixed value. What we tried was to defile an table_array as Array(x y) and then use this array to return required VLOOKUP value. However I was thinking is there any way to call function like VLOOKUP in Macros so that we can return a value to cell rather than formula.

View 3 Replies View Related

Macro Code With VLOOKUP On Dates

Jun 18, 2008

I'm trying to look up a value in Analytics Data searchin for the date in B9 to B & rader.

I get error messages, because i can't find the dates. But I'm sure I have defined the ranges correct. The code works in another workbook with the difference that the table with the variables I'm trying to lookup are in the same sheet as the where I want to place them.


Private Sub Upd1_Click()
Dim rader As Double

Dim lookrng As range
Dim updvalue0 As Double
Dim updvalue1 As Double
Dim updvalue2 As Double
Dim updvalue3 As Double
Dim updvalue4 As Double
Dim updvalue5 As Double .........

View 9 Replies View Related

Need A Nested IF Formula Or Vlookup

Feb 20, 2009

Objective: To find out which customers order certain items and which customers dont order certain items. Many customers may order the same item eg customer A, B, C, D all order item "4567"

I have 2 worksheets.

Worksheet 1: Showing 30 item codes, item description and customers. Items in col A (A2:A31), description in col B (B2:B31) runnning down vertically. Customer name in cell 1 of all other columns running across horizontally, eg C1, D1, E1.... (C1:GF1). There are 186 customers. (A formula needs to start at C3 and dragged to GF3)

Worksheet 2: Raw data showing customers in column A and items in column B, There are 3,753 rows. Customer in column A are duplicated as the same customer may order a number of items so for eg

ABC PTY LTD 5671
ABC PTY LTD 5683
ABC PTY LTD 5692
ABC PTY LTD 5610
ABC PTY LTD 5611

Tried the below formula
=if(C1='S2'!A2),=if('S1'!A2='S2'!B2),"ordered","")

View 8 Replies View Related

Vlookup With Nested IF's Or CountIF's

Oct 8, 2009

Hi guys, hopefully you can shed some light onto this small problem I am having.

The current formula I'm trying to use is:

=IF(VLOOKUP(A4,EPG1!D4:AN26,6,FALSE),COUNTIF(PASS,""))+IF(VLOOKUP(A4,EPG1!D4:AN26,6,FALSE),COUNTIF(F AIL,""))

This isn't producing the desired results.

What I am trying to do in words is this:

IF... in this array it equals A4 then look at coloum 6 and then Countif col 6 says Pass and then add another if it says Fail....

View 7 Replies View Related

Nested Vlookup (look The Name Up From 3 Other Worksheets)

Oct 13, 2008

I have a new worksheet:

Employee No. Name

Under the Name colum (B) i want a formula that uses the employee number (A) to look up the name. The problem i am having is that i need to look the name up from 3 other worksheets.

On worksheet 1 i have fridays work and 2 i have saturdays work and 3 sundays!! I only want a name to appear if they worked any one (or more) of these days. If they didn't work i would like the name to remain blank.

On all worksheets employee number and name arein colums A and B.
I do have another worksheet that has name and number only in though. worksheet 4!

View 2 Replies View Related

Nested For Next Loop With VLookup

May 25, 2014

I have 2 sheets in the same workbook -- Entry and Setup. Setup sheet contains details about each class including how many arenas are going to be used for the event. The entries need to be divided up amongst the arenas. We are dealing with around 500 entries.

Setup Sheet
Class Number
Number of Arenas Used
Class 1

[Code].....

View 3 Replies View Related

Vlookup And Nested If Statement

Jun 26, 2007

In the example below I have created a validation list in B1 that references D2:D8. What I am then trying to do for cell B2 is create a vlookup and nested if statement that says if b1 is a number lookup the value in column D and return the value in colunm E and if b1 doesn't = a number, ie 'none' then return a null value. The same goes for B3 where if b1 is a number lookup the value in column D and return the value in columm F and if b1 doesn't = a number, ie 'none' then return a null value.dropdown list problem.

************************************************************************>Microsoft Excel - Book1.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA1=
ABCDEF1Numbernone*NumberDescriptionRef2Description**none**3Ref**1one44***2two55***3three66***4four77***5five88***6six9Sheet2*
[HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box
DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.

View 9 Replies View Related

Excel 2010 :: VBA Code That Handles Several Specific Parameters Or Wildcard Passed To Access

Jul 17, 2013

I would like to develop a user-friendly Excel 2010 spreadsheet that would allow the user to enter from 1 to 10 (i just picked this number at random just to have an upper limit) employee numbers in cells A1-A10 and "click" on the VBA Code button that would invoke an Access Query and in the process return all the applicable data gathered from the query back into the Excel Spreadsheet. Believe it or not, I can do all this mentioned so far. BUT what i cant do is my second option for the user which is allow them to pull ALL of the employees back into the spreadsheet using the same query.

In summary, using Excel as a frontend dashboard, I know how to get a specific number of employees' information from a query and I know how to get all employees' information from a query but I dont know how to get either/or. In other words, I could do this with two queries and two "VBA-Code" buttons but I would like to do it with one query and one button.

View 1 Replies View Related

Nested Vlookup Not Return Correct Value?

Feb 20, 2014

I have the following formula:

=IF(VLOOKUP(A10,'CORE Data 3 Month #1'!$A:$K,6,FALSE)<(VLOOKUP(A10,'CORE Data 3 Month #2'!$A:$K,6,FALSE)-((VLOOKUP(A10,'CORE Data 3 Month #2'!$A:$K,6,FALSE)*0.03))),'CORE Data 3 Month #2'!A3,IF(VLOOKUP(A10,'CORE Data 3 Month #1'!$A:$K,6,FALSE)>(VLOOKUP('CORE Data 3 Month #2'!$A:$K,6,FALSE))+((VLOOKUP(A10,'CORE Data 3 Month #2'!$A:$K,6,FALSE)*0.03)),'CORE Data 3 Month #2'!C3,'CORE Data 3 Month #2'!B3))

The strangest thing is happen. The part of formula underlined and the part bolded are identifical. For some reason, excel is unable to find the value in the underlined portion but is able to find the value in the bolded portion. As a result, I'm getting a #N/A result. how this can be corrected?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved