I'm trying to design an excel sheet where a user will input a date of enrollment, and basing on this date, we would like to get a followup date after one month, and again followup after 6 months. However, I would like it to skip the weekends.
I tried it using: =EDATE($C$2,1) works ok, however =EDATE($C$2,6) gives me a date on Sunday.
First and foremost I would like to congragulate you on this wondeful piece of code in the below link...
The query was to get a future date excluding Fridays and Holidays...
http://www.excelforum.com/excel-work...rkingdays.html
I have a similar query and therefore I pasted this link...
I actually wanted to get a future date using a Dynamic two day off as my the offs keep on changing as well as incorporate Holidays and Leaves if any..
Now Holidays would be official Public Holidays and
Leaves would be taken by the employee..
The code needs to pick the Leaves + Holidays and different offs maybe even more than 2 offs...
I am trying to get the results of the number of days between today and a future date. I am using ="cell containing futuredate"-today() and it gets me the correct number of days. The problem comes in when I have yet to populate the future dates. I am getting -39991 (numeric value between today and jan 01 01) and because I am also using conditional formatting this is even more of a problem. Is there a way get excel to display nothing if it is a negative number? or to give a specified resut if the number becomes negative such as Expired or something of that nature?
View 3 Replies View RelatedI have a table of data (total 142 rows). Column contains dates, in the format dd-mmm-yyyy.
I tried to filter using DATE FILTERS->EQUALS and in the custom filter window, I chose EQUALS then picked a date from the date picker icon. The date I picked was 5/4/2009 (this is May 4, 2009, formatted automaticall by excel as m/d/yyyy).
When I clicked OK, nothing showed up despite the fact that there are 6 occurences of May 4, 2009 (formatted as dd-mmm-yyyy in the data table)
So my questions are:
1. Is this due to the formatting?
2. Is there a way to change the date format supplied by the date picker?
I think I may have over engineered this formula.
$F$40 = Cell with Event Date
=IF(WEEKDAY($F$40,2)
I want to have a future date (30 days from today’s date) added to a cell in column A only if that cell is already blank and column N has an “O” in that same row. Here is the code that I have right now, and it works to add a value based on the conditions that I just described. I just don’t know how to get it to add a date to that is 30 days in advance of today’s date.
If Me.Cells(.Row, "N").Value = "O" And Me.Cells(.Row, "A").Value = "" Then
Me.Cells(.Row, "A").Value = "1"
End If
I am working as a private consultant for a company, and have put together a series of Excel applications, producing charts and providing some statistical guidelines. I will move on from here soon, and will take my work with me. I want to leave this product with the company, but it will become obsolete without some formula maintenance. Therefore, I would like to be able to have the program basically stop working at a future date. I don't really care if it freezes up, deletes itself or implodes. If not I am also afraid many copies of this program will be made and sent to others in my small community.
View 3 Replies View RelatedI'm trying to calculate a date in the future and subtract one day.
The date entered in N38 is 11/09/11.
The term entered in months in C8 is 24.
I want N39 to return the date 24 months in the future minus one day.
So N39 should dispay 11/08/13
How the heck do I do that?
I am trying to create a spreadsheet that will automatically calculate a date in the future.
The future date calculated needs to take the time NOW (as the user completes a field) and determines if this is before MIDNIGHT on the following SUNDAY. If so it calculates the date as a Tuesday 2 weeks on. For example... I request a date now on 1st Jan which is a Thursday. This is before midnight Sunday and so the date calculated would be Tuesday 20th January.
If the time NOW is after MIDNIGHT Sunday and before the next TUESDAY.. ie 0001hrs on the Monday and 2359hrs on the Monday then the date returned should be Tuesday 3 weeks on.. e.g 27th.
It would also need a function that would allow the total number of referrals on a Tuesday to 20 at which point it would overspill and provide a date on the Friday of the same week.. so in the first example it would be Friday 23rd
Is this something that can be achieved with formulas and a set of dates for it to calculate from or do I need to find someone who can do it in VBA for me.
I need to input a future date and time into one cell. For example, if I have a member ship that ends on October 20th at 3:00 pm exactly the kind of format you get when you enter the function "NOW". I would like to put that into one cell and then be able to add and subtract from it.
For example I would like to do something like this, if I had inputed the date and time in A1:
"=Now-A1", it would be cool if I can get the remaining hours or minutes along with how many days are left but not completely needed.
It would also be beneficial if I can drill down further and do it by time zone as well.
I have some real estate rental so what I did 7 columns and its includes: name, phone number, ....., contract start date, and contract expiry date.
my question is how to make the row color changes depends on the expiry date
for example, the expiry date is 12/10/2014. I want the the row to be red when 12/10/2014 comes.
Three columns.
A - Date last checked
B - Due Date
C - Actual Date checked
Currently column B simply has =A+84 and will display a date 3 months in future.. Great..
However now i want column B to still display the 3 month date - unless there is a date in C, whereby i want B to then display OK. SO what im sort of needing is =A+84 (or if somethings in C then "OK")
I've developed a spreadsheet in Excel 2000 where one of the cells contains the number of months a quantity will last, calculated by taking the total amount and dividing it by the amount used each month (a constant).
I would like to have another cell where that number is translated into the future date that number of months represents, so that in addition to seeing how many months the total amount will last, one can see when the amount will be depleted.
For example, suppose it is December 9, 2009 (as it is now) and the number in the number-of-months cell is 6. Then, is there a way that when 6 is calculated, in another cell appears something like June 9 2010 or 6/9/2010 or 6/9/10 (assuming the computer's clock is correct)?
It would be nice if the formula would handle decimals too, such as the date for 6.4 months, but that's not essential.
I need to create a spreadsheet which will have a start date and duration on programme. Is there any way I am able to automatically insert the End dates based on the weeks on the programme?
Additionally, can a function insert a date for the reviews which should be every two weeks into seperate cells?
Name
start date
weeks on programme
End date
1st review
[Code]...
I am using the same structure to update another column, under the same sub:
If Target.Column = 5 Then '
Select Case Range("d69").Value
Case "CB1W"
ActiveCell.Value = DateAdd("ww", 1, Now())
Case "CB2W"
ActiveCell.Value = DateAdd("ww", 2, Now())
Case "CB3W"
ActiveCell.Value = DateAdd("d", 21, Now())
Case "CB4W"
ActiveCell.Value = DateAdd("d", 28, Now())
Case "CB5W"
ActiveCell.Value = DateAdd("d", 35, Now())
Case "NI"
ActiveCell.Value = ""
Case Else
ActiveCell.Value = ""
End Select
I would like to apply the code to the whole column but if I change Select Case Range("d69").Value to Select Case Range("d2:1000").Value I get a Type Mismatch Error (13) - (on Case "CB1W" ) - column d cells are data validation drop down boxes that get their value form a named ranged :Lead_Status. The column is also formatted as Text. (I applied the code to d69 because I have data already in the other cells which I don't want altered till I have the code working)
I would also greatly appreciate your advice on how to incorporate the WEEKDAY function to exclude weekends for the DateAdd function.
I want to calculate a date that is 28 days in the future. I don't want to exclude any days - However - if the end date falls on a weekend or holiday, I would like to push it out to the next business day.
I currently have the weekends covered, but am stumped on the holidays.
(For weekends, I am using the WEEKDAY function on a hidden sheet, and then the following 3 IF statements:
IF today + 28 = Mon.-Fri., then give me today + 28.
IF today + 28 = Sat., then give me today + 30.
IF today + 28=Sun., then give me today + 29.
I have tried adding an additional IF statement to address a specific holiday - namely, President's Day on 2/18/08, which is a Monday - but it won't add the extra day, because I think my initial IF statement re: Monday being today + 28 is overriding it.
I need to calculate the difference in Years, Months and Days between:
Date 1 = TODAY()
Date 2 = 4 years after a date in cell A1, which will always be earlier than today's date
(A bit of backround - I have certain risk management procedures that have a lifespan of 4 years. I want to calculate the time between now and 4 years after the date the procedure was completed, essentially to see how long before they have to be redone).
So far I have:
=DATEDIF(A1+4,TODAY(),"y")&"y "&DATEDIF(A1,TODAY(),"ym")&"m "&DATEDIF(A1,TODAY(),"md")&"d"
But that returns #NUM!.
Removing the +4 obviously just calculated the difference between the date in A1 and today, but I need the date in A1 PLUS 4 years and today.
I have also tried:
=(DATE(YEAR(A1)+4,MONTH(A1),DAY(A1))-TODAY())/365.25
which works in theory, however:
a) no consideration for leap years
b) does not return nY, nM, nD - only the decimal.
However I would be happy to use this method if I could convert it to Years Months Days.
I'm trying to combine monthly calculations with "today" and with "workdays"
Example:
start date = 01/01/2009
today's date 09/16/2009
formula result = 10/01/2009 ; or if 10/01/2009 is a Sunday, result = 09/29/2009 (not 02/01/2009, 03/01/2009, etc)
=edate gives me a month but it doesn't skip weekends or calculate beyond today's date
I had a Calendar Control (2007) but now stuck using 2013. I have to change all of codes related to my Calendar Control to a Month View Control. Problem is I had 4 command buttons beside my calendar to automatically add value to the calendar:
My Code is in a userform. Standard code for MonthView:
[Code] ....
Basically it was “highlighting” the todays date but if one of the cmd_button was clicked then it would highlight the today’s date plus 15 (making the highlighted date, if we take today as an example: 2014/05/22).
Now with the Month View is there a way to select the exact same thing? I mean I know if I deactivate the “Show Today” in the properties but is there a way to make the selected date to have the “Circle in Red” around the date IF I click on a command button?
I need to determine a formula which will allow me to calculate a future date based upon a current date with varying time periods.
For example:
I have a bill which is paid on the 15th and last business day of each month. I would like to be able to see the next due date regardless of what day of the week it is.
I have a bill which is paid every other Tuesday. I would like to know the next due date without having to enter +14 for every due date in the future. In other words, it is preferable to be able to open the spreadsheet and automatically see the next due date, not use autofill to repeatedly add +14 to a previous date which would limit the # of future due dates that could be calculated.
I have a bill which is paid on the last business day of each month, not the last Friday of each month. I would need excel to return a value for the last day of the month which = Monday-Friday, regardless of what day of the week it may be as long as it isn't Saturday or Sunday(holiday exclusion would be nice but not required).
I am trying to calculate the length of time of employment. I am looking for a formula to subtract the date of hire from the date of termination.
My current example is:
5/24/12 - 11/3/10 = 568
There is a problem with my formula as the answer of 568 is currently meaningless. How do I convert this?
Using Excel 2007
I am now trying to create a excel macro to auto populate all the dates with reference to a start date and end date. The catch is that only working days are required in the range. My reference cells (start and end date) are in Sheet 1 while the destination cell range are in Sheet 2. The reason for creating a macro instead of a function is that the intervals between the start date and end date changes frequently (annual, semi-annual and quarterly) Best case scenario would be a button which I can just press after i input the dates to generate the range of dates in another sheet.
View 1 Replies View RelatedI'm trying to workout how to take a known initial date a repeating frequency and work out the next due date from today.
Example
Initial Date :- 1st of January 2014
Frequency :- every 5 weeks
Current Date :- 9th of March 2014
Next Due date should be :-12th of March 2014 (if I worked it out correctly from my paper calendar)
I want to use a cell formula to do this for different initial dates and varying frequency periods (the frequency will always be whole weeks i.e. 1,2,3,4,5,6,7,8,8,10)
I need to create formulas that reference a single date and output date ranges. The objective is to have a person input a Monday date in any given month and receive a four weeks out worth of dates and ranges. For example: In a lone cell, the person inputs 10/13/08. Automatically, the sheet produces the next full week range: October 19 – October 25 in a single cell and also produces a cell for each date. Example: Sunday 19, Monday 20, Tuesday 21, etc…. It should look like:
Monday Date:
10/13/08
October 19 – October 25
Sunday 19
Monday 20
Tuesday 21
Wednesday 22
Thursday 23
Friday 24
Saturday 25
and then repeat for three more weeks. I thought I had it figured out until the month changed. The dates continued in October instead of adding a month. This report will be ran weekly, so simply adding a +1MONTH to some cells will not benefit me as I’ll have to change the formula every week. I want the formula to compute the data without any manipulation over the next several years. The only change will be the Monday date.
I have data going in to a small table which has some empty rows as that data is not yet available... My problem is, I need to sort this table in date order but with the date nearest to today's date at the top...
The sort function puts oldest at the top or oldest at the bottom which is no good for what I need...
I use xl 2003.
I need to make a formula which can take a date formatted cell 01/01/2007, and take only the 2007 and compare that to a cell with general format with the txt 2007. If I use =RIGHT(A1;4) i get the date serial rather than the year... how can I pull out only the 4 digit year..?
View 3 Replies View RelatedHow do I extract the date only in Excel 2007
15.05.2013 13:48:00
Is there any formula that I can use when working with a specific date range and if someone's birthday falls in that range a certain text or value would be displayed? For example I want to create a spreadsheet for my soccer players and have them sorted into teams according to their birthdays. So if their birthday falls into the following date range: 08/01/05-07/01/07 a U-8 or U-10 would be displayed in the corresponding cell. I tried working with the IF function.
View 4 Replies View RelatedUser of Excel in Office 2007. However, I for statistics about how my Bitcoin Device's works and decrypts Bitcoins per day for trends and statistics, and so on
Now while I was away so had the power gone, and for almost 24 hours so stood all still, I would now like to outline in red the date / dates where I have zero or very low running time for specific date, but I can only change Fragen for all dates, not individual dates.
The stack's not exist in the data value is equal to zero (null) where by I want to be able to get the date in red color, and possibly also in bold. see print screen below.
[URL] .....
I am trying to find a way in Excel 2007 to convert the date from US format to UK format, I tried to change it by using [right click=>Format cell=>Select Date=>Select the first option in Type:*14-03-01=>OK], but I doesn't work , the attached file are presenting the date in US format.
View 10 Replies View Related