2007 Enable Macro's
Jul 10, 2007
I have converted an Excel file from 2003 to 2007. The file now has a .xlsm extension as it contains macros. I have "enabled all macros" and "trusted access to the VBA project object model". Whilst open, I have tested the macro buttons and they work.
I then close the file and re-open it, and the macro's will not work. A message appears along the lines of "macros are anabled" or "macro is not found". I have double-checked the settings and everything appears normal.
View 9 Replies
ADVERTISEMENT
Jul 20, 2009
I saved the workbook as Macro enabled workbook in 2007. Also changed the security level to 'Enable all macro'. But the Macro buttons on the developer tab still shows disabled. Also not able to open VBA window with Alt+F11 key.
View 9 Replies
View Related
Jun 28, 2012
I'm trying to find out if there is a way to call the security alert to enable a macro. Let me explain...I was working on a sheet with a macro that I hadn't enabled yet. After working for awhile the option to enable it was gone and I found that I had to close the fine and re-open to enable the macro. I'm wondering if there is a ribbon or short cut icon to put in my access toolbar that will give me the option to enable/disable the macro. Seems strange that in 2003 I could to this, but in 2007 I have to close the file.
View 3 Replies
View Related
Jun 13, 2009
I have collected some data from survey respondents, and I have the following array formula:
=MIN(
IF($C$1:$C$400="happy",
IF($G$1:$G$400="tall",
IF($H$1:$H$400="american",
$F$1:$F$400
))))
What I'd like to do is make the 3rd criterion -- $H$1:$H$400="american" -- dependent on whether the string value in cell A1 ("Evaluate Americans only?") is "yes" or "no".
Because, my actual situation is considerably more complex (see below), I'm looking to insert a test within the MIN array formula to check the value of A1, and calculate the answer accordingly.
I'm aware that I could theoretically create two array arguments (one with & one without the American test), and place them inside an IF function that tests the value of A1. However that isn't practical for my real-world situation...
I occasionally see array formulas with all sorts of symbols that I don't really understand in the array context (such as * and | and . ), and I'm wondering if one of those magic symbols might be the doorway to my solution.
View 5 Replies
View Related
Jan 20, 2013
Need a code that sends emails to the intended receipients based on hold codes if Columnd J reads as YES Email formats are listed on "Email Format" tab, code should pick the required field value from the table (Hold Report).
Analyst name, Phone number are entered in the text boxes (data validation for these is desired)
option boxes are used to send email based on the selection as below
if "send initial email without attachment" is selected then emails should be sent without the attachments
if "send initial email with attachment" is selected then emails should be sent with the attachments
Attachments are usually .PDF files and are stored on users desktop with file name as .pdf
if the follow up otion is selected the subject line on the mail should be appended as *** 1st Follow-Up*** along with standard subject line
Rest of the requirement remains same for followup option (same email format is used) based on the option selected, code should be able to send emails with or without attachments. I have provided three command buttons that are intended to work as follows;
Validate data: need to validate the data to ensure that each row has atleast one email address in "TO" column and there are no spaces in the email address.
Clear Data: Should clear the existing data from the table
Send Emails: Should send emails
Standard subject line is a combination as below
Invoice on Hold for ; Invoice number: ; PO Number: ; Invoice Amount:
Note: Column H and I apply only for hold codes Qty Ord and Max Ship Amount
I use Microsoft 2007.
View 3 Replies
View Related
Oct 3, 2006
I have a question concerning Macros and the Disable/Enable prompt. My boss has a spreadsheet which has been used for years and he recently wanted to and did remove the macros from the spreadsheet (they were no longer necessary), but the disable/enable prompt still appears when the spreadsheet is opened. I replicated this in a test spreadsheet with a simple insert line macro and received the same results. Is there a way to remove the macros and the disable/enable prompt once they are removed? I know about setting the security to low to not see the prompt, but I would think that once the macros are deleted, the prompt should not appear any more.
View 2 Replies
View Related
Jan 27, 2014
I want to run a welcome macro in all excel workbooks. Whenever I open any macro enable workbook the welcome macro should run.
View 9 Replies
View Related
Oct 27, 2007
How do I enable macro recording in Excel2003? When I select Tools - Macro, the 'Record New Macro' selection is disabled. How do I enable it?
View 2 Replies
View Related
Mar 1, 2008
I want the user of a file to be able to click on a particular cell and if they right click an option 'Change' will appear on the list of options and on clicking it a macro is enabled.
View 9 Replies
View Related
Oct 23, 2006
I am trying to use the EnableMacros. zip script located here {url} But I am having a hard time making it work!
1. I have copied the module in EnableMacros.zip and imported it into my workbook.
2. I have placed identical code in my workbook's ThisWorkbook as is in the EnableMacros.zip's ThisWorkbook.
3. I have copied Sheet1 from EnableMacros.zip titled "Info Sheet". In MY workbook it is sheet7, but it is titled the "Info Sheet" in the EnableMacros.zip.
4. I have also copied sheet6 from EnableMacros.zip into my workbook and titled it "LoadScreen". In EnableMacros.zip the sheet is titled "Sheet1"
...
View 4 Replies
View Related
Mar 4, 2009
I have Excel file that is linked to Access Database. Everytime the user opens the file, there is pop up message that warns the user we there to enable the macro or to disable it. I want to force the user to enable the macro or even better if I can make disappear this warning and automatically enable the macro. See attached for more details.
View 3 Replies
View Related
May 2, 2013
I am looking for a code that would enable switching of sheets. For example, on Sheet1 (Master Sheet) I have got Industry1 to Industry3 and the companies within the Industries are on Sheet2 to Sheet4. When someone clicks Industry1 on Sheet1, it should navigate to Sheet2 (where it gives a list of companies within the industry), and when Industry2 on Sheet1 is clicked, it should navigate to Sheet3 and so forth..
View 3 Replies
View Related
Feb 23, 2009
what the code to auto enable a macro? I have tasks running on my computer. Everytime they run, I have to click on enable macro. I thought there was a way to automate this, but I can't find the code......
View 9 Replies
View Related
May 14, 2007
I'm working on a macro for work. It's a simple workbook with about 10 tabs. I would like for the user to open up the workbook but it not have the prompt foir enabling or disabling macros. Just on this one sheet, not other macros on other sheets.
View 9 Replies
View Related
Sep 19, 2007
I need my users to always enable macros when they open my workbook. Is there a way I can tell excel to enable macros and skip this initial question for users?
View 4 Replies
View Related
Sep 9, 2012
I have a macro-enabled workbook, in sheet1 i have two columns Country and Codes, they are in column C and D respectively. I used vlookup formula in generating the codes of the countries pasted in column C, they are being looked-up in sheet2 in column C and D as well. I already have 100000+ rows in sheet 2 under column C and D that's why the file is now heavy. Is it possible to encode column C and D in sheet 2 but still can be looked-up? or is there any other way to minimize the file size.
View 7 Replies
View Related
Mar 21, 2007
I am trying to crack away to protect my workbook, by forcing users the enable macros on launching.
What I am trying to do is if Workbook_BeforeSave runs a routine called DoIt. This calls HideAll, saves, then calls ShowAll al whilst not updating. (ie so the user is non the wiser and the computer does not asked to save again if no changes are made).
The reason I am trying this is so that if the user closes the document, it will not ask them again to save. Instead it has preserved the state in the HideAll place (ie all important worksheets are VeryHidden.
It is only by enabling Macros on open can the ShowAll make them visible again.
Below is the code I am using and it works, except it seems the Application.EnableEvents = False in the DoIt macro does not seem to be doing what it should.
very dearly love to get an answer as it is driving me up the wall!
Module 1:
Public bIsClosing As Boolean
Dim wsSheet As Worksheet
Sub HideAll()
Application.ScreenUpdating = False
For Each wsSheet In ThisWorkbook.Worksheets
If wsSheet.Name = "Warning" Or wsSheet.Name = "Authorise" Then
wsSheet.Visible = xlSheetVisible
Else
wsSheet.Visible = xlSheetVeryHidden
End If
Next wsSheet
Application.ScreenUpdating = True...............................
View 9 Replies
View Related
Sep 4, 2009
I need a macro that I can have in any workbook enabling me to protect / unprotect the workbook that I have currently opened with a set password (let say "Password")
I would link this macro to a button in excel 2002. I have try the following but it doesnt work
Would it be possible that the button (first) works (second) understand whether or not protect / unprotected and do the opposite?
Sub Protect
Activeworkbook.protect password:="password", structure:=FALSE, Windows:=false
End Sub
View 9 Replies
View Related
Dec 9, 2008
It's possible to add in my code a line that sets the macro security to low?
I have to put a excel file that contains macros in over 50 computers, and set the macro security to low.
It even exists something like this?
View 9 Replies
View Related
Jul 21, 2014
I need a macro that simply allows me to open the filter criteria dialog to "contains," then stops, so I can enter the value to be filtered. Macro recorder does not allow me to stop recording at the point the "contains" dialog appears.
View 3 Replies
View Related
Sep 7, 2008
How to supress Enable Macro option while open a excel file. I would like to do it using VBA in Macro of excel 2007 + versions.
View 9 Replies
View Related
Sep 7, 2008
I used Scheduled Task to set up my spreadsheet to open daily. I have the code with assistance to pull out the due date items and place them into an email.
I have come across XLSTART/AUTOEXEC/ACTIVATE...ETC...
But cannot figure out the code that will automatically "enabling macro" once Scheduled Task opens the spreadsheet?
Then once the macro runs, the email with the due dates, how can this auto send without user interaction?
(currently I would have to hit send)
I am trying to make the process totally automated to open the spreadsheet at a certain time, send the email with due dates and close the spreadsheet.
Following code in ThisWorkbook--
Private Sub Workbook_Open()
Check_Date_Send_Mail
End Sub
Code in Module1--
Option Explicit
Sub Check_Date_Send_Mail()
Dim wbBook As Workbook
Dim wsSheet As Worksheet
Dim rnDate As Range, rnValue As Range
Dim stAddress As String, stMsg As String
Dim stRecipient As String, stSubject As String
Dim stPost As String
Set wbBook = ThisWorkbook
Set wsSheet = wbBook.Worksheets("Sheet1")
With wsSheet
Set rnDate = .Range("d2:t23")
End With
View 9 Replies
View Related
Feb 18, 2007
I recently installed Excel 2007, and have shared others' joy in searching for things on the ribbon. I tried to record a macro to insert an autoshape. Excel creates the macro, but drawing the autoshape is not recorded. I'm sure I'm missing something obvious ...
View 7 Replies
View Related
Apr 10, 2007
I got a copy of Office 2007 and I am having some trouble running an Excel macro. It gives a 405 Error message. This macro runs fine on my Office 2003. Is there any extra setting that I need to do in the Excel 2007?
View 9 Replies
View Related
Feb 24, 2010
This is the first time i am using this forum. I am having a doubt in the macro. I am using MS-Office 2007 version. In Excel 2007 when you go to "developer" tab, the first group is "code" under that when you click on "Macro". You will be able to see a button called "create". Can you tell for what purpose it is used? when it will be "active" because it is always in disabled state.
View 2 Replies
View Related
Nov 30, 2007
The code to merge sheets to a master sheet runs great, however when I copy the code to the Personal.XLSB to have the macro available to use on every workbook I’m getting an error. The line of code is Application.Goto DestSh.Cells(1) and the error is Method ‘Goto of object’_Application’failed. This happen even if I create a new workbook with 3 sheets and only a few cells with information. The macro to mail the sheet works fine using the Personal XLSB.
View 11 Replies
View Related
Dec 12, 2007
I need to develop a System using Macro in MS Excel 2007.. but i don't know how to do it..
I got 2 file in MS Excel
File number 1 : Demand - file name : ( got 55675 row of data)
File number 2 : Supply - file name : ( got 6774 row of data )
File number 1 : The data is starting from 0110111101 ( commodity code ) until 9999999999 ( commodity code )
File number 2 : The data is starting from 1532423007(commodity code) until 9119199901 (commodity code )
I need to categorize all this data in 10 sheet ( sort by the first 2 digit of the commodity code ):
Sheet 1 : 00 -09
Sheet 2 : 10- 19
Sheet 3 : 20 - 29
Sheet 4: 30- 39
Sheet 5: 40 - 49
Sheet 6 : 50 - 59
Sheet 7 : 60 - 69
Sheet 8 : 70- 79
Sheet 9 : 80- 89
Sheet 10 : 90 - 99
View 14 Replies
View Related
Jan 6, 2008
I want to do simple calculation using Macro in MS Excel 2007..
All the data is in Sheet1 ( Which is 13a ), the calculation is in Sheet2 ( Which is work ) and the result of the calculation will come out in Sheet3 ( Which is result )..
Here is my coding..
View 12 Replies
View Related
Dec 5, 2008
I posted similar yesterday. No one helped...sniff sniff (where's the crying smily)
Now verified to be occur on other machines running various versions of Office 2007...
In Excel 2007, write this simple macro and assign it to a shape:
View 6 Replies
View Related
Jun 10, 2009
I have written a macro to hide any column (within a range of columns) that has an 'x' in it. By putting the 'x' in the column, it allows the allows the user to choose what columns they want to hide. I have an inverse macro as well that unhides those hidden columns.
These macros work perfectly in Excel 2003, but they do not work in Excel 2007. In Excel 2007 I get a compile error: can't find project or library. As a note, all other macros in my spreadsheet (Module 1) work.
View 2 Replies
View Related
