I got a copy of Office 2007 and I am having some trouble running an Excel macro. It gives a 405 Error message. This macro runs fine on my Office 2003. Is there any extra setting that I need to do in the Excel 2007?
View 9 Replies
I'm having a bit of an issue with OWC in 2007. I know they have been deprecated but I was under the impression, form many places including MS themself, that you could install them. I downloaded this file
http://www.microsoft.com/downloads/d...DisplayLang=en
and then the SP1 2007 file here
http://www.microsoft.com/downloads/d...displaylang=en
All seems to go well and there seems to be a appropriate .dll in c:Program FilesCommon FilesMicrosoft SharedWeb Components111033 by the name of OWCI11.DLL. However when I attempt to add a reference to that file in a VBA project in Excel (it's one that has an old broken reference to 2003 OWC) by browsing to that file it tells me
"Can't add a reference to the specified file"
What have I done wrong? Is what I am attempting, getting 2007 to use OWC, even possible? Note I did not write any of the code for this Excel Add-in so have very little idea about what OWC are for.
I'm opening an Excel file that automatically attempts to update links when I open it, but I am not prompted with the choice to cancel, or update links, when I open the file, like I was in Office 2003.
I have checked the Excel Options, Advanced, General, 'Ask to update automatic links' box, but I still don't get the dialog box when I open the file.
The file is just riddled with VALUE errors. A colleague of mine who opens the file in Office 2003 can see all the data fine.
I have an older laptop with XP and 2007 Office / Excel this works, with the new laptop doesn't work?
basically - I open a new spreadsheet - blank - just basic
I used to be able to click the data tab, then click From Access, then enter my URL to an access database on my website and BAM my data would populate in cell A1
with VISTA - I get the same error over and over again, tried a different XP machine, no problem? What gives?
error box states: Microsoft Office Excel cannot access the file [url]
there are several possible reasons.
the file name or path does not exist
the file is being used
workbook has the same name
I'm starting to really hate VISTA after about 3hrs with this new laptop!
In the following thread, richphillips wonders about Application.Filesearch
Application.filesearch In Office 2007
Is there a replacement for this? I have several macros that use Application.Filesearch and I would like it to work not only with Excel 2003 but also with Excel 2007. This is the function
Function CreateFileList(FileFilter As String, _
IncludeSubFolder As Boolean) As Variant
' returns the full filename for files matching
' the filter criteria in the current folder
Dim FileList() As String, FileCount As Long
CreateFileList = ""
Erase FileList
If FileFilter = "" Then FileFilter = "*.*" ' all files
Debug.Print CurDir
strFolder = BrowseForFolderShell(, , , 0)
If strFolder = "" Then
MsgBox "You Cancelled"
Exit Function
End If............
I have been using code to save a collection of my reports in html format that has work very well until I was forced into using Vista and office 2007. Here is a snippet of the code that no longer works - at least I suspect this is the main problem.
View 4 Replies View RelatedI created a macro that will do a subtotal and copy the value then undo the subtotal and delete all the values(i dont need the actual raw data, just need the subtotal). i noticed when i do a copy, i have to paste from the office clipboard. is there a macro i can use to paste from the first item on the list?
View 1 Replies View RelatedI'm doing a data/filter/advanced filter/show all/unique records to get rid of any duplicate rows. I tried creating a macro and but the macro recorder doesn't know that I want to do NOT a regular paste, but a paste from the most recent entry from the Office Clipboard. Is there a formula and/or macro that will allow me to do this?
View 4 Replies View RelatedI'm trying to run a macro on my machine (Windows 2000 and Office 2003) and I keep getting an error on one method. Now I tried to run the same macro on a different machine (Windows XP and Office 2003) and it didn't error out.
Public strControlTitle As String
Public strControlTime As String
Public strControlUnit As String
Public intControlItem As Integer
Public intLastNameOnly As Integer
Public intDataType As Integer
Sub Main()
Dim strControlItem, strPageName, strValue, sigma, z95, z99 As String
Dim r, c, count, cmax, rmax, rt, ct, low, high, a, b As Integer
Dim lesscol As Integer
With ControlChartForm
.ComboBox1.AddItem ("Average Turn Around Time All Patients")....................
I have a VBA macro for automatically create a word report using data in Access and Excel. The macro is hosted within a Excel document but are using both Word-, Excel and Access objects/dataTtemplates for the creation.
The errors appears what it seems randomly. The macro iterates the same code a few times even in Office 365 but then it crashes. The most common error messages are:
Error 1:
Run-time error '-2147417851 (80010105)':
Automation error : The server threw an exception.
Error 2:
Run-time error '462':
The remote server machine does not exist or is unavailable
Error 3:
This action cannot be completed because the application () is busy. Choose Switch To to activate and correct the problem.
(no options are working, this hang the application)
If I debug usually the error originates from the code where I ether close the workbook template I'm using:
excelWorkbook.Close False
... or when I paste a chart from Excel to the Word report:
wordDocument.ActiveWindow.Selection.PasteSpecial
Even more strange are that sometimes if I continue to run the macro its all working again. This ONLY happens when the client office installation is O365. Office 2013 works just fine. I thought O365 and Office 2013 was fairly equal?
ive got my highly expensive office enterprise 2007 disk
what is the best way of installing this so i can still use 97 and 2007. any tips?
i wont bother with outlook but i'd like to try the rest ,mind you onenote,infopath and groove are a complete mystery!
how to change language of MS office.English language is not showing in options.Do I need to purchase language pack?I am using english language other than office.
View 1 Replies View RelatedI have recently updated to Office 2007. I have about 50 forms with VBA in them (all excel) and I was careful to save them all back to 2003 office files. When one of my users opens the files and uses on of the internal userforms it errors out saying it is missing a reference.
View 9 Replies View RelatedI create a vb script file using SAS that will open excel and create pivot tables. It works in XP but not in office 97. I am not a vb expert. Here is the code.
Set XL = CreateObject("Excel.Application")
XL.Visible=True
XL.Workbooks.OpenText "D:JDTEMPXLWORKBOOK.TXT", 437, 1, 1, -4142, _
False, False, False, False, False, True, "|", _
array( _
array(1, 2), _
array(2, 2), _
array(3, 1), _
array(4, 1), _
array(5, 2), _
array(6, 2), _
array(7, 2), _
array(8, 2), _
array(9, 2) _ ............................
My organisation has ten small offices within a ten mile radius.
Most of the items to order are office supplies, along with order forms, catalogues, brochures and pro-formas.
Each office does not order the same items.
I would like to make a ‘generic’ supplies order in excel.
Column A = ‘in house’ code
Column B = Description
Columns C to G are size, colour, pack size etc.
Column H = quantity held
Column I = quantity required to hold
Column J = amount to re-order.
I would like Excel to calculate
Amount to bring stock to hold - “=I4-h4” (in J4)
If Current Stock is more than Stock to Hold then ‘0’ is in J4, “=IF(H4<I4, I14-H14,0)” (in J4) I think.
If H4 is left blank then J4 to show “0” or ‘Blank’. (experiments have given J4 a figure of 25)
I have tried putting two formulas together, but Excel tells me I have ‘too many arguments’.
I have call data for a client and I want to know what calls came in after hours. I cant seem to get the formulas to work correctly.
It seems to run the weekday/weekend check correctly but the time is not working properly.
=IF(WEEKDAY(A2,2)>5,"Party",IF(AND(B2<=9,B2>=17),"Party","no Party"))
P.S. While writing this, I realized that it should be (<=9 OR >=17) or (>=9 AND <=17) but neither of those worked either.
party_noparty.xlsx
Im looking to make a formula that states if b3 =10 then a. if b3=12 then b, if b3= 14, then c, if b3=16 then d. A, B, C, D are referring to links to another sheet.
View 8 Replies View RelatedIn certain spreadsheets I have noticed a significant deterioration in save times. There may/may not have any formulas or macros on them and most are very small files 20-50kb. I notice that Excel puts a temporary file on the desktop while saving the original. The temp file goes away once the original is saved. While saving, I get the time icon which goes to beachball and it can take up to a minute to save the file. This happens on 2-3 Macs on network. Using 10.5
View 4 Replies View RelatedI have a scorecard created in excel 2007. All my end users are using excel 2002. Now I want to build a scorecard in Excel 2002 like what we have in excel 2007. Is it possible.
I want to display the traffic signals and 5 level indicators (arrows), based on conditional formatting.
This is out of box in excel 2007. But how do I achieve this in excel 2002?
Is there a simple method?
Is it possible to send the contents of a cell to outlook via VBA trigger?
View 14 Replies View RelatedIs it possible to determine the Version of Office / Outlook that is installed on a machine, an based on that, add a reference to the correct Microsoft Outlook com object library programatically?
View 10 Replies View RelatedCan any Mac users out there confirm that if a sheet is protected that a user cannot group and ungroup rows using the "+" if the sheet is protected using the following...
With Sheet1
.Protect Password:="******", UserInterfaceOnly:=True
.EnableOutlining = True
End With
It works fine on my PC Office 2003 but I hear it won't work on a Mac but I can't confirm it.
Our office has different versions of Office on different computers. We have a file containing macros specifically macros that interact with Outlook requiring the Outlook Object Library. If a 2013 opens and saves the file all the libraries get changed to 15.0. Then a 2010 Office opens the file ... the Excel Objects and Office Objects libraries change to 14.0 because of 2010, but then we getting the error about missing library. Instead of loading the Outlook 14.0 Object Library like it's supposed to the systems tries to find the 15.0, but can't find it and throws the error.
I have to manually go in to References and uncheck the Missing 15.0 outlook library and find and check the 14.0 one and click ok then the macros work fine.
My question is why do the other object libraries automatically change depending on the version of office and the outlook one doesn't.
Interestingly enough this doesn't happen the other way e.g. 2010 to 2013. Ones the file is saved using the 2010 with the 14.0 references 2013 has no issues converting those references to 15.0.
I have a Access database as a frontend sending data via transferspreadsheet to Excel. All works well in the A2k and Excel 2k in which it was built. I need to distribute to other users and some have Office 2003 which has caused some problems with Object Libraries but I have made a modified XL2003 version to load on those systems. However, I get a Run-time error 1004, "Application defined or Object defined Error" and the debugger stops on the following line of code that should be underlined ....
View 9 Replies View Relateda macro that will take my excel sheet (using office 2003) and then pasted it in outlook.
Also I need cell A1 and cell B1 pasted in the subject line.
I am trying to have a column that returns either "secure" or "re-assignable" depending on whether the employees title matches the appropriate office/ space allocation.
e.g. an employee who's title is "CEO" and office type is "Large Exterior Office" would return a secure. However an employee with a title of "Admin Assistant", who's office type is "Large Exterior Office" would return "re-assignable"
how i can turn on view vba code in Apple MAC office 2008.
View 3 Replies View RelatedI have a shared spreadsheet that uses a column with a validation list. I want to be able to take the MS Office Username contained in Tools > Options to be put into a cell A1 when changing the value of A2.
I'm trying to pass a variable from Word to Excel. Basically I have a Word document with a plain text content control in it. I'll have users populate this field. I know how to create a reference to that content contol in Word VBA that'll tell me what's in that content control (eg.
Code:
MyWordVar = ActiveDocument.ContentControls(1).Range.Text
).
What I can't figure out is how to pass the value of "MyWordVar" to a variable in Excel.
In my helpdesk spreadsheet, Column C has the date a request is received and Column D has the day it is signed off as complete.
This is used to compare how many days it takes before each request is completed.
Column B is usually blank, but, if the day a request is due to be completed is in the future, such as waterblasting set for 5 working days ahead, then the expected completion date is in Column B. As we don't want a report to show it took five days to complete, when 5 days was waiting for the booked job, we only want five days when we are working on it for five days.
So a typical request is received on Monday 1st January (C), completed on 3rd January (D), taking 3 working days to complete.
A less typical is a request received on Monday 1st January (C), booked to be done on the 4th January, (B). If the job is completed on the 4th, then that will be entered into (D). And we want it show as taking 1 day or less to complete.
I'm quite new to excel formulas , but would like to know the format for
IF B = Empty, then display the days (minus holidays and minus weekends) between C & D.
IF B = non-blank, then display the days (minus holidays and minus weekends) between B & D.
I've tried to play with the Workday function but it and the format of the IF function seem just beyond my grasp, depsite it simplicity, so hopefully a bit more insight as i get to grips with formulas would help me out...
