I have an input box that request the user to enter a vlue between 1 and 6, and uses the answer to multiply another range of cells.
Now I'm not sure how to add a couple of other features. I would like to:
1. Loop the input box until an acceptable answer is given, (numeric, between 1 and 6), with a message box prompt that says "Try Again".
2. Exit the macro if the user hits "Esc".
Here is my current
I have a code like this below
Sub Copydata()
Dim emre As Integer
For emre = 100 To 121
Sheets("CP TB").Select
ActiveSheet.Range("$B$8:$G$10000").AutoFilter Field:=3, Criteria1:=emre
Range("E8:F8").Select
[Code] .....
I want to skip values when the selection is a value I choose. I tried to put a "If" statement but I couldn't make it work.
The IF statement will check the selection after red colored code. if cell value is "a" then it will go for Next emre.
I have a range (C3:C56). I have a set number in each of these cells. I also have a range out to the side that calculates a number after input a % in cell BI2. The formula reads as "=AE3-(AE3*$BI$2)". Basically it is reducing the values in my range. If a number is in my range is 8 and i input 25% in cell BI2, then my result would be 6.
I have a few steps I want to happen with this range.
1 Display an input box asking for a percentage
2 I want to loop through my range and use that percentage to reduce the numbers
3 (optional but would be amazing to have) after the reduced value is determined, round down to the nearest multiple of 4.
I am trying create a macro which asks for the Sheet name as an input for a Sub. I've gotten it to work but there is just one problem: The Cancel button does not work on the MsgBox. Everything else works just as I want to: it shows a dialog box to enter a name for the worksheet and if the worksheet does not exist, it loops and shows a message saying that it does not exist.
However, the cancel button does the same thing as entering nothing in the box and it does not end the process. I would want it so that the cancel button kills the process. Here is the code:
Code:
Option Explicit
Function WorksheetExists(WSName As String) As Boolean
On Error Resume Next
WorksheetExists = Worksheets(WSName).Name = WSName
On Error GoTo 0
[Code] .......
I have several hundred workbooks with multiple worksheets(15-35) that I am trying to tidy up, so the data can be entered into a database. Its my first attempt at VBA and between the forum and macro recorder I made an attempt which is below. I just can't seem to get over the last part. I have searched the forum but can't seem to find any relevant information. I have a couple of questions.
1. I need to be able to run this macro over all the worksheets in the workbook, so how can I loop it? All the worksheets are named differently i.e. peoples names.
2. In my code I have inserted 4 columns. These columns will be the only thing common between all the worksheets. A1 to A30 = Week number, B1 to B30 = Shift Number, C1 to C30 = Supervisor number. Column D is blank. I'd like to be able to be prompted to enter these 3 numbers at the start if possible? Can this be done in such a way as you are only prompted the once and not on each worksheet? I picked 30 rows because the amount of rows in each worksheet varies but never exceeds this. The end of my code "Delete rows where cell B is blank" will delete any excess data where 30 rows of week numbers etc are not needed.
Sub CleanCost1_1()
'
' CleanCost1_1 Macro
' Macro recorded 04/09/2009
'
' Delete Job Card Sheet
Sheets("Job Card").Select
Application.DisplayAlerts = False
ActiveSheet.Delete
Application.DisplayAlerts = True
' Delete Master Sheet
I am basically creating a questionnaire style program where the user gets asked 50 questions, one by one and they input their answer and press another button (submit button). They initially press a start button to start the questionnaire.
So far, I have created a range of questions and it fills one row where the questions are entered. In intend to use a for loop to go though all 50 questions.
Now this is where I’m stuck. I have a submit button and after each question is displayed, I want the user to enter their answer and then click the submit button to then continue to the next question.
However, I can’t think of how to do this.
1.Firstly, how can I loop through the questions and yet allow the user to input their answers after each iteration?
2.Also can I even click the submit button during the loop phase? I.e. when already running.
Assuming I have three worksheets:
1) input: col A has a series of product code (string)
2) calculation: where I want to automatically copy and paste each product code from "input" worksheet into "calculation" cell B4, and through many steps of calculations, return the outputs in cell B8 and B9 (parameters are numeric)
3) output: how to automatically record B8 and B9 from "calculation" sheet to this sheet Row 5 and 6 from each loop? (format of output doesn't really matters)
The code below first asks a user to input a weekending date (which must be a Saturday). The value of the input box goes to cell C1 of my spreadsheet. That part works fine. I also have a function in Cell G1 with the function:
=TEXT(C1, "dddd")
I don't know if this is the best way to test for a Saturday but it is what I have,
Where is goes bad is if the date is not a Saturday. I have a loop to force a new date install via a input box but it won't update C1 with the inputed data to recheck for the Saturday value. Below is the whole code I am working with...
Dim aa As String
Dim bb As String
If Range("C1") = "" Then
Do While bb = ""
bb = InputBox("Please Enter a Weekending Date!")
Loop
Range("C1").Value = bb
End If
If Range("G1") "Saturday" Then
Do While aa "Saturday"
aa = InputBox("Weekending Must Be a Saturday. Please Enter a New Weekending Date")
Loop
Range("C1").Value = aa
End If
I have a spreadsheet with 5 columns. A1 to A5
Entries are made into columns A2 to A5 but only ever one entry across all cells
If an entry is made into A2 to A5 the I need a "P" to be placed into A1
I am trying to create a macro which gives me an input box. I need to enter 2 numbers into the input box. It would be as follows:
Input Box Msg 1 - "What is your labor cost?" (NUM1)
Input Box Msg 2 - "What is your productivity rate?" (NUM2)
Then I need the macro to take this info and enter it into a formula which changes according to the row which you are on. (I need the macro to work based on which ever cell I currently have selected). The formula would be this if I currently had a cell on row 10 selected:
=(NUM1*(NUM2*$H10))/$H10
So, if I currently had cell L10 selected, and I ran the macro and put 100 in for "NUM1" and 10 for "NUM2" and my sheet had 20 in cell H10, then the macro would enter the number 1,000 into cell L10. If I had L500 selected, then the macro would enter the final number into cell L500 based on what value H500 contained.
With Sheets("regrade pharm_standalone")
For Each r In .Range("standaloneTerritory")
If r.Value = "X101" Then
r.EntireRow.Copy
Sheets("X101").Range("A1").End(xlDown).Offset(1).PasteSpecial xlPasteValues
End If
Next r
End With
-------------------
I need to repeat this loop for values from X101 to X151. In all cases, the sheet name is equal to the value I'm looking up (eg: value = X102 goes to sheet X102).
I have a named range called 'territories' that contains the list of X101 -> X152.
I'm hoping to make the code perform the loop for each of the territories without my having to copy & paste and change the 'X101' 51 times as this would seem a rather silly thing to do!
I would like to know if it is possible to transfer values of cells this way?
I've attached the excel file for easier reference.
I have to design an input user form (a button that opens an input box or dialog box), which asks user to "Enter number of "columns"".
User enters a number i.e. 2 or 3 etc
It then asks user for the headings of these coulmns and places first column heading in A1 and second column heading in B1, third in C1 and so on ...
I am just starting to get my feet a little damp with VBA and I am trying to make a macro that will act whenever any text is entered in any cell within a 3x3 square. Whenever any text is entered in any of those cells I would like it to enter a text ( "X" ) in a cell which is specified by a cell in the spreadsheet (this cell will output which cell the macro should write the text in in this format "A:1" or "C:3"). How can I make the program act only in reaction to the user entering thier text, and also, how can I get the macro to read A:1 and enter the text into that specific cell? Any help would be so awesome, the book I have is really difficult to navigate.
View 9 Replies View RelatedMacro which loops through a number of files and calls the same macro in each of them. Unfortunately when I add "Application.Run..." to the code, it no longer loops through the process and instead stops after updating the first file in the loop. If I remove the "Application.Run..." code and add any other code, the loop works fine and it continues through the process repeating all the steps for each file found.
Why it stops after one file when using "Application.Run..." to call the macros?
NB I have a list of path and file names starting in row 8 of columns A and C. Each file in the list has a macro called UpdateS1 and promoupdate1.
Sub C_Run_Loop_Macro()
Dim lastRow As Long
Dim i As Long
[Code]....
I have working code that returns a row number within a for loop based on parameters I set.
Each time the for loop runs I would like to store this row number, then after the loop has finished, delete all stored rows.
Code:
for rowNum = 1 to x (some variable end row number which I already have worked out using End(xlUp).Row)
if x = y then
*storedRow = rowNum
end if
next rowNum
*
Lines with a * are the bits I can't work out. I've been trying to understand arrays by reading posts on what other people have done, but I can't fit (or fully understand) the reDims, or reDim preserves into my code. I've seen what appear to be quite complex ways involving uBounds and LBounds, but unfortunately I can't see how to use them.
All I want is to simply keep adding a row numbers to a variable, (i.e. row 2, 5, 20, 33, 120, etc) and then delete those specific rows.
I am looping through each cell in a range and I would like to loop in reverse order.
Dim CELL As range
Dim TotalRows As Long
TotalRows = Cells(Rows.Count, 1).End(xlUp).Row
For Each CELL In Range("C1", "C" & TotalRows)
CELL.Select
'Code here to delete a row based on criteria
Next
I have tried:
For Each CELL In Range("C" & TotalRows, "C1")
and it does not make a difference. I need to loop in reverse order since what I am doing in the loop is deleting a row. I am looking at a cell and determining its value. If the value is so much, then the row gets deleted. The problem is that the next row "moves up" one row (taking the pervious cell's address) and therefore the For Each Next loop thinks it has already looked at that row.
I have some numbers in a column that I need to copy 12 times (each one) into another column. The problem is that I got like 200 records that will be converted in 15000 aprox. I've uploaded an example of what I need,
View 3 Replies View RelatedI have a workbook that contains, say, 50 worksheets: the first two worksheets summarise the data and are static in that they don't move position. However, the next four worksheets contain certain data for any given month. Each time a new month comes along, say, November, I insert four new worksheets after the two static ones as a result October's four worksheets are simply moved down the line in terms of worksheet order.
I need a macro to refer to the first six worksheets only (not the other tabs). I opted for index referencing for each worksheet, ie one - six. Now within these six worksheets in any given month, I need to sort the data by a certain column. The problem: in sheets 1,4,5 and 6 I need to rank by column E, but in sheets 2 and 3 I need to rank by column C. I have stepped through the code, which works for sheets 3-6, but doesn't seem to refer to sheets 1-2.
Sub WorksheetLoop()
'
' Loop through an indexed number of worksheets; _
' & this ensures that the worksheet range is dynamic _
' and is able to adjust when new sheets are added/removed, etc.
'
'Dim ws As Worksheet
Dim i As Long
Dim ws As Worksheet
[code]....
What I am trying to accomplish....
If the input changes in D5, K11 will reset to $0.00..
Example. If cell K11 is set to $300.00, and the corresponding input in D5 is '123', when I change the contents of D5 it sets K11 back to '0.00'.
I am in need of VBA code so that I can fill out an input form generated by someone elses macro input box. (I am the user, not the one developing the input box).
I am working to streamline a whole cluster of macros and this input box is currently my bottleneck. When the input box pops up, instead of me manually typing, I want to autofill the space with "104" and then click 'ok' uisng VBA.
I can not modify the actual VBA that created the input box (ie make 104 the default) because other users need the box to be blank.
find out how a developer would change the original vba code, not how a user can interact with an input box by using vba.
I want to create an input box that will allow you to input the column number it should start in... so instead of it being fixed at A, you can choose column B, C, D all the way to the end if you like.
Sub SplitSheetsNoDelete1()
Application.ScreenUpdating = False
Application.DisplayAlerts = False
Dim Lmainsheet As String
Dim Lrow As Integer
Dim lcontinue As Boolean
Dim LColamaster As String
Dim lcolatest As String
'Retrieve name of sheet that contains the data
Lmainsheet = ActiveSheet.Name
'Initialize variables
lcontinue = True
Lrow = 2.....................................
I've worked on a solution for this thread (http://www.excelforum.com/excel-prog...-automate.html) but have been mentally challenged with how to avoid changing the loop counter in one of the loops I have used to resort an array of file names from the getopenfile dialog.
The aim of the shown code (see post 12 of the above link for attached file) is to check if the file containing the macro is included in the array returned by getopenfile while sorting the array of file names, and if so, moving it to the end of the array for "deletion" by redimming the array to exclude the last item. This problem of the open file being selected in the dialog may never arise, but... as the OP's request in the other thread was to allow two-way comparisons between numerous files, I've considered it likely enough to test for.
Here's the code I have settled for esp between the commented lines of hash symbols, which does change the counter (see the commented exclamation marks), but prevents an infinite loop (on my second try!) by using a second boolean flag of "HasCounterBeenChanged". Is there a better way of doing this? Or, alternatively (not in my thread title), is it possible to prevent the active file being selected through one of the arguments in the getopenfilename method?
I am working on some code that loops through a column of number values. Whenever it encounters a number value and a blank cell in an offset column, it places that number value into an offset cell (forming a separate column to be compared to another column in a separate sheet). I would like to take all the values in that new column and begin placing them in a new column in a separate sheet adjacent to another table. Most of the time, these values should match the adjacent values in the separate worksheet. However, if they don't match, I would like a new row to be created for that mismatched value.
For example. This is the first worksheet. So far, my macro loops through the column with rows 1-5. It looks in the offset cell(0,2) for Isempty value and then places that value into the offset cell(0,6)
text
1
text
text
[Code]....
For Each loop can be instructed to loop starting the bottom of the range. I know that a For To Loop can handle looping from the bottom up,
Sub Filterout()
Dim c As Range
Dim rng As Range
Dim i As Long
Dim lrow As Long
Dim counter As Integer
lrow = Cells(Rows.Count, 3).End(xlUp).Row
Set rng = Range("c2:c36")
For Each c In rng
If Left(c.Value, 1) "~~" Then
c.EntireRow.Delete
End If
Next c
i have a problem with a nested loop:
it seems like the first instance of the code is running the way i want it to run, but when it starts with the second instance, it does the first search and copy, but it seems like the nested loop is being ignored.
am i doing something wrong?
dan
==========================================================
Thanks to Aaron Blood for the find_range function. i also poached the lastrow function from somewhere on ozgrid, but I cant remember the name of the poster.
==========================================================
Sub new2()
Dim Org_Area As Variant
Dim Item As Variant
Dim Copy_To1 As Variant
Dim Cell_Ref As Variant
r = 1 ..................
Can't seem to figure out why my Do Loop keeps giving me an Error of "Loop without Do".
View 14 Replies View RelatedI have got a loop which is working fine but now i need another loop which will run till the end but need to repeat itself as soon the column x become 1 the highest number would be 3
here is my main loop A1 = 5000
and second loop need to run inside the this loop
Sheet1.Activate
i = Range("A1")
For b = 1 To i
If Cells(1 + b, 3).Value = "P" Then
Cells(1 + b, 29).Value = 1
Else
If Cells(1 + b, 3).Value = "S" Then
Cells(1 + b, 29).Value = 2
Else
If Cells(1 + b, 3).Value = "C" Then
Cells(1 + b, 29).Value = 3
End If
End If
End If
Next b
I have loops working in other loops. The macro is almsot working well. It does the calculation i want but it fails to stop a loop, because of that, the macro can't run the next main loop (c), which is to move to the next cell where the calculations must be run.
I attach a file. the troubleshooting macroation is Sub Itiration.
The code of this macro are bellow. Basically, the loop using d as counter run into an endless loop. I don't how to stop this loop without affecting the results which are calculated correctly.
Sub Itiration()
Dim CurCell As Object
Dim TempSum As Double
Dim d As Integer
For c = 3 To Cells(3, 4)
If Cells(11, c) > 0 Then
For i = 1 To Cells(10, c)
Do
Going through a loop, I am trying to load pictures into an image box (or alternatively into a label) one by one i.e. going through the loop the first time, I want to load picture 1, then on the second loop, picture 2 and so on. A bit like an automated slide show.
I have written a simple loop and have used the loadpicture function to load the picture into the image box. When the code runs, the image box only gets populated after the last run through the loop. I have tried using application.screen updating function and the image.activate function without success. It is a simple bit of code and I expect an easy problem to solve if you know excel vba well.