to modify this code that prints each sheet to a different printer on the network. I would like for the code to print a sheet that will be named "MEMO" at the beginning of each print job....
View 9 RepliesI recorded a print macro which prints to my default printer, others will be using this spreadsheet so I really need it to print to the same network printer. The printer address and name is: ironyan-fileBI44
How do I incorporate this into my code?
[Code] .....
I have the following macro........
Dim i
If ActiveSheet.Index = Sheets.Count Then Exit Sub
For i = ActiveSheet.Index + 1 To Sheets.Count
If Sheets(i).Visible = xlSheetVisible Then
Sheets(i).Select
Exit For
End If
Next
This macro starts at which ever sheet I am on and goes from front to end say 1 to 16.....my question is how do reverse the code to go to the next unhidden sheet from 16 to 1 ?
I guess this is a simple one but I am not sure of the best way to do it,
I have number of points recorded for everyday in an excel sheet where first column represents date, second column represents group third column represents line and fourth column represents point as shown in the example below
3 19 2222 4324
2223 4325
2224 4326
2225 4327
2226 4328
"3" and "4" represent the 3rd and 4th day of the month, "19" represents the group and 3rd and 4th columns rest are line and point numbers recorded (2222 is first line of day 3, group 19 and 4324 is first point of line 2222 of group 19 on 3rd day and so on....).
I need a macro (or formula) to copy the cells of the last day written in the sheet up to the last row to a new excel sheet, reformat them so that first column has the word "Date" in its first cell, second column has the word "group" third has "line" and fourth has point.
so in the example mentioned here I need it to copy the cells of day "4" including the group, line and point numbers and format them in the new sheet so that first column has "DATE" then 4 for the rest of the rows, second column has "group" and 19 in the rest of the rows, 3rd column has "Line" and all line copied up to last row, 4th column contains "point" and all points copied.
I have a workbook with a bunch of sheets and I am interested in the sheets that begin with the letter "P". Each of these sheets is named "P###" with #s ranging from 0-9 and not consecutively.
On each of these sheets, the various formulas link to the cell O37. I would like to replace the value in cell O37 with the name of the sheet "P###" for all sheets that begin with P.
We have created a spreadsheet that needs to be protected as it is viewed by several users. We would like, if possible, to update this daily with as little human intervention as possible.
Can we use VBE and the on worksheet open event to unlock the password protection, update the sheet and then lock it again? I know that you can read who opens the sheet using code similar to the following but don't know whether the password protection can be "unlocked" utilising this method.
I am currently having a slightly annoying issue that only happens 50% of the time, that when trying to re-save a excel sheet on a network location. The network location is a folder on another computer. The same happens when I try and save it as a pdf, but only happens half of the time.
The message which pops up says something along the line of 'Saving as: 'File-ServerDocumentsexcelsheetexample.xls' ' and a sort of green loading bar appears. It does this for about 15 seconds then goes off.
I've checked our anti virus (which is eset) and I've set it to not real time scan network locations.
I have attached a example of the saving message: ExcelWarningExample.jpg
I've found some code which works to print certain pages with value in cell A1 but I need to print dynamic ranges on some of the sheets as they will have filters on so the rows ranges will be different each time.
So far this is what I have but the dynamic range part is not working:
VB:
Sub Print_All_Worksheets_With_Value_In_A1()
Dim Sh As Worksheet
Dim Arr() As String
Dim N As Integer
[Code] ....
I am having trouble disabling the "Preview" button when calling Application.Dialogs(xldialogprint) in XL2003. I have an xlSheetVeryHidden worksheet containing a form which is made visible programatically when the user wishes to print a copy (code below). I want the user to be able to have access to the functionality of the xlDialogPrint dialog (i.e. select desired print destination, number of copies, pages per sheet etc.) but I also want to prevent them modifying the page setup of the protected worksheet by initiating a preview from the print dialog.
Private Sub btnPrintReturnForm_Click()
wbkRUSC.Unprotect sysPass 'unprotect workbook to enable changes to sheet visibility
' (sysPass is project constant string containing password)
shtStaffForm.Visible = xlSheetVisible 'make staff form visible
shtCalc.Visible = xlSheetVeryHidden 'hide main calculator in case user gets smart and hits..............................
In column A, I have many entries such as AA-1, AA-2, BB-1, BB-2, AA-3, etc.
How do you count the number of entries for only those beginning with "AA" or beginning with "BB"?
I have a sheet that I want to have a double line border around the outside. Thats easy if there were a set number of rows but in my sheet the number of rows will depend on the size of the rows because of the different amount of information in each cell. So how do I make it print a border around the entire sheet no matter how many rows are in the sheet??
View 9 Replies View RelatedOk so i have 2 sheets. Sheet 2 is a form that needs to be printed.sheet one will have data pasted into it by the user. The data will be placed in column a and b. If a has data in it then so will b. Now I need the macro to identify if data is in a then the macro needs to then copy a and paste special into A18 on sheet2 then copy b and paste into A6 on sheet2 then print sheet2. Repeat this process to every row as long as A has data in it.
View 3 Replies View RelatedI have a spreadsheet with approx. 100 sheets, 1 sheet for each customer. The tabs are named by customer number, formatted ###.## where the 3 digit code represents the country and the two digit code represents the customer. For instance, the country code for France might be 001 so the customer accounts in France would be 001.01, 001.02 etc.
We have 4 area managers over various countries, and I'm trying to create a macro that would allow me to print all of the customer statements relating to a certain manager. For instance, manager #1 manages 5 countries, their codes being 001, 023, 057, 101 and 109. How can I code a macro to look at all sheet names that begin with either 001,023,057,101 or 109 and print those sheets?
I have a table in a separate sheet that has all customer numbers, customer names, country and area manager...
I have a spreadsheet exported from Access that contains each department's budget information (used, remaining, etc.).
I want to create a command button that when clicked will create a separate PDF for each worksheet. I want each .PDF file to be named the same as the Worksheet name.
I am using a macro with the code below to print the active sheet.
Sub MyPrintOut()
ActiveSheet.PrintOut
End Sub
I assigned the macro to a rectangle. My only problem is that when i print the sheet i can see the rectangle, is there a way around this? I know that i can set the print area but each sheet has a different setup, i tried using .Visible = False for the rectangle but it gave me a few errors.
I have protected a workbook with a hidden sheet. I am trying to save the hidden sheet to a .pdf format.
It works well until I hide the sheet. I see from other post that the .select is a big part of my problem but I'm not sure how to get around it.
I prepared this code for calculate row count. Here I am showing the result in msg box. But I want to store/place this value in another sheet.
Sub myrows()
Dim rows As Single
rows = Sheet1.UsedRange.rows.Count
MsgBox (rows)
End Sub
I know that there is an easier and shorter way of doing this;
View 6 Replies View Relatedi have a buttion on a whole heap of worksheets that is linked to this sub. I want it to print the range on one sheet of paper. though it will print over 4 sheets.
View 2 Replies View RelatedI have an array and I want to graph it. I don't know how to do that so I am trying to print it to a sheet and graph the data that way.
This is my array:
blkhist(service, 1) = DateDiff("d", blkstart, rawdata(currentdate, 1)) 'x axis values
blkhist(service, 2) = rawdata(currentdate, 16) ' y axis values
blkhist(service, 3) = blkcart 'series #
I have 7 digit values in Col B12: down. I have sheets with names that match any one of these values. Is it possible for a macro to print all sheets in my workbook whose name matches one of the values in Col B cells 12:down??
I have a sheet that I would like to print to one page (11x17, landscape) and have it take up the majority of the page. The largest the sheet will ever be is data in rows 1 - 71, and columns A - AC. Right now I have it set up so that when i click on the button, the print dialog opens up and no adjustments are needed to print to pdf in 11x17 for the maximum amount of data.
Overall what I am trying to do is have the zoom change when rows are deleted (columns will always be A-AC). The top 5 rows and bottom 5 rows will always be there. I want the top and bottom margins to be the same on the pdf even if 10 rows are deleted in between.
Basically Im crap at excel and need to start learning the in's and outs more but I have drafted up a double sided spreadsheet that I would like to run a series of prints 'inhouse'
I would like it if I could insert an overlay serial number on the sheet that would enable me to carry out future prints adding an incremental number to the serial number EG printing off 100 prints where the serial number runs from
CODA/BL1_00001
CODA/BL1_00100
IS this possible using general tool tricks of the day ie VB, macros or does an add on program exist that will enable this to be generated on a fly between the program and the printer.
I need a macro to have the copy of selected cells on sheet1, and paste it on sheet2 of the same workbook, whenever I take the print of the sheet1. My requirement is that Each time when I take the print, the selected items get pasted simultaneously on next available cells on sheet2.
Example of my worksheet is attached : Example.xlsx
How to print multiple sheet using one command ?
View 3 Replies View RelatedI thought I solved it, but it was on a different workbook. I am not in pagebreak preview and it's not password protected. Why can't I insert an object to create to assign my macro?
View 10 Replies View RelatedI have been using this to print multiple sheets. The only problem is if you want all sheets in the workbook you have to check every one. How would I add an option to 'print all'? But I still wouldn't want to print the hidden sheets.
Option Explicit
Sub SelectSheets()
Dim i As Integer
Dim TopPos As Integer
Dim SheetCount As Integer
Dim PrintDlg As DialogSheet
Dim CurrentSheet As Worksheet
Dim cb As CheckBox
Application.ScreenUpdating = False
' Check for protected workbook
If ActiveWorkbook.ProtectStructure Then
MsgBox "Workbook is protected.", vbCritical
Exit Sub
End If...............
I'm trying to call a form I've created when the Print command is run (so when someone prints the document, the document number gets incremented.
I believe I have the command buttons setup correctly, as they aren't giving me any errors in the code, but when I do click the print button, the form isn't popping up. Could anyone give me a hint as to the direction to take?
I'm trying to create a macro that will print the active sheet to PDF, and automatically save it using the contents of cell B3.
Sub SavePDF()
ActiveWindow.SelectedSheets.PrintOut Copies:=1, Collate:=True, ActivePrinter:="Adobe PDF"
Dim filename As String
filename = Range("b3").Value
End Sub
It seems to do what I want, except name it using the contents of B3. I have very limited VBA knowledge. I've searched for this, and it seems many others are trying to accomplish something similar.
B3 is a formula that will display alpha-numeric characters (such as C0123456). I copied the cell and used paste special>value thinking that may have been preventing it from automatically saving the file as "C0123456", but it still didn't work.
The sheet will always be 2 pages, and I think the code will always ensure Adobe PDF is selected as the printer.
I'm searching through data, filtering it under certain criteira and then based on those results, i print out infromation to another worksheet.
I enclosed an example since I'm useless at explaining these things. In the example, lets say I want to find all data that has "Planned WW = 06-04" and has "Env = fake". then once I find this information I want to print the "Title", "Description, ""comment " to a cell in worksheet 2.
I think the formula is something like below but i'm not sure how to say only print whats in the Title, Comment Description cells.
=(--(Sheet1!A2:A50000="06-04"),--(Sheet1!B2:B50000="fake"))