I have created a sheet to calculate a resturant bill that need to be printed for each customer. I am trying to creat a command that will print the sheet up to the last item in the bill "sheet2". So I need the printin area to change according to the number of itmes.
This is probably a VBA thing, but there might be a simpler solution. Either would be grand!
Basically, I have a four sheet workbook that needs to be printed out in its entirety (no problem doing that ); however, I would like the final sheet (called "Room Data") to be printed, let's say ten times.
So basically I'd get a single print of the first three sheets and ten of the "Room Data".
Any ideas on how to do this without having to manually print the final sheet multiple times or creating ten identical sheets in the workbook?
I am trying to set up excel sheets for documents that we print often. I would like to print them with page numbers in right footer that increases sequentially.
setting up a macro. But very time I print it starts from same number instead of the number after where I left off. Example: if I print today with page numbers 1 through 12, next time I want it to print number 13 through whatever no of copies printed.
Here is the code I copied from one of the threads here:
I need the page number in right footer and also the macro to save the last number printed.
I have a workbook that has a single sheet in it, in cell G2 I want to insert a page number where if I print of multiple copies on the first sheet it will say 1, the second 2, the third 3 and so on and so forth.
I am working on a "3 worksheet" excel workbook. The first worksheet does not require any header.
I'd like to enter data into the second sheet (say cells A1 and B1), and use VBA to pull from those cells to generate the same custom header for both the second and third worksheets.
For example, I'd like the header to pull "# 123456" from cell A1, and "789" from B1 in sheet two, putting them in a centered header for both sheets two and three (same reference cells from sheet two for both, not new values of A1 and B1 from sheet 3 for sheet 3 header). I'd like to format in a way that looks something like this:
I'm currently running Excel 07, and was able to pull from a cell on one worksheet into that sheet's header but couldn't get it to span multiple sheets.
I have a workbook that has about 50 pages on 7 different tabs. I would like to add a print button next to each page that would only print that specific page or range. Is there a way to do this? For exampe I have a page that is named equipment log, Cells A1 through A33 are what I want to print if someone hits the print button. I don't want it to print the entire worksheet because it is 51 pages.
Is it possible to create a command button to print the sheet, and, have a prompt come up and ask you to enter a date? Then that date is entered in a cell and the sheet prints? Just not sure where to start. I know how to make the command button and get to the view code for the button.
I've found some code which works to print certain pages with value in cell A1 but I need to print dynamic ranges on some of the sheets as they will have filters on so the rows ranges will be different each time.
So far this is what I have but the dynamic range part is not working:
VB: Sub Print_All_Worksheets_With_Value_In_A1() Dim Sh As Worksheet Dim Arr() As String Dim N As Integer
I am having trouble disabling the "Preview" button when calling Application.Dialogs(xldialogprint) in XL2003. I have an xlSheetVeryHidden worksheet containing a form which is made visible programatically when the user wishes to print a copy (code below). I want the user to be able to have access to the functionality of the xlDialogPrint dialog (i.e. select desired print destination, number of copies, pages per sheet etc.) but I also want to prevent them modifying the page setup of the protected worksheet by initiating a preview from the print dialog.
Private Sub btnPrintReturnForm_Click()
wbkRUSC.Unprotect sysPass 'unprotect workbook to enable changes to sheet visibility ' (sysPass is project constant string containing password)
shtStaffForm.Visible = xlSheetVisible 'make staff form visible
shtCalc.Visible = xlSheetVeryHidden 'hide main calculator in case user gets smart and hits..............................
I have a spreadsheet with 28 visible tabs. When I select all tabs and print, I get 3 cover (or banner) pages...I like having the first banner page, but the other two are in the middle of my report. I assume excel is sending 3 print jobs and I'm not sure why.
I've seen a couple of posts regarding this issue when using VBA, but I'm not using VBA...just selecting all the sheets and sending a single print job, but get 3 banner pages.
I'm using VBA code to select several worksheets at once, and print them. The code runs fine, but the result is multiple print jobs, not one job. This is OK when printing to the printer...but undesireable if you want to print to a pdf file, for example.
I've searched the site and found some references to this possibly being an excel problem. Is that true?
I've also checked the page setup setting to make sure that the print resolutions are all the same...that doesn't appear to be the problem either.
I'm trying to create a command button on my sheet that when clicked will find all rows in column u that read Engineering Evaluation and then copy certain cells from that row to another sheet. The kicker is that this button will be used over and over again as more entries are entered into the log. I only want each row counted once.
Right now I get a run time error for the "For Each Cell In Application.Intersect(Range("u:u"), target)" line.
I have a sheet that I want to have a double line border around the outside. Thats easy if there were a set number of rows but in my sheet the number of rows will depend on the size of the rows because of the different amount of information in each cell. So how do I make it print a border around the entire sheet no matter how many rows are in the sheet??
Ok so i have 2 sheets. Sheet 2 is a form that needs to be printed.sheet one will have data pasted into it by the user. The data will be placed in column a and b. If a has data in it then so will b. Now I need the macro to identify if data is in a then the macro needs to then copy a and paste special into A18 on sheet2 then copy b and paste into A6 on sheet2 then print sheet2. Repeat this process to every row as long as A has data in it.
I inherited a spreadsheet that had an userform where the user checked off which 'pages' he wanted to print. The Ok button routine used if statements to run a routine for each 'page.' Here's an example of the original code for one page:
Sub Button2_Click() Sheet7.Activate Run "HorizontalPrintStuff" 'generic landscape pagesetup With ActiveSheet.PageSetup 'specific pageset settings .RightFooter = " Construction Assumptions" .PrintArea = "CONSTRUCTION" 'the named range to print .Zoom = False .FitToPagesTall = 1 .FitToPagesWide = 1 'this changes depending upon the page selected End With ActiveSheet.PrintOut End Sub
The problem was it printed each page as a separate print job; and if you print to adobe, you get serveral files, not one file. That and it took a long time to run.
So I tried a different tack. If the checkboxes has true, then the printarea is set to that named range. If there were more than one named range on a sheet to be printed, I consolidated them. I did this with a bunch of if statements - very cumbersome.
Sheet3.Activate 'Sheet3.ResetAllPageBreaks 'disabled due to errors Run "HorizontalPrintStuff" 'generic landscape pagesetup With ActiveSheet.PageSetup 'specific pageset settings .PrintArea = "DEVBGTALL" 'the named range to print .FitToPagesWide = 4 'this changes depending upon the .FitToPagesTall = 1 End With
I haven't shown all the code cause it goes on for 12 sheets containing 16 different printareas.
My current muck ups are .....
1) it prints every printarea/named range on a given sheet (I took out all the if statements trying to debug everything.) Is there another conditional argument that allows for multiple 'trues'?
2) the pagebreaks in printarea/named ranges that are multiple pages (like a 48 month schedule) won't stay set. I've tried both VPageBreaks(3).Location:= and .VPageBreaks.Add Before:=
3) the Sheet1.select false argument is always adding a random sheet to the end of the print job. Don't know why.
I can do all this in a recorded macro, just not the selection userform. I've thought about copying to another sheet or hiding columns and rows then printing, but that seems just as cumbersome.
To recap, i want to print out, as one print job, multiple printareas from mulitple sheets, based upon checkbox selection on an userform.
I have a work book that consists of 15 sheets. Sheets 1-14 are for different stores yearly data and sheet 15 will be an overview of the each month but with all the stores on it.
column B-M have the heading Jan-Dec and will have data in the rows below.
What I want excel to do is by using a command button on sheet 15(Overview) update the overview sheet with the data that is in the column, corresponding month that is stated in cell A1 on sheet15 from each sheet of the work book.
In tab Sheet1 there is Commandbuttons named "Sheet2" & "Sheet3". If i press "Sheet2" then i will be directed to sheet2 tab, same as "Sheet3". In tab Sheet2 & Sheet3 there is commandbutton "Sheet1", if i press the button then i will be directed to default tab which is sheet1.
i have a workbook , workbook A , workbook A has 5 command buttons with different names on them., i want a macro code , i have some data on workbook A as well , as soon as i click one of the command button suppose user click on B, data gets copied and gets pasted into the workbook B , which is in different folder .