I recorded a print macro which prints to my default printer, others will be using this spreadsheet so I really need it to print to the same network printer. The printer address and name is: ironyan-fileBI44
How do I incorporate this into my code?
[Code] .....
to modify this code that prints each sheet to a different printer on the network. I would like for the code to print a sheet that will be named "MEMO" at the beginning of each print job....
View 9 Replies View RelatedI am creating a training matrix that will be used in a number of locations. Some only have a few staff members whilst others have lots. I want each location to print a list on a formatted sheet but I want to set it up so that the locations with fewer people don't end up with lots of blank lines.
View 9 Replies View RelatedIs it possible to retrieve the network name of the local workstation and if so how?
View 2 Replies View RelatedWe have a form that is completed by our employees and emailed to a central group email address that up to 8 employees within our team can access. When one of our 8 team members open the file sent they need to add comments to it and then save it in a central directory on one of our network drives.
Now the problem I have is that we all have the network drive mapped to a different letter.
Is there a way that I can have a macro (see below for current macro that does not work) save to a network path and not a drive letter.
I have a command button in a spreadsheet with the following code attached to it
View 4 Replies View RelatedAs above i have a macro which opens a workbook which is on a network drive. This works fine for my multiple users...however i have discovered that if they do not have the drived mapped with the same drive letter at the start...it will throw up an error advsing that the file does not exist. Is there any way to by pass this.
Ex - "TestFile.xls"
File is stored in "E:NetworkTeam1Testfile.xls"
However, some users have access to this file and it is mapped as E:, but some users have been mapped as F: The advisors who have been mapped as F: cannot access the file. Is the VBA/Macro smart enough to bypass the drive letter and just search the rest of the past...NetworkTeam1Testfile.xls".
I have code below that works well most of the time. One of the cases below will not work. It insists on requiring a name and password.
(note: it is the only Windows 2000 operating systems)
I want to enter this in my case line to automatically add the username and password.
Let's say the username is: "dave" and the password is: "happy"
How can I add this to this part of the code?
Case "DJ"
strfilename = "\DAVEJONESDavesProposals" & strfilename
Sub Save_and_SaveSalesman()
Dim strPath As String, strPath2 As String, CurrPath As String
Dim WB1 As Workbook
Dim WB2 As Workbook
I have written a function (with the help of the good folk on this wonderful message board) that is able to check whether a given spreadsheet is currently being used by someone at my work. There are potentially multiple users for the workbooks that my system needs to access. FYI, I work in a bank so we have a pretty good network.
The code for my function, as well as the TestOpen(-) function that it uses, is below.
Ideally, if a workbook my system needs is currently being used on someone else's computer (Case=1 in Select statement, then Err0) I would like to be able to have a userID returned to me so that I know who I need to call to shut the model.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Function Open_Selected_Drone__EXEC(fs, fileLocation, fileToOpen, testOnly)
Application.ScreenUpdating = False
myName = ActiveWorkbook.Name
Application.StatusBar = "Checking availability of " & fileToOpen
iOpen = TestOpen(fileLocation & "" & fileToOpen)
Select Case iOpen
Case 0: ' the file has been found and is not in use
rv = "not in use"
If Not testOnly Then Workbooks.Open Filename:=fileLocation & fileToOpen, WriteResPassword:="j"
The old version of this message board used to have an "insert code" button. I cant see it anymore. Am I simply meant to paste code into this message box now?
I'm trying to call a sub in an exce. file that resides on our network drive so that multiple users can access the programs that I develop and I can get VBA to open the file but I can't get it to open the sub titled "DCU". I keep getting the following error.
Cannot run the macro DCU. The macro may not be available in this workbook or all macros may be disabled.
Here is my code that errors.
Option Explicit
Sub DESCRIPTION_CLEANER_UPPER()
Application.Visible = True
Workbooks.Open Filename:= _
"\Cansvp01grp_01fCommonCommon-PartsPrcngMacrosMacros.xls"
Application.Run "DCU"
End Sub
Is there a way to test for an active default network printer?
In my module the code sets the paper size and a few other printer settings, if my default network printer is down or offline the code fails.
If I could test for active default printer I could remove this error.
We have created a spreadsheet that needs to be protected as it is viewed by several users. We would like, if possible, to update this daily with as little human intervention as possible.
Can we use VBE and the on worksheet open event to unlock the password protection, update the sheet and then lock it again? I know that you can read who opens the sheet using code similar to the following but don't know whether the password protection can be "unlocked" utilising this method.
I have 2 workbooks, one containing one worksheet that acts as a Template a second that has some code attached to a button that uses the Template to create new worksheets based on the Template. The problem I have is that when I run the code over a network I always get a read only worksheet created. I need it to be readwrite. I have used sharing on the Folder where the 2 workbooks are located so it accessable over a network. There is no problem when I run the code on a standalone machine.
Private Sub CommandButton1_Click()
Dim tClient
Dim tAddress
Dim tPhone
Dim tItem
Dim cOriginalLoan
Dim cAgreedInst
tClient = Client
tAddress = Address
tPhone = Phone
tItem = Itm
cOriginalLoan = loan
cAgreedInst = Inst
Sheets("swbrd").Select
PathName = Range("A196").Value 'Here is where the full path to the Template is found.................
I wrote a macro that runs perfect when started from my pc, but if started from a different ps which is logged into the same network it doesn't run, also the macro is stored on the server. I have a code in the private section of the workbook:
Private Sub Workbook_Open()
Call FINAL
End Sub
then the macro 'FINAL' is stored in the 'Modules' section and starts with:
Sub FINAL()
'this part opens the Edit/Links dialog from which the user has to choose the relevant model
Dim Which_financial_model_contains_the_data As String
ActiveWorkbook.ChangeLink Name:= _
"T:DEALSSSalsa (Project)Financial modelsProject Salsa Model - BASED ON SPONSOR CASE - b - 20061214.xls" _
, NewName:= _
"Which_financial_model_contains_the_data" _
, Type:=xlExcelLinks
when I open a file, called "A", I want it to automatically open another file, which is shared on the network, called "B". I've tried using the "IsFileOpen" routine and a few other sets of code that I've found on the internet but none of them solve my problem.
If "B" isn't open on any computer and I open "A", there is no problem, and if "B" is already open on my computer when I open "A" again, there is no problem, but if "B" isn't open on my computer and is open on somebody else computer, "B" won't open on mine when I open "A", the code assumes that because "B" is open on someone elses computer, "B" is already open on mine.
I have a new workbook that needs to be printed to a specific printer regardless of who the user is. I am happy with the method used for doing this using the PrintOut function, but am trying to work out what to do in the event that the user does not have this printer installed. The logic, not in true VBA syntax, is as follows;
' Check Printer
If <This Printer> Is installed Then
Printout using <This Printer>
Else
Install <This Printer>
Printout using <This Printer>
I found a useful post about ascertaining whether or not a printer is installed, but can't find anything about actually installing a printer via VBA.
I want to be able to check when workbook opens if a particular Excel file is open or not by having a true or false in a cell. This works fine if I have it open on same computer, but if I log on to another computer over a network and run same workbook it won't pick up if file open or not. I have tried various ways from this forum for file paths over network including eg. C:file or '\path on networkfile or N:pathlocfile etc. Nothing apears to work. If I check to see if file open from a different computer than the one the file is open on I receive standard message file already in use etc.
View 2 Replies View RelatedI have created an application for users that requires the user be connected to the network. I wanted to do a check to see if they are connected, and if the user is not connected they would get a message box telling them that they need to be connected to the network, then the workbook would close. Below is the code I have, but when a user is not connected they do not get my messagebox, instead they get the excel error message "excel run-time error '52': bad file name or number", and the debugger line that gets highlighted is in the function DirExists that checks the length of the directory of the file path: Len(Dir(strpath))
Option Explicit
Function DirExists(strpath As String) As Boolean
If Len(Dir(strpath)) = 0 Then 'this is where the debugger highlights
DirExists = False
Else
DirExists = True
End If
End Function
Private Sub Workbook_Open()
Dim strpath As String
Dim strfile, strfile2 As String
strpath = "\n530fs1PCLFileSharespcl_repositPricing_ToolsPAT"
If Not DirExists(strpath) Then............................
All sheets are basically the same except some minor values, names and addresses. There is one page per sheet and all pages are in portrait format. The print preview shows all the pages in order but when I print it, it makes multiple print jobs of 1 to 2 pages each and prints them all out of order. I don't know why it is splitting up the workbook or why it changes the order. I print and reorder these weekly, which is a major pain. It comes out in the same order each time but it is the wrong order.
View 1 Replies View RelatedI am trying to have a file print in legal size if I have 56 lines filled in
otherwise print in regular letter size. Does anyone know how to write this
in VBA.
I've found some code which works to print certain pages with value in cell A1 but I need to print dynamic ranges on some of the sheets as they will have filters on so the rows ranges will be different each time.
So far this is what I have but the dynamic range part is not working:
VB:
Sub Print_All_Worksheets_With_Value_In_A1()
Dim Sh As Worksheet
Dim Arr() As String
Dim N As Integer
[Code] ....
Since upgrading to Windows 2007 (I was already using Excel 2007) I am having issues with the content in the cells on the worksheet not appearing the same on Print Preview and when I print. On the worksheet the cell show to be at the best fit both horizontally and vertically. When I look at the contents under print preview, the contents are squashed from the top and cut off from the left. This happens whether I have the format in Top or Central align and is even worse if I use Bottom align. It is also somewhat worse if I have thickened boarders.
I am using TrueType Fonts.
Using Excel 2010: I have 2 rows (A4:J4 & A5:J5) selected as print titles that I would like to be printed at the top of selected pages. Currently, my document is 3 pages long, and I would like to have the print titles only applied to the first 2 pages. More data will be added in the future on pages 1&2 but the last page (whatever page number it ends up being) should not contain the selected print titles.
View 2 Replies View RelatedI just converted from Excel 2003 to 2007 and print previewed a worksheet and find a tiny image with a small portion of the print area. When I look at the sheet in page break preview mode, I see the 8.5 x 11 sheet broken up into approx 77 smaller sheets. When I try to move the page breaks to include the whole sheet it states the change cannot be made as it will result in an image less than 10%. I have attached two images - the first shows the print preview I get, and the second show the multiple pages when I view in page break.
View 4 Replies View RelatedI am having trouble disabling the "Preview" button when calling Application.Dialogs(xldialogprint) in XL2003. I have an xlSheetVeryHidden worksheet containing a form which is made visible programatically when the user wishes to print a copy (code below). I want the user to be able to have access to the functionality of the xlDialogPrint dialog (i.e. select desired print destination, number of copies, pages per sheet etc.) but I also want to prevent them modifying the page setup of the protected worksheet by initiating a preview from the print dialog.
Private Sub btnPrintReturnForm_Click()
wbkRUSC.Unprotect sysPass 'unprotect workbook to enable changes to sheet visibility
' (sysPass is project constant string containing password)
shtStaffForm.Visible = xlSheetVisible 'make staff form visible
shtCalc.Visible = xlSheetVeryHidden 'hide main calculator in case user gets smart and hits..............................
Sharing excel file over network for use by multiple persons. File has suddenly stopped opening giving message "File cannot be found" etc.... I back the file up daily to my hard drive so didn't lose much.
This is the second time this has happened. File size is only 300Kb.
Excel seems to be creating temp files to the same folder, then gave a message saying changes could not be saved to the excel file.
Ran the corruption program from this site, it could not open the file.
My coworkers and I use a couple of Excel documents to store statistics. The document is on a network share. We all have Office 2010, my coworkers are on Windows XP, I am on Windows 7.
If I open the document and make changes, then save it to the network location I can open the document later and see the changes but my coworkers do not see any changes I have made. Also If my coworkers make changes to the document the 3 of them see the changes but I do not.
If I go straight to the network share the timestamp on the document only changes for changes I made.For example if I go to servernamefoldernamestats.xls and add data to the file. Then save and close it. I can reopen the file and my changes are there.
Tomorrow Coworker 2 opens the same file from the same location but it has data from 2 days ago, with a timestamp of 2 days ago and my data is missing. They then reimput the data I entered, and add todays data. Then they save it and close.I open the file it has my data from yesterday, but not the new data entered by coworker 2.
I am trying to display the number of network days ( Mon - Fri) from start to finish in a colour format
I have got so far with a spredsheet which is shown in table 1.
On table 2, I have shown what I would like to happen but I am baffled by what formula / conditional formatting is required.
I'm trying to put some visual basic out on the network drive at work so I created a book and called it Macro.xls. I then saved the code within that book and saved it out on my network. I'm now trying to run that code by calling the sub and don't know how to do that.
View 7 Replies View RelatedI currently have the following ...
View 8 Replies View Related