I have the following code that updates columns A,B and C. The columns are hidden and have some 500 plus rows. Cell E2 reads the last entry in column A (a date, such as 1/22/10). I would like to add a line in the code that, if cell E2 equals todays date, will prevent a second update and display a message "Update Complete".
View 12 Replies
I am now trying to combine 2 sections of code but being a complete VBA novice I'm stuck, where should the second Sub go so that it works,
View 4 Replies View RelatedI am trying to combine the text values of several formulas in addition to adding some text (punctuation) in between.
Here is the data that I am trying to combine
C14: 2013
C15: Period 6
C16: Week 1
In Cell C13, I would like to have this value returned: "2013 - Period 6, Week 1"
Is there such a way to do this?
I have some text I wish to add some content to the front and back of it. i.e. the text in the cell is "214.212.134.62" and I want to add "http://" to the front of it and ":9999" to the back to it, so it looks like "http://214.212.134.62:9999" in a different cell.
View 3 Replies View RelatedI was wondering if there's a way to make the numbers in a column over 50 (as an example) green and numbers less than 50 red. (The numbers in this column are the sums of other cells, but I guess that doesn't really matter.)
This way when there's a lot of things going on you can see what's what without filtering or rearranging.
I want to display value from cell A11 to J11, and when the button is clicked, I need to transfer the value to underneath the last value on sheet “Results” leaving 1 space. So in my example it would go into row 28. On other occasions there may only be 1 value for example on results, if this was the case the row from Additional parts would have to display in row 7.
Then if I were to add another value in additional parts I would then want this to display in row 30 in my example. So again leave a space and add the line.
I am trying to add code to a sheet with one code already on it.
Each of these 2 sets of codes work just fine alone, but I do not know how to make them both work on the same sheet.
A working sheet with the code I want to add is attached. The code I would like to add is on the same sheet (pasted on the the page). (See attachment)
I've added the following code into macro i have assigned to the button on this attached worksheet which deletes any row where the cell in the A column is blank.
View 6 Replies View RelatedHow would I add a nice progress bar to the following
View 14 Replies View RelatedI have the following code which works plus a formula in cell range G5:G123....how do i add the the formula to the VBA code
Formula =IF(F5"".F5< today () +3 )
I have a code that opens another WB, and gather data from it. most of the lines look like this:
HTML Code:Â
wb.Sheets("Data").Range("K" & Rows.Count).End(xlUp).Offset(1) = wb2.Sheets(1).Range("M49").Value
However i need it to gather the sum: M49+M50, how can i do this without importing both values and then adding them in a 3rd column, like i am currently doing.
How do I make a Command Button and put event handling code (in the VBE) to handle the click event?
View 2 Replies View RelatedI have just discovered the exciting world of the additional controls that can be added to userforms. provide me with some sample code to make a progress bar increment and to activate a windows media avi file from a user form. I only need to know the code (I know how to add the controls etc)
View 9 Replies View Relatedadding an second range (J1089:AI1147) to the follwing code.
Code:
Sub Clear_Range()
Application.EnableEvents = False
With Range("H3:AL1058")
[Code]....
Code:
Sub Final()
Dim NameCell As Range
For Each NameCell In Sheets("! Names").Range("B1", Sheets("! Names").Cells(Rows.Count, "B").End(xlUp))
[Code]....
I want to pull data from ! Names. This code already Renames a new sheet from the ! Names sheet and also puts there name in cell C2 and phone number into cell C3 of the created sheet. I want to put more data from the ! Names sheet. How would i go about adjusting current code to do that?
VBA COde for adding CC, BCC to email sent from excel. I already have the below code to send email from worksheet, i need to add a copy email.
Private Declare Function ShellExecute Lib "shell32.dll" _
Alias "ShellExecuteA" (ByVal hwnd As Long, ByVal lpOperation As String, _
ByVal lpFile As String, ByVal lpParameters As String, ByVal lpDirectory As String, _
ByVal nShowCmd As Long) As Long
[Code].....
I have some code which adds a series of textboxes at runtime depnding on some info on my spreadsheet.
Due to these textboxes being added programmatcally, they curently have no macro's assigned to them.
I was wondering if there was a way of adding code to the textboxes at runtime.
Dim choosebefore As MSForms.Control
Set choosebefore = Me.Frame1.Controls.Add("Forms.Textbox.1")
With choosebefore
.Name = "Before" & i
.Left = 0
.Top = (((i * 18) - 18) - 8) + 6
.Width = 24
.Height = 15.75
.Visible = True
.TextAlign = fmTextAlignRight
.Text = Chr(149)
.SpecialEffect = fmSpecialEffectFlat
.BorderStyle = fmBorderNone
End With
A procedure residing in the "ThisWorkbook" module has just added a new worksheet into the active workbook. I now want this same procedure to write a set of code into this new sheet's code module.
Solution 1:
Create a worksheet before run-time that is already set up with the code you want behind it. Then, use this worksheet as a sort of "template" when you want to create a new worksheet as opposed to using the worksheet.add method.
Question:
I can use solution 1, but isn't there a way to insert the code on the fly?
Im trying to autimatically insert a RTD formula in a cell but it is failing trowing the error 1004 : 'runtime 1004: application-defined or object-defined error'
Here is the ....
The ultimate goal is to create a Userform at run-time.
The problem is writing event code for that Userform.
The current situation is:
I have a userform. (Created with the VBE, not at run-time.) There is one command button on that userform. The code module for that userform is this
Option Explicit ...
Workbook performs perfectly 95% of the time but every now and again I have this issue where the formular do not calculate (it is set to automatic).
I have a workaround of doing a find and replace across all the worksheets of "=" replaced with "=" and this solves the issue.
The problem I am having is that some of the sheets are protected and some are not. The code I am using for the find and replace is as follows...
VB:
Option Explicit
Sub ChgInfo()
Dim WS As Worksheet
Dim Search As String
Dim Replacement As String
[Code] .....
I need to add to this code the unprotect command and then reprotect only the originally protected sheets?
I am sure these is a better way of doing this but im really short on time. This issue only occurs 5% of the time. the other 95% the formula all calculate fine!
I just need a way of doing the find and replace for = to = across all sheets in the workbook regardless of the sheet protection!!
The code below resides in my personal.XLS Module. When I step through the code everything works till it reaches the point in red then I get the pop up that says excel needs to close and asks to send or not to send.
I noticed that if I choose recover my work and restart excel and I look at the code in THISWORKBOOK of the recovered workbook that the code I wanted placed there is there.
Can anyone explain why this is happening? I have the macro's security set to low and a check mark in the trust access to vb projects.
Any Idea's how to fix this?
Code writes decimal numbers next to each other instead of adding. I have the following code on a very simple form:
View 5 Replies View RelatedI have a macro which I use to do all sorts of routine things on a spreadsheet for my employees. (you guys helped me with that too. thanks)
I would like to add a command button to this sheet to run series of code and I want to add this to the final step of a macro.
Question, is there a series of code, which would
1. create the command button on the active sheet, and
2. add the required code to the command button, and
3. embed that button and code onto the active sheet all at once.
?
I need to do this regularly so it is a currently manual process I am trying to replace.
Ex. of code I want placed:
Rows("1:1").Select
Selection.Font.Bold = True
This is not the exact code which I will use, but it will help me to understand what I would have to do to make it work.
I have a spreadsheet with 20 or so columns but that number can change at any time. I need my code to by dynamic so if a column is deleted (or added) my code will still work.
Each column has a name in row 2 and I'm trying to use that in order to make everything dynamic. For example, my code counts the number of blue cells in colums D4:G68, but now if someone adds a column before column D, everything gets messed up and it will still count the cells in D4:G68 but I want to use E4:H64 now. Does that make sense? I have made code that searches the column names and returns the column number to correspond to the name. How would I change this?
Range ("C8") = "= CountBlue(E4:G68)"
the code doesn't look exactly like this, I believe it is actually in R1C1 format
I'm just trying to add the "=" operator to the below "" operators, as this line of code presently doesn't account for any numeric matches, of which I have plenty, and DO need to account for! Gosh, might someone here know how to integrate such a thing into this code?
If Range("I3") Temp Then Range("I1") = Temp
I get some tables from SQL server but I like to add formula when the data transferred to Excel sheet
"Colum C" has date data from the SQL table
I have the below formula which I like to add into SQL code which can automatically work out the aged period on "Colum D" which is named as "Aged".
=VLOOKUP(TODAY()-C2,{0,"Current";31,"31-60";61,"61-90";91,"91-120";121,"121-150";151,"151-180";181,"181-210";211,"211+"},2,1)
I'm working with a column that contains dates. The dates are pulled from a system that doesnt always have dates in the format
mm/dd/yyyy => 09/26/2014
but instead sometimes
9/26/2014
or
4/7/2014
i.e., 0's are missing.
I'm looking for a macro that inserts these missing 0's
**So I suppose the criteria should be that if the cell is 9 characters long (including the "/"s), then it adds a 0 as first character**
and
***the cells that are only 8 characters, in that case there would have to be insert 0 again as character 1, and 0 as character 4 (if 0 is already added as first)***
I'll attach a file that contains dates : test.xls‎
Adding some additional code to prevent someone from saving the workbook under a different name. Currently if someone tried to enter data after the allotted time period, it would allow them to in any "unlocked" cells. When exiting or trying to save the file with this new data, they will get a message stating something to the effect that this is a read only file would you like to save as another name, which would allow the user to circumvent what I'm trying to accomplish. The end result would be they'd need a new spreadsheet.
[Code].....
I have 10 comboboxes - all require exactly the same list. Rather than having to copy the list 10 times in the coding - and changing the combobox name from listcode1, listcode2 etc, is there a loop code which I can add to do this for me??
Private Sub Userform_Initialize()
'Empty txtdate
txtdate.Value = ""[code].....
