Color Code After Adding
Sep 22, 2009
I was wondering if there's a way to make the numbers in a column over 50 (as an example) green and numbers less than 50 red. (The numbers in this column are the sums of other cells, but I guess that doesn't really matter.)
This way when there's a lot of things going on you can see what's what without filtering or rearranging.
View 2 Replies
ADVERTISEMENT
Mar 22, 2007
I have a column of cells formatted with different colors to represent a range of values. I want to know if that a formula or VBA I can use to I sum up these range of cells with the same color.
View 10 Replies
View Related
Dec 12, 2008
I have a free form scribble in Excel that I would like to change colors with VBA code, or even from a cell reference, either one would be ok. Is there a way to do this?
View 10 Replies
View Related
Sep 9, 2009
I am now trying to combine 2 sections of code but being a complete VBA novice I'm stuck, where should the second Sub go so that it works,
View 4 Replies
View Related
Nov 20, 2008
I want to display value from cell A11 to J11, and when the button is clicked, I need to transfer the value to underneath the last value on sheet “Results” leaving 1 space. So in my example it would go into row 28. On other occasions there may only be 1 value for example on results, if this was the case the row from Additional parts would have to display in row 7.
Then if I were to add another value in additional parts I would then want this to display in row 30 in my example. So again leave a space and add the line.
View 10 Replies
View Related
Nov 28, 2008
I am trying to add code to a sheet with one code already on it.
Each of these 2 sets of codes work just fine alone, but I do not know how to make them both work on the same sheet.
A working sheet with the code I want to add is attached. The code I would like to add is on the same sheet (pasted on the the page). (See attachment)
View 11 Replies
View Related
Mar 28, 2009
I've added the following code into macro i have assigned to the button on this attached worksheet which deletes any row where the cell in the A column is blank.
View 6 Replies
View Related
Jan 22, 2010
I have the following code that updates columns A,B and C. The columns are hidden and have some 500 plus rows. Cell E2 reads the last entry in column A (a date, such as 1/22/10). I would like to add a line in the code that, if cell E2 equals todays date, will prevent a second update and display a message "Update Complete".
View 12 Replies
View Related
Feb 20, 2010
How would I add a nice progress bar to the following
View 14 Replies
View Related
Jul 11, 2014
I have the following code which works plus a formula in cell range G5:G123....how do i add the the formula to the VBA code
Formula =IF(F5"".F5< today () +3 )
View 9 Replies
View Related
Nov 11, 2009
I use the code below to automatically set a black dot in cell
A11. I would like to add code which would color that dot
the same color as a manually placed checkmark in column C11 which
is symbol é.
In other words, in addition to the code printed below, I would
like to color the dot the same color as the color of the arrow
symbol é in column C11.
Is that possible? Thanks
=IF(AND(B11="ü",D11="X"),CHAR(108)," ")
View 14 Replies
View Related
Jul 16, 2014
I have a code that opens another WB, and gather data from it. most of the lines look like this:
HTML Code:Â
wb.Sheets("Data").Range("K" & Rows.Count).End(xlUp).Offset(1) = wb2.Sheets(1).Range("M49").Value
However i need it to gather the sum: M49+M50, how can i do this without importing both values and then adding them in a 3rd column, like i am currently doing.
View 3 Replies
View Related
Dec 17, 2009
How do I make a Command Button and put event handling code (in the VBE) to handle the click event?
View 2 Replies
View Related
Aug 16, 2002
I have just discovered the exciting world of the additional controls that can be added to userforms. provide me with some sample code to make a progress bar increment and to activate a windows media avi file from a user form. I only need to know the code (I know how to add the controls etc)
View 9 Replies
View Related
Nov 13, 2011
adding an second range (J1089:AI1147) to the follwing code.
Code:
Sub Clear_Range()
Application.EnableEvents = False
With Range("H3:AL1058")
[Code]....
View 2 Replies
View Related
Dec 1, 2011
Code:
Sub Final()
Dim NameCell As Range
For Each NameCell In Sheets("! Names").Range("B1", Sheets("! Names").Cells(Rows.Count, "B").End(xlUp))
[Code]....
I want to pull data from ! Names. This code already Renames a new sheet from the ! Names sheet and also puts there name in cell C2 and phone number into cell C3 of the created sheet. I want to put more data from the ! Names sheet. How would i go about adjusting current code to do that?
View 4 Replies
View Related
Nov 17, 2013
VBA COde for adding CC, BCC to email sent from excel. I already have the below code to send email from worksheet, i need to add a copy email.
Private Declare Function ShellExecute Lib "shell32.dll" _
Alias "ShellExecuteA" (ByVal hwnd As Long, ByVal lpOperation As String, _
ByVal lpFile As String, ByVal lpParameters As String, ByVal lpDirectory As String, _
ByVal nShowCmd As Long) As Long
[Code].....
View 5 Replies
View Related
Apr 19, 2007
I have some code which adds a series of textboxes at runtime depnding on some info on my spreadsheet.
Due to these textboxes being added programmatcally, they curently have no macro's assigned to them.
I was wondering if there was a way of adding code to the textboxes at runtime.
Dim choosebefore As MSForms.Control
Set choosebefore = Me.Frame1.Controls.Add("Forms.Textbox.1")
With choosebefore
.Name = "Before" & i
.Left = 0
.Top = (((i * 18) - 18) - 8) + 6
.Width = 24
.Height = 15.75
.Visible = True
.TextAlign = fmTextAlignRight
.Text = Chr(149)
.SpecialEffect = fmSpecialEffectFlat
.BorderStyle = fmBorderNone
End With
View 9 Replies
View Related
Sep 10, 2004
A procedure residing in the "ThisWorkbook" module has just added a new worksheet into the active workbook. I now want this same procedure to write a set of code into this new sheet's code module.
Solution 1:
Create a worksheet before run-time that is already set up with the code you want behind it. Then, use this worksheet as a sort of "template" when you want to create a new worksheet as opposed to using the worksheet.add method.
Question:
I can use solution 1, but isn't there a way to insert the code on the fly?
View 6 Replies
View Related
Jan 10, 2007
Im trying to autimatically insert a RTD formula in a cell but it is failing trowing the error 1004 : 'runtime 1004: application-defined or object-defined error'
Here is the ....
View 5 Replies
View Related
May 27, 2007
The ultimate goal is to create a Userform at run-time.
The problem is writing event code for that Userform.
The current situation is:
I have a userform. (Created with the VBE, not at run-time.) There is one command button on that userform. The code module for that userform is this
Option Explicit ...
View 9 Replies
View Related
Jan 13, 2012
Is there a way to Print VBA code in color, like how it appears on the screen?
View 1 Replies
View Related
Jan 20, 2012
Is there VBA color to change ".Fill.ForeColor.SchemeColor =" into NO FILL? In other words, keeping the existing Foreground color prior to the macro being activated.
I'm in a chart.
View 1 Replies
View Related
Aug 21, 2007
I have a code that updates data from one file to another.....esentially, i run this code daily and it updates to a compiled daily log of all of the previous days data.
Currently, i am manually coloring the cells to visually assist in grouping what data has been uploaded for each day.
Sub UpdatePOQntyReducDB()
Dim lookupfilename As String
View 9 Replies
View Related
Nov 6, 2007
part of my code looks like this. Instead of it being if c.interior.colorindex i want it to be if top border color = 4.
How do i syntax this?
For Each c In Worksheets("Sheet1").Range("B7:DE7").Cells
If c.Interior.ColorIndex = 4 Then Range("DH7").Value = Range("DH7").Value + c.Value
Also, is there a way to specify Range("DH") and make the row be the current row, not hard coded to 7
View 9 Replies
View Related
Mar 18, 2009
I am using the following code to change colors in set of autoshapes (Thanks Colin_L and Norie) and it works fine for the first autoshape but has it has no effect on the subsequent autoshapes. I plan on using the code for about 200 autoshapes, I thought I could just copy the first code and keep adding it on for each autoshape... I am guessing that the code is stopping after the first set and not continuing?
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$C$46" Then
'Change autoshape color to red depending upon cell value, or blank of no value is entered.
With ActiveSheet.Shapes("Rectangle 1").Fill.ForeColor
If Target.Value = "" Then
.SchemeColor = 1
ElseIf Target.Value >= 422 Then
.SchemeColor = 50
ElseIf Target.Value >= 1 Then
.SchemeColor = 10
Else
'it must be less than 1
End If
End With
End If......
View 9 Replies
View Related
Aug 12, 2009
Is it possible to have a code that says if I have a range of cells....say a1:d1 with d1 having a date in it....have that code say that if that date in d1 is greater than 30 days from today, make that whole range of cells (a1:d1) change color like to red.
View 9 Replies
View Related
Aug 22, 2012
Workbook performs perfectly 95% of the time but every now and again I have this issue where the formular do not calculate (it is set to automatic).
I have a workaround of doing a find and replace across all the worksheets of "=" replaced with "=" and this solves the issue.
The problem I am having is that some of the sheets are protected and some are not. The code I am using for the find and replace is as follows...
VB:
Option Explicit
Sub ChgInfo()
Dim WS As Worksheet
Dim Search As String
Dim Replacement As String
[Code] .....
I need to add to this code the unprotect command and then reprotect only the originally protected sheets?
I am sure these is a better way of doing this but im really short on time. This issue only occurs 5% of the time. the other 95% the formula all calculate fine!
I just need a way of doing the find and replace for = to = across all sheets in the workbook regardless of the sheet protection!!
View 1 Replies
View Related
Apr 9, 2009
The code below resides in my personal.XLS Module. When I step through the code everything works till it reaches the point in red then I get the pop up that says excel needs to close and asks to send or not to send.
I noticed that if I choose recover my work and restart excel and I look at the code in THISWORKBOOK of the recovered workbook that the code I wanted placed there is there.
Can anyone explain why this is happening? I have the macro's security set to low and a check mark in the trust access to vb projects.
Any Idea's how to fix this?
View 6 Replies
View Related
Sep 4, 2009
Code writes decimal numbers next to each other instead of adding. I have the following code on a very simple form:
View 5 Replies
View Related