I currently have a spreadsheet with two sheets. The first is my reporting sheet and the second is called Stores. I currently am using the following formula in the reporting sheet:
View 3 RepliesSee attached file, "Rate Sample Index-Match Formula".
I need a formula to return the value at the cross section of two (2) lookup values that match. This formula will be input into column D under, "RATE" on the 1st tab, "TEST FILE".
In the 1st tab, "TEST FILE" there are a series of columns as follows;
A = Service
B = From
C = To
D = Rate
In the 2nd tab, "RATES" there is a series of rates with drivers From (green) & To (blue)
The formula needs to do the following;
1. Lookup the "From" value in column B on tab, "TEST FILE" and match to column B2:B59 on tab, "RATES" both highlighted in green
2. Then Lookup the "To" value in column C on tab, "TEST FILE" and match to row C1:BH1 on tab, "RATES" both highlighted in blue
3. Then return the value at the cross section of the match "From" (point 1 above) & "To" (point 2 above) in range C2:BH59
For Example;
The rate From SYD To CBR = 0.33. I have highlighted this in yellow on both tabs to show where the formula needs to lookup the data to return the answer.
Additionally, if we were to add service as an additional lookup match how would this work?
I have a formula that currently works on it's own as a array formula, however I need to integrate an IF statement into it. I tried this, and the result shows a blank cell (it should be blank only if false), but the data reflects a true statement.
{=IF(Client!$D$9="Scale 10",INDEX('Base Model'!$K$3:$K$237,MATCH(1,($B3='Base Model'!$A$3:$A$237)*($E3='Base Model'!$E$3:$E$237)*($D3='Base Model'!$D$3:$D$237)*($C3='Base Model'!$C$3:$C$237),0)),"")}
Client!$D$9 is a formula, and currently the result is Scale 10.
My attempt is that if the statement is true, the INDEX MATCH should be calculated and populate the result, and if the statement is false, then the cell should display a blank result.
I have this table
.......A.....B.....C....D
1.....I......a.....d.....g
2.....II.....b.....e.....h
3.....III....c.....f......i
As you can see, the number I has a,d,and g, II has b,e,and h, and III has c, f, and i
I want to make formula that if I make the input g it would return I, f would return III, and c would return III, and so on
I want to make four formulas by using VLOOKUP, INDEX, MATCH, INDEX&MATCH separately.
Basically, I am trying to write a program that will index match through a range and if it doesn't find the value that it is matching to, it will add the value to the bottom of the range it is indexing against. In other words:
My C column has a list of CUSIPS. In column J, I would like for the User to be able to add a list of cusips and then have the ones that don't already exist in the list of CUSIPS in column C be added at the bottom of the range. I have written a macro now that uses the index match, but for some reason it adds all of the cusips that exist in J range to column C, not just the ones that are missing. I can provide a template if necessary.
Sub Filler()
Dim Row As Variant
Dim NumberOfRows As Long
Row = 0
[Code]...
I am trying to match data from 2 independent sets, formatted slightly differently so not sure which function would work best for me. From the attached file, I am trying to match the date and time stamp (in cell A1) with that from the other data (in this example in cell E1) and return the data (from cell F1) to cell C1. So basically any date and time stamp before 04/03/09 04:00 will return a value of 44 (this value should appear, therefore in cells C1 - C30)
View 2 Replies View RelatedWe know how INDEX/MATCH works, and it's very nice. I attached a COUNTIF to it to count how many times the index finds itself on another table; if it doesn't find itself, then it goes blank. However, this time I need to count how many times it finds a certain string condition in the other table.
sampleexcelhelp.xlsx
The columns that need to be filled are shaded in dark pink.
I have two sheets of data , sheet A and Sheet B.
Sheet B contains a column called "Name" and for each name, and for each name there are corresponding numbers. In sheet A, I have a "list of interest" in column A. What i want to do look through the data in sheetB to find a match from the list of interest and return the corresponding letters, located in column A.
I have filled out the first two rows of results that should be returned as an example.
One idea i had was to put a vlookup formula in each column result 1 to result 6 so i can catch all 6 "Serves" columns from column B, but there may be duplicates in the serve columns and vlookup only reports the first match.
Basically where the columns say 2011 or 2012 AND 1, 2, 3. I want to be able to have it index the number below based on the GL number on the left and both the year and period on the top. I think that you can do with using the sumproduct function with the binary, but the computer is a little dated and it takes a while to run those calculations.
2011
2011
2011
2012
2012
2012
[code].....
INDEX/MATCH multiple ocurence match values needed
View 9 Replies View RelatedIs it possible to return a value or a sum of values using segmented lookup criteria. The Sample 1 spreadsheet (attached) explains it better.
View 10 Replies View RelatedI couldn't resolve the formula of Index-Match for getting the values that matches the following criteria
1) Match the "Category" of Table 1 to Table 2
2) Match the "value" of Table 1 to Table 2, if value is not present in Table 2 take the upper closest value.
Once the above conditions are met, Take the Result from Table 2
Table 1 is for Input and Table 2 is for Database.
Please note that Data in Table 2 should not be sorted in any way. I tried to use the -1 option of the Match function for upper closest value but it didn't work out.
Have a look at the file attached : IndexMatchUpperClosestValue_AlongwithExactMatch.xlsx
I am looking to sum the values found at the intersection of multiple values based upon a vertical and horizontal lookup. The formula I am trying is as follows (which results in #Value):
{=IF(ISBLANK(G$9),"",SUM(IF(INDEX('Journal'!$A$20:$Z$1020,MATCH("Prior",'Journal'!$F$20:$F$1020,0),MATCH(G$9,'Journal'!$H$19:$Z$19,0)),"")))}
Current I am using two spreadsheets for similar press and am combining the two. What I need help with this time is currently in cell c9 the formula is =ROUNDDOWN(17.7/C7,0) or =ROUNDDOWN(39.3/C7,0) depending on which press I am using. The presses are shown in cells d34 - q34. Indigo =17.7 gilboa = 39.3. I have added these numbers to a table in the scales tab a24:e26. Is there a way to write a formula in cell c9 on the input tab to combine the 2 above formulas and insert the correct 17.7 or 39.3 when required?
View 14 Replies View RelatedGuys im stuck on the fact of how to pull the correct information through for a named person.as from the example if i place say steve in the named box i would like all of steves scores to appear in the designated boxes.and so on.
View 11 Replies View RelatedNeed to place an Index(Match) formula in Sheet 2 B2 (as for example). The lookup values in Sheet 2 to be matched with Sheet 1 will be A2, B1 and J1.
In Sheet 1 (Edit) I'm only interest in the subtotal and Sheet 2 J1 represents the subtotal for the week that ends with J1 date.
The Index should be the whole Sheet 1 (if possible) for further expansion (and I do have way more than what is presented below).
Edit
HTML removed by RAM and replaced with a new HTML further down.
I have attached a formula I have used to extract a value from another sheet (I have also attached where the formula is mean't to extract the value from) . My problem is that this formula is not returning what it should?
The value that should be returned is "416"
Why am I getting the "#N/A"s in the enclosed example file.
View 3 Replies View RelatedHow can I modify this formula so it retrieves the 1st matching value (like always), but then the 2nd match, 3rd, etc.:
{=INDEX($A$2:$D$6,MATCH(F2:$F$6&G2:$G$6&H2:$H$6,$A$2:$A$6&$B$2:$B$6&$C$2:$C$6,0),4)} sheet attached: Example.xlsx
I am not sure where the error is in the formula. Also I would like to add one more condition to it.
Another problem- I created Drop Down using Data Validation. Now I need to make the Drop DOWN ICon visible. It becomes visible only when I click on the cell.
I am trying to tidy up a large workbook, and need some help with use of range names in the Match function.
I have the formula working on the attached sample, but wonder whether it's possible to get the Match function Lookup Array to pick itself from the range name.
My spreadsheet has duplicate lookups, which I need to sum. The INDEX MATCH formula will only bring back the first amount in the list, however I need to return the sum of all the matches. I'm assuming I can include a SUMIF, however not sure how to incorporate.
Current Formula Below:
=INDEX('3.5 IFRS Instr Curr YTD in CHF'!$M$27:$CC$400,MATCH('Detail Reconciliation'!$C12,'3.5 IFRS Instr Curr YTD in CHF'!$A$27:$A$400,0),MATCH('Detail Reconciliation'!M12,'3.5 IFRS Instr Curr YTD in CHF'!$M$26:$CC$26,0))
In column B I enter a date when a student attended tutoring.
In column C I enter the name of a student attending the tutoring.
In cell D4, I will be entering a student name
In cells D5:D55 I'd like a formula that transposes the dates (if any) that a student attended tutoring. So if a student has their name appear beside the dates ... 14-Feb, 22-Mar, 24-Mar .... then I'd like those three dates to appear in cells D%, D6 and D7.
How to formulate this ... I'm guessing it's going to involve an index-match formula.
How this could be addressed.
Col. A = Article, Col.B = Part Number, Col.C = Location
I am currently using an index & match formula to create a search function. For example if I want to know what article number PLU547 has then I use
=INDEX(A3:A12,MATCH("*"&A19&"*",B3:B12,0))
This use of wildcard is fine until it comes to part number searches such as PLU54 (which is not in the list). In this instance the formula returns the first article number from the list that starts with PLU54. However, part number PLU54 is a code in its own right and I fear that using the wildcard approach needs a modification to limit the returns.
ARTICLE:
PART NUMBER
Location:
XCA123
PLU546
A1
[Code] ..........
I have a formula
=INDEX(Wholesales!A:C,MATCH(Data!A2,Wholesales!A:A,),MATCH(C2,Wholesales!B:B,))
Now this returns the correct value for the first row only, then after that I get the famous #REF! error. Any ideas why it only works for the first row?
I would like to write a formula that I believe will be a SUMPRODUCT formula with a very complicated string of MATCH and INDEX (I think). I hope this can be written in one formula - but if I need a couple to get there, that would be okay too. I am modifying an existing workbook that currently does the calculation, but it need a separate sheet for each payment - up to 12, but it can't be easily modified for more, and I need to do about 120. I can do limited SUMPRODUCT formulas and can do some limited MATCH formulas, but I can't begin to figure out how I would string this formula together. Hopefully what I need to do is clear with the excel shot below. If not, I could post a sheet that does the calculation for one payment. Thank you for working any magic you can on this.
I will try to explain how this formula needs to work. The formula needs to calculate interest on a payment, from one date to another date using a set of fixed interest rates that are established for each quarter. So this is what the formula needs to do. The workbook has a table (see below) that identifies the quarter - dates from and to, the number of days in the quarter (may be needed in the formula, but maybe the formula would calcualte?) The first and last quarter would most likely not be applied for the full number of days, since the payment would be after the start of a quarter, and the end date may not be at the end of the quarter. It needs to determine if the payment falls in a quarter, how many days then are in that quarter, and apply the base dollar amount for the number of days at the daily interest rate. So it would need to look at all dates and do this calculation and add each of the quarters together until it gets to the "Calculate to date" (cell J5). In the sheet below, I would put the formulas for each paymant in cells K8 to K14.
******** ******************** ************************************************************************>Microsoft Excel - Test.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutD5F5D6F6D7F7D8F8D10F10D11F11D12F12D13F13D15F15D16F16D17F17D18F18D20F20D21F21D22F22D23F23D25F25D26F26D27F27D28F28=BCDEFGHIJK4QUARTER DAYS/QTRRATESDAILY RATE 51/1/20013/31/2001909.0%0.00024658 Calculate interest to: 3/31/2009 64/1/20016/30/2001918.0%0.00021918 PAYMENTDATES INTEREST BASE INTEREST77/1/20019/30/2001927.0%0.00019178 810/1/200112/31/2001927.0%0.00019178 112/2/2001 $ 2,424 9 21/11/2002 2,486 101/1/20023/31/2002906.0%0.00016438 32/17/2002 21,011 114/1/20026/30/2002916.0%0.00016438 43/19/2002 3,827 127/1/20029/30/2002926.0%0.00016438 54/22/2002 54,971 1310/1/200212/31/2002926.0%0.00016438 65/25/2002 1,255 14 76/24/2002 4,883 151/1/20033/31/2003905.0%0.00013699 164/1/20036/30/2003915.0%0.00013699 177/1/20039/30/2003925.0%0.00013699 1810/1/200312/31/2003924.0%0.00010959 19 201/1/20043/31/2004914.0%0.00010929 214/1/20046/30/2004915.0%0.00013661 227/1/20049/30/2004924.0%0.00010929 2310/1/200412/31/2004925.0%0.00013661 24 251/1/20053/31/2005905.0%0.00013699 264/1/20056/30/2005916.0%0.00016438 277/1/20059/30/2005926.0%0.00016438 2810/1/200512/31/2005927.0%0.00019178 Sheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I have the followings in my spreadsheet.
a) Column A: 900 serial nos of Work Orders. Each is unique.
b) Column B: Parties responsible for each Work Order no. Certain parties will have more than 1 serial no in Column A.
Note: Column A & B are the main reference.
c) Column C, D & E: List of parties from three different locations performing works base on serial nos in Column A.
I would like a list of serial nos performed by parties in Column C, D & E base on Column A. I can't use the autofilter or sort function on each individual parties as this is very time consuming and moreover the info keeps changing ever 2-3 days. What I require is a simple summary list where I just need to paste the info from Column C, D & E into a special table and it would list down the serial nos from Column A. I had tried the INDEX & MATCH functions but it won't work as I have some parties performing more than 1 serial number. Would it be possible to create a table to perform the said task. These data entry and retrieval has taken minimum 4 hours of my time everyday and it takes longer when certain lists are revised.
I am currently using the following formula and it gives the result P-10, P-10, P-11 below dates that are manually entered. I can not figure out why the date 10/31/09 returns a P-11 value when it matches a P-10 value? All other dates work expcept for the 12 period ending dates. Any help would be greatly appreciated.
=INDEX($B$5:$B$16,MATCH(A$1,$A$5:$A$16,1)+1,0)
10/17/09 10/24/09 10/31/09
P-10 P-10 P-11
01/31/09 P-01
02/28/09 P-02
04/04/09 P-03
05/02/09 P-04
05/30/09 P-05
07/04/09 P-06
08/01/09 P-07
08/29/09 P-08
10/03/09 P-09
10/31/09 P-10
11/28/09 P-11
01/02/10 P-12
I would like to modify my INDEX-MATCH formula to "look for" my second creteria in a range of cells (ie. the Type 1 to Type 3 range shown below).
I am stuck with the Type data spread across a range of columns.
InputSite: Island(Criteria 1)Type: Direct(Criteria 2)Cost: $ 10 (Desired Result)Data SiteType1Type2Type3CostIslandDirect $10 MainIndirect $20 SecondaryOther $30
Imagine 5 periods of sales, growing by $550 per year, from $250 to $2,250. There is a columnar table with sales in increments of $500 to $2,000 paired with margin percentages.
Using INDEX(MarginColumn,MATCH(Sales,SalesColumn,1)) successfully retrieves the correct margin % for each period where Sales is that year's sales.
So, I tried to construct an array formula in the following way:
{=SalesRow*INDEX(MarginColumn,MATCH(Sales,SalesColumn,1))}
Sales is not changing, so that only the 1st year's margin percentage is being applied to each year's sales. I confirmed this by extending the array to a multi-cell layout.
How can I correct the formula so that the margin percentage is looked up as if it were using each year's sales independently? I know I can just SUM the array once this works, but this is my current road block.
P.S. If you see this answer immediately, how might I multiply the percentages by the sales that increase by $500 and sum the whole expression into one cell?