VLOOKUP / INDEX And MATCH To Return All Values That Match
Feb 4, 2014
I have two sheets of data , sheet A and Sheet B.
Sheet B contains a column called "Name" and for each name, and for each name there are corresponding numbers. In sheet A, I have a "list of interest" in column A. What i want to do look through the data in sheetB to find a match from the list of interest and return the corresponding letters, located in column A.
I have filled out the first two rows of results that should be returned as an example.
One idea i had was to put a vlookup formula in each column result 1 to result 6 so i can catch all 6 "Serves" columns from column B, but there may be duplicates in the serve columns and vlookup only reports the first match.
I am trying to match data from 2 independent sets, formatted slightly differently so not sure which function would work best for me. From the attached file, I am trying to match the date and time stamp (in cell A1) with that from the other data (in this example in cell E1) and return the data (from cell F1) to cell C1. So basically any date and time stamp before 04/03/09 04:00 will return a value of 44 (this value should appear, therefore in cells C1 - C30)
See attached file, "Rate Sample Index-Match Formula".
I need a formula to return the value at the cross section of two (2) lookup values that match. This formula will be input into column D under, "RATE" on the 1st tab, "TEST FILE".
In the 1st tab, "TEST FILE" there are a series of columns as follows;
A = Service B = From C = To D = Rate
In the 2nd tab, "RATES" there is a series of rates with drivers From (green) & To (blue)
The formula needs to do the following;
1. Lookup the "From" value in column B on tab, "TEST FILE" and match to column B2:B59 on tab, "RATES" both highlighted in green 2. Then Lookup the "To" value in column C on tab, "TEST FILE" and match to row C1:BH1 on tab, "RATES" both highlighted in blue 3. Then return the value at the cross section of the match "From" (point 1 above) & "To" (point 2 above) in range C2:BH59
For Example;
The rate From SYD To CBR = 0.33. I have highlighted this in yellow on both tabs to show where the formula needs to lookup the data to return the answer.
Additionally, if we were to add service as an additional lookup match how would this work?
making a forumla that will return the second, third ewtc values using VLOOKUP or INDEX/MATCH. Attached is a dummy file almost identical to the one I'm working in. In the first sheet there's a dependent drop-down list with the values Sub1, Sub2 and Sub3. This corresponds with data in sheet two listed next to these names. The problem is when I try to populate the table below using VLOOKUP etc it just repeats the first row over and over rather than defaulting to the second and third row results
I have a list of data that I want to average the number in column B when there is a match in column A
COLUMN A | COLUMN B alpha | 100 beta | 200 gamma | 300 alpha | 400 beta | 500
What I'm looking to do is return the MEAN of values in column B where column A = alpha. Though, I would settle for returning a list of the values that match the criteria. Index/Match combinations don't seem to be helping me because they only return the first match, I'd like to return all matches.
Basically where the columns say 2011 or 2012 AND 1, 2, 3. I want to be able to have it index the number below based on the GL number on the left and both the year and period on the top. I think that you can do with using the sumproduct function with the binary, but the computer is a little dated and it takes a while to run those calculations.
I have a worksheet that has numerical data in A1:A22. In E1:E61 I have set values in numerical order and in F1:F61 I have a letter or letters that correspond to E1:61.
I am trying to write a formula in B1 that will look at the value in A1 and then match it up in E1:E61 and then return the corresponding letter in F1:F61.
I have a tab that has Employee Name in one column and the benefit they chose in another column. The employee name is repeated a number of times since they have chosen more than one benefit.
I am trying to create a new tab where the employee name in is the first column (only once) and each benefit is listed in separate columns along the top. I want to put an "x" in the column for the benefit the employee has chosen.
Is there a way to say "look for this employee, see if this benefit is what they chose, and if it is, put an "x", if not, leave blank"?
I have two active worksheets. The first one is called 'Chart' and the second is 'Values'. I have three columns of data. I would like to look in the first two, and return a value in the third. =INDEX(Values!$C$1:$C$299,MATCH(Values!$D$1:$D$299,LEFT(Chart!A1:A16091,6)&" "&LEFT(Chart!C1:C16091,2)),0) .........
If I have a column of data with a bunch of values (which can't be sorted & which is constantly changing so cant be broken into another column and then sorted) what formula do I need to output the second occurrence of a value in that column?
Attached example file has data with which I need to do the following;
On the tab "part list" I put in the part number in column F. Column C should then be populated automatically by looking up column F in the tab "Lookup" and showing the value found in column B of that tab.
The difficulty with this is, is that when the part number in column F starts with "DN", the lookup value should end with "FD/A" and when the part number in column F starts with "Z", the lookup value should end with "TY/A".
This last part I can't get it to work. I've tried vlookup with a index/match function inside, but it won't work somehow...
******** ******************** ************************************************************************>Microsoft Excel - M_NECPE.Man Accts.xls___Running: 12.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutR1=RSTU1New CodesOld Codes 2 310100199999V 4101002NEW 51010032270A 61010061100 7101009NEW 81010101104 91010111101P 101010121101S 111010141102 121010151102L 131010181130 141010222203 151010231106I Sheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
The code in column E & G is as follows:
******** ******************** ************************************************************************>Microsoft Excel - M_NECPE.Man Accts.xls___Running: 12.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutG62H62G63H63G64H64G65H65G66H66G67H67G68H68G69H69G70H70G71H71G72H72G73H73G74H74=EFGH621106B| 631100|101006 641101D| 651101K| 661101P|101011 671101S|101012 681102|101014 691105R| 701103|101037 711104|101010 721105| 731106|101031 741106I|101023 Sheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I have used a lookup table to calculate the value in column H as follows, but cannot get it to work
I have a table full of names and cars sold. The table tracks the person's progress. It is like a diary. It's a simplied version of the DB I am currently working with.
Is it possible to do the following things? I have basically 2 types of questions.
1)When was the last red car sold?
2)When was a car sold irrespective of color?
The answer to each question will be put in separate columns. I have only included January but I will do this for the entire year of 2010 and also I will do this for all of the names in my database. I think there are about 300.
When was the last time ANDY sold a RED car? The answer should be 1/12/2010 The answer will be put in ROW A COLUMN I
When was the last time ANDY sold a car irrespective of color? The answer should be 1/12/2010 The answer will be put in ROW A COLUMN J
When was the last time BILL sold a RED car? The answer should be 1/10/2010. The answer will be put in ROW B COLUMN I
When was the last time BILL sold a car irrespective of color The answer should be 1/11/2010 The answer will be put in ROW B COLUMN J
I have the following arrangement PVCu_Woodgrain_DoorF190210300#REF!
PVCu _woodgrain_Door is a drop down list that selects from a number of named ranges.
The Cell that shows (F1) and is called DOORSTYLE with 6 choices F1, F2 ... F6 (I cannot change these to numeric only values)
300 is the 2 previous cells added together. It is called DRSZ1 and will match a numeric value in the named array.
My formula cell with the issue has this formula; =INDEX(INDIRECT(ARRAYDR1),MATCH(DOORSTYLE,INDEX(INDIRECT(ARRAYDR1),0,1)),MATCH(DRSZ1,INDEX(INDIRECT(ARRAYDR1),1,0)))
I know MATCH(DOORSTYLE,INDEX etc. should be a VLOOKUP to find F1 in the named array, but I just cannot get it right.
I am very competent using the index match formula and have incorporated this into many spreadsheets to auto-fill for avoiding input errors. The objective I am attempting now is to retrieve from a list of 2800 entries the smallest return on an index match formula.
From the data below if my Index Match formula uses C1 to index and match my return is always a7 (-12.7) the first in the list, where my desire is a return of a19 (-14.11). To complex this problem I often have duplicate amounts that need to be listed when they fall into my parameters. I have figured that the Small function allows me to assign first smallest, second smallest, and so forth.
I prefer not to use vlookup for simplicity and error avoidance issues.
how to go about this, as I always get confused with Index and Match. In my example, in col A I have the Beginning of a period, Column B is the End of the Period, and the amount to be matched is in Column D. Range A1 to E4 is the source data. Below that, starting from A9 to A37 are dates. I would like to match the corresponding value in range D2:D3 if the date in range in A9 : A37 falls between the period stated in A2:B3. I've listed how the values should appear in C9:C37.
What I want to do is, given the data in col. a, I want to supply a number(range) of strings which can be found in column a, whenever a string is found, which exists in given range, I want to write the string from the Key(col. c) in col b instead of the value from the string that matches a value.
See below for example of what I got working but not exactly what I was looking for
Col. A- Data Orangegreen Blackwhite Blueyellow
Col. B - Result
Col. C - Keys Orange White Yellow
I used
Code: =INDEX(A1:A3,MATCH("*"&C1&"*",A1:A3,0))
This does produce a result, but not entirely what I am after.
This requires only one string to search for, and will in cell B1 result in a value of 'Orangegreen' as I can only supply one valeu to the function. What I want to do is supply the function with a range of values, and have those values outputtet in colb instead af the value of cells where the result is found.
I tried modifying the function to include a range, but that does not produce a valid result.
In column B I enter a date when a student attended tutoring. In column C I enter the name of a student attending the tutoring.
In cell D4, I will be entering a student name
In cells D5:D55 I'd like a formula that transposes the dates (if any) that a student attended tutoring. So if a student has their name appear beside the dates ... 14-Feb, 22-Mar, 24-Mar .... then I'd like those three dates to appear in cells D%, D6 and D7.
How to formulate this ... I'm guessing it's going to involve an index-match formula.
Where my variables would be based on whether a person is under EnglishSS1 and getting a score of <=10, the resulting rating would be 3. I know this is doable by doing a vlookup with a range lookup value of false. However I have roughly 70 column headers and it will be a bit taxing to combine an If and Vlookup statement to address it.
I have attached a sample sheet for reference : Book1.xlsx‎
What I want to do is the following, I have two sheets, one where the data needs to be filled and the second where the date needs to be looked up. In Sheet1 I need to find a date for each of the NR2 and NR1 combination. But in the second sheet there are multiple NR1 occurences and also single occurences. So if there is only one, I need that date, if there are several I need the average of all the occurences for NR1, not taking into account the N/A ones.
(some examples from the file) NR2 NR DATE 100707987121951 100702347121960 100707750121960 100707721121960 100702422121960
[code]....
So for example, NR1 121965 has two dates, 03/09/2002 and 27/01/2004, so here it should calculate the average of these two and put that average in the first sheet.
I was thinking of something like IF(MATCH(?) gives one result,put that with vlookup, else AVERAGE of all MATCH that are not N/A)
