I have a spreadsheet with some cells setup with a drop-down list containing Y, N or N/A
This is being used on a TabletPC but if I make a mistake or need to change back to a blank field I have to invoke the soft keyboard, activate the cell and hit backspace then close the soft keyboard - quite a long-winded procedure just to change an incorrect choice!
What I would like to do is add a blank to the list so if I have to revert back to a blank I can just use the stylus to choose a blank from the chooser list.
How do I add the option of inputting a blank from the Data Validation List bearing in mind I am using the Data Validation Source box for entering my choices directly and not specifying a range of cells?
I have tried adding "" and even a space to no avail.
I have a list in one worksheet which comes from "=SALESMEN!$D:$D" but the list is extremely long with blank values. How can I make the list only show values from column D which are non-blank?
Currently the list goes up to 30, however I want to use all of Column D from the SALESMEN worksheet, that way if I add to it, the names will automatically be added to the list in the other sheet.
i have two sheets in workbook named as shtbiz,shtbiz1.
so column A of my shtbiz1 sheet i have 100 datas.the by using following code i can fill the datas of shtbiz1 in column A of shtbiz.
Dim strValItems strValItems = "" Set rngValList = ShtBiz1.Range("A6", Range("A10000").End(xlUp)) With ShtBiz.Range("A6:A10000") . Validation.Delete For Each rngValCell In rngValList If Len(strValItems) > 0 Then strValItems = strValItems & "," strValItems = strValItems & rngValCell.Value
Next .Validation.Add xlValidateList, , , strValItems End With
so my problem is i need to add blank value in the top of the list .ie first value should be blank then other values which read from shtbiz1 has to be followed.
I have 2 columns First Name & Surname. What I want to do is create a data validation list on the surname which results in the 2nd data validation list only showing the first names which link to one of the surnames.
i.e. If I selected Smith in the 1st validation list then I would only like to see 'Paul' as an option in the 2nd list
I have multiple sheets (Sheets "A", "B", "C", etc) with the same structure and formatting. For these sheets ("A", "B", "C", etc.), I want to create dropdown lists in column F (cells F2:F100) based on values from a different worksheet (Sheet "DropDown", Cells "B2:B130").
I saw a previous post [URL]... which had a single sheet example. I am trying to come up with vba code for multiple sheets and so far it's not working.
VB:
Dim wkst As Worksheet For Each wkst In ThisWorkbook.Sheets ThisWorkbook.Names.Add Name:="listdata", RefersTo:= _ "=dropdown!$B$2:$B$130" With wkst.Range("F2:F100").Validation .Add Type:=xlValidateList, AlertStyle:=xlValidAlertStop, Operator:= _ xlBetween, Formula1:="=listdata" End With Next End Sub
I'm trying to use data validation to restrict the user to only selecting values in a list which I create. Right now, the list is a named range. I'd like to get rid of the range and just use a named list. I create a name using the following as my list.
Insert > Name > Create Name: Fruit
Refers to: banana,apple,orange
When I try to use the name Fruit in my data validation, I get the message "The List Source must be a delimited list, or a reference to single row or column." I thought my name "fruit" was a delimited list.
I'm looking for a way to get a unique list from a column to a data validation drop down list. Any fancy formula or vba script to create a UDF which. Does this?
I have a List of Different Fruits in Cells A1 to A5
Apple Banana Orange Strawberry Cherry
And I use data validation list in 5 different cells from Cells C1 to C5 then in every cell the list will show all the fruits,
But I want that if I select Any Fruit in cell C1 that should not be included in the remaining 4 cells, and the fruits selected in Cells C1 and Cell C2 should not be included in the remaining 3 cells and so on....
I Used the formula
=IF(C1=A1,OFFSET(A2,,,COUNTA($A$2:$A$5),1),0)
But this works fine if I select Apple in the Cell C1, then the List of C2 Shows all Fruits other than Apple, But if in Cell C1 I select any fruit other than Apple it does not work... (Using Excel2007 & Win XP)
is there a way to force so that a cell value can be only of what a validation droplist offers, hence users can not enter their own values and have to use the droplist for cell content selection.
I have a tracking sheet... in that I got in column C say "priority" there I have a drop down list date say P1, P2, P3
Now I need to restrict that if a user enters a data in the C2 and trying to enter a data in D2 leaving the drop down list data blank in C2. A error message saying "pls select priority forst" etc...
I got the following solution from moderator:
You can apply the Custom Data Validation formula =LEN(C2)>0 to D2, making sure that Ignore Blank is unchecked.
It works but, when I enter something in that cell it gives the error message and when I click OK or Cancel it just ignore the conditions and leave the data what ever I entered and moves further.
I am using Data Validation and I don't want the user to go past a cell without putting in an entry. When I leave the box (ignore blank) unchecked it doesn't do anything after I have protected the document.
1.I've watched tutorials on youtube but the data entry was on the next row. I want that my data entry to input data on the next blank column. I'm having problem with the code to use
2. Any way that the P.O. number will arrange in ascending order.
Example : The last P.O. number was 005 then i've realize that I've missed P.O. number 003. And I want to input P.O. number 003 and it will be arrange.
I am currently working in an excel file for which i want to create a macro. I am using colomn F as the base from which it should be determined whether a row should be copied. In colomn F the user can select three options through data validation. If 'completed' is selected, the whole row should be copied to the second sheet, and each copied row should be pasted to the next empty row. The data on the source sheet starts at row 11 and should be copied to sheet 2, starting from row 11 as well.
I am using Data Validation on some fields to create a drop down list from a named range! These fields however allow you to enter values that are not in the list.
Is there a way to make the cell have to be an entry from the data validation list?
I have 2 sheets: "MasterInventory" and "InventoryFeed". "MasterInventory", is my full list of all the item I sell on Amazon.com. "InventoryFeed" is populated when I download an update from amazon and paste the data into it. Each list has about 30 columns and each list uses identical headings in the top row. The third column in each sheet is for the product's SKU.
What I'd like to do is loop through each row in the "inventoryFeed" sheet, assign it's sku (the value in column 3) to a variable, and then copy the entire Row. Then I'd like to switch to the "MasterInventory" sheet, and look in column C for the identical SKU. If it is found, I'd like to overwrite the entire line by pasting in the data that was copied earlier. If the SKU is not discovered, I'd like to paste the information into the next blank row in the "masterInventory" sheet.
After the whole thing is looped through, I'd like to sort the MasterInventory Sheet from A to Z by the product's SKU.
I have a table of data 300 rows long with protected formulas in adjacent columns and at the bottom of the column. Some of the data cells are blank but the non-blank cells are contiguous and start at the top of the range (see Before Example).
a macro that would allow users to insert a blank cell at any point in the data table without losing any of the other data or disrupting the formulas. In other words I want to move all the data from that point to the bottom of the range down by 1 row. A before and after example for a smaller 10 row data set is shown below.
Before
AB1data aformula 12data bformula 23data cformula 34data dformula 45data eformula 56data fformula 67Â formula 78Â formula 89Â formula 910Â formula 1011formula Aformula B
After
AB14data aformula 115data bformula 216data cformula 317data dformula 418data eformula 519Â formula 620data fformula 721Â formula 822Â formula 923Â formula 1024formula Aformula B
I'd like to create a drop down list in data validation from a column of data that contains numerous duplicates.
For example, let's say column A contained hundreds of transactions with either North, South, East and West, how could I create a drop down list in another cell that only had four selection options?
The idea is to create a liquor order sheet which takes items and prices from a liquor inventory workbook, which is part of the same file. i'm sure that you can do it all fancy with a macro, but unfortunately i'm not super experienced with excel. so i helped myself with what i know a bit -> drop down lists. I created an extra sheet which has 4 ranges on there... the liquor type (liquor, beer, wine), and the 3 sub classes for each type (red/white/blush/sparkling for wine, draft/import for beer and so on and so forth). On the inventory i named the range of all white wines "white", of all red wines "red" ..
On my order sheet i created a drop down list for type and created 2 more via "indirect" .. so when you select "wine" in the first one, the 2nd one will ask you for white/red/blush/sparkling and the last drop down then for the exact item according to the range on the inventory.
Hope what i did so far is understandable ^.^
Now my problem is that i want the unit cost to be copied when an item is selected. So you select "beer" in A1, "import" in A2, "corona" in A3... and the price for corona (which is written in a cell on the inventory sheet) should show up in A4.
I attached a screen of the inventory sheet so that you can see how it is structured.
Hello, could some one please help me with the following:
I have created a drop-down list for the range : C3:C65000 using Excel 2003 and Windows XP Pro. I did this using Excel's Data Validation Tool. The settings I used are as follows:
Allow: List Source: =GROUPS Check Box Ignore Blank is Ticked Check Box In-cell dropdown is Ticked
GROUPS = GROUPS!$A$2:$A$29
Now all this works well, such that when I click in the cell range : C3:C65000, then a dropdown list appears - showing a list of all my groups.
However, when I click on any of the dropdown lists in this range, the width of the dropdown list is only as wide as the column. Column C has a width of 20.
What I need please is for the dropdown list to be as wide as the list of information showing in the dropdown list. If some one could please explain on how I can achieve this - that would be great.
I have a workbook that uses data validation from a list. The same list is used in several of the individual sheets. Can one use just one list for different sheets, as I'm having to create separate list for each sheet, which when an overall change needs to be made it is easy to miss one.
I want to load the actual data exist in the rows by selection value from the data validation list.
E.g I have two worksheet in one excel file. One has a data activities of persons with their name like two columns i have in which one exist the name of person and second exist the activities which they perform.
On the second sheet, i made a data validation list of all the person names
Now my requirement is, when i select a person name from the list, load all the data from the 1st sheet to second sheet. Is this possible without VB code, because I want to share it on the Google sheet with my boss, where VB sheet is not supposed to work.
I have a cell "project titles" entered in sheet1 that populates into sheet 2 - column "Project titles".
I need to keep the values in this column unique. So can I create a data validation such a way that I won't be able to enter values into this cell that are already on the list. This way I can avoid entering duplicates.
I try to find a solution (with or without macro) to assign different ranges named "Failure_C..." in a data validation source depending on the value of another data validation list (32 values called)
I started in the Data Validation List Source to fill in IF function but 32 inputs are not accepted and too much caracters in the source.
2. sheet contains the availability of teachers. so all columns start with a date and the rows contain the name.
A row therefore looks like this.
7/1 Harley
Lidia Livia Thais Salete Carla
My issue: The 1.sheet has a column Teacher, now in this column I want to have a drop down list. (E2, E3, E4, E5 ... etc..) This list is depended on the date which is in column B.
Essentially I want the list to look up date in its row go to the second sheet and give me all the possible names in it. That is all.
I am trying to create a data validation list with a bar graph. I have tried using the IF and Vlookup formula, but its not working for me. I would like to be able to select classroom # from the drop down menu and the bar graph update selected with student’s name and selected data information. I have attached the file.
