I have forumlas that will look at this cell and take action of the month in a different cell is either 1 month greater (Frontmonth+1) or less (Frontmonth-1) than "Frontmonth". As we approach December I'm realizing that logic will breadown since the FrontMonth+1 would be 13, not 1 (January)
Is there a way to get excel to add 1 month to just the month number so that if Frontmonth = 12, Frontmonth+1 would return 1, not 13?
I have a spreadsheet that is now a yeare old with 5000 rows and is now going into the 2nd year
Column A is for date input and the same date can be repeated several tumes :-
1 Jan 09
1 Jan 09
1 Jan 09
1 Jan 09
2 Jan 09
2 Jan 09
3 Jan 09
3 Jan 09
3 Jan 09
Sometimes there are all 30 /31 days but normally not .
I need to find the last ocurance of the last date used for each month and then use the cell number to calculate the column totals for that month.
I m trying to write a formula for my financial model. If anyone can take a stab at a solution. I'm trying to write a formula that will equally distribute revenue either over the next 1 month, 2 month or 3 month period depending on size of the deal.
Details:
Sales will fit in 1 of 3 categories. Less than 25k; between 25k & 100k; greater than 100k.
- if under $25K, recognize in next month (month N+ 1)
- $25K-100K, recognize in two equal parts in months N + 1 and N + 2
- over $100K, recognize in three equal parts over 3 months
N + 1, N + 2, N + 3 ...
I am trying to add a dynamic date rang to the heading of a table. I can find the earliest and latest dates, and want to concatenate them in the heading...
January 1 2012 to January 31 2012
The day and year (and the other bits) are easy, but is there an easy way to convert 1 to January, without going through a vlookup.
I have the following data:
column a: column B:
1
7
9
25
I need a formula to make column B equal to the current month adding the day in column A. so that column B equal the following:
column a: column B:
1 09/1/2009
7 09/7/2009
9 09/9/2009
25 09/25/2009
I'm making a basic spreadsheet that has to calculate monthly due dates for 'reviews' based on an initial start date.
im using:
=DATE(YEAR(A1),MONTH(A1)+1,DAY(A1))
.... i know thats probably dead simple to you guys!
which works fine.. except when it comes to times when the start date is for example 31 january, so the sequence goes:
31 jan....... 03 March.... 31 march
and my problem is i need 1 review in each calendar month, so i need to tell that 03 March to be 28 Feb instead.
Need to create year to date sales comparing 4 years month by month. Stacked chart (Excel 2010) works OK for the first three months but adding the fourth month changes the chart to 4 series with a monthly axis. To put it another way I need a vertical axis of years and a horizontal axis of $$$ with each months sales of each year stacked on its year.
View 10 Replies View RelatedI have created a time sheet in excel (see attached) that will be part of the larger workbook that will be linked with other sheets to auto fill in most fields. I am wondering if there is a way for an user to enter a Month and a Year at the top of the page and that in turn automatically fills in the days of the month by week.
So in attached sheet there are 5 boxes representing 5 weeks in a month. So if we used May 2014 as an example I would like to know if there is a way that once May 2014 is entered in up to top that. Excel fills in the dates in Week #1 with under Thursday showing 1st, under Friday showing 2nd as on for the entire month...
So as the month go by all user has to do is state the month and year and excel fills in the weekly dates for each day in month.
Attached File : Time and Attendance.xlsx‎
I have a date on the top left hand corner of my excel sheet. I want to add exactly one month to that date in a vertical list (without using micros)
Example:
1/4/2005
1/5/2005
1/6/2005
1/7/2005
1/8/2005
.
.
etc
PS: I tried adding 30 (or a similar number like 29). It works but not if I want a large list of dates, which is what I want.
I have the following (just a sample) "dashboard" ....
View 9 Replies View RelatedI have this macro (below) which produces the the date on a file name when I update it every month. However, I would like it to show a different version of the date and in a different location.
At present it produces the following (example):
Ice_Cream_Report_Month_07-02
What I would like is:
Ice_Cream_Report_Month_Feb07 (or even Feb-07 would be fine)
Macro:
Option Explicit
Private Sub ComboBox2_Change()
End Sub
Private Sub ComboBox3_Change()
End Sub
I am working in a spreadsheet that contains a bunch of data, it is not limited, and varies. It has some fiels such as: name, date of birth, address, and others. I am interested in creating a column with only the month digit of the date of birth for each row.
I have been working with some code, I am not quite sure how to continue. The following table would be a example that I have of the data, it has only to entry in the column of Date of Birth, but my data range will always vary. I want to get the month and past it in the next cell that is available in this case would be column c or 3... The worksheet name is REP.
VB:
Dim Cell As Range
' 1st cell with the posting date
Set Cell = Range("A2")
Do While Not IsEmpty(Cell)
If Cell = "Date" Then
[Code] .....
This is for a report and on "Summary Worksheet" I want to post "Current Payment" totals IF the invoices from "Tab 3" equal the "month" in G6. Say the report is for January - if there are invoices on Tab 3 -worksheet with a January date I want to post all invoice amounts on Summary worksheet under current payment.
View 4 Replies View RelatedIn a sheet I enter the following:
... in A1 a year (say 2012)
... in A2 a month, formatting as "MMM" (JAN, FEB, MAR etc.)
How to automatically get in column A (say from A3) all the dates of the month entered, formatting as "D/M/YYYY" (e.g. 1/1/2012, 2/1/2012/ 3/1/2012, etc.)?
I would like to create a monthly inventory, based on workdays (Monday - Friday)Myrna Larson has a formula that I would like to use with the workday function, but I don't know how to combine them.
=IF(A1="",A1,IF(MONTH(A1+1)=MONTH(A1),A1+1,""))+ = workday
to fit on the page, I need the dates to be from the 1st to the 15th, and 16th to the 31st. I am not sure how to write this either.
I have log data in two columns:
Column A: Date/time (at 30 minute intervals)
Column B: Numeric data
On the last row of each month, I’m trying to perform a SumProduct on the two columns and display that result in column C.
The end of the range is determined by the month in the current row.
I’m having difficulty finding the beginning of the range, though. I need to account for both the normal dynamic calendar days & the fact that I may get data starting mid-day and mid-month.
I have this formula, but I’m not sure how to make the first array dynamic or if this is even correct approach.
Manual
=IF(OR(MONTH(A1009)=A4)*(A$4:A$65536
I have a spreadsheet that has columns of monthly values for three years of financial data and where the values for the latest month are added to the last column. Months that have not been completed will have a zero value (e.g. Jul-09).
Jan-09
Feb-09
Mar-09
Apr-09........
I have a spreadsheet for monthly supplies. In row 1 is Jan – Dec and in the row 2 below are empty cells where there will be a total for that month’s purchases. I want a conditional format formula to automatically bold and highlight the current month’s total and month name.
Also, when I enter February totals next month and that number is input into February’s total, I want that month and total to bold and highlight BUT I also want the previous month’s bold and highlight to vanish at the same time. Is this possible?
Is there a way to make the attached worksheet automatically shade out all the Saturdays & Sundays in any given month everytime you change the Month/Year cell at the top of the worksheet, as example? I've tried using the weekday/Weekend formula, but can't quite get it right.
View 2 Replies View RelatedI am trying to automatically add the last day of the month based off of the month
for example
a1 = beginning date
a2 = end date
a1 will always be the 1st day of a given month
then based off a1, know the last day,(i.e.... october 1, then put 10-31-08 into a2, or november 1, then put 11-30-08......)
I have a database that I export to excel every month. The export process is built in the database software (ACT!2009). The export opens Excel with the standard Book1.xls file name. All the field columns will be the same every month.
Goal:
I need to format the spreadsheet to make it more readable and have been assigned the task of:
1 - Inserting a blank row between each row that contains data and filling in with color.
2 - Resizing the blank row to make it look like a "thick" border.
3 - Auto adjusting the columns to correct size.
4 - The last column contains comments and needs to be wrapped text.
5 - All of this needs to fit on 1 sheet (landscape).
Issues:
1 - Each month there will be a different number of rows.
2 - I know I can create a macro to do this but the macro that I would be creating will be in a saved template or spreadsheet. How could I use a that recorded macro in a spreadsheet that is called Book1.xls?
I have attached 2 spreadsheets. One called Book1.xls which is the raw data after exported and the 2nd spreadsheet called Formatted which is the end result that I am looking for.
My data sheet has a Month column, and those months are simply numbers one to twelve. They are formatted as plain old numbers. The data is coming from somewhere outside Excel.
How the numbers look in the data sheet doesn't matter. But I use this data to generate pivots, wherein the months are the columns. I want it to say Jan, Feb, etc. across the top of the pivot.
I realize that I could just loop through the raw data and convert the numbers to text. However, I want the pivot table to recognize this data as dates, so that I can do date-related stuff, such as the date grouping described on p. 85 of Jelen's Pivot Table Data Crunching book.
If I go into the raw data and try to convert the cells to the mmm format, they all convert to January.
I'm aware that formatting doesn't translate from raw data to pivot table anyhow. But it's not clear to me how I can use the date field grouping functions without somehow showing Excel that these are dates. Or is the pivot table smart enough to realize that just by the names, even if they are formatted as text?
I have a range of dates in c1:c285. I have a range of liters sold on those days in e1:e285. I want to total the liters sold per month for the 2 year period.
I was trying to use =SUM(IF(MONTH(c1:c285)=1,e1:e18,0))
However this just returns a "value" comment. I think even if this worked it would add the months together for the 2 years so both June figures would be returned as one figure.
I have a range of dates from 2003 to 2012. I formatted them to the 'Mar-01' option, but when I want to pivot on the month, Excel still reads them as the date - example 3/25/2008, 3/28/2008...and so my pivot table has multiple columns for all of the dates present in that month.
How do I truly format my dates so that excel reads them as the month only so that I can then pivot and show 12 columns (months) per year?
CASH BK
CASHIERS
DATE
CASH
TOTAL
DIFF
SALES
GBP
AR
GBP
AR
GBP
[code]....
above is the sheet template we use on a monthly basis. I would to like to use a command button which will run a macro creating a new sheet with the sheet name each month. The idea is to have a text box and a command button,enter the month in the text box and click the button. A sheet for the month to create at end.
How to correct this formula to get correct output.
=IF(P9=TODAY(),IF(P9<>"",CHOOSE(MONTH(P9),
"January","February","March","April","May","June","July","August","September","October","November","December"),""))
It's working fine if the year is 2014 but not if the year is different.
Conditions:
If the date is today then only the month should display else blank. The year should be ignore.
For example:
08/01/2000: January
01/01/2000: blank cell
08/01/2014: January
01/01/2014: blank cell
The date is in column 'p' in dd mm yyyy format. In short if the date is current date that is for today '8' then only the month should be display in the output.
I use a certain portion of our workbooks to enter the due dates of certain equipment, which are always listed in month/year (e.g. 4/17), and which means that they are good until the last day of said month. That is, a due date of "5/16" is good through May 31, 2016.
I'd like for my users to be able to enter "5/16" and have that cell properly identify as May, 2016 (instead of May 16 of the current year)...more specifically, the last day of May, 2016. All of this so that I can conditionally format any cell where that date has past - that is, if my user enters "5/16" on May 15, 2016, it won't flag.
I have a problem calculating something that happened last month if the month is january. At the moment, if the month is not January it works:
View 3 Replies View Relatedfunction in a spreadsheet that will list all of the days in
a given month automaticaly with the entry of the 1st of the month only.
Ex;
10/01/05 entered dated
10/02/05 auto fill
10/03/05 "
. "
. "
10/31/05 end of auto fill
I would like the function to stop filling dates at end of the month even for shorted months such as Feb.
the MONTH(NOW()) Function, as I need it to reference the month preceding the current month.
View 3 Replies View Related