Apply Conditional Format On Several Rows?
Aug 12, 2012
I have a conditonal format of cells across Row 2 based on the contents of cell D2. The formula for the conditional format is
=$D$2="NONE"
The formatting applies to these cells:
=$F$2:$G$2,$I$2:$K$2,$M$2:$N$2,$O$2,$T$2:$V$2,$X$2:$AA$2
I would like to fill in the same conditional format down to 51 other rows but the formatting for each row should be based on the contents of its own cell i.e. $D$3, $D$4, $D$5 etc. How can I do this with code?
View 2 Replies
ADVERTISEMENT
Aug 25, 2009
i have the following formula applied to a conditional format, on row 12:
cell value > less than =($K12:Y$111)*(1-0.05)
i want to use this on all rows, however i have 300+ rows.
Is there a way to apply this to all rows between column K and Y, i don't like the thought of creating 300+ conditional formats!
View 14 Replies
View Related
May 10, 2013
I have a column in a sheet referencing data from a column in another sheet in my workbook. I want to apply conditional formatting on these numeric values, from red for lowest vals to green for highest. However the fact that my column is referencing cells that will not yet have data means that they are being pulled over as 0. I am not displaying zero values in cells but the zero vals are still being included in the conditional format. Is there any way to discount these zero vals?
View 2 Replies
View Related
Feb 27, 2012
I recorded a macro in which I applied a conditional format to a range (the selection).But, when i replay this macro, the conditional format is only applied to the first cell in the range. This can be seen in the "Manage Rules" dialog of Conditional formatting, where the "applies to" column shows only one cell, even though a range of cells was selected by the code.
I set a breakpoint at the first line of code here, and confirmed that the selection is correct, and indeed it is, as in the immediate window, ?Selection.Address correctly gives "$O$6:$O$21".
[BRK, Selection.Address="$O$6:$O$21"]
Selection.FormatConditions.Add Type:=xlExpression, Formula1:= _
"=O6/(O6+P6)>25%"
Selection.FormatConditions(Selection.FormatConditions.Count).SetFirstPriority
With Selection.FormatConditions(1).Interior
.Pattern = xlGray16
[code]....
why the conditional format ends up only applied to cell O6 after the code runs?
"How can i apply a conditional format to a range of multiple cells, based on an expression, using VBA?"
Note that my range is within a PivotTable (but still, this works fine in the UI when i record the macro and the conditional format is correctly applied to the entire selected range).
View 1 Replies
View Related
Mar 31, 2013
I was wondering if is possible to apply a conditional format rule to a range of cells only when certain other cells outside of the range are the active cells. eg row C4-J4 has a conditional format to identify duplicates from range C5-C10, but I also want the same conditional rule to apply separately and uniquely if the active cell falls within the next active range D5-D10. So basically only apply conditional formatting separately and uniquely as the active cell moves its way across the columns?
View 3 Replies
View Related
Feb 9, 2009
I need to run a loop through a column of values (attachment col B) and when it finds a "J" it will apply conditional formatting to a row of 4 cells directly adjacent. The attachment is a theoretical before & after.
View 2 Replies
View Related
May 14, 2012
I am needing to format a spreadsheet using 2003 which only allows 3 conditional formats, but I have 4 conditions.
I need to highlight the row if column W has a
G - green (colorindex = 35)
R - red (colorindex = 3)
Y - yellow (colorindex = 36)
O - orange (colorindex = 44)
how I can do this?
View 7 Replies
View Related
Jul 3, 2013
I have a report with over 12,000 rows of info.
I have set conditional formatting to highlight yellow if the rows contain a certain word.
I need to delete all the non-highlighted rows.
View 2 Replies
View Related
Feb 19, 2014
Is it possible to alternate how a condition works over many rows? Say column C has work order numbers eg. C2:C7 shows WO1234, C8:C15 shows WO1235, C16:C25 shows WO1236 and C26:C30 shows WO1237. What I would like to do is have rows 2:7 red, rows 8:15 blue, row 16:25 red, rows 26:30 blue and repeat to end (the range would be column A to column N. Ive used =MOD(ROW(),2) for every second row but am not sure how to get it to look at many rows and alternate as needed.
View 6 Replies
View Related
Feb 25, 2008
I've been trying to get around the 3 rule limit for conditional formatting,
and I've found the code I need on the site
[url]
I've changed it to suit my needs
Private Sub Worksheet_Change(ByVal Target As Range)
Dim icolor As Integer
If Not Intersect(Target, Range("A1:A2000")) Is Nothing Then
Select Case Target
Case Is = "Test"
icolor = 6
Case Is = "Test2"
icolor = 12
Case Is = "Test3"
icolor = 7
Case Is = "Test4"
icolor = 53
Case Is = "Test5"
icolor = 15
Case Is = "Test6"
icolor = 42
Case Else
End Select
Target.Interior.ColorIndex = icolor
End If
End Sub
This works great for one cell, but I need to format a row range based on the single cell.
So if Test is entered into A1, then it changes to yellow, I also need the next 6 cells on the row to change too- In this case [B1:G1].
But it needs to cover the range in the code A1:A2000
View 9 Replies
View Related
Nov 17, 2008
I have a list of 50 sites (in rows) and their revenue for the last 12 months (in columns). I would like to use conditional format to highlight the highest number in each row but I can only do this one row at a time using top/bottom rules (top 1%). Is there a formula that I can use to do all the rows at once instead of one at a time?
View 9 Replies
View Related
Mar 7, 2007
What I am looking to do is format a row so that it is highlighted if one cell in that row meets one of two criteria or if another cell in that row meets one of two criteria: I was hoping to use the excel conditional formating tool but I'm stumped as I need 4 criteria and it can only do 3 criteria.
The cells in question require a greater than or less than criteria. If could use something like: Formular is =$AJ16 <= -0.11 or =$AJ16 >= 0.11 and
Formular is =$AK16 <= -0.11 or =$AK16 >= 0.11 I would be very happy but it won't let me do this - is there a way it can be done?
View 2 Replies
View Related
Feb 8, 2008
I've got a pivot table that shows different activities their cost, budget and percentage complete amongst other things. I would like to use conditional formatting to turn the font of a whole row grey if that activity is a 100% complete (exactly more then 99,5% complete in this case). I can do this with conditional formatting by selecting the individual rows and then setting the conditions. Example: selected row =$45:$45, Formatting condition =$J$45>99,5%.
However I've got 1500 rows to do....how can I set this condition for all rows in one go?
View 2 Replies
View Related
Feb 11, 2014
do a conditional format rule that will highlight every other row of my excel spreadsheet when the value in a specific Column (say Column A) differs than the previous.
I've attached a sample worksheet with what I want it to look like after the conditional format rule is applied (every other row highlighted in light blue). The rule needs to apply to all rows in the worksheet beginning with ROW 2 (I don't need the rule to apply to the column header which is in ROW 1).
View 4 Replies
View Related
Nov 11, 2009
(Core starting issue solved but other threads were created to continue with trouble spots.)
I'm terrified to use VBA just yet, so right now I'm determined to highlight values in my spreadsheet just using conditional formatting.
I have 5 plus 1 columns of data. For example,
A B C D E....F
3 2 4 5 7....2
4 6 1 3 4....1
4 7 4 5 8....4
2 1 5 3 9....1
I successfully applied a MIN formula to compare between columns on each
row and display in F the MIN value. Notice each cell going down F has the
minimum value in analyzing across each row.
Now, I *also* want to apply a formula on the whole F column to compare these resultant MIN values
and give me the MINIMUM value between those as well, so now I'm comparing across
rows. Got it? Now then.....I want the ENTIRE row that has this MIN value in F to be highlighted, because that will be the best choice for the application of what I'm doing. Did you understand this paragraph. It might have been confusing, but I think I said everything correctly, so read it carefully.
I've tried all sorts of "Formula is", "Cell value is", dollar sign this, dollar sign that, no dollar sign this, <, >, =, highlighted ALL the block of data, highlighting JUST the column across the rows of which will be compared, only highlighted one cell, but nothing has worked.
Is my problem that you can't have 2 formulas in one cell? So then I thought I should ADD another condition, but nothing works.
Let me throw in one more element that I did not state. If anywhere down the F column there is a 0, I don't want that to be my minimum. I want it to evaluate and give me the minimum value greater than 0.
Please read everything I wrote carefully. It might be confusing, but I hope someone has an answer, because it sure has frustrated me.
Now, I'm thinking that VBA programming may give me answers, but I am so terrified of macros, I don't know how to begin that. I have this impression based on the many sites I've looked at on the internet that many people do macros and it's quite easy, but it's funny to me that I am so scared. There's something about me freaking out that I won't have a period or a quote in the right place and I'll stress my day away over it.
View 14 Replies
View Related
Sep 8, 2009
I´m having aproblem with Excel 2007 about Conditional Formatting. I have a row of Dates for example 02-01-2009 03-01-2009 04-01-2009 , etc in different columns.
Then what I want to do is use Conditional Formatting to Format cells on several rows below according to the day (if its weekend paint red, if not, dont do anything). I'm using the "Use a formula to determine which cells to format" and the condition is (supposing the cells with dates are A1 to C1)
=WEEKDAY(A1:C1) > 5 .
So with those 3 dates provided lets suppose Januar2nd is not a weekday, so the outputIwant is: Red White White, (Next Row) Red White White, etc for several rows.
Now what I think is not right is it only works for the row in which I have the cursor so its like: (Lets imagine I selected 3 rows on which I want to see that output) Red White White (The row in which the cursor is works fine), but the next row goes Red Red Red and the third the same.
View 5 Replies
View Related
Apr 3, 2014
Code is trying to
1. Where there is data in column B
2. Goto first row of data
2. If column J = "Closed"
3. then select Cells from column B to J in that row and colour these cells in red
4. If column J= "Open"
5. the select Celss from column B to J in that row and colour these cells in grey
4. Repeat for next row until you get to cell in column B where there is no data.
Recieve run time error 1004: Method 'RAnge of object_GLobal failed
===============================================================
Sub Colourclosed()
Sheets("Risks").Select
Dim LastRow As Long
Dim i As Long
LastRow = Range("B" & Rows.Count).End(xlUp).Row
For i = 8 To LastRow
If Range("J" & i).Value = "Closed" Then Range("B", "J" & i).Select
Selection.Interior.ColorIndex = 3
[code].....
Note: I've managed to do it for one cell ie for Column B by replacing "If Range("J" & i).Value = "Closed" Then Range("B", "J" & i).Select with "If Range("J" & i).Value = "Closed" Then Range("B" & i).Select" This works but only colours in cell in column B, how do i do this so it colours range of cells
View 4 Replies
View Related
Sep 14, 2012
I am trying to create a macro (which will go in an add-in, using Excel 2007) which will apply a custom format to any selected cells which have their formulae hidden (Format Cells, Protection, Hidden). A similar macro works fine for locked cells.
Here is the UDF I wrote, which returns True/False based on the Hidden status of a cell:
VB:
Public Function Hidden(Check_Cell As Range)
Hidden = Check_Cell.FormulaHidden = True
End Function
[Code]....
just place all three pieces of code into a module, and change the first line of the two macros to a standard "Sub Macro1()" type format.
View 9 Replies
View Related
Jul 3, 2014
I have a workbook that contains 168 sheets of data (it's an extract from a PM tool) which is effectively a status report from each project in our portfolio. Contained within each status report are some financial data that shows a Plan number and a Forecast number for which I want to apply conditional formatting to this section (this is the same section for each sheet), to all the 168 sheets without having to go individually into each sheet. I have searched here and all the varying responses to a similar situation as mine, do not cater for the number of sheets that I have. And I need to do this on a monthly basis at monthend. So in the example below I want to apply conditional formatting if the Forecast (Cols D & G) are greater than Plan (Cols B & E). Is there a way of doing this just with the conditional formatting or would it need a VBA script?
Col A Col B Col C Col D Col E Col F Col G
Financial Summary - Selected Project Currency: USD
Current year total cost
Overall project cost
[Code] .....
View 1 Replies
View Related
Dec 31, 2013
I wish to have one conditional format apply to K and L. Presently it's L only where it works.
=OR(K1="",AND(K1="No",L1<>""),AND(K1="OJ",L1=""))
Why when I change the range from =$L:$L to =$K:$L does it not apply to both?
View 3 Replies
View Related
Feb 4, 2014
is possible to construct a conditional formatting scenario and at the same time apply that formatting if the cell entry is within 10% either way of the logical test?
For example if you apply conditional formatting if the cell value is between 300-500 is it possible to add in a 10% swing on each value?
View 3 Replies
View Related
Jun 27, 2014
I have a conditional formatting issue, using VBA.
My conditional formatting code works fine for one column; however, when I try to apply the conditional formatting to two columns, the code only applies to the first column listed. Additionally, I have two sets of "rules" that apply to the same column. One of the "rules" includes two columns. The other rule applies to only one column. I'm not sure if this is my issue, or whether I'm trying to apply the same code to two different columns.
My code is below.
Code that applies to column "M" only...
View 3 Replies
View Related
Feb 29, 2008
I'm trying to find a macro to apply conditional formatting to a large number of cells,
What I would like to do is when cell E96 has a value of a, cells E3:F95 are shaded in grey. Then when cell G96 has a value of a, cells G3:H96 are shaded in grey, and so on down to IU96 having a value of a and cells IU3:IV96 shaded in grey.
View 9 Replies
View Related
Jan 28, 2009
I would like to create a textbox that displays the typed numbers as currency format (similar to selecting currency format for a cell)
so that as the user types in 9999 they will see the textbox populate with
$99.99 instead of just $9.09 which is what happens when I try the following code
View 9 Replies
View Related
Aug 22, 2006
I have used VBA to apply conditional formating to a range of cells. i.e if cell B14 <>"" then row 14 is pale blue untill cell V14 is populated with the time then it removes the formating. One criteria is that if Q14(21/08/06 20:00)>NOW(AA2) and < NOW+1(AA3) then Row turns green(i.e. is due in the next 24 hrs).
Problem is that this formula is applied after a field is updated. When 21/08/06 20:00 comes and goes the row remains green unless I update one of the fields along that row. What would I have to do to make the formating change back automatically when the critera is no longer being met. Here is my codethere are 2 other if statements similar to this with in this code but this is the only part that shouldn't require any user input for the formatting to occour)
Private Sub Worksheet_Change(ByVal Target As Range)
Const WS_RANGE As String = "B13:AP162"
On Error Goto ws_exit:
Application.EnableEvents = False
If Not Intersect(Target, Me.Range(WS_RANGE)) Is Nothing Then
With Target
If Me.Cells(.Row, "AP").Value = "YES" And _
Me.Cells(.Row, "Y").Value <> "" Then
Me.Cells(.Row, "B").Resize(, 30).Interior.ColorIndex = 43 'mad green
Else
End If
End With..................
View 4 Replies
View Related
Aug 29, 2006
I have created an excel file that contains a lot of worksheets which contain a lot of raw data and charts. There are 5 different tabs for 5 different companies. Each tab currently contains only 1 year of raw data for that company. Then I have another excel worksheet that has nothing but charts on it. Each chart is a bar chart that shows each of the 5 companies. It also shows the current rate for the month for each company and the 12 month average for each company. On the chart there are also 3 lines. There is a standard line that we try to meet each month. There is also a line for the upper control limit and a line for the lower control limit. Here is my problem:
The 2 bar charts (current rate for the month & the 12 month average) are created and updated by the raw data in each of the 5 data sheets.
Based upon the values in each of the cells that create and update the bars on the charts themselves:
I want the bars to be RED if the values are below the lower control limit.
And I want the bars to be GOLD if the values are above the upper control limit.
And I want the bars to be green if the values are in between the upper and lower control limits.
View 2 Replies
View Related
Dec 2, 2013
I have a column filled with time data that I want to copy in to a column formatted to a time format (hh:mm:ss), the thing is when i copy the data to it the format does not apply unless i double click each of the brackets, there are 14000 lines so doing it manually is a hastle to say the least, is there a way to apply the time format immediately?
View 2 Replies
View Related
Dec 3, 2008
I have a column (A) where there's a date in each cell. Currently it is formatted as category "text". All entries where initially entered as 'yymmdd', but using category "number". Beacause of that all zeros in the year disappeared, so now they are shown as "ymmdd".
Can someone show me/tell me how to convert all these dates from category "text", to category "date", using format "yymmdd"? I have tried again and again and again, but can't make it work. I have attached a sample of the sheet.
View 4 Replies
View Related
May 19, 2014
Column b in sample is conditionally formatted based on it's values. I want to also apply that same formatting to the person's name in the chart in D2:I9. For example, Jeff is in bottom 50% so cell B2 is shaded red with red text. I would like to apply that same red shade and red text to all the cells in my chart that say Jeff. Also, as example, all of the cells in my chart that say Kelsey would be formatted with green shade/green text and so on...
View 1 Replies
View Related
Jul 13, 2013
I have a table. I want to apply conditional formatting to the entire table so that wherever a cell contains a dropdown list (validation list) the cell is formatted with a different colour.
View 3 Replies
View Related
