Last week I was having no problem accessing the company's Database using Excel 2010. Thursday, my computer was replaced during an upgrade to Microsoft 7. Now, I am getting this Microsoft [ODBC Driver Mismatch] error. The exact message is:
[Microsoft][ODBC Driver Manager] The specified DSN contains an architecture mismatch between the Driver and Application.
bool = IsError(Application.WorksheetFunction.Match(ws1.Range("D" & i) & ws1.Range("G" & i) & ws1.Range("H" & i), ws2.Range("A3:A" & LR2) & ws2.Range("B3:B" & LR2) & ws2.Range("C3:C" & LR2), 0) > 0)
I am wanting to return a boolean result for if a multi-condition match is found. In pseudocode, I want to basically determine if the value in Column D, G, and H on worksheet 1 for a given row is repeated in Columns A, B, and C on worksheet 2 in any row. I have all variables properly dimmed.
I finally completed a macro that would loop through selected workbooks in a folder and pull results to be shown in a new workbook.
This works fine by using a worksheet where the files are listed and in a1 of the worksheet, the path to the folder.
We have one workstation on the LAN with restricted access to the server, and therefore has mapped drives. Therefore the path to the folder containing the workbooks is different.
How could I instruct the macro when invoked - so in the case of that workstation - if the macro cannot find the files at the path stated in a1 of the workbook, it is to try a different location (The folder containing the workbooks is actually Drive:T)
1: two colums of data for each car (lap distance covered and speed). Now each driver is going to decide to brake at different points.
2: i have coner data (eg corner 1 is at 150meters to 200 meters, corner 2 is at etc)
3. I am trying to create something that will do the following.
determine the lap distance at which the driver is braking (the point where speed decreases). I would like to do this for each corner and each driver. I am struggling to find a way of determining how to read the "lap distance" value when the corresponding "speed" value stops increasing and actually starts to decrease. This is the point at which the driver is braking
I wish to add a add in in exel XP 2002 with Windows SP2. For that I have three file has to install:
1 fichier.lgc has to install in Windows applog
First problem I do not find this repertory hidden under same XP SP2 with the good options to select in Windows to explore. Thus I have to arrange this file in Windows appPatch and in Windows Prefetch in the place and the problem comes from I think.
1 fichier.xll has to install in office xlstart
1 fichier.ppp has instaler in office xlstart
And when the double click on the fichier.xll for the throw the error message is as follows “WinRT Driver not installed”. Thus my questions are is this normal that I do not find the file Windows applog under win XP SP2 and how to install WinRT driver. Or then where to arrange my fichier.xll which must normally be in the repertory Windows applog
I have attached the xlx sheet. I am a truck driver and I always have to calculate my weekly wage on paper.
I start everyday at different times it varies the end of shift as well. We have day shift, night, saturday, sunday payrates.
I have done an excel sheet I was trying for a couple of days reading forums and watching videos but just I couldn't.
Example if I start Friday at 18:00 and finisth Saturday at 04:00. I have in total 10 hours.
Day shift: 1 hour
Night shift: 5 hour
Saturday: 4 hour
So in one shift I get 3 different payrate. In one shift if I work more than 6 hours it must be deducted 00:45 minutes.
Day shift: 07:00-19:00 - £10.7
Night shift: 19:00-07:00 - £11.7
Saturday - £12.7
Sunday - £14.7
Attached File : DRIVER SHIFTS VARIABLE SHIFTS AND PAYRATES.xlsx‎
Im copying and pasting data from one workbook to another but when I want to close the source workbook, it comes up with this message that I have much data and if I want to keep this in a clipboard. I thought I could disable this with Application.DisplayAlerts = False but when I do this, Excel freezes. Im I doing something wrong. How can I supress this window?
Public path As String
Sub Get_data()
path = "\Nlchoosa.nlOPS_Processes$OPS_ProcessesReports Sector performance"
Workbooks.Open Filename:=path & "ReportsSector Performance Reporting week.xls"
Range("A1").Select
Range(Selection, Selection.End(xlToRight)).Select
Range(Selection, Selection.End(xlDown)).Select
Selection.copy
Windows("Sector Performance report Week.xls").Activate
ActiveSheet.Paste
Application.DisplayClipboardWindow = False
Windows("Sector Performance Reporting week.xls").Activate
Application.DisplayAlerts = False
End Sub
I'm trying to write a Macro that, in the active sheet (which contains plenty of data), deletes rows according to several criteria, for example:
- if cell(i, ar1(j)) = ERROR, delete row i and shift 1 up
(ar1 is an array of column numbers)
- if cell(i, ar3(j)) = 0, delete row i and shift 1 up
(ar3 is another array of column numbers)
Etc.
The problem is that, when I run it, I get a "Type Mismatch" error message, and I don't understand why. Here is the
Sub Delete_invalid_rows()
Dim i%, j%
Dim Nr%, valid As Boolean, BYPdata As Boolean
Dim ar1, ar2, ar3, ar4 As Variant
Nr = 1379
ar1 = Array(11, 14, 19, 20, 22, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 64, 65, 66, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 104, 106, 107, 109, 112, 116, 126, 127, 128, 129, 131, 133, 134, 135, 136, 137, 138, 139, 140, 142, 143, 145)..............
I am getting a type mismatch with the following:
HTML Code:Â
Private Sub Export2Pdf()
Dim sFileName As String
'Create file name
sFileName = Range("employeename").Value & " - Payslip" & " - " & _
Format(Range("enddate").Value, "dd mm yyyy")
[Code] ........
something to do with this:
HTML Code:Â
sFileName = Range("employeename").Value & " - Payslip" & " - " & _
Format(Range("enddate").Value, "dd mm yyyy")
I have used this code previously and it worked however I now get a type mismatch error in the line coloured red..
View 8 Replies View RelatedThe line I first used was:
var all_spans = document.getElementsByTagName( 'SPAN' );
for( var i =0,skip =0 ; i [code].....
I am getting error Type mismatch error the moment i enter value in Cell T54 and CLICK "DAILY" on Daily button.Waiting for the solution.
I am attaching the file.
I have four columns of data and 25 rows (A1:D25). I wish to add this to a multi-column list box in my user form. My userform is called FundSelect, and my listbox is called FundList. The ColumnCount property is set to 4. When I use the command:
View 4 Replies View RelatedI'm trying to write a pretty simple macro which invokes a built-in DDE function to retrieve some data, then when the data is retrieved, just show a msgbox. When the data is finished being retrieved, cell(20,11) in the sheet "Historical Data" will automatically have "FINISHED" placed in it. So while the retrieval is taking place, I'm simply looping and checking the contents of this cell waiting for it to read "FINISHED". My problem is the 'Do While Sheets("Historical Data").Cells(20, 11) <> "FINISHED"' line generates a "Type Mismatch Runtime Error 13", which I can't for the life of me understand why.
View 2 Replies View RelatedI have a while loop that counts backwards in a seriescollection to find the last value with data. In one particular case, I had to use an IF formula in the source data where it would output NA() if the statment was false, so instead of loop through empty strings until the loop finds a number, it loops through #NA until it finds a number.
This ALMOST works. In Debug mode, the loop actually returns a value of 141, which is what I want, but it won't store it in a variable.
Code:
Dim arrRedLimit As Variant
Dim dblRedLimit As Double
Dim i As Long
[Code]....
(P.S. why I would have "NA" as an output, its because it won't graph, where putting "" for my false condition did)
I am using this code:
Code:
With wshvar
.Range("A16") = Application.Index(wshcore.Range("A:A"), Application.Match(.Range("A17"), wshcore.Range("A:A"), 0) - 1)
.Range("A18") = Application.Index(wshcore.Range("A:A"), Application.Match(.Range("A17"), wshcore.Range("A:A"), 0) + 1)
End With
but receiving a 'Type mismatch' error with the highlighted code.
I tried to find value on the other workbook. Gives me error "Type mismatch"
Below is the code in my VBA project
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
Application.ScreenUpdating = False
Dim ResVal As Variant
Dim FindId As Range
If Range("Cnst") 1 Or Target.Row = 1 Then Exit Sub
[Code] .......
This is likely Y.A. pathetically useless/misleading/incorrect error message. Anyone know what the real problem might be? XL03 on XP.
Run-time error '13':
Type Mismatch
dim c as Range
...
Set c = .Find(what:="LIQ", _
LookIn:=xlFormulas, _
LookAt:=xlPart, _
SearchOrder:=xlByRows, _
SearchDirection:=xlNext, _
After:=ActiveCell, _
MatchCase:=False)
ActiveCell is a single cell on an unhidden sheet - cell A279.
I can Control-F at this point in Excel, and it finds "LIQ" just fine.
Now here comes the queer part. At least at THIS moment, if activecell is on rows 1 through 26, NO PROBLEM. If it's on rows 28+, death message shown above. J27 is the point where death begins. I've cleared i27:k27 and there's nothing notable there. L279 is the end of UsedRange.
Since this clearly is a bug, I'll really reach far now: there is a "drawing symbol" (a big "right brace") that begins at J34, if that's a clue. (I'm mystified as to what worksheet cells are connected to big drawing symbols like this.)
I have a piece of VBA code that acts weird. For brevity I am doing a function call like this:
val=MyFunc( [D1] )
and
Function MyFunc(mean As Double)
D1 is a named range which is a single cell. It contains a double.
The problem occurs when the value is zero, I get a type mismatch on the function call. If it is non-zero all is well.
What would cause this? I could see if zero was invalid inside MyFunc() that some calculation might blow, but it nevers gets into the function. Looks like the compiler is stopping it.
Range("C1:C" & x).Value = WorksheetFunction.Transpose(Result)
I'm trying to run it in 2007. It works in earlier versions.
I get Type Mismatch error. Result is dimmed as variant type.
I have some code which i trialled in a blank workbook and was fine. when i pasted it into the workbook i am working on, i get runtime error 13 type mismatch.
Sub Trackj()
Dim a As Long
For a = 1 To Sheets.Count
If InStr("master", Worksheets(a).Name) < 1 Then
Worksheets(a).Cells(40, 6).NumberFormat = "hh:mm"
Worksheets(a).Cells(41, 6).NumberFormat = "hh:mm"
If Hour(Worksheets(a).Cells(40, 6)) = Hour(Now()) Then
If Minute(Worksheets(a).Cells(40, 6)) = Minute(Now()) Then
Worksheets(a).Range("B2:B30").Copy
Worksheets(a).Range("B52:B80").PasteSpecial (xlPasteValues)
End If
If Hour(Worksheets(a).Cells(41, 6)) = Hour(Now()) Then
If Minute(Worksheets(a).Cells(41, 6)) = Minute(Now()) Then
Worksheets(a).Range("B2:B30").Copy
Worksheets(a).Range("D52:D80").PasteSpecial (xlPasteValues)
End If
End If
End If
End If
Next a
End Sub
And the line that gets hilighted in the editor is:
If Hour(Worksheets(a).Cells(40, 6)) = Hour(Now()) Then
what i know what's actually type mismatch and how do i solve it?
View 9 Replies View RelatedWhen my macro runs through the above code, I get a type mismatch error. All of the cells are formatted at Date only.
View 9 Replies View RelatedWhen I run the following code I get a (Run-Time error '13': Type mismatch). When I click debug it highlights line 41
[Code].....
I am trying to accomplish the following: iterate through rows of a selection, delete row if the first column cell is empty or the second column cell equals 0.
So far I have:
[Code] ........
I am getting a type mismatch error at my if statement.
i have written a vba code to open excel file saved at network server. The issue is code opens the file but gives "Runtime Error 13 Type mismatch"
Code :
<code>
Sub test_opening()
Dim filepath As String, filename As String, completename As String
Dim hurray_macros As Workbooks
[Code].....
I seem to have some type mismatch in my macro...
The error appears every time i insert or delete a row in the worksheet.
This is the ....
I made this case statment below to look at a cell in Q and if the cell value is "Large Area" then the cell in P same row should be 1 if the case is Varsity then it would be 2 however I keep getting a Type Mismatch. I tried Picker.Text and Picker.Value as well I didn't get errors but it didn't work either.
View 5 Replies View RelatedI have attached a sample file for you to easy reference. So when the code run until the loop function, it will prompt an error message.
The idea is to open the selected file and the copy the data from the selected to this master file by searching the column A. Column A has the identical text in all the files that are to be copied from.
I am trying to only have the option 1, 2, or 3 be entered. I have that part down, but if someone clicks cancel or just closes the input box i get the type mismatch I believe because no integer was found....is there a way around this?
Dim intResponse As Integer
intResponse = InputBox("Choose One" & Chr(10) & Chr(10) & "1 - Lease Lock" & Chr(10) & "2 - Upgrade" & Chr(10) & "3 - Lease Lock & Upgrade", "Contract(s) sent out")
If inResponse <> 1 Or strResponse <> 2 Or strResponse <> 3 Then
MsgBox "Must choose (1,2,3)"
Exit Sub
End If