Mapped Driver Macro Option
Feb 3, 2009
I finally completed a macro that would loop through selected workbooks in a folder and pull results to be shown in a new workbook.
This works fine by using a worksheet where the files are listed and in a1 of the worksheet, the path to the folder.
We have one workstation on the LAN with restricted access to the server, and therefore has mapped drives. Therefore the path to the folder containing the workbooks is different.
How could I instruct the macro when invoked - so in the case of that workstation - if the macro cannot find the files at the path stated in a1 of the workbook, it is to try a different location (The folder containing the workbooks is actually Drive:T)
View 10 Replies
ADVERTISEMENT
Feb 16, 2012
Last week I was having no problem accessing the company's Database using Excel 2010. Thursday, my computer was replaced during an upgrade to Microsoft 7. Now, I am getting this Microsoft [ODBC Driver Mismatch] error. The exact message is:
[Microsoft][ODBC Driver Manager] The specified DSN contains an architecture mismatch between the Driver and Application.
View 4 Replies
View Related
Jul 30, 2006
1: two colums of data for each car (lap distance covered and speed). Now each driver is going to decide to brake at different points.
2: i have coner data (eg corner 1 is at 150meters to 200 meters, corner 2 is at etc)
3. I am trying to create something that will do the following.
determine the lap distance at which the driver is braking (the point where speed decreases). I would like to do this for each corner and each driver. I am struggling to find a way of determining how to read the "lap distance" value when the corresponding "speed" value stops increasing and actually starts to decrease. This is the point at which the driver is braking
View 9 Replies
View Related
Oct 1, 2006
I wish to add a add in in exel XP 2002 with Windows SP2. For that I have three file has to install:
1 fichier.lgc has to install in Windows applog
First problem I do not find this repertory hidden under same XP SP2 with the good options to select in Windows to explore. Thus I have to arrange this file in Windows appPatch and in Windows Prefetch in the place and the problem comes from I think.
1 fichier.xll has to install in office xlstart
1 fichier.ppp has instaler in office xlstart
And when the double click on the fichier.xll for the throw the error message is as follows “WinRT Driver not installed”. Thus my questions are is this normal that I do not find the file Windows applog under win XP SP2 and how to install WinRT driver. Or then where to arrange my fichier.xll which must normally be in the repertory Windows applog
View 4 Replies
View Related
May 27, 2008
I have read your loop instructions under FAQ entitled; Loop through a folder of workbooks. It works very well on a local drive but I need to have it loop through a folder on a network drive. the drive is mapped as h:\computer name2008shareddocs
View 2 Replies
View Related
Jul 25, 2014
I am trying to move and rename an excel template file using a macro. My code works fine when it is moving the file locally on my C: drive. However, when I try to do it on a mapped network drive I get a Path/File access error. Here is the relevant code:
[Code] ......
I tried it both ways that are commented out - both give me the error. I have permissions to read/write in all relevant folders. What am I missing here?
View 2 Replies
View Related
Oct 23, 2013
I have written code that allows the user to open a file. To make things easier I changed the file path to point directly to the folder where all the needed files will be placed. The problem is everyone that will be using this work book map their drives differently. One user may have it as H, and the other as J. Also users can have the same drive mapped but at two different starting points. Ex: H:DataReportsxxxyyy or H:Reportsxxxxyyy this causes the code to crash. Is there a way do default the path so it will not matter how the drives are mapped?
Here is what I am using so far:
Dim filt As Variant ' flit to be used in the getopenfile. variant is need for its multiple
Dim FilterIndex As Integer
Dim Title As String
[Code]....
View 2 Replies
View Related
Dec 15, 2013
I have attached the xlx sheet. I am a truck driver and I always have to calculate my weekly wage on paper.
I start everyday at different times it varies the end of shift as well. We have day shift, night, saturday, sunday payrates.
I have done an excel sheet I was trying for a couple of days reading forums and watching videos but just I couldn't.
Example if I start Friday at 18:00 and finisth Saturday at 04:00. I have in total 10 hours.
Day shift: 1 hour
Night shift: 5 hour
Saturday: 4 hour
So in one shift I get 3 different payrate. In one shift if I work more than 6 hours it must be deducted 00:45 minutes.
Day shift: 07:00-19:00 - £10.7
Night shift: 19:00-07:00 - £11.7
Saturday - £12.7
Sunday - £14.7
Attached File : DRIVER SHIFTS VARIABLE SHIFTS AND PAYRATES.xlsx‎
View 7 Replies
View Related
Nov 5, 2012
how to create a list of the drives on my computer using VBA. Maybe I missed something.
View 2 Replies
View Related
Sep 6, 2013
I have several option groups (Y & N in each) linked to cells to display TRUE / FALSE depending on which option is selected in each group. I have another cell which I want to apply conditional formatting to if EITHER Y or N is selected in all groups. At present I use COUNTIF to check for FALSE=0 in the linked cells which works if all the answers are Y. How do I apply CF if there is a mixture of Y & N (TRUE / FALSE) in all groups (I'm not sure if I've explained that well or not).
Excel 2013
View 1 Replies
View Related
Oct 1, 2008
Just a curios question is it possible to have a button on a macro that if you press it would run one set of instruction, but if the user was holding a key down say the shift key and pressed the same button, it would run a second set of instruction
EG
If [Shift] key active then
Run command 1
else
Run command 2.
View 9 Replies
View Related
Apr 14, 2014
I have a macro that runs when a spreadsheet is opened however i sometimes need it not to run. Rather then furiously hit escape i was hoping to get a dialog box that would prompt yes/no to run the macro and if an option was not chosen after a few second then to run the macro anyway (so basically only by clicking "no" would you stop the macro from running).
I found this code here that gives me the yes/no message box and the 5 second time-out to get rid of the message box, however if the message times out it doesn't run the macro. what i need to tweak to make it do so if no input comes from the user? [URL]
View 2 Replies
View Related
Dec 26, 2007
I have done much searching, found some relevant, similar postings, but I have not been able to make it work for my code. I want to have multiple option buttons and have a macro determine which one is selected. One similar posting had macros run from the clicking on the option button, but I want the macro to determine which is clicked and then return some functions. From my research...this is my code.
Sub temp()
If OptionButton1.Value = True Then
Range("C1").Select
Selection = "OB1"
Else 'assuming two buttons and first is false
Range("C1").Select
Selection = "OB2"
End If
End Sub
This gives me an "Object Required" error on the first line of the code.
View 2 Replies
View Related
Aug 20, 2008
1. I have a list of data (Collated Data)
2. For every row in collated data I want to export the cells into a corresponding cell in my predetermined workbook (TAF Form), i.e, Cell C1 on Collated data goes into Cell D3 on TAF Form, cell D1 to cell I3 etc etc
3. Once all cells in one row have been copied into the TAF Form I want that TAF Form to save as "TAF Form & Employee Name" (which would come from cell D3).
4. I then want "TAF Form & Employee Name" to close.
5. I then want the Macro to do the same thing for Row 2, copy the cells, save the form, close the form
6. I want to do this for every row that I have (which varies).
Is this possible? If you have any more questions in terms of what I need, don't hesitate to ask.
View 5 Replies
View Related
Oct 16, 2007
Im looking to create a macro that goes to a specific sheet on my workbook upon selecting an option. Example being I open the spreadsheet and a list of options come up such as:
BRIAN
JOHN
JAMES
PAUL
STEVEN
Upon selecting one of those names you are transferred to the sheet named "BRIAN", "JOHN", "JAMES" etc etc etc
View 4 Replies
View Related
Nov 9, 2012
I Have a tool which will be used online & offline.
I would like a box to appear on the opening of the spreadsheet which asks the user "Are you online?", with options "Yes" & "No", if the user selects "Yes" then a macro (which i have already written) refreshes the spreadsheet.
if the user selects "No", the sheet is not resfreshed.
What is the best way to do this?
View 2 Replies
View Related
Feb 20, 2014
The below code works well. However I would like to give the users an option to opt out of running the code when the message box appears.
Code:
Sub delete_sheets()
Beep
MsgBox "This will delete All Sheets but the active sheet"
*****this is where I would like to use an additional message box or include it in the above message box an option for the user to cancel this code****
Range("XA1") = ActiveSheet.Name
ActiveSheet.Name = ("Delete_Sheets")
Dim ws As Worksheet
Application.DisplayAlerts = False
For Each ws In Worksheets
If Not ws.Name = "Delete_Sheets" Then ws.Delete
Next ws
[code]....
View 1 Replies
View Related
Feb 19, 2009
A VB macro is created on a excel sheet. & assigne that macro to one button (by using Customise option) which is added on Menu bar.
So what i want to know is that is it possible to make the button works in all excel sheet.
Because when ever a new sheet is opened the button which i have added is visible. But when i click on that button the macro will not work or it opedns the original sheet on which macro was designed.
View 9 Replies
View Related
May 30, 2007
I'm done creating a macro. how can i do to compile it. I know there is an option in the tool bar, but i don't get any .exe file after clicking on that option. Do i need any compilator library or something?
View 5 Replies
View Related
Dec 22, 2009
I have been modifying a workbook and the original macro will send to the sheet Results once the "Search" button is clicked, but I have found that this macro is displaying duplicate records. Can anyone help me put in an auto filter to find only unique records? My second workaround option is if someone can help me remove the go to/select sheet option from the "Search" macro so that a user will not automatically be sent to the Results tab and will instead hit the "Confirm Category Selection" button (which auto filters before sending the user to the Results tab).
View 12 Replies
View Related
May 23, 2008
I have a sales spreadsheet, that people on this forum have very kindly helped me with by giving me two macros; one to remind users that they need to update the month cell when an order comes in, and the other to automatically put the date in a cell when any cell in that row is changed.
The final thread is here: Message To Remind That Cell Is Mandatory
and the Macro used is:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim c As Range
Application.EnableEvents = False
For Each c In Target
If c.Column = 11 Then
If c.Value = "100 - Purchase Order In" Then
MsgBox "Is the Month In correct?"
End If
End If
If c.Column > 1 And c.Column < 18 Then
Cells(c.Row, 1) = Now
End If
Next c
Application.EnableEvents = True
End Sub
However...
We've now found that we cannot undo anything in these spreadsheets. If, for example, a cell is incorrectly copied or deleted, the only way of undoing the change is to shut down the spreadsheet without saving!
Is this just a by-product of using the time macro (a search on other threads suggests that it might be), and, if so, is there any way of changing it?
View 9 Replies
View Related
Jan 18, 2014
I am using the following code to find a NAME in my work sheet and to enter their status. But this macro is not compatible if a duplicate or Similar name exist.What I need is I need this macro to activate the search NAME Cell and then a VB box with OK & NEXT button has to appear. if the activated NAME is exactly the one I am searching, then I will click the OK button then it should display the "Enter Employee Status" box and as continue in my code, But If I press NEXT, the macro should search the next similar NAME and activate it, This process should continue until I click the OK button. (Same like CTRL+F function with an additional Status entry button)
Code:
Sub Button1848_Click()
Application.ScreenUpdating =False
Dim BeginCol AsLong
[Code]....
View 4 Replies
View Related
Sep 7, 2008
How to supress Enable Macro option while open a excel file. I would like to do it using VBA in Macro of excel 2007 + versions.
View 9 Replies
View Related
Jan 7, 2010
I'm trying to do a few things actually. I am somewhat a newb at programming, although I do understand how C++ and the coding works within Excel. To me, it's like the English language...knowing all of the vocabulary and formatting it right is important. If I don't know the vocabulary, I don't know what options I have.
This tool is being used in the call center I work in. It is to help eliminate repititious information used to notate accounts. I have attached a picture of what the tool looks like so you can have a better idea of what I'm working with. Here are a list of things I'm trying to do which I have searched and not found answers to:
1. I am trying to use a middle mouse scroll to scroll through validation list. This list information is located on a different locked tab. Basically, I have a few rows where a drop down selection can be made and it would be easier to scroll rather than manually moving the slider within the validation list.
2. As you can see, this "tool" an employee and I have created has many buttons. What I would like to do is to be able to click a button on the right and have it "stack" text within a single cell. In other words, if I click the button once, the text may be entered into the "actions taken" cell. If I click another button, I can have the option (or maybe a little "+" next to the button) to add this button's information to the end of the information already entered within the "actions taken" box. I've tried recording and using the keyboard and selecting "end" and then having the text added, but it didn't work. I've seen "loop" VBA code, but I don't want something to repeat, I want it to stack in the cell when clicked manually.
I'm sure there is a way to make the tool much better using VBA code and not use Excel, but I don't have an extensive knowledge of Excel to do something like that. I'm a very fast learner and understand how the coding works, so if you have an idea which may help, and you understand what I'm trying to do here, please provide your .02.
Basically, it's used so the Customer's name and phone number are entered manually, and then just about everything else is automated by the use of the buttons on the right. If I could get the 2 above options to work, it'd be perfect. I just figured out I could eliminate screen flicker and hide the macros working by using:
View 12 Replies
View Related
Feb 15, 2007
I want to restrict users to just read or print a word document. Document is very confidential so we dont want them to copy or manipulate the document.
I thought of giving password to restrict to read only option but that still lets users to copy and paste on to a new document.
View 9 Replies
View Related
Sep 26, 2013
I created some excel 2003 spreadsheets to use for Fire/Police dispatchers. I have a series of yes/no option buttons that were created using the control toolbox. I have a macro that clears all the blanks where text is added, but want to add a line that clears the option buttons also.
View 14 Replies
View Related
Sep 19, 2013
I have been using this code and just noticed that it resets all of my options buttons to false when I exit and then re-enter (activate) the sheet with the option buttons.
I see where this is going on, but don't know how to correct it. I only want the option buttons changed to false if
The Sol named range is something other than "Primary Vendor". It seems to call the macro ClearOB whenener the sheet is activated.
Private Sub Worksheet_Activate()
If Range("Sol").Value = "Primary Vendor" Then
For Each OB In ActiveSheet.OptionButtons
OB.Enabled = True
Next OB
ClearOB
ActiveSheet.ScrollArea = "A1:K58"
[Code] .......
View 1 Replies
View Related
Feb 3, 2009
This Thread describes a function that I've found incredibly useful to reset the "last used cell" in a worksheet. I use this function a lot, and I would like to make a macro out of it. I have a menu-item added in my excel that runs the macro;
View 3 Replies
View Related
Aug 17, 2009
I would like to know how to use the Data filter option "contains" in a macro? I've data of over 250 rows, would like to filter on column "ORF" conatins Aftermarket or AM-2. i tried to record the macro it works but when i use the same in if statements im not getting the desired result.
View 10 Replies
View Related
Dec 30, 2008
I have a few macros that run in a sheet. After the macros are finnished I would like to present to the user a msgbox that asks if they would like to print. if "Yes" is selected, the print macro runs. If "No" is pressed then nothing happens.
View 3 Replies
View Related
