Assign Range To Variable
Dec 24, 2007
I am trying to assign a range of cells to a variable but it isn't working. My code is as follows:
Dim VarRateTable As Range
Private Sub CalcBudgets(rng As String)
' Dim VarRateTable As Range
Dim CurrentRng As Range
Set CurrentRng = Selection
Set VarRateTable = Range(rng)
Private Sub NEWCALC(datarow)
Dim vt As Double
vt = Application.WorksheetFunction.VLookup(Cells(datarow, 4).Value, VarRateTable, 3, 0)
but the Set statement gives me an error: <method 'range'of object '_global' failed>
View 2 Replies
ADVERTISEMENT
Jul 11, 2014
Why the variable DataRange won't set as below. I get Run-time error 9: subscript out of range.
Code:
Sub CreatePivotTable()
Dim DataHeaderRow As Integer
Dim DataRowCount As Integer
[Code].....
View 7 Replies
View Related
Dec 21, 2006
What I need is a macro that assigns manually selected cells/ranges (which may or may not be continious) to a Variables.
View 2 Replies
View Related
Jan 25, 2013
I have a named range, called SubjectNamesPastoral on a worksheet called Worksheets("Group to Teacher")
I can't assign the named range to the rngSubjectFamilyRangeOnSubjectUsedSheet variable in vba.
the first two lines of code work fine, the msgbox shows "E100:E105", happy days!
However when I try to assign the same range to the rngSubjectFamilyRangeOnSubjectUsedSheet variable, the debugger runs past the 'Set' line without error, but throws 'error 91' at the second msgbox.
VB:
thisString = "SubjectNames" & strSubjectFamilyOfGroup
MsgBox Range(thisString).Address
Set rngSubjectFamilyRangeOnSubjectUsedSheet = Worksheets("Group to Teacher").Range(thisString)
View 1 Replies
View Related
Jan 15, 2010
This code finds the second avaliable row from the top of the sheet.
View 3 Replies
View Related
May 19, 2009
My question is about assigning an entire array to a single variable. In this case, I want to assign an entire array to one element of another array.
View 6 Replies
View Related
May 15, 2008
how to do is the assignment of GoodArray1 to CurrentArrayToUse, i.e. "CurrentArrayToUse = GoodArray1" below:
Global NextArrayToUse()
Global CurrentArrayToUse()
Global PreviousArrayToErase()
Global GoodArray1(), GoodArray2(), [etc]
Global CurrentGuessNumber As Integer
[bunch of code, part of which assigns a number to CurrentGuessNumber, then the following...]
Select Case CurrentGuessNumber
Case 1
CurrentArrayToUse = GoodArray1
NextArrayToUse = GoodArray2
Case 2
CurrentArrayToUse = GoodArray2
NextArrayToUse = GoodArray3
PreviousArrayToErase = GoodArray1
ReDim PreviousArrayToErase(0, 0)
View 9 Replies
View Related
Aug 18, 2008
I have created a userform with 3 textboxes and I want to return the values entered to variables for use in a procedure. I cannot figure out how to return the values.
Behind the command button I am unloading the form so that the calling procedure continues executing but my vars cannot see the controls.
I have tried making them public outside of the calling sub, but nothing. Can anyone point out to me what I'm doing wrong?
View 9 Replies
View Related
Aug 23, 2008
Split from Copy, Cut, Fill Relative Or Absolute Formulas
Originally Posted by AAE
Welcome to Ozgrid.
Assume the following:
Cell A1: is the input cell
Cell B1: contains a number
Cell C1: formula = A1*B1 or $A$1*$B$1
Your formulas must contains absolute cell references, other wise Excel will attempt to update them to the new cell references when copying/pasting.
If you "cut", rather than copy, Excel will maintain the original cell references in the formula.
Both of these questions are well within the experience level of a user with above average skill level as your profile shows. Please lower it (before one of the Admins does it for you) to a more realistic level.
See this training page on how to toggle between relative/absolute cell references: [url]
Well cutting is a nifty trick, thank you for that, I don't believe you quite understood my first question.
Lets use my calculator for instance. Using something it has designated K (for no apparent reason) I can enter a formula, such as K=*2-4, and after that is entered every number I then type and press equals to it will run that formula and spit out an answer. (after entering that function, if I press "5" "equals" it will give me "6") Now what I'm wondering is if excel has a "K" function that I can assign to certain cells, namely a column, so that whenever a figure is typed in any of the cells in that column, the required operation is done, namely *.9685.
View 8 Replies
View Related
Jul 16, 2007
Back to coding in VBA after long months of Matlab, and banging my head around this simple code snippet:
Sub openfile(FilePath)
Dim myWBk As New Workbook
'Now open Form
myWbk=Workbooks.Open(FilePath)
End Sub
This returns a nasty error "Activex Component couldn't create object". It opens the file given by FilePath though. What I would like is to assign the open workbook to the myWbk variable, such that it is easier to work with.
View 2 Replies
View Related
Oct 12, 2007
Putting the final touches on a project I have and the last element doesn't work 100%. the scenario: I have a function that I wrote based on the user's input of the desired column to perform the operation. As a method of error-trapping and ease of use, I set instructions for the code to activate:
1) if the user highlights multiple cells of the desired column
2) enters the letter of the column (up to "z", not case sensitive)
3) enters the number of the column
Sub Button5_Click()
Dim ColumnUsed As Variant
' find number of columns selected
For MyColNum = 1 To Selection.Columns.Count
Cols = Cols + 1
Next MyColNum
'find number of rows selected
For MyRowNum = 1 To Selection.Rows.Count
Rows = Rows + 1
Next MyRowNum..............................
View 2 Replies
View Related
Jun 29, 2006
I'd like to assign a value located in a cell in a workbook to a variable in a VBA program in another workbook. I do NOT want to open the workbook that contains the cell with the value. I can't get the hang of referencing an external cell reference. Let's say there's a value in a cell named "nbr" in a workbook named "tst.xls" located in a path "c: est" that I want to assign to a variable "tstnbr" in a VBA program, what is the best way to code that?
View 8 Replies
View Related
Jul 23, 2006
Need exact VBA code syntax to assign a workbook (to be closed) sheet's cells J4 to J72 values to a variable called "ColJValues" to be assigned to another sheet (to be opened later in the macro). The values are all dates. Once the other workbook is opened later in the macro, need the exact syntax to assign the value in the above variable, "ColJValues", to it's cells J4 to J72.
View 8 Replies
View Related
Feb 28, 2009
I need to assign to a variable, the total number of text entries in col. A (or alternatively in a named range).
View 5 Replies
View Related
Apr 10, 2014
I have set up a number of arrays e.g. DataSetA (1 to 100), DataSetB (1 to 100) etc.
Is it possible to use a string variable (e.g. DataIndentifier) to identify and assign values to certain arrays.
For example, under certain conditions
DataIdentifier would be set to "DataSetA" and under other conditions
DataIdentifier would be set to "DataSetB".
Having done this, I want to assign values such as DataIdentifier(1) = 3.4 or DataIdentifier (10) = 6.2 etc.
This obviously won't work because DataIdentifier is defined as a string not an array. How do I enable the string DataIdentifier to be used as an identifier for the array I want to assign values to? Therefore if DataIdentifier is set to "DataSetA" then effectively I want something like "DataIdentifier(1) = 3.4" to assign 3.4 to the array DataSetA(1).
View 5 Replies
View Related
Feb 16, 2014
I am doing a Regular Expression search on a string variable assigned to the HTML content of a Wikipedia search. However I am currently manually going to Wikipedia, searching for the term, saving the html page, opening the saved page with Notepad and then copying the content into a cell.
Can the above process be automated with VBA, how to assign the html content of a Wikipedia search to a string variable.
View 1 Replies
View Related
Jan 21, 2013
I am doing an assignment about credit rating and I am trying to make a spread sheet based on Moody's credit rating method.
I have more or less finished my model, but I have one final problem; in the end I will come up with a numeric score, which can be translated into the final rating (Aaa,Aa1 etc.) based on some ranges. I just can not figure out how to formulate the formula, especially because I have no experience working with ranges.
I have tried with some IF formula's, but they seem to be way too long and complex, for what I imagine should be a relatively simple task.
In the attached sheet I have a final value of 6.9, which should give an A3 rating given that it is within the 6.5 - 7.5 range.
Test sheet.xlsx‎
View 2 Replies
View Related
Oct 24, 2008
Is it possible to assign a name to a range of cells, so that when you insert a formula into another cell you can call that range of cells into the formula?
View 5 Replies
View Related
Aug 19, 2009
I'm doing somthing basically wrong here but i'm not sure what, everything seems to work as planned except in each case where a value is assigned the value isn't actually assigned. any ideas?
The basic objective is to convert a list of numbers (1 to 3 digits) to the format "000-" i.e. all three digits with a hyphen at the end.
View 9 Replies
View Related
Oct 11, 2012
I have the following VBA code which created a unique list of values in a data column. After list is created, I want to assign it to a named range ReferTo parameter. Currently I am getting compiler error. How can I assign this unique list to a named range?
VB:
Dim UList As New Collection
Dim rCell As Range
....
If TypeName(Selection) = "Range" Then
[Code].....
View 4 Replies
View Related
Jan 25, 2009
When I insert a line to select the range on the Worksheet it does select the range named as temp. However, the array does fill but only with the first part of the range eg in this case A7:C44.
My aim is to create an array of size point1A( all the rows in the multiple ranges, 3 columns).
Example of a Range to be assigned to the Array point1A. temp = "A7:C44,D7:F44,G7:I44,K7:M44,N7:P44,Q7:S44,"
View 6 Replies
View Related
Jun 22, 2006
How do you assign a loop counter value to a range row value? Scenario: Add cells from a column that aren’t successive. SUM C10 + C17 + C24 etc
Private Sub CommandButton1_Click()
Dim total As Integer
Dim counter As Integer
For counter = 10 To 700 Step 7
total = total + Range("Ccounter")
Next counter
End Sub
View 2 Replies
View Related
Nov 10, 2006
Say you define a public range variable called Inputworksheet and you set it to refer to the worksheet called Inputworksheet. You have a separate string variable with the value Inputworksheet. How do you get this string variable value to call/control the range variable Inputworksheet?
I am getting an excel worksheet value from a lookup function that corresponds to the name of a VBA range variable. Once I have this worksheet value, I would like to use the range variable that has the same name as the worksheet value.
View 5 Replies
View Related
Dec 3, 2008
I have a simple three column range. I Autofilter the range based on one of the values in Column 1. I then want to grab the results into a range object.
I've been trying to use the Specialcells(xlcelltypevisible) route to no avail. It only gets one row when I should have many.
View 14 Replies
View Related
Dec 17, 2008
Does the line of code assign the value of cell A5 to the range or is it just a startinig point?
View 9 Replies
View Related
Jan 24, 2009
In my workbook sheet 11 has some ranges that need to have names based on cell values in sheet2 (for purposes of data validation lists).
Range S28:S46 will assume the name of sheet2A11 & sheet2A3.
(example name period_1unit_1)
Range U28:U46 will assume the name of sheet2A11 & sheet2A4.
Range W28:W46 will assume the name of sheet2A11 & sheet2A5
Right now I am calling the code when something is entered into A11.
I have tried if statement and select case, but I ran into complications with both.
I have posted both codes with the questions I have concerning those codes.
View 6 Replies
View Related
Nov 22, 2011
How to assign a range in excel using a defined (different) cell.
I've this formula
=INDEX($A$1:$A$17,RANK(B2,$B$1:$B$17))
I want to to choose the range from A1:A17 ... i'll use the formula too many times with different ranges for example A1:A21 and i want to know a way to insteed to change it manually each time to make the formula consider the value i insert in a different cell, so i can only change the value in this cell.
for example:
=INDEX($A$1:$A$D1,RANK(B2,$B$1:$B$D1)) so it can consider the value in cell D1
View 7 Replies
View Related
May 23, 2009
For example, I have the numerical value "400" in R1C2 and that value would be used in the name "D400" which is to be assigned to R1C1:R5C2.
The code I have is:
Range("R" & DRow & "C1:R" & DRow + 4 & "C2") = "D" & Cells(DRow, 2).Value
but is throwing up the error:
"Run-time error '1004':
Method 'Range' of object '_Global' failed
DRow increases dependant on other variable data.
Also, am I right to be using R1C1 instead of A1, or can the same be achieved using A1 references? If so, I think I may not be able to see the wood for the trees.
View 9 Replies
View Related
Dec 17, 2007
I have a formula that counts all instances of the letters a, b and c in a range and assigns them a value of 1 unless they are in the M column in which case a, b or c counts 4.
=SUM(COUNTIF(J2:AB2,{"a*","b","c"}),OR(LEFT(M2)={"a","b","c"})*4)
This worked well but now I need to modify the weightings across this range. My new goal is to count all instances of a,b and c in the range J2:AB2 but have M column a,b, c's = 2 and N:R column a,b,c's equalling 4. Letters other than a,b or c count as 0.
Example:
J2...K2...L2...M2...N2...O2...P2...Q2...R2...
A....B.....B.....C.....B.....D....B.....C.....E
the output of the above sequence should be
1+1+1+2+4+4+0+4+4+0 = 21
View 4 Replies
View Related
Jun 17, 2008
What I need to is create a VBA function with several parameters that reads data from an M x N range of rows and columns (matrix). I cannot just pick and choose certain cells within this range as the function goes into a loop through at least 200 cells in the 35 x 200 range. Obviously, I am here posting as I cannot get this function to work. I believe my troubles lie with reading this range into the function...
Application.Goto Reference:="range"
rangearray = Selection.Value
values(I, J) = rangearray(I + 1, J)
Do I need to set a function variable equal to that range, or do I do this another way? Basically, I need to have the ability to pick a given cell(m, n) out of the range and have my way with it in the function.
View 3 Replies
View Related
