I'm doing somthing basically wrong here but i'm not sure what, everything seems to work as planned except in each case where a value is assigned the value isn't actually assigned. any ideas?
The basic objective is to convert a list of numbers (1 to 3 digits) to the format "000-" i.e. all three digits with a hyphen at the end.
I have a simple three column range. I Autofilter the range based on one of the values in Column 1. I then want to grab the results into a range object.
I've been trying to use the Specialcells(xlcelltypevisible) route to no avail. It only gets one row when I should have many.
I have a named range, called SubjectNamesPastoral on a worksheet called Worksheets("Group to Teacher")
I can't assign the named range to the rngSubjectFamilyRangeOnSubjectUsedSheet variable in vba.
the first two lines of code work fine, the msgbox shows "E100:E105", happy days!
However when I try to assign the same range to the rngSubjectFamilyRangeOnSubjectUsedSheet variable, the debugger runs past the 'Set' line without error, but throws 'error 91' at the second msgbox.
VB:
thisString = "SubjectNames" & strSubjectFamilyOfGroup
MsgBox Range(thisString).Address
Set rngSubjectFamilyRangeOnSubjectUsedSheet = Worksheets("Group to Teacher").Range(thisString)
I am doing an assignment about credit rating and I am trying to make a spread sheet based on Moody's credit rating method.
I have more or less finished my model, but I have one final problem; in the end I will come up with a numeric score, which can be translated into the final rating (Aaa,Aa1 etc.) based on some ranges. I just can not figure out how to formulate the formula, especially because I have no experience working with ranges.
I have tried with some IF formula's, but they seem to be way too long and complex, for what I imagine should be a relatively simple task.
In the attached sheet I have a final value of 6.9, which should give an A3 rating given that it is within the 6.5 - 7.5 range.
Test sheet.xlsx‎
I'm trying to select a range that will be changing by column. I'm not sure why my syntax isn't working. What I've got:
View 2 Replies View RelatedIs it possible to assign a name to a range of cells, so that when you insert a formula into another cell you can call that range of cells into the formula?
View 5 Replies View Related Why the variable DataRange won't set as below. I get Run-time error 9: subscript out of range.
Code:
Sub CreatePivotTable()
Dim DataHeaderRow As Integer
Dim DataRowCount As Integer
[Code].....
I am trying to assign a range of cells to a variable but it isn't working. My code is as follows:
Dim VarRateTable As Range
Private Sub CalcBudgets(rng As String)
' Dim VarRateTable As Range
Dim CurrentRng As Range
Set CurrentRng = Selection
Set VarRateTable = Range(rng)
Private Sub NEWCALC(datarow)
Dim vt As Double
vt = Application.WorksheetFunction.VLookup(Cells(datarow, 4).Value, VarRateTable, 3, 0)
but the Set statement gives me an error: <method 'range'of object '_global' failed>
I have the following VBA code which created a unique list of values in a data column. After list is created, I want to assign it to a named range ReferTo parameter. Currently I am getting compiler error. How can I assign this unique list to a named range?
VB:
Dim UList As New Collection
Dim rCell As Range
....
If TypeName(Selection) = "Range" Then
[Code].....
When I insert a line to select the range on the Worksheet it does select the range named as temp. However, the array does fill but only with the first part of the range eg in this case A7:C44.
My aim is to create an array of size point1A( all the rows in the multiple ranges, 3 columns).
Example of a Range to be assigned to the Array point1A. temp = "A7:C44,D7:F44,G7:I44,K7:M44,N7:P44,Q7:S44,"
How do you assign a loop counter value to a range row value? Scenario: Add cells from a column that aren’t successive. SUM C10 + C17 + C24 etc
Private Sub CommandButton1_Click()
Dim total As Integer
Dim counter As Integer
For counter = 10 To 700 Step 7
total = total + Range("Ccounter")
Next counter
End Sub
What I need is a macro that assigns manually selected cells/ranges (which may or may not be continious) to a Variables.
View 2 Replies View RelatedDoes the line of code assign the value of cell A5 to the range or is it just a startinig point?
View 9 Replies View RelatedIn my workbook sheet 11 has some ranges that need to have names based on cell values in sheet2 (for purposes of data validation lists).
Range S28:S46 will assume the name of sheet2A11 & sheet2A3.
(example name period_1unit_1)
Range U28:U46 will assume the name of sheet2A11 & sheet2A4.
Range W28:W46 will assume the name of sheet2A11 & sheet2A5
Right now I am calling the code when something is entered into A11.
I have tried if statement and select case, but I ran into complications with both.
I have posted both codes with the questions I have concerning those codes.
How to assign a range in excel using a defined (different) cell.
I've this formula
=INDEX($A$1:$A$17,RANK(B2,$B$1:$B$17))
I want to to choose the range from A1:A17 ... i'll use the formula too many times with different ranges for example A1:A21 and i want to know a way to insteed to change it manually each time to make the formula consider the value i insert in a different cell, so i can only change the value in this cell.
for example:
=INDEX($A$1:$A$D1,RANK(B2,$B$1:$B$D1)) so it can consider the value in cell D1
For example, I have the numerical value "400" in R1C2 and that value would be used in the name "D400" which is to be assigned to R1C1:R5C2.
The code I have is:
Range("R" & DRow & "C1:R" & DRow + 4 & "C2") = "D" & Cells(DRow, 2).Value
but is throwing up the error:
"Run-time error '1004':
Method 'Range' of object '_Global' failed
DRow increases dependant on other variable data.
Also, am I right to be using R1C1 instead of A1, or can the same be achieved using A1 references? If so, I think I may not be able to see the wood for the trees.
I have a formula that counts all instances of the letters a, b and c in a range and assigns them a value of 1 unless they are in the M column in which case a, b or c counts 4.
=SUM(COUNTIF(J2:AB2,{"a*","b","c"}),OR(LEFT(M2)={"a","b","c"})*4)
This worked well but now I need to modify the weightings across this range. My new goal is to count all instances of a,b and c in the range J2:AB2 but have M column a,b, c's = 2 and N:R column a,b,c's equalling 4. Letters other than a,b or c count as 0.
Example:
J2...K2...L2...M2...N2...O2...P2...Q2...R2...
A....B.....B.....C.....B.....D....B.....C.....E
the output of the above sequence should be
1+1+1+2+4+4+0+4+4+0 = 21
What I need to is create a VBA function with several parameters that reads data from an M x N range of rows and columns (matrix). I cannot just pick and choose certain cells within this range as the function goes into a loop through at least 200 cells in the 35 x 200 range. Obviously, I am here posting as I cannot get this function to work. I believe my troubles lie with reading this range into the function...
Application.Goto Reference:="range"
rangearray = Selection.Value
values(I, J) = rangearray(I + 1, J)
Do I need to set a function variable equal to that range, or do I do this another way? Basically, I need to have the ability to pick a given cell(m, n) out of the range and have my way with it in the function.
I have had some help with this (thanks!) but am stuck.
Can someone add to the code below and make it so that multiple tasks, with multiple assignees, can be created from a range of cells, such as:
Column A Column B
Row 1Task SubjectAssign to
Row 2GV LP for AZJohn Brown
Row 3GV LP for COJohn Brown
Row 4GV LP for ILSuzy Smith
Row 5GV LP for INSuzy Smith
Row 6GV LP for KYSuzy Smith
Row 7GV LP for MNSuzy Smith
Row 8GV LP for MSBob Barker
Row 9GV LP for NCBob Barker
Row 10GV LP for NJBob Barker
Row 11GV LP for NMBob Barker
Row 12GV LP for NVBob Barker
Row 13GV LP for NYBob Barker
Row 14GV LP for OHBob Barker
Row 15GV LP for SCBob Barker
Row 16GV LP for WVBob Barker
(Sorry, it didn't translate well. The "GV LP for AZ" is cell A2, "John Brown" is cell B2.)
Here is the code I have so far:
I have a spreadsheet with several columns that have percentages as a whole number and with a decimal format. I need assign a score value to the cell that contains a percentage depending on a range.
For example:
If cell A1 has a value between 97%-100% then A2 should display "15", however if A1 has a value of 90%-96% then it should display "12" and if A1 has a value of less than 89% then it should display "0".
I've built the code for a Template form for data entry of a survey. Through Control Toolbox I've created the form and used several textboxes, option buttons, checkboxes and COMBO boxes this one in turn being my trouble.
- Sheet one is called "Data" (this is the place where all inserted information is going to be stored
- Sheet two: "Variables" (here is where I keep the required values for the como boxes - inserted manually apriorely...
Question: What is the code to assing to the combo boxes in order to have the values from the sheet "Variables" of the range A1:A4 - use the comboboxq2 for referee, I'll do the others
P.S. see the code up to now:
Private Sub CommandButtonN_Click()
Dim eRow As Long
Dim ws As Worksheet
Dim inf As WorksheetFunction
Set ws = Worksheets("Data")
Set ws = Worksheets("Variables")
' Find first empty row in database survey
eRow = ws.Cells(Rows.Count, 1).End(xlUp).Offset(1, 0).Row ................
I am trying to assign a named range to a series on a preexisting chart in a sheet, but I get the error that "unable to set values property of series class". This is the code example that DOESN'T work:
Sub assign_values()
Dim myrange As range
Set myrange = range("a1")
Set myrange = union(range("a5"),myrange)
activechart.seriescollection(1).values = myrange
End Sub
However, this code DOES work:
Sub assign_values()
activechart.seriescollection(1).values = range("a1")
End Sub
I don't see why the first wouldn't work, but the second would work. I suspect it is something to do with the union function. i am trying to go through a set of data and then group certain cells into a named range to be used on the graph.
Have the following code:
Code:
Dim Recurring_Total as Range
With .Range("A" & Rows.Count).End(xlUp).Offset(,2)
Set Recurring_Total = .Range("A" & Rows.Count).End(xlUp).Offset(,2)
.Font.Bold = True
End With
What do I replace part in red with?
How to include the workbook name in this piece of code?
Code:
sh1.Range(sh1.Cells(ii, k + 10)).Address
I have a while loop in which I'm updated information in 2 separate worksheets. I'm using the With-block statements separately to update each, but after the 30th iteration (and it's always on the 30th), the VBA code halts and get the "method 'value' of object 'range' failed" error message pointing to a line with the code as follows:
With Sheet1
.Cells(lngRow, 9).Value = intMonths
End With
where "intMonths" is an integer variable which I'm populated properly, and "lngRow" a long variable. When I debug both variables have proper data in them, and I have no idea why this is bombing.
When I try to pull some records from Oracle into Excel using ADO, I recieved this error msg:
Run-time error '-2147467259 (80004005)':
Method 'CopyFromRecordset' of object ' Range' failed
And here's the code I'm using:
Dim c As ADODB.Connection
Dim r As ADODB.Recordset
Dim sq As String
Set c = New ADODB.Connection
It's the standard ADO example used in this forum many times. Obviously there is some type of issue when the records are returned. I know that it isn't an issue with the number of records returned. It can return 30,000 fine but a few hundred may return this error. It's kinda random.
I have a range object called tbl which consists of a number of rows and columns of numbers.
I have another range object called e that is the total row just beneath tbl. I want to sum up the total of each column within tbl and put the result in the appropriate cell within e.
I can do it using a for/next loop as shown below but there could be 10,000 rows and a hundred columns in my range which woulod probably take forever. I know there must be another simple way to do it but despite racking my brains and trying various things I can't get it. I'll be very grateful for any assistance.
My current solution is as follows. (e is selected).
'Calculate totals and display them
For g = 1 To tbl.Columns.Count ' the number of columns
h = 0 ' Holds the column total
For f = 1 To tbl.Rows.Count - 1 ' The number of rows
h = h + tbl.Rows([f]).Cells(g).Value 'add the cell value
Next
e.Cells(g).Value = h ' Display the column total
Next
Sub test()
Dim rng, dest, c As Range
Dim result As String
Worksheets("sheet1").Activate
Set rng = Range([a1], [a1].End(xlDown))
Set dest = Range("d1")
result = ""
For Each c In rng
result = result & " " & c
Next
MsgBox result
dest = result
End Sub
the penultimate code statement "dest=result" does notwork the value of "result" is not entered in "dest" though no error comes up if I use "dest.value=result" it gives error "object required" If I use "range("d1")=result" it works.what is the theoretical mistake.
is it possible to write Range("A1:H6") without the string inside the range brackets? i'm trying to do is pass numerical column values into the Range function, and i'd rather not make a mess using the CHR function (CHR(65) = "A", for example).
View 2 Replies View RelatedI can't seem to figure out why this keeps giving me that error...
I've checked the row and column values inside and they seem to be ok. blank_ee() is an array of strings.