Assign Autofilter Results To A Range Object

Dec 3, 2008

I have a simple three column range. I Autofilter the range based on one of the values in Column 1. I then want to grab the results into a range object.

I've been trying to use the Specialcells(xlcelltypevisible) route to no avail. It only gets one row when I should have many.

View 14 Replies


ADVERTISEMENT

Assign Value To Range Object

Aug 19, 2009

I'm doing somthing basically wrong here but i'm not sure what, everything seems to work as planned except in each case where a value is assigned the value isn't actually assigned. any ideas?

The basic objective is to convert a list of numbers (1 to 3 digits) to the format "000-" i.e. all three digits with a hyphen at the end.

View 9 Replies View Related

VBA Autofilter Not Returning Results?

Jul 6, 2013

I have a large table which I am filtering 3 times. There should be results but the final VBA filter does not return them until I manually apply the filter. The custom filter is correctly populated with the criteria. The code that I am using is as follows:

VB:
Cells.Select
Selection.AutoFilter
Selection.AutoFilter Field:=9, Criteria1:="<>", Operator:=xlAnd
Selection.AutoFilter Field:=10, Criteria1:="=INV", Operator:=xlOr, Criteria2:="=CRD"
Selection.AutoFilter Field:=21, Criteria1:=">=" & DTPicker1.Value, Operator:=xlAnd

The first two filters work fine. The last does not. Oddly it works on some date picker values and not others, even if there are actual results and as mentioned earlier if I stop the program running and apply the filter (without typing anything else) it works fine.

View 5 Replies View Related

Use Combo Box Results For AutoFilter

Dec 21, 2005

I want to use the selection from a combobox on a sheet to set the autofilter. I know it is probably very simple but have not been able to find the answer by searching this forum. Below is the code I am using. It sets the filter to blanks for some reason.

Private Sub ComboBox2_Change()

Range("D9").AutoFilter Field:=1, Criteria1:=ComboBox2.Value, visibledropdown:=False

End Sub

View 9 Replies View Related

Total AutoFilter Results

Dec 30, 2006

I have a worksheet of data that I have created by combining several other workbooks into one using a macro. On this worksheet I run AutoFilter to select certain rows and then copy these rows to another worksheet, again using a macro. How can I get the macro to generate a total for one of the columns? I would like the Sum to be two rows after the end of the column with some kind of descriptor preceeding it.

View 6 Replies View Related

Calculate Autofilter Results

Feb 19, 2008

I have a list of data in Excel with Autofilters. At the bottom of the data set is a row that totals up many of the columns. Whenever I use the Autofilters, the totals at the bottom still reflect the entire set of data, rather than only the filtered data.

Is there a way (using macros, formulas, or something else) to make the totals automatically update to only reflect the data that is visible when using Autofilters?

View 6 Replies View Related

AutoFilter Method Of Range Class Failed - Yet Autofilter Works.

Sep 25, 2009

Im sure this is a very common problem. I tried searching for it but I havent found anything that solves this for me. Here is the code Im using:

View 3 Replies View Related

Use ComboBox For Changing Autofilter Results

Apr 9, 2013

I have a problem very similar to this thread: [URL] .... Therefore I have tried to adapt but so far failed.

My requirement is that a userform pops up with multiple comboboxes (in this scenario 3) and once the results have been selected and the user clicks the button "OK" then the autofilter changes to the same as what the selected ComboBoxes were.

So, there are 3 comboboxes so I have tried the following:

VB:
[PrivateSub CommandButton1_Click()

Worksheets("Data").Activate
If Sheets("Data").AutoFilterMode = True Then Range("B3", Range("B600").End(xlUp)).AutoFilter
Range("B3", Range("B600").End(xlUp)).AutoFilter Field:=1, Criteria1:=ComboBox1.Value, visibledropdown:=False

[Code] .....

View 5 Replies View Related

Search Box That Uses Autofilter To Filter Results Down?

May 14, 2012

I want to create a searchbox in Excel which will locate text in a massive amount of data, for example, if a user types into the box....

"123"

I want the search box to filter the spreadsheet using the autofilter from cell B3, thus filtering out all results that are NOT "123".

Currently I have a button to press which brings up the CTRL + F screen, but that isn't exactly what is required in this instance.

View 6 Replies View Related

Vba Autofilter Msgbox If No Results Returned

Nov 2, 2008

I want a msgbox to popup if the autofilter returns no records saying "No records found".

Heres a sample of the
Sub cmbFindAll_Click()
Dim strFind As String 'what to find
Dim rfilter As Range 'range to search
Set rfilter = Sheet1.Range("a2", Range("f65536").End(xlUp))
Set rng = Sheet1.Range("a2", Range("a65536").End(xlUp))
strFind = Me.TextBox1.Value
With Sheet1
If Not .AutoFilterMode Then .Range("A2").AutoFilter
rfilter.AutoFilter Field:=1, Criteria1:=strFind & "*"..........

View 9 Replies View Related

Copying Results From An Autofilter To A New Worksheet

Aug 27, 2009

I'm working on a quote template that has 600+ products with descriptions and prices that gets autofiltered down to one product. After it has been filtered down to that one product how do I link that to a new worksheet?

View 9 Replies View Related

AutoFilter Table & Copy Results

Jan 29, 2008

The error above comes up every time I copy filtered data to a new worksheet. It does its work but the said error comes up.

Sub AUTOFILTER_withouthead()

' AUTOFILTER_for_drop Macro
' Macro recorded 1/27/2008 by DD
Dim ws As Worksheet, wd As Variant
Set ws = Worksheets((Worksheets("Destination"). Cells(1, 6).Value))
Set wd = Worksheets("Destination").Range("A1:F65000") ...

View 3 Replies View Related

Copy And Paste Autofilter Results To Different Sheet?

Jul 1, 2013

I have a sheet that I need to routinely filter for a specific code then paste it into a different sheet in the same workbook. I would love to set up a simple macro that would do this for me, but I can't seem to figure it out.

In the results I would like the header row if at all possible, but I can always just make it part of the macro.

View 2 Replies View Related

AutoFilter Copy Code Producing No Results

Aug 9, 2007

I have created a macro some time ago that is an integrated part of an XLA. The Xla has worked fine but now, for some reason, the macro fails to import the specified text, it doesn't fail but nothing gets imported. I have tried solving this myself, but alas I am not bright enough

The code is:

Sub GetWorksheet()
Dim filetoopen As String
Dim wb As Workbook

filetoopen = Application _
. GetOpenFilename("XL Files (*.xls), *.xls")
On Error Resume Next

View 5 Replies View Related

Use AutoFilter To Filter And Copy Results To Existing Worksheet

Apr 5, 2013

I got the following code from Use AutoFilter to filter and copy the results to a existing worksheet and would like to incorporate this into my VBA project. The problem however is that this code were written to perform on one workbook and this is where my problem is. My project is between two different workbooks and cannot seem to get this code modified to do what it is supposed to do between these two workbooks. Everything I have tried so far failed. In short what this code would do is to check the existing data on the one sheet (the source) and extract only the data which is meeting my set criteria, and copy this data to the destination sheet. This is what I would like to do between two workbooks. With this the sample code as provided by Ron de Bruin. The sample workbook could be accessed trough the following link [URL]..... With this the code for matching and copying on one workbook.

Code:
Option Explicit
'>>
'This example will copy the filter results below the existing data on the destination sheet.
'Note the sheet "RecordsOfTheNetherlands" must exist in your workbook.
'This example will not copy the header row each time so when you manual add the worksheet
'"RecordsOfTheNetherlands" to your workbook you must add the headers yourself on the first row.

[Code] ............

View 1 Replies View Related

Deleting Hidden Rows Based On Results Of Autofilter

May 23, 2007

I am performing an autofilter within a spreadsheet to display only those lines where a name exists in column A. Then I delete all hidden rows. I am having a problem when the autofilter results in no rows being visible. Here is the code I am using for the delete hidden rows:

On Error Resume Next ' In case there's no hidden cells

With Cells
Set rngHidden = .SpecialCells(xlCellTypeVisible)
.EntireRow.Hidden = False 'Unhide all cells
rngHidden.EntireRow.Hidden = True 'Hide previously visible cells
.SpecialCells(xlCellTypeVisible).EntireRow.Delete 'Delete previously hidden cells
rngHidden.EntireRow.Hidden = False ' Unhide previously visible cells
End With
End Sub

View 9 Replies View Related

Assign Named Range To A Vba Range Variable?

Jan 25, 2013

I have a named range, called SubjectNamesPastoral on a worksheet called Worksheets("Group to Teacher")

I can't assign the named range to the rngSubjectFamilyRangeOnSubjectUsedSheet variable in vba.

the first two lines of code work fine, the msgbox shows "E100:E105", happy days!

However when I try to assign the same range to the rngSubjectFamilyRangeOnSubjectUsedSheet variable, the debugger runs past the 'Set' line without error, but throws 'error 91' at the second msgbox.

VB:
thisString = "SubjectNames" & strSubjectFamilyOfGroup

MsgBox Range(thisString).Address

Set rngSubjectFamilyRangeOnSubjectUsedSheet = Worksheets("Group to Teacher").Range(thisString)

View 1 Replies View Related

Assign Value Given Another Value In Range

Jan 21, 2013

I am doing an assignment about credit rating and I am trying to make a spread sheet based on Moody's credit rating method.

I have more or less finished my model, but I have one final problem; in the end I will come up with a numeric score, which can be translated into the final rating (Aaa,Aa1 etc.) based on some ranges. I just can not figure out how to formulate the formula, especially because I have no experience working with ranges.

I have tried with some IF formula's, but they seem to be way too long and complex, for what I imagine should be a relatively simple task.

In the attached sheet I have a final value of 6.9, which should give an A3 rating given that it is within the 6.5 - 7.5 range.

Test sheet.xlsx‎

View 2 Replies View Related

Select A Range That Will Be Changing By Column: Method 'Range' Of Object '_worksheet' Failed

Jan 6, 2010

I'm trying to select a range that will be changing by column. I'm not sure why my syntax isn't working. What I've got:

View 2 Replies View Related

Assign A Name To A Range Of Cells

Oct 24, 2008

Is it possible to assign a name to a range of cells, so that when you insert a formula into another cell you can call that range of cells into the formula?

View 5 Replies View Related

Assign Range To Variable?

Jul 11, 2014

Why the variable DataRange won't set as below. I get Run-time error 9: subscript out of range.

Code:
Sub CreatePivotTable()
Dim DataHeaderRow As Integer
Dim DataRowCount As Integer

[Code].....

View 7 Replies View Related

Assign Range To Variable

Dec 24, 2007

I am trying to assign a range of cells to a variable but it isn't working. My code is as follows:

Dim VarRateTable As Range

Private Sub CalcBudgets(rng As String)
' Dim VarRateTable As Range
Dim CurrentRng As Range
Set CurrentRng = Selection
Set VarRateTable = Range(rng)

Private Sub NEWCALC(datarow)
Dim vt As Double

vt = Application.WorksheetFunction.VLookup(Cells(datarow, 4).Value, VarRateTable, 3, 0)

but the Set statement gives me an error: <method 'range'of object '_global' failed>

View 2 Replies View Related

How To Assign List To Named Range

Oct 11, 2012

I have the following VBA code which created a unique list of values in a data column. After list is created, I want to assign it to a named range ReferTo parameter. Currently I am getting compiler error. How can I assign this unique list to a named range?

VB:
Dim UList As New Collection
Dim rCell As Range
....
If TypeName(Selection) = "Range" Then

[Code].....

View 4 Replies View Related

Assign A Non Contiguous Range To An Array

Jan 25, 2009

When I insert a line to select the range on the Worksheet it does select the range named as temp. However, the array does fill but only with the first part of the range eg in this case A7:C44.

My aim is to create an array of size point1A( all the rows in the multiple ranges, 3 columns).

Example of a Range to be assigned to the Array point1A. temp = "A7:C44,D7:F44,G7:I44,K7:M44,N7:P44,Q7:S44,"

View 6 Replies View Related

Assign Loop Counter To Range Row

Jun 22, 2006

How do you assign a loop counter value to a range row value? Scenario: Add cells from a column that aren’t successive. SUM C10 + C17 + C24 etc

Private Sub CommandButton1_Click()
Dim total As Integer
Dim counter As Integer
For counter = 10 To 700 Step 7
total = total + Range("Ccounter")
Next counter
End Sub

View 2 Replies View Related

Assign Variable To Selected Range

Dec 21, 2006

What I need is a macro that assigns manually selected cells/ranges (which may or may not be continious) to a Variables.

View 2 Replies View Related

Does The Line Of Code Assign The Value Of Cell A5 To The Range

Dec 17, 2008

Does the line of code assign the value of cell A5 to the range or is it just a startinig point?

View 9 Replies View Related

Assign Range Name Based On Cell Values

Jan 24, 2009

In my workbook sheet 11 has some ranges that need to have names based on cell values in sheet2 (for purposes of data validation lists).

Range S28:S46 will assume the name of sheet2A11 & sheet2A3.
(example name period_1unit_1)

Range U28:U46 will assume the name of sheet2A11 & sheet2A4.

Range W28:W46 will assume the name of sheet2A11 & sheet2A5

Right now I am calling the code when something is entered into A11.

I have tried if statement and select case, but I ran into complications with both.

I have posted both codes with the questions I have concerning those codes.

View 6 Replies View Related

How To Assign Range Using Defined Cell In Excel

Nov 22, 2011

How to assign a range in excel using a defined (different) cell.

I've this formula
=INDEX($A$1:$A$17,RANK(B2,$B$1:$B$17))

I want to to choose the range from A1:A17 ... i'll use the formula too many times with different ranges for example A1:A21 and i want to know a way to insteed to change it manually each time to make the formula consider the value i insert in a different cell, so i can only change the value in this cell.

for example:

=INDEX($A$1:$A$D1,RANK(B2,$B$1:$B$D1)) so it can consider the value in cell D1

View 7 Replies View Related

Assign Name To Range Using Variables And Cell Values

May 23, 2009

For example, I have the numerical value "400" in R1C2 and that value would be used in the name "D400" which is to be assigned to R1C1:R5C2.

The code I have is:

Range("R" & DRow & "C1:R" & DRow + 4 & "C2") = "D" & Cells(DRow, 2).Value

but is throwing up the error:

"Run-time error '1004':
Method 'Range' of object '_Global' failed

DRow increases dependant on other variable data.

Also, am I right to be using R1C1 instead of A1, or can the same be achieved using A1 references? If so, I think I may not be able to see the wood for the trees.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved