Auto Advance Cursor
Mar 8, 2007
Excel Sheet Description:
My Excel sheet is a check list inventory and is arranged in three, two column matrix.
The cells are expecting an integer rating (1-5).
Problem Description:
What I would like to do is enter my integer rating in a cell in a column and then automatically have the cell selection advance once to the right and then down to the next row until all the cells have been filled with there integer ratings.
I would like to do this without having to hit the enter or tab key.
View 8 Replies
ADVERTISEMENT
Feb 24, 2004
Is there a way to make excel advance to next lowest cell automatically once a number of a specifed length (e.g. single digit integers in my case) is entered in a cell? I have large volumes of data to enter--usually integers from 0 to 9--and the extra "enter" keystroke becomes very tedious and increases errors.
View 9 Replies
View Related
Jan 14, 2012
How do i auto advance a text box in a user form to the next question. As long as that question was answered otherwise it doesn't advance and displays a msgbox telling them that something must be entered in that box? All done in vba.
View 2 Replies
View Related
Oct 27, 2009
I've exhausted my search engine skills and I'm about 99.9% sure Excel is incapable. This message board has been great over the years of figuring out even the trickiest of problems, but is there any functionality in 2003 or the slight possibility that after a user inputs a number in a cell (no tab, no enter) that it will move to the next cell.
After reading about this, most people say it is not possible even with VBA or Macro, and I certainly believe it, but the whiny, and horrible department that I work for are curious if this is possible. So, is it? If this is the wrong area for this questions, I apologize, I was considering putting this in the Macro/VBA area, but I gave up in deciding where to post this.
View 2 Replies
View Related
Sep 17, 2009
I am working with a VBA userform and several textbox's, setting SetFocus and or TabIndex doesn't leave the box ready to accept input and there is no cursor shown to indicate it is ready to accept input.
View 2 Replies
View Related
Nov 6, 2008
starting on A5, I have to entered 10 digits code. I would like to put a VBA code that after I entered the 10th digit it will jump down automatically to next column (A6) without hitting the ENTER key..and so on...
Then once I click on Save button, it will save it as a CSV file based on what I put in A1. ie: if I put in zzz on A1 it will save it as zzz.csv (pure csv).
View 14 Replies
View Related
Oct 16, 2009
Here is a copy of my code and I am Having a problem trying to get it to filter zero balances out. There are positive and negative numbers and I need to post them to a seperate sheet and exclude all zeros.
View 7 Replies
View Related
Nov 26, 2009
I'm trying to mark up in advance the dates where i'll get paid. I get paid monthly on the 2nd last working weekday of the month. So because we have the 30/11/2009 falling on Monday of next week, my pay day for this month is Friday 28/11/2009.in December it should be the 30/12/2009.
I'm getting all tied up in Networkdays, EOm and weekday function!
View 9 Replies
View Related
Jul 13, 2006
Is it possible to use an array without looping through it? I have code that has two loops: One that is just for the array and the other that loops through the data. It would be nice if I could get it down to one loop, but I'm not sure if it's possible. For example, if you have
Dim varArea As Variant
varArea = Array(1,2,4,6,8,12)
For x = LBound(varArea) To UBound(VarArea)
Do While Not C Is Nothing
Code here
Is there a way to advance to the next item in the array without using the loop.
View 10 Replies
View Related
Jan 4, 2007
I just came across an error in one of my workbooks where I had duplicate headers on a few columns
So When I used AdvancedFilter to " cut" the data into several workbooks for end users, the data in the first column was pasted 2x and the second columns was ignored altogether.
Headers since changed and that fixed the problem.
I'm just curious why the second column was ignored altogether
View 4 Replies
View Related
Jun 15, 2007
I have a excel sheet auto generated by a process in which there are 4 columns and 150 Rows. One column has dates data in DD-MMM-YYYY (15-May-2007) format..but the datatype of that cell is not Date. When I click on any date let say I selected 24-Mar-2007 in formula bar instead of displaying 3/24/2007 it displays as it is 24-Mar-2007.
But when i double click on this cell it shift to right alignment and display date format 3/24/2007 in formula bar. I have to create a formula using which I can see only some rows of define date range. Means if i define range in two cells 01-Jan-2007 and 01-Jun-2007. The sheet will display only rows having this criteria. But due to this datatype problem before putting the criteria I have to double click each of the row to convert it to Date. RightClick Format cells option is also not help full in this.
View 2 Replies
View Related
Sep 25, 2008
I'm trying to use the advance filter for multiple criteria in one column. It works fine if the criteria is ="*10*" (ie where the cell in the range has 10 in the string) plus other = criteria. What I cannot get to work is where the range doesn't equal 10 in the string. I've tried ="<>*10*" and other variations to no joy.
View 4 Replies
View Related
Dec 1, 2008
This is a sort-of bizarre query I have.
I have a large array of data which I'm filtering out and copying to a new spreadsheet using an advanced filter. I have 2 filter criteria, one works... the other doesn't.
The second criteria is supposed to filter out rows that have blank cells in column C or D. I tried various things:
a. at first I tried following:
Column header: Name |Surname
Criteria: <>"" |<>""
b. since it didn't work I tried that
Column header: Name |Surname
Criteria: =<>""""" |=<>"""""
I also tried <>0 and <>null with absolutely no joy.
c. once I figured out that doesn't work either, I tried:
Column header: (empty)
Criteria: =OR(NOT(ISBLANK(C2)),NOT(ISBLANK(D2)))
now, the last one did have some effect, most of the empty-celled rows have been filtered out. However the filter persistently picks up ONE row that has blanks in column C2 and D2. I checked the data to check if the cell is really blank and it's as blank as it gets.
Obviously, I need help. It's been 3 days and I still can't figure out what's wrong with my filter. Is there a way of fool proofing the criteria, so that it will filter out all cells that are or appear to blank?
View 10 Replies
View Related
Dec 6, 2006
I'm having an issue where advnace filter isnt working and I need to get all of the unique entries.
I don't know if this has anything to do with it but I got some erros saying the numbers were being pu as text so I changed the cell tpe to a custom with 00000000 because the unique number I need to filter is 10 digits long.
As another alternative I would paypal some one a few bux if they can help me just compare two lists and make a report with the number of netries that show up in one list and not the other and vice versa.
View 9 Replies
View Related
Apr 13, 2008
I have many large arrays of climate data. I am trying to find an array criteria formula that would filter out those years from a variation around a given year. Like this example, to filter out those years B10 (47.8) plus or minus B12 (3.339).
AB
1YEARTEMP
21870 44.78
3187143.33
4187240.99
5187339.43
6187440.94
7187537.33
8187642.23
9187745.68
10187948.18
11
12Stdev3.339
View 9 Replies
View Related
Sep 15, 2008
I need to filter out data which displays only a few categories of information at the same time in the same column. For example, column A: David, Susan and William. After filtering the data, it will show David, Susan and william information. I have tried custom filter, but it only allows 2 conditions. I need to show more than 2 conditions of data. I have tried working out using office assistant guide on Multiple Criteria in one column to no avail. Only shows a single cell.
View 9 Replies
View Related
Dec 4, 2008
I bring in data with these same columns A thru J. I do not know how many rows will be comming in. I have create a macro that uses the advanced filter. I have a criteria range set up on sheet 2 with 6 variables, the main data is on sheet 1. This works fine if I use all 6 variables. I wish I could select from a list box which of the 6 or all variables I need(I might select 2,3 or more variables), & have that information populate the criteria range. I only filter in place(no copying), there is only filtering on column B, the label for the criteria range will always be "Name" it will be located on sheet 2 D:1. Is this possible or should I be trying some other function? Here is the macro that uses all 6 criteria. I have searched and could not find what I was looking for.
'add criteria range
Sheets("Sheet2").Select
Range("D1").Select
ActiveCell.FormulaR1C1 = "Name"
Range("D2").Select
ActiveCell.FormulaR1C1 = "e11*"
Range("D3").Select
ActiveCell.FormulaR1C1 = "e12*"
Range("D4").Select.........
View 9 Replies
View Related
Aug 22, 2006
I have a folder which has 200 files. I have extracted data from these files based on autofilter criteria. But there are many duplicate records extracted for the criteria. I need only unique records . Below are the codes. Where to I add the criteria for search records:
Sub ExampleSearch()
'Note: This example use the function LastRow
Dim basebook As Workbook
Dim mybook As Workbook
Dim rng As Range
Dim rnum As Long
Dim mnum As Range
Dim FNames As String
Dim MyPath As String
Dim SaveDriveDir As String
View 8 Replies
View Related
Aug 29, 2007
I recorded a macro to perform an Advanced Filter. I then adapted the range to & LastRow. My question is, can this now be adapted to remove the Select so the sheets are not selected when this is run.
Sheets("CIT Results").Select
Sheets("Open Calls").Range("A1:I" & LastRow).AdvancedFilter Action:=xlFilterCopy, _
CriteriaRange:=Sheets("Open Calls").Range("N5:V8"), CopyToRange:=Range("Q50"), Unique:=False
Moderators, can you please edit the Thread title. It should be "Advance Filter From and To Non Active Sheet"
View 6 Replies
View Related
Feb 11, 2008
Is it possible to use an advance filter to detect blank cells? Or can the criteria be set to detect all cells that don't contain a letter e.g. "Y"?
View 3 Replies
View Related
Jul 7, 2009
How do you remove entries from a column such that only unique entires are left?
Say the spreadsheet contains only a single column:
david
kris
tony
hayley
kristy
john
david
test
hello
david
I tried an "advanced filter" with "unique records only" checked. It gets rid of one david, but not 2 (there are originally 3 of them, and we want to leave 1)
This is the result.
david
kris
tony
hayley
kristy
john
david
test
hello
View 9 Replies
View Related
Jul 13, 2009
Part of the assesment task is to write a formula, to work out how many days in advance the customer paid, and then apply the needed discount. I have tried several basica variations to the formula, and keep getting the same Err message.
give point me in the right direction to how i can calculate amount of days paid in advance and apply a % discount?
attached is the start of the assesment question.
You should create and enter formulas to calculate the No. of Days paid in Advance, the Discount and the Course Fee Paid.
Use a VLOOKUP function in your template to determine the discount rate to be used for the calculation of the Discount. Your template should include a separate discount table containing the following information about the discount received:
• If students pay the course fee less than 7 days prior to the course commencing then they receive no discount.
• If students pay the course fee 7 to 13 days prior to the course commencing then they receive a discount of 5%.
• If students pay the course fee 14 to 20 days prior to the course commencing then they receive a discount of 8%.
• If students pay the course fee 21 days or more prior to the course commencing then they receive a discount of 10%.
View 6 Replies
View Related
Mar 3, 2008
I'm talking about the little black box that appears anytime you put the mouse on a cell, or drag the mouse around a group of cells - mine doesn't show up. I can still edit the cell, but I have to guess about which cell I am on.
how to make my dear cursor reappear?
View 1 Replies
View Related
Dec 18, 2008
I try to move the cursor using the keyboard arrows it stays on the cell it is on and the whole spreadsheet page moves across the screen in the direction of the arrow. So how do I restore cursor movement to the arrows.
View 3 Replies
View Related
Sep 9, 2009
How do I make the cursor jump down to the next row. Example: once I entered value on H2, I would like the cursor jump down to A3 then once I reach H3, the cursor would jump down to A4 and so on.
View 5 Replies
View Related
Dec 16, 2011
For many projects I work on I use listviews in forms, this time I thought I'd try something different.
I've created a scrollable frame with dynamically added controls and have started creating their events in a class module.
Here is the problem I now face. If I create for example a label at design time I can click on the MouseIcon property and navigate to the "hand.cur" file I have.When dynamically creating the label control I have been able to reference to the file by using:
Code:
.MouseIcon = LoadPicture(ThisWorkbook.Path & "hand.cur")
What I've now done is embed the file on a worksheet, but hat the correct syntax is to refer to it. I've come up with the following but it doesn't work:
Code:
.MouseIcon = LoadPicture(ThisWorkbook.Sheets("Objects").OLEObjects("Object 1"))
Am I on the right lines or am I completely off the mark.
View 5 Replies
View Related
Jun 5, 2002
I received this code from the board about a month ago. It works perfectly to highlight the row the cursor is currently in but, has one flaw. Once you place this code in the sheet module and the code initiates, it will "erase all other highlight colors" within your sheet. Is there a way to correct this problem?
Here is the code;
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Cells.Interior.ColorIndex = xlNone
With Target.EntireRow.Interior
.ColorIndex = 37
.Pattern = xlGray25
.PatternColorIndex = 24
End With
End Sub
View 9 Replies
View Related
Feb 11, 2009
how I can move the cursor position on all visible worksheets to A1 before a workbook is saved.
View 9 Replies
View Related
May 10, 2007
I am wanting VBA language in a macro that will move the cursor a certain number of cells in a certain direction. For example, I want the cursor to move right one cell, no PARTICULAR cell, just right one cell. Is there something I can use?
View 6 Replies
View Related
Jan 8, 2009
Usually when I select a number of cells with my cursor excel adds up the cells and shows a total on the bar. It's stopped doing this now and will only show the 1st cell showing "max=No"
View 3 Replies
View Related
