I have an excel workbook with two sheets:
1. Data.
2. TR.
Once the choices are made (dropdown lists) and the button is clicked, TR sheet is filled. I need a macro that would drag the cells of E4,J4,O4,T4. To the cell beneath them, once data is filled in either C or D, H or I, M or N, R or S. The dragging of the cells will display the results (column E,J,O,T), thus, totals will appear in the CONS sheet.
When I enter a number into a cell, and then drag down in the column to auto fill the cells below, the number increases. I want to be able to drag without the number increasing in increment.
View 13 Replies View RelatedHow do you drag down a column to auto complete the values but do it so it only changes one variable.For example, I am dragging down =IF(ROW()<=$B$5,MOD(E2*B1,B2),"") down my column.
However, I only want the "E2" value to change, and I want B1 and B2 to stay that way. Whenever I drag down, it keeps changing all three values. Is there a way to make it just so that the E2 value is the only one that changes?
Formula that will repeat a cell number as it drags down and as soon as the number changes. I am using helper column that shows the cell number. I need to drag this down about 1000 rows.
Excel 2010
A
B
C
1
Helper Column
Desired Result
[Code].....
I have a master workbook that I reference data from hundreds of excels on.
I am trying to reference the cell "BU7" that has the workbook name (NT-13-001) in it, to reference sheet name "Purchase Order" at cell "H13".
Next line I would like to reference the cell "BU8" that has the workbook name (NT-13-002) in it, to reference sheet name "Purchase Order" at cell "H13".
The computer path is K:FRG TOOL REQ2013NT FormsNT-13-001
This is the formula I have tried... I have also attempted the INDIRECT function & Hyperlink GO TO.
=IFERROR('K:FRG TOOL REQ2013NT Forms["&DU7&".xlsx]Purchase Order'!$H$13,"")
I have a spreadsheet that will eventually consist of tens of thousands of rows. Several columns contain formula's. Rather than having to "highlight" a cell and then "drag" all the way down the column over thousands of rows before finally using the "fill down" function I am needing a method to short cut this process?
Is there a function that allows you to, say, nominate a range of cells that you can fill down over? For example, starting from the last row with data entered into it down to say row 12500 i.e. D22:D12500.
Let's say I have a value in B2, and a formula in C2. If I drag the formula from C2 all the way down to C20 (spreading it 18 times), the formula wants the value in B2, B3, B4, etc.. down to B20. How do I drag a formula, but have it always reference B2?
View 1 Replies View RelatedI have problem with inputbox which I can not select the cell by dragging the mouse. Means user have to enter manually the range into the textbox. At below i attached the code and picture of inputbox dialog box.
i am using MS office 2003.
Set GetRange = Excel.Application.InputBox(Prompt:="Select a range:", Title:="Tes", Type:=8)
I am using the formula below to sum across several worksheets, and the formula I am using works fine, but when I copy the formula across to other cells, I can't figure out how to have it update my cell range:
=SUMPRODUCT(SUMIF(INDIRECT("'"&$A$1:$A$4&"'!A:A"),$B4,INDIRECT("'"&$A$1:$A$4&"'!G:G")))
The range A:A is ok to be static, but I need the G:G to be dynamic so when I drag it to the right it will change from G:G to H:H. I:I, etc.
I have a workbook with multiple sheets interacting with one another. On one of them the user is prompted to make lists of expenses in multiple columns. The column labels are in row one, and row two has the sums of all the cells below. I have every sheet in the workbook protected, so that only the cells that need to be modified are unlocked. The problem is that the user can drag cells around and change the range of the functions in row two (locked cells).
For example, A2 has the function =sum(A3:A100). But if the user drags the values in A3:A5 to A6:A8, the formula in A2 changes to =sum(A6:A100). Is there anyway that I can allow the user to drag cells (this could be a useful feature), but keep the formulas in the second row fixed?
When I'm in edit mode (in other words, when I double click on a cell to, say, make a reference to another cell), it still displays the colours of the cells that they're referring to. However, it only shows a simple outline but cannot move it by mouse. I should be able to see small squares in each corner of the cell so I can either move it or enlarge/shrink the cell reference. how to re-enable this feature. I like it because I need to be able to SEE the cells better
View 2 Replies View RelatedI can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies View Relatedi have a sheet with alot of data, its a contacts list. colum A is Company name, B contact name, C address, D postcode. One row = one contact. On the next sheet i want to have on column with each contact set out as if it wer on an envelope, so i did the formula:............
if i select all of this space and try to drap the formula down the next cell fills with =sheet1!A11......I want it to say =sheet1!A3. If i cant drag it down then I am going to have to manually write this formula 100000000000 times.....anyoning.
How Do You Drag This Formula Down A Column & Make It Progress And Still Have $'s
This:
=$a$1
=$a$2
Not This
=$a$1
=$a$1
I Dont Want To Have To Drag The Formula And Then Manually Put In The $'s
In row 3 I have values horizontally. (A3 to Z3)
i link C5 to A3.
If I drag it vertically it does not give the correct values.
Is it possible to drag it in a correct way?
I tried =INDEX($A$3:$X$3,ROWS($A$3:$A3))
I have the following forumlas in consecutive Rows on Tab#2 of my file:
Row 1: =(Tab#1!B12 + Tab#1!B13)
Row 2: =(Tab#1!B24 + Tab#1!B25)
Row 3: =(Tab#1!B36 + Tab#1!B37)
Is there any way to drag this formula down the rows below it so that each time it continues this pattern. Just to be clear the pattern is that each time you drag down a row it goes 12 rows in the formula.
How can I have it so the column (letter) changes in succession rather than the row (number)? Here is my formula :
=SUMPRODUCT(('Web Queries Reference'!A$2:A$600<>-1)*('Web Queries Reference'!A$2:A$600))-0.01
I would like it to be this once I drag the cell formula down to the next row :
=SUMPRODUCT(('Web Queries Reference'!B$2:B$600<>-1)*('Web Queries Reference'!B$2:B$600))-0.01
In one sheet i have a table with 154450 lines from a software output converted in a table , in another sheet i made a table to 'sanitize' and make 'human-readable' the first one referring to some of the cells.
It works fine but, i have to drag the last line to repeat the formula and, as you can imagine, hard to think i will drag for 154450 lines ^^.
I have found an inconsistency in different PCs with respect to the method of producing incrementation when dragging a grab handle to an adjacent cell. In some PCs just dragging produces the effect, in others a key has to be held down during the drag. I'm sure there are detailed instructions about such a setting, but I have been unable to find them.
View 9 Replies View RelatedIs there a way to protect a sheet from a user dragging a cell?
View 6 Replies View RelatedI'm looking to easily drag the sum of certain cells in a different column BUT keeping a specific range, it's hard to explain so i'll show an example...
A1
A2
A3
A4
A5
A6
A7
A8
B1=SUM(A1:A4)
B2=SUM(A4:A7)
B3=SUM(A8:A11)
And so on...
Is there any way I can do this by dragging down the cell formula from B1 and it remembering the range of 4, so I don't have to manually select each range...?
Here's my Formula:
Range("H2:S2").Select
Selection.AutoFill Destination:=Range("H2:S2702"), Type:=xlFillDefault
Range("H2:S2702").Select
This is dragging the formula to the end of the report. My dilemma is that this was captured with the macro recorder. Is there a way to change "S2702" with whatever row Column S ends with? Meaning this formula will be used on different sized reports so the numbers will vary. I just need a direct statement to compensate however large the report is.
I have obviously hit a combination of keys that has turned this function off. I can no longer drag and fill cells with a formula, it will only copy the original text/value into adjacent cells. How can I fix this??
View 9 Replies View RelatedI need to check the result of the difference between 2 cells in the same column. But It needs to be done with an increment of 2 e.g. A2-A1 then A4-A3 and so on.
View 5 Replies View RelatedI have 2 sheets in my excel document. The first sheet (sheet1) has student data (grade they got on a test) from C5:C35 all in 1 column. On the 'second' sheet (sheet3), I have made a profile for each student (there are 30 of them, spread out 1 per printable page). I want to take Sheet1!C5 result and put it in sheet3!D7. The formula in sheet3!D7 would just be =sheet1!C5. I want to 'drag' that formula to L7, then to T7 then to AB7 etc etc (they are all 8 columns apart), obviously not affecting any of the cells between them.
There are 12 pieces of data in sheet1 that I want to auto update in sheet3, for 30 students, so copy pasting, and adjusting the formula would take a long time.
How figure out how to drag down a formula that looks like this for the first three cells (C3:C5)?
=(SUMPRODUCT(Polls!D2:D5,Polls!B2:B5))/(SUM(Polls!B2:B5))
=(SUMPRODUCT(Polls!D8:D11,Polls!B8:B11))/(SUM(Polls!B8:B11))
=(SUMPRODUCT(Polls!D14:D17,Polls!B14:B17))/(SUM(Polls!B14:B17))
...etc.
Is there a way to let Excel know that I'm adding six to each cell, rather than it automatically adding one?
Im using the following formula to update our prices in our stock list.
=VLOOKUP(C1,'Most Recent Prices 2009'!A:G,6,0)
Column C = Unique part number.
Problem:
I have a tab of 100 or so prices that I don't want to be updated. How can I exclude these pieces of equipment when I drag down the above formula. Assume that these pieces of equipment are in a tab called 'keep' and their unique part numbers are in Column A.
Is there a way to copy a formula from Cell A1 down to A1500 withhout dragging the fill handle?
View 4 Replies View RelatedI have a formula in cell C2, =Summary!B2
I want the formula in cell C3 to be =Summary!C2
Then the formula in cell C4 to be =Summary!D2
etc etc.I need to do this for 43 rows so just want to drag the formula and the column number rather than the row number change.
I would like to drag down the formula from the last cell in Column A in reference to the last row in column B.
E.g My last data in Column A104 (code to select the last cell and this can vary from time to time the report is updated)
Column B has data till B142. I want to drag A104(contains formulas) down to A142.
Here is what I have but Selection Autofill doesn't work.
Range("A2").End(xlToRight).Select
Range("A2").End(xlDown).Select
Selection.AutoFill Destination:=Range("A3:A" & Cells(Rows.Count, "B").End(xlUp).Row), Type:=xlFillDefault