Formula that will repeat a cell number as it drags down and as soon as the number changes. I am using helper column that shows the cell number. I need to drag this down about 1000 rows.
Excel 2010
A
B
C
1
Helper Column
Desired Result
[Code].....
I have an Excel 2010 spreadsheet consisting of many worksheets (20 or so). Each of these worksheets contain detail level data regarding different projects. One of the columns in these worksheets is the 'Status' column (column F). There is conditional formatting on this column where if the text is 'G' then change background to a green color, 'Y'=yellow, 'R'=Red and 'U'=Grey.
The first worksheet is a summary sheet that I would like to pull information from each of the detail worksheet's columns B, D, E, G and H if the status column (Column F) is 'R' or 'Y'.
The number of rows in the detail worksheet can change each week (as few as 0 and as many as 100)
I'm using excel 2010 and windows XP with a moderate amount of experience tinkering with macro programming. I know what I need is very doable but I can't get my head around what the code would look like. I must not be wording my searches correctly because most of what I'm getting for results are iterative programs based on a cells value which isn't what I need.
I'm trying to build a macro that will check a cell (C3) and based on the contents of that cell copy a column (I) to one of 12 different columns (K:V). So if the value in C3 is 1 it should copy I to K, if the value is 2 it should copy I to L, and so on.
I work on an excel spreadsheet all day and I'm constantly cuting and pasting a value to filter another column. I would love to have a macro button that would automatically do this.
The job card sheets are labled 'Page 1' through to 'Page 175'. As I am working on each job card sheet I need to filter column on another sheet within the same workbook. This is indicated on the attached picture.
So in a perfect world as I would enter in the PLANT ID number on to any job card, then hit a macro button on the toolbar and the Pole No column would then be filtered by the value in the PLANT ID cell.
As there are multiple job cards the macro would probably need to use the 'active cell' value to filter by. But as you can probably tell I'm no expert so you judge the best way to do it.
MWTS034G22 Job Card Sheet
[URL] .....
Windows 7 (32bit)
MS EXCEL 2010
I have a sheet that contains the following columns:
Invoice, Document #, Date, PO #, Part #, Part Description, Quantity, Net Amount
Based on the quantity in the row I need to copy the row, and insert it n-1 times. So if the quantity is 5, I need to copy and insert the data below the original row 4 times for a total of 5 rows of data.
I plan on firing the macro with a button as the data will change month to month.
Using Windows 7 and Excel 2010
I am using Excel 2010. I am a novice user.
I have a lot of data to filter / sort. I want to initially to create a filter for a column of data - which has the format similar to hierarchical paths to files. The data is a mix of text/numbers. e.g.
pathA/path_X/path_Y/path_Z/lso0_rxs_reg_254__5_0/d
pathA/path_X/path_Y/path_Z/lso0_rxs_reg_253__5_0/d
pathA/path_123/path_456/data_out_reg_17_0/d
pathA/path_123/path_456/data_out_reg_0_0/d
pathA/path_X/path_Y/path_Z/lso0_rxs_reg_255__5_0/d
[Code] .........
Doing an alphabetical sort of this date would return the following order. As you can see while each strings in unique - there are many instances where they are simialr - if you ignore the unique numeric values at the end of the string.
pathA/path_123/path_456/data_out_reg_0_0/d
pathA/path_123/path_456/data_out_reg_17_0/d
pathA/path_123/path_456/data_out_reg_4_0/d
pathA/path_X/path_Y/path_Z/lso0_rxs_reg_230__6_0/d
[Code] ......
So what I want to do is to create a filter for the strings - but ignoring the numeric bits at the end i.e.
reg_[0-9]+_+[0-9]+/d
The strings are obviiously of varying length and the number of hierarchical paths is different, so I can't split string on "/".
Similarly folder paths names can contain "_" so can't split string on this either.
As I don't know how many "/" or "-" instances there will be in the string I don't believe I can use the find function. Also as the amount of number will be different i don't think I can use =right(a1,X) either.
I may be able to search for the pattern above - as this is probabay unique - so maybe it's something like the following pseudo code:
Function GetString(txt As String) As String
With CreateObject("VBScript.RegExp")
.Pattern = "reg_d+(_)+d+//d"
GetString = .execute(txt)(0)
End With
End Function
If I do require VBA code - how do I then use this for creating a column filter? Or will I have to extract the filtered data first from the column (and its associated row data) into another worksheet to use?
Once I have the filter in place I want to create tables using the filtered data - so for example each column value above has a lot of associated data values in each row e.g
26 pathA/path_123/path_456/data_out_reg_0_0/d
32 pathA/path_123/path_456/data_out_reg_17_0/d
8 pathA/path_123/path_456/data_out_reg_4_0/d
So my table would show the name "data_out_reg" and the range of values 8-32
I have chart like below. In empty cells I want either 1 or 0 (1 if software is installed and 0 if not).
Excel
Outlook
Powerpoint
Word
Computer1
Computer2
Computer3
Computer4
Computer5
Data of computers and their software are like this:
Computer1
Word
Computer1
Excel
Computer1
Powerpoint
Computer1
Outlook
Computer2
Outlook
Computer2
Excel
Computer3
Outlook
Computer4
Outlook
Computer4
Excel
Computer4
Word
Computer5
Outlook
So called Matrix Lookup was very close, but it finds data FROM Matrix (aka that first table). Is it possible at all?
Excel and Windows version:
Excel 2010 SP1
Windows 7
I have a range of cells each containing a name. Based on a number that has to be entered manually I want excel to return the names concatenated in one cell. So for example:
Number of variable entered: 5
q9001
q9002
q9003
q9004
q9005
q9006
etc.
Should give me: "q9001 q9002 q9003 q9004 q9005"
I have been trying to work with formulas using IF and CONCAT functions. But so far I haven't figured out how to have excel return me the correct amount of variables for each separate number that can be entered seeing the number of variables entered can vary from 1 up to 50.
(Using Excel 2010)
I am trying to create a sheet in XL 2010.
In Column A each cell will contain a date (differnet from other cells in that column) when inspection was last done.
Column B is when the weekly inspection is due.
Column C is when bi-weekly inspection is due.
Column D is when monthly inspection is due.
Column E is when 6 monthly inspection is due.
I need a formula to change the colour of cells B, C, D & E when each inspection is due depending on the date entered in A
I am hoping its possible that the cell colour can stay for 2 days after the due date and then return back to blank after the second day.
For example if cell A1 has a date of January 1 2013 then on January 8 2013 cell B1 turns red then on January 10 2013 the cell returns back to normal.
A1
B1
C1
D1
E1
Inspection Date
Weeekly Due
Bi-WeeklyDue
Monthly Due
6 Monthly Due
January 1 2013
Change red Jan 8 & return blank Jan 10
Change red Jan 15 & return blank Jan 17
Change red Feb 1 & return blank Feb 3
Change red June 1 & return blank June 3
Ive also attached the worksheet
I need to display a set of cells based on the value of two drop down cells i have. As I am not very good at english and worse at explinations, I'll try via screen shots...
I have two dropdowns (C4 and C6) that will indicate what table to use (Second sheet / screenshot). I want that "table" to display in the yellow box on the first page. To complicate matters, some options do not have a CLA option - those starting with X. As there are 24 different outcomes and each is 3x9 if/then statements just dont seem to cut it.
P.S. I have excel 2010 and windows 7
Is there a way in Excel (2010) to lock data from being entered into cells based on the value in another cell? Here is an example:
Row 4 contains dates from 2015-2030 as a header starting at column C (C4 and on) that represents years of revenue. Column B contains dates as well, this date can be any year but this becomes the driver for the data input in columns C through X. Column B contains the "Delivery Date"
Data is input in Columns C and so forth. The issue becomes that let's say that the date in C4 is 2016 and this is the beginning year. Obviously there should be no inputs for 2015 (C5) and the data should start to be input for this year at 2016 (C6). Often people just begin filling in the first available year not looking at what the year actually is.
Is there a way to add a formula or some logic/protection to prevent inputs in previous rows based on the values in column B? So if the value in column B is XXXX than there can be no inputs in cells less than that value?
I am using 2010 and want to select a range starting at the same cell all of the time (regardless of whether or not it has contents - so let's say B7. Starting at B7, I want the range to include all of the columns starting at B and go to the end of all of the columns. Then I want the range to include all of the rows starting at B7 and end at the last row. I will eventually copy this range and paste it on another worksheet start on a specific cell of another worksheet. (Perhaps, we can add a name to this range).
View 2 Replies View RelatedI have a spreadsheet that will eventually consist of tens of thousands of rows. Several columns contain formula's. Rather than having to "highlight" a cell and then "drag" all the way down the column over thousands of rows before finally using the "fill down" function I am needing a method to short cut this process?
Is there a function that allows you to, say, nominate a range of cells that you can fill down over? For example, starting from the last row with data entered into it down to say row 12500 i.e. D22:D12500.
I have 2 workbooks in Excel 2010, each contain just 1 sheet. (see attached) I need to compare on sheet 1, cell D1 and column A:A (this column will be much longer), with the data in columns C:C & A:A on sheet 2, if a corresponding match is found, the data contained in column D on the same row on sheet 2 is written to the cell with the matching data in sheet 1.
My attempt is in cell D2 on sheet1.
I need a macro to find the last cell in the column, then copy the formula to the next blank cell. Then, it goes back to the last cell (above) and paste's values. Then, go to the next column and repeat the process. I can do this but have to call each cell separatly...however, I would like to do it in a loop to simplify things. It would be great to even be able to just set the start and ending columns. Here is my current code:
Dim rng As Range, aCell As Range
Set rng = Range("C8, D8, E8, F8, G8, H8, J8, K8, L8, M8, N8, O8, P8, Q8, R8, S8, T8, U8")
For Each aCell In rng
Selection.End(xlDown).Select
Application.CutCopyMode = False
[Code] .......
It does not go to the next column, instead it stays in the same column and repeats the process.
I am using Excel 2010.
In my worksheet I have 'Column A' and 'Column B', In 'Column A' are product I.D. numbers. In 'Column B' is a text description of the product, whose I.D. number is in 'Column A,' and should also contain the I.D. number from 'Column A' somewhere in the midst of the descriptive text. However, some of these in 'Column B' do not.
I need to create a function that looks for the value in 'Column A' and determines whether or not it is present in the text of 'Column B'. Therefore, spitting the answer out in 'Column C' so that I can copy it down for 100,000 cells.
Why when I drag the dotted blue page break line does it sometimes break the entire doc into one page per cell ?
The doc is not wide. When I first load I can drag the break line successfully. Then I print preview... select print on both sides... boom.. goes from 4 pages to 14. Then I go back to page break view... drag the line... boom... Hundreds of pages. Even if I revert back to printing on one side it still is messed up.
How do I make this stop?? What am I doing wrong?? Office 2010
I have an array, say E6:E9. I have a single cell C6.
I want C6 to show an X, only if all E6:E9 have an X. If only E6 or E8 have X's, then C6 will remain empty. However if all E6:E9 all have X's, then C6 will display an X.
excel 2010
Two formulas which I need in Cells E74 and E75.
Basically the formulas will depend whether the entry in D73 are Yes or No
in cell E74, IF D73 = ‘No’ then E74 = D74 + E70 ELSE IF ‘D73’ = ‘Yes’ then E74 = E70
in cell E75, IF D73 = ‘No’ then E74 = D74 + E70 ELSE IF D73 = ‘Yes’ then E74 = E70
Excel version 2010
I am using Excel 2010 and trying to change/edit the color of the tabs in my workbook to turn green or red based on a y or n placed in a cell (the same cell on each tab). I have tried variations on several themes others have asked about as well for Excel 2007 and attempted to adapt them to fit my situation but none seem to work. Here's what I was starting with:
Private Sub Worksheet_Change(ByVal Target As Range)
Select Case Range("A1").Value
Case Is < 2.5
Sheet1.Tab.Color = vbRed
Case Is > 2. 5, Is < 4
Sheet1.Tab.Color = vbGreen
End Select
End Sub
The cell I'm using is F2 and my cell value is simply y or n. I realize the example above references numeric values and greater than/less than options, but I'm not sure how to correct this for my need.
I have a massive spreadsheet (ca.110 000 rows [excel 2010). I need to cut this monster by deleting all the cells that do not have a certain cell value within them.
Say that in my column A there are different entries (text type). I would like to delete the ones that do not match the following criteria:
"mytextascriteria*", where * somehow stands for the rest of the string.
Strictly speaking I can only determine beggining of the string I want to perserve but the values at the end of that string are changing.
I found the thread about deleting entire row based on a cell value here:
Delete entire row based on one cell?
but I couldn't quite work out how to apply it in my scenario....
Otherwise is completely pointless to do it manualy with these amout of records.
I'm trying to delete a range of rows based on the value of a given cell. For example, if cell AC1 shows 5000, then I'd like to delete (not just clear) the range A5000:AA1048576. Or, if cell AC1 shows 10000, then I'd like to delete range A10000:AA1048576. I've come up with what is below but I don't think this is the right way to do it. I am using Excel 2010.
Code:
Range("AC1").Select
ActiveCell.FormulaR1C1 = "=COUNT(C[-27])+2"
Calculate
Range("AC1").Select
Selection.Copy
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Application.CutCopyMode = False
Range("A" & Range("AC1").Value:"AA1048576").Select
Selection.Delete
The formula I found is close but I need it to count, not sum.
=SUMIFS($C$36:$C$51,$B$36:$B$51,$B36)
Example data: [972 1] [972 2] [972 3] [214 1] [214 1] [765 1] [765 2]
I want the formula to count the different numbers in the second column based on the first column. The results should show, 972 equals 3, 214 equals 1, 765 equals 2.
I am trying to separate this out but it keeps putting this paragraph.
I'm using Excel 2010). I have column I, which is the sum of columns A and B (first and last names of patrons), and I have used conditional formatting to identify all duplicates in column I with red text. I would now like a macro to find red text in column I and then delete the corresponding rows.
I've been looking around on the web for a while and have cobbled together this code stolen from other people's macros:
[Code] ....
When I run it, I get the following error:
Run-time error '1004':Application-defined or object-defined error
Excel doc is called "stupid mailing list.xlsm", sheet I want to run the macro on is called "voters".
Highlighed the Column and Row of the selected Cell. I have seen someone using it. Whenever he click on any cell the related column and Rows clour change. For Example if I select Cell B5. The Column B and Row 5 change its colur from B1 to B5 and Row from Column A to Column B. If this option is already available in office 2010
Column B
Row 5
My excel sheet keeps a list of Email addresses on column B (with duplicate email addresses), and their particulars from column C (Item price, purchase date, etc) onwards.
I need the vba to email multiple recipients (those with the "notification" field marked as yes) with their purchasing details in it. It should also prevent multiple emails to the same email address.
PS.Using Excel/Outlook 2010
I'd like to shade a range of cells based on a particular cells value.
Specifically:
If cell E3 is JUNE then I'd like the range of cells from B10 thru I10 to be shaded.
If E3 is JULY then it would shade C10 thru I10....etc.
Excel 2010
Excel VBA 2010.
I have this problem:
e.g Cells ""
C2 - 128.50 g
C3 - 211.01 g
C4 - 198.50 g
C5 - 179.34 g
I need to split the text into
Cell "C2" = 128.50 and Cell "D2" = g
Cell "C3" = 211.01 and Cell "D2" = g
and so forth
I wanted to avoid using delimited method with space and induce an automated method to format every cell of Column "C" one by one.
I'm using Excel 2010 and I'm having troubles displaying hiding my column B if none of the cells of column A contains either "(Quasi Echec)" or "(Quasi Russite)" at least once.
PHP Code: [URL] ......
Below are my 3 attempts.
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim c As Range
If Target.Column 1 Then Exit Sub
Application.EnableEvents = False
On Error Resume Next
[Code] ..........
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Sub GetUniquesInColA()
Dim rng As Range
Dim c
If Target.Column 1 Then Exit Sub
On Error Resume Next
[Code] .........
Code:
Option ExplicitPrivate Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim x As Long
Dim LastRow As Long
LastRow = Range("A65536").End(xlUp).Row
[Code] ...........
I'm trying to use Excel to build a text file based on values from certain cells in Excel 2010. This is based partially off of static text that never changes and variables that will need to change. For example, I want Excel to output a text file that has the following text: The red fox jumped over the $X twice. I would want $X to be replaced by the value of A1 of the active worksheet. I will also have several lines like that, so it won't just be a single line, but anywhere from 20 - 120.
View 1 Replies View Related