I have a master workbook that I reference data from hundreds of excels on.
I am trying to reference the cell "BU7" that has the workbook name (NT-13-001) in it, to reference sheet name "Purchase Order" at cell "H13".
Next line I would like to reference the cell "BU8" that has the workbook name (NT-13-002) in it, to reference sheet name "Purchase Order" at cell "H13".
The computer path is K:FRG TOOL REQ2013NT FormsNT-13-001
This is the formula I have tried... I have also attempted the INDIRECT function & Hyperlink GO TO.
I am using the formula below to sum across several worksheets, and the formula I am using works fine, but when I copy the formula across to other cells, I can't figure out how to have it update my cell range:
I would like to drag down the formula from the last cell in Column A in reference to the last row in column B.
E.g My last data in Column A104 (code to select the last cell and this can vary from time to time the report is updated) Column B has data till B142. I want to drag A104(contains formulas) down to A142.
Here is what I have but Selection Autofill doesn't work.
The formula works fine, but when I drag it to the next column c3:c39 stays the same. How do I get that reference to change when I drag the formula over multiple columns.
So I'm dragging my formula down one cell and as expected the reference cell changes the same amount when I really want the reference to shift Down that column 11 cell so when I take my formula
How do you make the Autofill function increment in blocks, e.g. instead of increment 1,2,3 increment 1,8,15 inthe following example: I have a 2 worksheets, one with days of the year across columns and values down rows, and another that summarises the sum of the corresponding days in weeks, so I have 365 columns in sheet 1 and 52 columns in sheet2. Everytime I update the sum range i cannot autofill it in the summary worksheet, as A1:G1 autofills to B1:H1, but I want it to increment to H1:N1.
So finally got my sumrpod working using this formula
=SUMPRODUCT(1*('Q:Documents13-14 FCGP CONTRACTING13-14 TrackingSouthPac - Team Use Only[South Pac Load Tracker - MAR14.xlsm]SPECIALS TEAM NZ'!$C8:$C10000=A5))
Is there a way i can link 'Q:Documents13-14 FCGP CONTRACTING13-14 TrackingSouthPac - Team Use Only[South Pac Load Tracker - MAR14.xlsm] to a cell so that when the next months tracker is created and the filename changes i simply change the filename in the cell which im using to reference the filepath/filename.
e.g A1 = South Pac Load Tracker - MAR14.xlsm
Formula would read =SUMPRODUCT(1*('Q:Documents13-14 FCGP CONTRACTING13-14 TrackingSouthPac - Team Use Only[' & a1 & ;]SPECIALS TEAM NZ'!$C8:$C10000=A5))
I have recently learned a little about Excel. Enough to be able to do our payroll for my company on it. My question is: On the 1st page of my workbook, is my quarterly report which shows all taxes, social security, and medicare we hold out each payday for each employee. The rest of the worksheets are for each employee. How do I have each employees withholdings automatically go to my quarterly report page?
I would like to know the proper syntax for recalling the value of a cell in another workbook. For example, I want a variable in my code to equal cell(1,1) in sheet1 of workbook1.xls.
Now this works perfectly fine, but I am wondering if it is possible to replace 2013-004 so that it reads the text from a cell on that sheet to complete the file name.
I want to replace the 2013-004 in B1 with text from A1. I have tried multiple methods but it just always assumes it is part of the file name or breaks the formula.
I have a workbook with many tabs and within those tabs there are many hyperlinks to other areas within the same workbook. When I add or delete lines or rows, the corresponding hyperlinks do not stay with the changed cell. Is there any way to make the cell reference in a hyperlink an absolute similar to how you do with a formula?
I've got a field where I enter the current month, from this I derive a file path which is stored in A4.
ie: A1 = '01/11/2011' (UK Date format)
A4 = '\myserverdirectory20111111MyFile.xls'
What I'm trying to achieve is to then have a link in cell A6 that will link to the file in A4. I can specify my cell reference as this will never change, just the file path.
So, if I changed A1 to '01/12/2011' my A4 changes to '\myserverdirectory20111211MyFile.xls'
I'm trying to set A6 to something like ="&$A$A4&"!B1 to get the value of B1 on my referenced sheet.
I'm trying to link a range of cells in one workbook to a range in another workbook, both in a network drive. Everything is working out well except for the cells that have a data validation list on them. the formula linking one cell is ='G:Destination To[Workbook2.xls]SheetX!B13 so I'm just trying to get the value in the cell. I don't need the validation list to transfer just the value of what was selected. If I go to that cell and type something in then it transfers over just fine. If the validation list was used in Workbook2 then I get a #N/A in Workbook1 that is linking to the Workbook2 cell.
How can I link the cell with a data validation list in it to a cell in another workbook so that I can get the data in the cell (whatever was selected from the validation list)?......
i'm trying to do a COUNTIF from an open workbook. The range I want for it is in another workbook, which I do not want to have open every time I run the macro.
This is my current Sub cellLink() Sheets("Calls In-Out Trend").Range("ag18").Formula = _ "=COUNTIF('C:***[*.xls]sheet name'I:I, QXO)" End Sub
editthe range is just so I can see if it's giving the right values, the range won't be like that once I get it working. I'll probably be using logic statements to place them in the appropriate cells. The * is just me taking out the directory names, its on the desktop)
It can copy cell values from another unopened workbook, but when I try to put in COUNTIF it doesn't want to compile/run the script.
That's basically the question. Here's some background and my aim:
I'm scanning row I:I for certain keywords which I then count up and put into corresponding columns of a chart.
I need to reference a cell to another cell in a different workbook (not opened), however the name of this workbook contains a variable in its name. Something like:
='C:[Week" & variable &".xls]R23'!$D$3
where variable is the number of the week. I have tried using a cell name instead of a variable: ='C:[Week=($B$3).xls]R23'!$D$3
and I get a dialog box to update values by selecting a file.
I am designing a spreadsheet at work, and need a little assitance. I can't find the answer I need online or here either. Here's the problem: I want to be able to enter data (A 5 digit job number, 80227 for example) into a cell, and then multiple other cells would auto fill with data from outside worksheets. The worksheets are in a seperate folder on my server and named under the same name as the project. (So if I entered 80227 as the data in A1, I would want A2, A3 and A4 to open spreadsheet 80227.xls on the server, locate the referenced cell/s, and insert the info from 80227 into them.)
I can easily reference the cells alone and have them input the data, but this is extremely time consuming since this spreadsheet has all the current jobs our company is working on. I currently am running a macro/VBA that automatically updates all linked spreadsheets without them having to be open, so that is not an issue.
What is the best way to reference a cell in another workbook and return the cell contents and the comment on that cell. I would like the comment to come across as a comment in the new workbook becuase the comment is actually a picture.
Hope this makes sense. I did find a macro through googling but I couldn't get it to work? I don't really want to copy and paste because eventually I have hundreds of sheets & thousands of cells to refer to.?
I currently have a file that is linked to an external workbook that is referencing a certain cell from a certain tab. The below is what Column A & B look like right now. What I'm wanting to know is is there a way to have the formula in Column B automatically reference the name in Column A (which is the tab name in the external workbook) instead of having to manually change the formula when the value in Column A changes?
In other words, I want everything in the external reference formula to remain the same except have the person's name change dynamically...
Mary ='X:Anderson CorporationEmployees[Work Hours]Mary'!$F$42
Joe ='X:Anderson CorporationEmployees[Work Hours]Joe'!$F$42
Frank ='X:Anderson CorporationEmployees[Work Hours]Frank'!$F$42
Within one workbook I have 15 sheets, 13 are for separate divisions within the company, 2 are used to present sums across the 13 sheets. All 13 sheets have identical columns and rows, with unique numbers in each cell. Right now I am manually selecting the cells to reference in my master sheet, =sheet name!cell+sheetname!cell+sheetname!cell - so and and so on. How can I reference the sheet name once, and then all of the cells to SUM? =sheetname!(c4+c14+c24+c34) etc?
This would let me be able to copy the formula from cell to cell, and only have to change the sheet name each time.
I'm trying to get Mac OS X Excel VBA to understand this code however the ChDir reference and the filepath seem to be causing problems. I would like to specify in the code where the file should be stored but I did try removing the filepath section altogether but to no avail.
Option Explicit Sub SvMe() 'Saves filename as value of A1 plus the current date Dim newFile As String, fName As String ' Don't use "/" in date, invalid syntax fName = Range("A1").Value 'Change the date format to whatever you'd like, but make sure it's in quotes newFile = fName & " " & Format$(Date, "mm-dd-yyyy") ' Change directory to suit your PC, including USER NAME ChDir _ "C:Documents and Settings USER NAME Desktop" ActiveWorkbook. SaveAs Filename:=newFile End Sub
I'm making a dashboard and currently using a camera tool to show a sheet in a different workbook.
However the camera shot should show the sheet for the current month. (the workbook contains 12 sheets one for each month)
I was trying to reference a cell within the dashboard workbook in the formula bar to select the correct month.
[Code] .....
This is the workbook being referenced and
[Code] ....
This is what I have to try select the sheet with the right month. W2 contains whatever month it currently is.
I get that this formula is wrong because I'm referencing a sheet/cell in the dashboard workbook right after calling the tracking workbook, I just don't know how to write it correctly.
I am trying to use VB to vlookup between to workbooks 1. Make active workbook WBK1 2. Make workbook being open WBK2 3. Copy and Paste between WBK1 and WBK2 4. Have a vlookup in WBK1 and bring in the values from WBK2 5. Close WKB2 6. Copy, Paste, and transpose values in wkb1 within wkb1
The script works fine until it reaches the vlookup step. I have used the vlookup by itself without the copy and paste code successfully but when I combine the two it provides me with the error 9. Subscript out of range.
I have an excel workbook with two sheets: 1. Data. 2. TR.
Once the choices are made (dropdown lists) and the button is clicked, TR sheet is filled. I need a macro that would drag the cells of E4,J4,O4,T4. To the cell beneath them, once data is filled in either C or D, H or I, M or N, R or S. The dragging of the cells will display the results (column E,J,O,T), thus, totals will appear in the CONS sheet.
Formula that will repeat a cell number as it drags down and as soon as the number changes. I am using helper column that shows the cell number. I need to drag this down about 1000 rows.
