This is dragging the formula to the end of the report. My dilemma is that this was captured with the macro recorder. Is there a way to change "S2702" with whatever row Column S ends with? Meaning this formula will be used on different sized reports so the numbers will vary. I just need a direct statement to compensate however large the report is.
Is it possible to write a formula that skips x number of cells and have the formula autoincrement as usual. For an examples lets say I want to skip 3 cells and I have entered in the cells listed:
A1= "1" A2= "2" A3= "3"
Then I type in the simple formula in the cell B1= "=A1"
and then drag down but it skips 3 cells so then
B5= "=A2"
B9= "=A3"
If it didn't skip then B1= "=A1" B2= "=A2" B3= "=A3"
this is just an example as I will be writing more complex formulas and need some thing that I can write into the formula so that it skips.
i have a sheet with alot of data, its a contacts list. colum A is Company name, B contact name, C address, D postcode. One row = one contact. On the next sheet i want to have on column with each contact set out as if it wer on an envelope, so i did the formula:............
if i select all of this space and try to drap the formula down the next cell fills with =sheet1!A11......I want it to say =sheet1!A3. If i cant drag it down then I am going to have to manually write this formula 100000000000 times.....anyoning.
I have obviously hit a combination of keys that has turned this function off. I can no longer drag and fill cells with a formula, it will only copy the original text/value into adjacent cells. How can I fix this??
I am having issues with this sheet. i am trying to get this formula to stick, when i drag down or across. its not holding the formula true to the first column. i am unsure of what this is called or else i would be using more specific words.
I am trying to get this tricky formula to work with vlookup and if error. The problem is that excel will not recognize the formula when I try to drag it down, but instead repeats the same numbers over again. I've tried some combinations using vlookup, rows, and if error, but it doesn't seem to work. So I'm trying to drag down the formula from g3:g99, to reference either cells b8:99, or whichever value I enter into f1, on down to b99.
If I need to replicate a formula in some cells, I usually drag it down or sideways. Is there any easier way to do this? I have large numbers of cells into which to drag the formula. Can I specify which cell range the formula is applicable to (i.e. A1:A10,000 or something) instead of dragging? If so how?
Let's say I have a value in B2, and a formula in C2. If I drag the formula from C2 all the way down to C20 (spreading it 18 times), the formula wants the value in B2, B3, B4, etc.. down to B20. How do I drag a formula, but have it always reference B2?
Im working on a financial forecast in ecxel and I'm trying to drag a formula from left to right, while referencing horizontal cells from a different tab:
Specifically, I have created a "loan schedule" which shows 12 monthly interest payments starting in cell B46 and ending in cell B57.
In a separate tab labelled "Balance Sheet", I would like to show the first interest payment ('loan schedule'!B46) in cell C28. Next, I would like to select the cell and drag it to the right so that the remaining 11 interest payments will be transferred into D29, E29, F29 etc. Unfortunately,the spreadsheet doesn't reference to the vertically listed interest payments from the loan schedule but instead references the cell to the right of the interest payment. Using "$" seems to be of no support.
The formula works fine, but when I drag it to the next column c3:c39 stays the same. How do I get that reference to change when I drag the formula over multiple columns.
I am using the formula below to sum across several worksheets, and the formula I am using works fine, but when I copy the formula across to other cells, I can't figure out how to have it update my cell range:
I have a workbook with multiple sheets interacting with one another. On one of them the user is prompted to make lists of expenses in multiple columns. The column labels are in row one, and row two has the sums of all the cells below. I have every sheet in the workbook protected, so that only the cells that need to be modified are unlocked. The problem is that the user can drag cells around and change the range of the functions in row two (locked cells).
For example, A2 has the function =sum(A3:A100). But if the user drags the values in A3:A5 to A6:A8, the formula in A2 changes to =sum(A6:A100). Is there anyway that I can allow the user to drag cells (this could be a useful feature), but keep the formulas in the second row fixed?
I am trying to work out a method which will allow me to drag the forumula which is in cell B13 from B13:B17, and have in increase the date serial number by one for each row by which it descends.
In other words I want to drag the formula down to, say B14, and have it increase the date serial to = that which is in cell A14.
[the obvious benefit of being able to do this is that I don't have to manually adjust the date serial in each cell on each new row]
appending excel sheet number in a formula. Here is the example.
In an excel book, I have sheets 1 to 50. In each sheet i have a standard format to enter the details. And in one sheet I want to keep some summary with required cells. I made a table by applying formula, for example in cell A1 i kept formula ='9'!$D$9. In this '9' refers sheet9. In the similar way i want to capture the data from all sheets.
Is there any formula to append the Sheet number automatically (like dragging the shell) intead changing sheet number manually. because it is wasting so much time.
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
How do you make the Autofill function increment in blocks, e.g. instead of increment 1,2,3 increment 1,8,15 inthe following example: I have a 2 worksheets, one with days of the year across columns and values down rows, and another that summarises the sum of the corresponding days in weeks, so I have 365 columns in sheet 1 and 52 columns in sheet2. Everytime I update the sum range i cannot autofill it in the summary worksheet, as A1:G1 autofills to B1:H1, but I want it to increment to H1:N1.
1) Data - the students are listed in Column A, math scores in Column B, reading scores in Column C and science scores in Column D. The grades of 300 students are entered in this sheet.
Student Math Reading Science
Jimmy 75 84 100
[code].....
2) Report Card template - This is the report card that needs to be generated for each student. It's pulling the student name and grades from the Data worksheet.
Student Name =Data!$A2
Math =Data!$B2
Reading =Data!$C2
Science =Data!$D2
How do I create worksheets (report cards) for additional students? I have 300 students in the school. I need the next worksheet to reference Data!$A3. I know how to cut and paste the report card template and then edit =Data!A2 to be =Data!A3 to create a report card for Sally. How do I create the 300 report cards I need?
I've been teaching for 13 years. I can create a report card for each student in my class and edit each worksheet individually for each student. Now I've been asked to do this for the whole school and I don't know how to create the other 299 sheets I need.
I have a report that gives me dates in a format that's mostly useless. I am sure there's a simple formula I can do each time I run the report, but I'm not sure. My report gives me dates like this...
How do you create a macro to copy the information from my weekly reports to a monthly report and be able to update automatically. If you had 4 worksheets (for each week of the month) and 1 mastersheet for the whole month in a workbook. All titles are the same and If you needed to copy all the data that is in the columns, say, A through I, starting with row 4 to however many rows are in a given week. The reports can be made up of numicerial values, text and dates. Let me know if more information is needed or an example worksheet.
I am creating a report and I am using the following Formula with condition.
(IN Q2 in the file attached) =IF(P2="","Enter New to IMP check Date",DATEDIF(P2,C2,"d"))
Where in P2 is the START Date and C2End date. P2 = 01 Jan 13 C2 = 10 Mar 14
When I apply the DATEIF formula its ignoring the year differ ace and give a result of 8 days not sure whats wrong here as the "Y" & "M" function works correctly and give proper result.
Ok. I am creating item lists in excel for every product that my company sells. I am in need of a formula that does the following:
I want the cell to check to see if there is a value in another cell, and if there is anything at all, i want to display the word Yes as the value, or leave the cell empty.
So I want the cells in Column A to Check if the adjacent cells in Column B have a value. If the column b cells have a value I want the cells in Column A to display the word "Inventory Part". If there is no value I want the cell left blank.
The first book is a report that is generated on my reporting systeM (Report I use everyday) The second report is the one that I have created myself using a macro (macro report)
I have to manually manipulate this report everyday and extract some information from it to
a custom report(macro report) that we use everyday.
I have created a macro for this - please see my code below.
I need some help with some small issues I am having,(Highlighted in yellow)
1) I need to include a Total line, but the size of the report varies everyday from say
around 30 rows to over a 100 rows. Is there a way i can make the total always 2 rows below
the report, please see attached for an example.
2) I need to hardcord a formula in on Column F and G. But again the report varies in size,
the columns do not change but there could be lots more rows. how do i take this into
So I am trying to rearrange some cells on a report based of some criteria using an IF formula and getting Blank cells. Here's what I have:
LastRow = Range("A" & Rows.Count).End(xlUp) With Range("P2:P" & LastRow) Formula = "=IF($F2=""/FEDERAL EXCISE TAX"",$I2,"""")" .Value = .Value
[Code].....
So I just want it to identify whats in a cell and populate a related value if the text is present. Do I need to change formatting to find Tex or something along those lines?
I currently have a report with so many large array formulas that it is virtually unusable. I want to use the DSUM formula in place of my array formulas but I am vexed in regards to creating a DSUM formula that I can put in the top-left cell of my report and then copy down to the bottom right side of my report. Currently, the array-formulas sum data from a large list when it meets two criteria -- one part of the data-record in the list must match the row label of the current row in the report and another part of the data-record in the list must match the column label in the current column of the report. I have found with the DSUM formula that you can use a "formula" criteria in place of a static criteria...the problem I am having is that the part of the formula that points to the data-set must be relative while the part that points to the formulas criteria needs to be static -- in order to be able to make one DSUM formula and copy it down and over I would need my formula criteria to have the opposite setup (with the data-set part static and the formula criteria as relative).
I've got a forecast from a customer and need to summarize it with part number, quantity and date.
The spreadsheet is part no in column a due dates in row 1 values at the intersection of part no and due date and i don't want 0 quantity to report back.
