I am autocreating tabs running through a loop and I want to input a formula into certain cells with the tab that was created name into the formula becuase I got to refrence it in my formula and the cell so now I need to figure out how to get that name into the formula without it saying E.
View 4 RepliesI have a summary page that includes the titles for each tab within the excel 2003 workbook. I want to use the names of the tabs in the summary page and create it into a formula to lookup fixed cells within the various tabs. Sorry for not uploading an excel doc but I was at work earlier and the thread did not load for some reason, so I am reposting it.
View 3 Replies View RelatedI have the code below and it runs a report for me but it puts the new tab to the left of my existing tabs. How can I alter the code to put the new tabs on the right?
If Me.cmbCat.ListIndex > -1 Then
'Add a new worksheet
Set WSReport = Worksheets.Add(before:=Worksheets(1))
With WSReport
'Check sheetname and keep adding 1 until not found.
If SheetExists("Report " & Me.cmbCat) Then
Cnt = 1
Do
[code].....
how to insert multiple tabs in the workbook?
i try this
Code:
Option Explicit
Sub Add_Multiple_Tabs()
Dim Tabs As Variant
Dim I As Byte
[Code]...
I'm trying to figure out how to create a macro for a project at work. Basically, think of a spreadsheet with 5 tabs, but the information in Tab 1-Column D is the same in Tab-4 Column D and Tab-5 Column D. When I insert a row, though, I have to go to each tab, insert the row, and copy down the formulas from the row above to ensure the flow-through stays true. This can get very tedious.
Does anyone have a template or tips on a macro that would, in essence, work like this:
a) Highlight the row above which a row should be inserted
b) Trigger the macro
c) A row is inserted above the highlighted row in Tabs #1, #4 and #5
d) The information from the row above the inserted row is copied down to the new row in each of the three tabs.
I can use the MATCH function when i am in excel but i am having trouble getting it to work when i am trying to insert the formula using VBA.
Here is the code i have but it wont even compile........
I have a workbook with roughly 100 tabs and a summary tab for the data within the 100 other tabs. on the summary tab I have column A with the name of each tab, i would like to copy a formula down column B that pulls the data from each tab on cell C5 for example, maybe even look up other info too, but that is another question.
What i need to know is can i write a formula that uses the tab named in column A and pulls the cell C5 from that named tab without having to manually change the name of each tab in the formula?
The basic formula would be ='17003.05'!C5 however since i have 100 tabs, i did not want to have to go in and edit each tab name.
I need a formula to add cells between tabs
View 5 Replies View RelatedI do have a file in excel with total 9 tabs. The last tab, has some formulas, which is taking data from tab 3 to 8 and calculates something. Tabs 3 to 8 are identical, (same data inputs from different departments). When I will distribute the file to some colleagues, they will need to add some tabs in between tabs 3 and 8, depending on their needs.
I want that in the formulas in the last tab 9, the data from the tabs entered additionally, is taken into consideration. How I can define the range of tabs, so that tab 9 takes then the data from all the tabs in that range, even if tabs are added in between?
I'm a bit over my head on this one. I want a formula that does the following: Look at the date I put in on the last tab and find the correct date on the other tabs. Using that date as the column I want it to return the correct row for the data.reference.
I am using the HLOOKUP function. I'm not even sure this is the right function. Ont the workbook attached I'm trying to get the data on the Totals tab to come from the Sept Wk 1 through Sept Wk 5 tabs. The formula I tried to use is on the Totals page C7.
I'm trying to come up with a Macro that once it see's the word "Rolls" in column M, I would like for it to go to the row below the word and divide the information on column K by 30
then for it to perform this formula for the next 17 rows and on the last row have the cell in gray color.
Then for it to keep doing this recursively down the column of the sheet and once finished to go to the next tab and do the same algorithm(there's like 40 tabs !!)
I need a formula that will allow me to look up data on different worksheets. I have 5 worksheets (1 summary, and 4 with raw data). The raw data tabs all have the exact same number of rows and columns but the data is from a different region. I want the user to be able to select from a drop-down menu which region they want summary data tab to pull from using a vlookup formula.
For example, I have five tabs in my workbook: Tab1) Summary Tab which needs to pull the data from the other four tabs, Tab2) named "West", Tab3) named "East", Tab4) named "South", Tab5) named "North". Using a drop-down list, I want to be able to select either West, East, South or North and have the vlookup formulas look at the corresponding tab for the data. So, in my example, if I select "North" from the drop-down menu, I want the vlookups to pull data from the "North" tab etc. I do not want to use PIVOT TABLES for this.
I have a workbook with 5 or more tabs. One of the tabs is a CONSOLIDATION of all the tabs put together. I have columns on the consolidation tab with the names of the individual tabs. To the left of these columns is a list of general ledger numbers with their respective names. For example:
East West NE South
6103256 –sales
6540000 -salary
510000-travel
I want a excel to look at the individual tabs, for this specific gl number and name and, if applicable, return a value. What formula would do this?
My columns are not showing up correctly. East,West etc are the columns. 6103256 - are the rows
I am trying to create a formula by comparing data in columns on a separate tab.
Basically, I want to take the value of one cell in the primary tab, find the matching value in a column on another tab, then once it is matched, pull in the data from another cell in the second tab on the same row of the matched data.
I have been trying to get Excel (2007) to change the colour of tabs to match other tabs in the workbook
Using this code I get the colour code of the current tab
Code:
x = ActiveSheet.Tab.ColorIndex
But when I use this value in a procedure like this:
Code:
ActiveSheet.Tab.ColorIndex = x
The tab is a different colour!
I have a workbook with 30+ worksheets
named 23 Wed, 24 Thur, 25 Fri, etc etc
meaning April 23, 2014 Wednesday, April 24, 2014 Thursday, etc etc
The next project may start on May 19, 2014 Monday - so I have to rename each worksheet beginning with 19 Mon, etc etc
Renaming each worksheet manually takes a long time and is prone to error
I would like to just rename the first worksheet to start date of May 19, 2014 and have the rest renamed automatically.
I need to create a formula using 2 different tabs within an excel workbook. I need to search column A on the first tab and column A on the second tab and if they match I need to compare column F on the first tab to column F on the second tab. (This column contains my staff names but the problem I am running into is on the first tab their names are listed first name last name and on the second tab they are listed last name, first name). If column A and F match I need to search column H on the first tab to column H on the second tab. If all columns match up to this point I need to take the data in column Q on the second tab and in put it into column K on the first tab. Is this even possible?
View 2 Replies View RelatedIs it even possible to create an IF/AND formula that draws data from multiple tabs?
For example,
(assume there are tabs named exactly the same as each of the data entries in column A)
IF A2 = "ARI" then D2 = ARI!H3. Is this possible?
I have attached an example workbook where I have three worksheets i.e. Data1, Data2 and Master Data all of which have the same data format in each column
I have data in the Data1, Data2 tabs and was wondering if it is possible to copy the data from both these tabs (using formulas) onto the Master Data bearing in mind the rows of data in the Data1, Data2 can vary on week to week basis.
Excel version 2010
Attached File : Data.xlsx‎
I have a situation where I have to curve fit data, this can lead to different formulas being used with varying constants.
Is it possible to pickup a TEXT based formula and related constants from other cells, and then place this into another cell as a functioning formula. For Example
Cell A1 contains the formula as a text string whether it be y=a+bx+cx^2, or y=a+b/x, etc
Cells A2:A6 contain the individual constants, a, b, c, etc
I would then want the VBA to read the text based formula and put it into an output cell as a functioning excel formulae.g
In cell B10: =a+b*A10+c*A10^2
I understand picking the constants up and putting the formula should not be too much of an issue, however trying to insert the variable form of the curve fit is the part that I am struggling with, and am unsure if possible.
How can I get a vertical lookup or sumIF formula to check multiple tabs for a given value?
Or - is there a way to specify the tab? For instance, put "Tab A" or "Tab B" in Cell A1, and have the lookup formula reference the value of Cell A1.
I use this formula for converting date of birth to a number based on today’s date. I have tried to have the number.. 6yrs 6 months to print only 6 not 7 years old. How do I insert the rounddown formula into this formula
=IF((AD37=""),"",YEAR(AQ36)-YEAR(AD37))
I have a spread sheet that I need to insert rows into and then in those same rows, add formulas that display percentages compared to the grand total row. To make it a little more complicated, this spread sheet changes from day to day, so the rows and columns will be different each time. So the code will have to recognize text, then insert the row, then do the formulas in the blank row. The only constant will be that it will always start on Row 5. I have no idea how to start or begin to do this, so I attached a file with a page showing where I am at as an example, and then anther page showing what I want ....
View 10 Replies View RelatedWhat kind of a VBA code for inserting the formula such like this one
=INDEX('Bill'!$F$2:$F$510,MATCH(J2,'Bill'!$I$2:$I$510,0)) in multiple rows of the same column.
I'd like to insert it in column H of my sheet named = LIST in consecutive rows till the last data cell in column A.
I am wanting to use VBA code to insert the formula =IF(B8="","",VLOOKUP(B8,Information!C4:D200,2,FALSE)) into cell B9 (it is merged to form cell B9:B13).
I have the formula copied into cell M4 on sheet 3 and have tried to reference it but can't seem to do it. I am happy either using VBA to reference it or using a VBA code to insert the text into cell B9
How can i get the formula from sheet 3 into cell B9 in Sheet 1, or simply put the text in.
In the attached sample workbook, I am trying to insert the formula contained in "C2" down column "C" for each row of data. Is this possible using a Loop? Have I entered the code incorrectly?
View 7 Replies View RelatedDoes anyone have a code for inserting a formula for every so many # of rows? In my case I have to insert a vlookup formula into every 66 rows, in column L.
View 9 Replies View RelatedAll I want to do is insert a formula into a text box. This thread answers the exact same question but I don't understand how to highlight the text box as an object... [URL]....
View 2 Replies View RelatedI need a formula to take a 6-Digit Number and change it into a 7-Digit Number. Probably a if statement would better because i have 7 digit numbers in the same column with 6-digit numbers. I need to insert zero between the 4th digit and the 5th digit of a 6-digit number. For Example:............
View 5 Replies View RelatedI have a spreadsheet with data in the first few columns, then a few columns of different formulae which reference the data.
This spreadsheet is constantly getting rows inserted into it, and I'd like for the formulae to be copied into the new rows automatically, rather than having to copy/paste the formulae every time columns are inserted.