Macro To Insert Rows In Multiple Tabs

Feb 19, 2010

I'm trying to figure out how to create a macro for a project at work. Basically, think of a spreadsheet with 5 tabs, but the information in Tab 1-Column D is the same in Tab-4 Column D and Tab-5 Column D. When I insert a row, though, I have to go to each tab, insert the row, and copy down the formulas from the row above to ensure the flow-through stays true. This can get very tedious.

Does anyone have a template or tips on a macro that would, in essence, work like this:

a) Highlight the row above which a row should be inserted
b) Trigger the macro
c) A row is inserted above the highlighted row in Tabs #1, #4 and #5
d) The information from the row above the inserted row is copied down to the new row in each of the three tabs.

View 6 Replies


ADVERTISEMENT

Macro To Select 2 Rows From One Workbook To Another With Multiple Tabs On Each

Feb 21, 2014

I have 2 workbooks. The workbooks have 36 tabs for each department. Workbook 1 are current charges for the departments and workbook 2 is the revenue for each department. I would like to take the top 2 rows from workbook 2 and add them to workbook 1 at the bottom of each tab. I was able to get it to work to a specific row but the workbook 1 has variable rows for each tab.

View 3 Replies View Related

How To Insert Multiple Tabs In The Workbook

Aug 11, 2013

how to insert multiple tabs in the workbook?

i try this

Code:

Option Explicit
Sub Add_Multiple_Tabs()
Dim Tabs As Variant
Dim I As Byte

[Code]...

View 7 Replies View Related

Multiple Rows Of Sheet Tabs?

Aug 15, 2013

I have a lot of sheets, in my workbook. It keeps expanding, as I add them. How do I make multiple rows of sheet tabs, to keep from having to scroll across all the time?

View 4 Replies View Related

Any Way To Stack Sheet Tabs In Multiple Rows?

Apr 30, 2013

I have a spreadhseet with lots of sheets. Instead of scrolling across to see ones out of view, it would be really neat if the view of the sheets could be stacked to show them on multiple rows.

Can this be done?

VBA is an option if I need to go down that route.

View 3 Replies View Related

How To Copy Rows To Multiple Tabs On New Worksheet

Jul 21, 2013

is it possible to Copy Rows to a multiple tabs on a New Worksheet using a start date and end date as reference?

I have a button (named Draw Report) on the Raw Data xls. should copy tickets uniquely on a new workbook, by uniquely - no duplicates on the new workbook on a given date range.

Will it be possible to separate them into tabs according to values under Assigned to (Transaction 1, 2, 3)?

Could we also copy the exact 2nd worksheet (Report) on the Raw Data xls on the Output.xls?

The Output would contain 4 tabs: Report, Transaction 1, Transaction 2, Transaction 3)

View 1 Replies View Related

Arrange Worksheet Tabs In Multiple Rows

Mar 29, 2004

I was wondering if there was a way to arrange the sheet tabs in a workbook to appear in multiple rows, thus negating the need to scroll. I have a workbook with a large amount of sheets and wanted all the sheets to be easily accessible.

If that is not possible is there a way to truncate the visible sheet names so that only the first four or five characters are shown, without actually changing the sheet names themselves?

View 5 Replies View Related

Copy Rows From Multiple Tabs Into One Sheet

Jun 11, 2008

I am looking to write a macro that will take 5 sheets and paste the rows into 1 summary tab. The names of the sheets are, CMH, ORD, JFK, LAX, and MIA. There are other sheets in the book but I donít want any information from them. The five sheets have the same columns. I want to paste only the rows of the last entry for Origin and Forwarder. I have enclosed an example. So in rows 2 & 3 we have the same Origin-Forwarder combo but I only want the most current which would be row 3. Some Origin-Forwarder just has one entry so of course I would want that one.

View 7 Replies View Related

Referencing Multiple Tabs To Rows Within One Master Sheet

Jan 15, 2014

I am creating a spreadsheet to track customer data and need to reference certain cells in individual customer tabs to a master sheet that contains every customer. Each customer will have his own tab, each tab having the same layout, and each client will also have their own row on one master sheet within the same workbook.

My question is, is it possible to reference the specific cells in the clients individual tab to the master list once, and then everytime I copy a new client tab, the referenced cells in that tab are immediately referenced to the corresponding client (new) row in my master sheet within the same workbook?

View 3 Replies View Related

Macro Needs To Run On Multiple Tabs

Mar 13, 2012

I would like this Macro to run on 6 different tabs in a worksheet as one Macro. It is currently only running on the active sheet. The tabs that I need it to run on are labeled "Totals" "New" "Used" "Service" "Parts" "Other Income-Ded"

Sub ExpenseAnalysis2012()
Dim rngSource As Range
Dim rngDestination As Range
Set rngSource = Range("D3:E90")
Set rngDestination = Cells(3, Columns.Count).End(xlToLeft).Offset(0, 2)
rngSource.Copy
rngDestination.PasteSpecial (xlPasteValues)
End Sub

View 2 Replies View Related

Macro To Copy Rows From Many Tabs To Summary Tab?

Jun 11, 2014

I have a macro that takes data in rows 1 through 500 from many tabs and collects them in the summary tab.

I would like to write a macro that only selects rows that have data in Column A. Therefore, reducing the number of rows copied from all tabs from 500 to only a few that contain data that I really need.

This is what i currently have:

[Code] .........

View 8 Replies View Related

Macro For Multiple Tabs From A Data Set

Sep 10, 2007

I'm not very good with macros and I need to create a macro that copies data from one excel worksheet into multiple other worksheet tabs in the same workbook. I have 8 columns and thousands of rows of data. The spreadsheet is sorted by column E.

In column E, there are about 25 different values going down throughout the spreadsheet. I would like the data for each of these Column E categories to be copied over to a new tab in the spreadsheet with the tab name as the value in E. So in the end there would be the main tab, and then 25 new tabs with the filtered data. Does anyone already have a macro that will do this?

View 9 Replies View Related

Macro To Split Rows Into Groups Of 5 And Insert 3 Blank Rows In Between

Feb 9, 2013

I would like to have my macro code search column A (supplier numbers) and split the rows into groups of rows of 5 or less and then insert 3 blank rows between each group of rows. The split needs to start on a new supplier number and cannot split a supplier number into two different groups. Here is a sample:

Supplier
Invoice Date
GL Date
Invoice Amt

[Code].....

View 1 Replies View Related

Macro To Insert New Rows Based On Commas In Previous Rows?

Mar 15, 2014

I'm a macro novice and have been trying to teach myself how to write the correct one for a task I need to do, but I cannot seem to get it right. Basically, I have bunch of data and for one of the variables, different values are separated by commas. What I want is to create a row copying the info below for each piece of data after the comma.

Sheet1

A
B
C
D

[Code].....

I suspect there is a fairly easy way to do this, but I cannot figure it out from searching the forums (or rather, I can't get it to work right).

View 6 Replies View Related

Macro To Create Multiple Tabs With Same Spreadsheet On And Date Them

Jul 20, 2014

I am trying to create a workload spread sheet for work I need to have the same looking spread sheet 365 times but also need each sheet to be dated, EG (tue,01/04/2014 through to tue,31/03/2015) I can create 365 tabs that have the same spread sheet on and I can create dates but not do both at the same time, it isn't fun doing copy and paste 365 time.

View 1 Replies View Related

Macro To Transform Formulas Into Values Across Multiple Tabs

Feb 7, 2014

I have never written a macro and when I record one I usually have trouble with the relative references.

I am trying to write a macro to transform formulas into values every month.

I want to transform formulas:

- across a range of tabs: each tab is exactly alike and is named page-1 to page 25
- on a different column every month (same column across all tabs)
- on the same rows: L168 to L227 and L266 to L277 (same rows across all tabs)

View 6 Replies View Related

Macro To Split Data Into Three Different Sheets / Tabs - Delete Blank Rows

Jul 30, 2013

I'm pasting a lot of data into a spreadsheet and then using a macro to split the data into three different sheets/tabs. I'm doing this by simply copying entire columns. Each sheet/tab has a headings row and autofilters added so that my boss can filter on certain manufacturers in one of the columns.

The problem is that when he selects a manufacturer, at the bottom left corner of the screen it shows the number of records, which at the moment will be something like "6 of 65211".

The actual sheet only has a few hundred rows (not 65211). So how do I delete all the blank rows beneath my data using a macro or vba code?

As an extra point, I'd like to use column B to check for blank rows (not column A).

View 6 Replies View Related

Insert Multiple Rows

Oct 29, 2009

Need code to insert multiple rows. I would like to be able to click a command button and have the number i have entered in a textbox be the number of rows inserted in the spreadsheet above a static cell like A12.

View 2 Replies View Related

Insert Rows On Multiple Sheets?

Apr 2, 2008

I need to figure out a way to automatically insert rows and copy data on multiple selected sheets. for example, if i insert a row anywhere on sheet 3, i need that same row inserted in the same location with the cells populated with the same data on sheets 4, 6 and 9.

View 9 Replies View Related

Insert Multiple Rows And Label Accordingly

Oct 27, 2009

in inserting 8 rows as per the attached spreadsheet highlighted in orange, and labelling them, obviously, the year after the one above it.

View 10 Replies View Related

Insert Multiple Rows After Each Row Of Text?

Dec 1, 2011

I have a spreadsheet with about 10,000 lines/rows of text and I want to insert 4 lines/rows under each of these. way to do this efficiently without having to insert under every line/row?

View 9 Replies View Related

VBA To Insert And Delete Multiple Rows

May 30, 2009

Does anyone have codes to insert and delete multiple rows. I need to run a macro where a dialog box pops up requesting number of rows to insert and delete.

View 9 Replies View Related

Insert Rows On Multiple Sheets

Apr 2, 2008

way to automatically insert rows and copy data on multiple selected sheets. for example, if i insert a row anywhere on sheet 3, i need that same row inserted in the same location with the cells populated with the same data on sheets 4, 6 and 9.

View 9 Replies View Related

Insert Numbers Before Data In Multiple Rows

Jan 7, 2009

I have a string of numbers ex. 1234, 5678, 91011 in 400 rows. Before each string I would like to add 88.

View 4 Replies View Related

Insert Rows Between Data For Multiple Tables

Dec 12, 2013

I need to insert a blank row between each row of data under my headers (not the immediate row) until I reach the end of the particular table. I then move down to the next header and repeat the process.

My starting data looks like this:

HEADER
DATAROW1
DATAROW2
DATAROW3
-emptyrow-
HEADER
DATAROW1
DATAROW2
DATAROW3

I need it to look like this:

HEADER
DATAROW1
-emptyrow-
DATAROW2
-emptyrow-
DATAROW3
-emptyrow-

[Code] .....

View 3 Replies View Related

Copy Data Into Multiple Rows Using Macros And Insert Zero

Apr 21, 2014

I'm new to Macros and below is my requirement.I need to split my data into multiple rows based on count and the first row should have the value but the other rows should have a value as zero.

Input

Count Value
1 400
2 101
3 300
4 450

Output

Count Value
1 400
2 101
20
3 300
3 0
3 0
4 450
4 0
4 0
4 0

View 4 Replies View Related

Insert Multiple Blank Rows At Designated Cells

Jun 13, 2014

I have a large list of cells in excel: 15, 33, 90, 102, 149, 159, 217, 228, 238, 247, 305, 312, 369, 417, 428, 486, 538, 548, 606, 621, 671, 679, 737, 805, 816, 874, 915, 923, 981, 1029,1038 .

Under each of these cells I would like to insert 20 blank rows. I have tried various codes but i'm struggling with the fact that as soon as I insert 20 rows at cell 15, all the other cellnumbers change.

This is a reformulation of this post: [URL] ...........

View 1 Replies View Related

Insert Multiple Rows Depend On Cell Value Getting Error

Mar 21, 2014

I am trying to add insert rows using macro.

L column fills with numbers. if L1 value is 5 then below need to insert 5 rows.

I tried below Macro.

But it getting Error.

Sub InsertRowswork1()

Dim LastNumber As Long: LastNumber = ActiveSheet.Range("L" & Rows.Count).End(xlUp).Row
While LastNumber >= 2
If Not IsEmpty(ActiveSheet.Range("L" & LastNumber)) Then

[Code] .....

View 6 Replies View Related

Macro To Insert Rows..

Oct 31, 2009

I have a worksheet that includes the list of buildings in an area and the number of households in each building. I want to list the households on separate rows and to number them from 1 to x according to the total number I have. Is it possible to do this using a macro, if so, how?

View 5 Replies View Related

Insert Rows By Macro

Jan 18, 2010

I've created a macro to assign to a button that inserts a row above say row 10, then another macro to assign to a different button that inserts a row above row 20. My problem is, having clicked the first button a row is inserted above row 10 but of course row 20 now becomes row 21, so now I need the second button to insert a row above row 21 instead of 20.

Is there any way I can write a macro that remembers the old row numbers?

View 14 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved