How can I get a vertical lookup or sumIF formula to check multiple tabs for a given value?
Or - is there a way to specify the tab? For instance, put "Tab A" or "Tab B" in Cell A1, and have the lookup formula reference the value of Cell A1.
I have a summary page that includes the titles for each tab within the excel 2003 workbook. I want to use the names of the tabs in the summary page and create it into a formula to lookup fixed cells within the various tabs. Sorry for not uploading an excel doc but I was at work earlier and the thread did not load for some reason, so I am reposting it.
View 3 Replies View RelatedHow can I sumif over multiple tabs?? Without using sumif(a:a,sheet1!a1,c:c)+sumif(a:a,sheet2!a1,c:c)
Like sumif(sheet1:sheet2!a:a,a1,sheet1:sheet2!c:c) I do not want to use a macro. I have about 80 sheets.
Sheet1
Apples 93
Pears 49
Oranges 20
Bananas 35
Sheet2
Apples 100
Pears 13
Oranges 2
Bananas 350
I am looking for a formula that would lookup multiple values/result, corresponding to one given value. I have attached a spreadsheet.
Column A and Column B consists of data set.
Column J has the "LOOKUP VALUE"
Column K is where we want the lookup results. We would require the result to be in ascending order which would determine the distribution.
Example1.xlsx
I have a RAW DATA work sheet that has data of electricity consumption for a given week but it is in a vrtical table.
I have many other work work sheets in the workbook that I require to look at the RAW data and the return the correct information in the specified cells
I need the store number that is in cell F1 of each sheet and the Date on each sheet that are on Row4 of each sheet to Look up and match the information in ROW1 for the store number and columnA for the dates.
then in columnB of RAW DATA I have time intervals of 30mins which need to match up with the time intervals on the sheets and display the readings from the RAW data on the sheets.
******** ******************** src="http://www.interq.or.jp/sun/puremis/...<CENTER><TABLE cellSpacing=0 cellPadding=0 align=center>Microsoft Excel - Energy Analysis WE15-03-09.xls___Running: 11.0 : OS = (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA2A3A4A5A6A7A8=ABCDEFGHIJKLMNO1Reading DateReading Time8912116617118519682296710191119125612571292209/03/200900:0012.5926.74929.69668.728.6487.526.5616.2312.6416.3818.08317.02719.569309/03/200900:3011.8467.211.49610.1245.8726.821.817.9811.3216.711.96214.65619.243409/03/200901:0010.7368.11211.19811.286.27.415.2330.3412.0416.269.5527.26429.02509/03/200901:3010.78767.612810.68510.40725.6966.814.888.936.8416.618.53448.72645.4432609/03/200902:0011.0727.235213.01310.3235.9288.814.757.875.9218.059.38247.09445.3136709/03/200902:3011.2996.819210.26210.1765.70410.414.758.135.0916.489.0566.88325.1984809/03/200903:0011.8116.18248.952411.3695.88.314.697.774.9916.87.20964.71046.2496RAW DATA [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
How do I get a function to check cells on multiple work sheets.
For example this function searches for the word "hello" in cells, A1 to A50 and then adds up the number in the corresponding cells where "hello" is found from C1 to C50:
=SUMIF($A$1:$A$50,"=hello",$C$1:$C$50)
Two questions:
01) How do I search the same cells in two further work sheet, "Sheet2" & "Sheet3"?
02) Is there a way to search every cell in an entire work sheet?
I have a workbook with 5 or more tabs. One of the tabs is a CONSOLIDATION of all the tabs put together. I have columns on the consolidation tab with the names of the individual tabs. To the left of these columns is a list of general ledger numbers with their respective names. For example:
East West NE South
6103256 –sales
6540000 -salary
510000-travel
I want a excel to look at the individual tabs, for this specific gl number and name and, if applicable, return a value. What formula would do this?
My columns are not showing up correctly. East,West etc are the columns. 6103256 - are the rows
I am trying to lookup two distinct values in two columns (turquoise and green) in 'Cust data' tab and correlate them to the same values in two columns on 'Driver activity' tab, then return a result from column in yellow on 'Driver Activity' tab to populate the driver name in yellow column on 'Cust data' tab.
File is attached.
I need to add the total of staffs hours worked for one day, but the problem is that I don't recieve the data as hours but as symbols(letters of the alphabet) representing time worked. Eg "A" is 3.5 hours, "B" is 4hours "C" is 4.5 hours ect, ect.
In the example the top table is a one month time sheet for each staff and there working shifts. The bottom table is the part that I need a formula for. I need a total for each symbol for each day so I can total the hours at the bottom where it says total hours. I have given an example on how the bottom table should look when the formula is completed.
I need a solution for the equivalent of a SUMIF combining both vertical and horizontal data. The vertical cells align to the horizontal ones, but they're in a different table.
My attempted formula is: =SUMIF($H$22:$H$30,"TRUE",D7:L7)
*note that this is just an example set of data...my real data set is much larger (both rows and columns)
I need to be able to do this without transposing any of my data.
Things I've tried:
- Another option I tried was making D7:L7 a named range and using the transpose function (as an array) within the SUMIF formula above. I received an error.
- I tried using a bunch of IF statements added together (i.e. =IF(H22=TRUE,D7,0)+(H23=TRUE,E7,0)...); this actually works properly, but I get the "formula too long for cell" error when I put them all in (too many characters)
I'm using excel 2003 and windows XP professional.
I have a table with
Column A - Suppliers
Columns B to M products with a product group (in row 1)
Prod Group..Core.......Core........Outer........Inner.........Core
Supplier......Type A......Type B.......Type A........Type B.......Type C
AB Ltd........1000.........2000..........500.............750...........5000
CD Ltd........3000.........5000..........100.............950...........8000
AB Ltd........2000.........4000..........600..............800..........7000
I would like to know how to sumif when for eg supplier is "AB Ltd" and the product type is "Core" in this eg = 21,000 (how to paste a table)
Use look up to check batches of data a return a value dependent of multiple ifs?
I have this formula from here
=LOOKUP(COUNTIF(C4:C7,""&0),{0,1,2,3},{19.9,29.9,39.9,49.9})
What I am trying to achieve is using the above can it check
C4:C7 Grouped and named "first"
C8:C10 Grouped and named "second"
C11:C13 Grouped and named "third"
If one from each group is selected it returns 1 value, if 2 of each are selected it returns a second value and if 3 of each are selected it returns a third value?
I thought by grouping them it may give me the desired results but all it does is change if I select more than one from any of the groups.
I'm a bit over my head on this one. I want a formula that does the following: Look at the date I put in on the last tab and find the correct date on the other tabs. Using that date as the column I want it to return the correct row for the data.reference.
I am using the HLOOKUP function. I'm not even sure this is the right function. Ont the workbook attached I'm trying to get the data on the Totals tab to come from the Sept Wk 1 through Sept Wk 5 tabs. The formula I tried to use is on the Totals page C7.
I'm trying to come up with a Macro that once it see's the word "Rolls" in column M, I would like for it to go to the row below the word and divide the information on column K by 30
then for it to perform this formula for the next 17 rows and on the last row have the cell in gray color.
Then for it to keep doing this recursively down the column of the sheet and once finished to go to the next tab and do the same algorithm(there's like 40 tabs !!)
is there any way for a sumif formula to have multiple criterias? for my case, after the formula checks for a condition, it has to check for another condition before summing up the figures.
this is my current formula:
Can anyone tell me what is wrong with the formula on page 1 cell F56? it is not adding the 666 gallons at the end of column F for 426 - cc. Any ideas?
View 11 Replies View RelatedI was wondering if it's possible to create a macro that would check the range horizontally and vertically and return the resoults in a userform so that when workbook is open this userform would come up with the information who is due for refresher....
The sample book doesn't show the real size of the original matrix which has 190 employess and about 30 procedures so as you can imagine it's a pain.. to keep it up to date so I need something to flag that for me, yes I can see the red cells but still there's so many cells that I might easly miss some of them....
I need to pull up the invoiced revenue by customer and month into Spreadsheet 1 from Spreadsheet 2, vlookup wont work and nested index and match wont work.
Spreadsheet1
Spreadsheet2
Is it even possible to create an IF/AND formula that draws data from multiple tabs?
For example,
(assume there are tabs named exactly the same as each of the data entries in column A)
IF A2 = "ARI" then D2 = ARI!H3. Is this possible?
SUMIF function. I am looking to build on this original formula but neither the SUMIF or SUMIFS formulas are working...here what it is:
I am looking to create a formula that will all up the figures based on the criteria within a specific date range - for example by selecting Company A and Workshop in Feb 2011 it will return £1678.75
I've also tried IF functions within SUM functions but can't get it to work.
See attached for a clearer view : LOOKUP SEARCH.xlsx‎
View 10 Replies View RelatedI've got the following complex issue:
...................Trader1 Trader 2 Trader 3 Trader 4 Trader5... Trader20 (Horizontal)
Commodity1 .....0.....2.....0.....1.....1
Commodity2 .....0.....4.....0.....-3.....0
Commodity3 .....1.....0.....0.....5.....0
Commodity4 .....0.....0.....2.....0.....0
.
.
.
Commodity 36 .....2.....1.....1.....0.....0
I have 5 cells that are basically a drop down list of all the traders, so the user can select up to 5 traders.
Once the user selects up to 5 traders (lets say Trader 1, 3 and 5 for our example) I have the following requirements to fulfill:
Displaying all commodities that have non-zero, non-negative values associated with those traders in a list somewhere.
For our example, this would then display:
Commodity 3
Commodity 4
Commodity 1
I have a problem that lookup vertical and horizontal corresponding values when there was duplicate values as it's only returning the first value found. What I want was to lookup the vertical and horizontal corresponding values on the left most & top most column based on the largest values column and also to return the duplicate values under the vertical and horizontal value column in ascending order if it's a duplicate values.
View 4 Replies View RelatedI have a table where I need to return a value according to THREE conditions:
1. Vertical, which is a shop code for instance
2. And 2 horizontal:
- One: segment (heading level 1)
- Two: product (heading level 2)
E.g. for "Shop1", what's the value for segment "PI" and product "Credit", etc.
An example file attached : fz73m5zEmZS6Y14-C.xlsx‎
The key thing for me is to do this WITHOUT changing data structure, because that really would be a huge pain. I mean, if it's no possible to do without changes (e.g. adding an extra column, etc.), I'll have to live with that I guess. But ideally I would really like to avoid changing data structure.
I would like to have a formula in one cell that finds records on another sheet that meet certain criteria, and produces a sum of the total quantities associated with that record. The attached workbook has more details as to what I am trying to do.
View 2 Replies View RelatedI am trying to use the SUM IF Array formula to sum a group of numbers that fall under a heading of reference numbers over several sheets of data. For example purposes lets say my spreadsheet looks something like the below.
A
B
C
D
E
1
2600000248391
2600000393805
[code]......
The first two digits of the heading numbers are the criteria I am trying to use to separate and sum the data. For example I need to sum the value of the data below headings that falls between 1400000000000 and 1499999999999.
For the example above I used the below formula for the current Sheet and it works fine.
{=SUM(IF(A1:E1>="1400000000000",IF(A1:E1="1400000000000",IF(Sheet1!A1:E1,Sheet2!A1:E1
I've got a SUMIF formula that works but will be complex to expand. Excel 2007
A10= SUMIFS(b2:b4,a2:a4,">="&B6,a2:a4,"="&B6,c2:c4,"="&c6,a2:a4,"="&c6,c2:c4,"
comp1.PNG
Attached is a screenshot. Basically I need to know that if PersonA has say 13.74 CPH and $776 DPH - what the incentive would be ($575)...
Excel - 2010
I have the following formula:
=SUMIFS(FEB!TRANS_Cost,FEB!TRANS_Cat1,CAT_Main3,FEB!TRANS_Cat2,"Computer Items",FEB!TRANS_Status,"Paid")
TRANS_Cost = B:B on FEB tab
TRANS_Cat1 = C:C on FEB tab
TRANS_Cat2 = D:D on FEB tab
CAT_Main3 = "Everyday_Expenses"
TRANS_Status = E:E
In short the formula adds the total cost of anything 'tagged' as Everyday_expenses, computer items, paid. I want to adapt it so that it takes the value from a defined cell such as Month, so that data can be pulled by month.
In column CT between rows 11:210 is the vertical data that includes duplicates. I am looking to create a formula that can lookup each value between CT11:CT210 and return only the unique values horizontally starting in cell CW9 and onwards.
Example: CT11:CT14 looks like
5x20
6x4
5x20
5x8
and so on and so forth..
I would then like this formula to return the above data (which goes all the way to CT210) in this format starting in cell CW9 - 5x20 then CX9 - 6x4 and finally CY9 - 5x8.